Error while filling the set up table for 2LIS_11_VAITM
Dear Experts,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code for sales org 9000 does not exist (document 1326)".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...
in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
you'll have to enter at least '1' here in your case
it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
(under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)
Similar Messages
-
Error while filling up set up tables in SAP R/3
Experts,
I trying to fill up set up tables for application component 11 (SD) for my LO extraction. It gives me the following error
<b>Error determining rate: foreign curr. RMB local curr. AUD date 06/19/2007 (doc. 100025787)</b>
when I check in RSA3, I have data before 06/19/2007 but nothing is filled up after that.
Does anyone know how to fix this?
Thanks
AshwinHi Ashwin,
Did you get the solution for issue(filling the setup tables for applicaion component 11)
"Error determining rate: foreign curr. RMB local curr. AUD date 06/19/2007 (doc. 100025787)"
thanks in advance.
Bhaskar. -
Error when Filling the set up tables
Hi Friends,
I'm trying to fill 2LIS_03_BF, I think it is not mandatory giving selection criteria rigt!! I have 2 issues here
(1) when I give no selection criteria, no records are getting loaded
(2) When I give the slection criteria , I'm getting a message " Plant 6001 Doesnot exist".
How should I handle this?? I need to fill this extractor, can someone help me,
Thanks in advance,Smily,
no need to give Selection criteria. may sme other field you are missing (either run name or termination date etc).
No need to fill posting date or document number... it's not mandatory.
all the best.
Regards,
Nagesh Ganisetti. -
Error while deriving the currency from table T001P.
Hi Friends,
I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
Could you please help me as to where this error can be corrected.
Thanks,
ManjAbout the incidence, the problem might be related to the links between
personnel area, company code and currency set up (table T001P, T500P and
T001).
Please check the following points:
1- Have you assigned the Personnel area to the Company code under SPRO -
IMG -> Enterprise Structure -> Assignment -> Human Resource Management
-> Assignment of Personnel Area to Company Code.
2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
Determine Currencies (Public Sector Currency Need to be maintained along
with the other node).
3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
Basic Pay -> Define Hourly Rates for several decimal places. (Please
maintain all the nodes).
4- Maintaining the table t500c through transaction code OE00.
Regards
Ramana -
Filling the set up tables
I am mentioning here the run name, Termination date & time ( time how many minutes I have to increase is it like that for these many records these much time we have to mention) I say execute ,it is giving me the error
Error determining rate foreign currency INR local currency
Eur date 02.01.1997(doc 4969)
What I should do to solve this
what I did is I specified the doc no from 33 to 4968
& executed then it is asking for archive session, what is this archive session & is it mandatory to specify the archive value ,if so what value I should specify in that
Thanks in advanceHi,
<i>Error determining rate foreign currency INR local currency
Eur date 02.01.1997(doc 4969)</i>
Here the Curency conversion factor maybe missed in R/3 .Show this error to your FI functional peoople to slove this.
With rgds,
Anil Kumar Sharma .P -
Filling of set up tables for several company codes
hi
i am filling a set up table for the application specific inventory control statistical data. But while setting up data filling selection parameters contains selection parameters for the single Company code.
But in my scenarios there are several company codes whose data resides in the R/3 and i need to bring data for all company codes in the set up table.
so now filling up the data in set up table, shall i have to fill up data for individual company code, OR i have to fill data for one company only and on delta load data pertainig to other company codes will be populated to the set up tables.
kindly give ur expert advice in this situation.Hello,
i dont understand why should it be mandatory to fill the company code on r/3 side while initialisation!!
But even if it is mandatory, u have to do one by one init runs on R/3 side for all company codes that you need.
Check in rsa3 for records after the init runs.
If it was not mandatory, u could have run the setup(init) run on r/3 side for all company codes at a time by keeping the field blank!!
Also again in the BW side you can have company code for selection in the infopakage!! there u can also have it as a range rather than running for one at a time.
Hope it is helpful now..
regards, -
How to extract data into the set-up table for 2LIS_06_INV LIS structure
We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction' -
Error while deriving the currency from table
i am getting the below error while simulating the payroll for india.
Error while deriving the currency from table T001P & Error during Initialization of payroll.
i am SAP HCM Trainee.. practicing at home.Pls check the currency in table T500C.
You can use TCode OE00 for table maintenance T500C.
Also check whether currency is there in table V_CURC and T510.
Hope this will help.
Regards
Ghouse -
Filling of set up tables for Full and Delta updates
Dear Gurus,
How do I go about filling the set up tables if I want to load historical data to BW using LO **** pit when set up table is running on delta ?
I want to know how many set up tables will be there for each data source, Because if set up table is running on delta and using the same table I want to load historical data also then will I have to delete and fill set up tables or there will be a separate set up table for full upload and delta ?
If we have multiple set up tables for one data source then in the T-code OLI*Bw, where * -> App logistics num, so to fill I just say OLI6BW, then which set up table it is going to refer.
Clarify my doubt and get rewarded with plenty of points.
