Error while generating ABAP proxy

Hi,
We created a WSDL using lotus notes (Domino) tools. While creating a proxy object using ABAP (transaction SE80), we get the error message "Cannot generate proxy (object  missing in WSDL, see long text)"  Message no. SPRX084.
We looked at OSS notes and applied 1046046 - Proxy generation problem with external definitions and all dependent notes as we are on a lower support pack. (WAS 6.40. SAPKB64019).
We are wondering if it