Regards
MohanHi,
Filling up the set up tables depends on the datasource.
there are different T-codes for the respective extract structures
OLIIBW transaction PM data
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
OLI7BW is the tcode for Sales Order.
Hope this solves Ur issue....
Assign points if helpful..
Rgs,
I.R.K -
How to fill up set up tables for 2lis_03_UM and BF?
Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanksHi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM -
Error while getting the ORACLE user account for your concurrent request
Hi ,
When I am submitting the Concurrent Program from OAF page Iam getting
Error
Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
When we will face this error.
Not able to submit the Request
KrishnaKrishna
Try like this
public int submitCPRequest(String shipmentId) {
System.out.println("into submitCPRequest");
try {
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
String applnName = new String("XXAPL"); //Application that contains the concurrent program
System.out.println("ApplName"+ applnName);
String cpName = new String("SHIP_REQ"); //Concurrent program name
System.out.println("Concc Name"+ cpName);
// String cpDesc = new String("Shipping Request"); // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the
//vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(shipmentId);
System.out.println("Args"+ cpArgs);
After this it is going into exception
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, null, null, false, cpArgs);
System.out.println("Req Id"+ requestId);
tx.commit();
return requestId;
catch (SetDeferredException e)
throw new OAException("SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e) {
System.out.println("Into Exception");
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
}Thanks
AJ -
Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar. -
Dump error while filling the Setup table
Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_03_BF datasource, i got the Dump error after some time. I have checked the data in Setup table and found 9000 records.
Shall i proceed further by pulling the data from R/3 to BW.I have checked the data in RSA3 and got some data.
Shall i schedule the data from BW side.
Pls help on this issue.
Thanks,
Siva.Thanks Reddy and JS.
I have checked the TCODE SM37 and found no jobs are available. I have checked the TCODE : NPRT and found some logs.In this, it is not showing any errors.
I have checked in SM21 and found some errors.
Time_______________Text
17:08:10____________Transaction Canceled M2 630 ( )
17:23:47____________Run-time error "TIME_OUT" occurred
17:23:47____________> Short dump "090302 172347 sand1_W2 2_00 " generated
17:30:08____________Status: 80% of IL00.DAT is in use
17:30:17____________Status: 90% of IL00.DAT is in use
17:30:18____________Overflow of Paging File (032768 Blocks)
17:30:18____________Run-time error "MEMORY_NO_MORE_PAGING" occurred
17:30:19____________> Short dump "090302 173018 sand1_W2 2_00 " generated
Shall i execute filling the setup table again. Do i need to give termination time More ( 2 Hrs difference)
Any issue on refilling the setup table again.
Pls suggest.
Thanks,
Siva. -
Error while calling the Mapping function module for BW Extraction
Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
<b>Short text</b>
Type conflict during structure parameter transfer at CALL FUNCTION.
<b>What happened?</b>
Error in the ABAP Application Program
The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
<b>Error analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
LeonDear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 876
Module type (FORM)
Module Name PDF
Trigger Location of Exception
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 894
Module type (FORM)
Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks -
Error while executing the reversal in KO88 for an internal order
Hi Experts,
I am getting the below error while doing the Actual settlement : order reverse through t code KO88. we are currently using the SAP ECC 5.0 and i found the SAP notes 215944 and 335428, which are upto release 4.6C.
System error - deletion not possible
Message no. AAPO186
i can see that the doc has generated for the settlement and for reversal it is giving the error. Can some one help me who has faced this type of problem earlier.
Thanks & Regards,
VenkatHi,
Additionally, try to check 300273 note.
Regards,
Eli
Maybe you are looking for
-
Photoshop 2014 Program Error in text
I am currently using photoshop CC 2014. And sometimes when I am tying text, or copy/pasting text into the PSD file, an message would pop up that I "Could not complete your request because of a program error" After which, I would be totally unable to
-
Ipod touch 3rd generation does not sync with itunes 12
I upgraded iTunes to iTunes 12 and now my 3rd generation 64GB iPod Touch does not sync but 8 songs, even though the entire library is checked. I had removed all songs to reorganize the iPod but afterwards I was no longer able to re-sync the iPod Tou
-
Server App can't connect to a Mountain Lion server
Hi, I installed OS X Mountain Lion Server (2.2.1) on a 2012 Mac Mini running OS X 10.8.4. I am able to access all the options using the Server.app on the Mini. Then I installed the Server.app (2.2.1) on a 2010 MacBook Pro running 10.8.4. On trying to
-
Stop JScrollPane from scrolling
Hello, I am trying to improve a special editor i have written. Now I tried to add line numbering to it and got stuck. Here's what I did: I have a JScrollPane that contains a JPanel. This JPanel has a BorderLayout and contains a JTextPane (where the e
-
How to create several colums if many rows
Hi, I have a problem with finding a technical solution. If I have more than 30 records, I want to put them in the next column. How do I do this in xsl (HTML output): |PCS|REV|DATE | |PCS|REV|DATE | | 1 | 1 |xx.xx.xx| | 5 | 1 |xx.xx.xx| | 2 | 1 |xx.xx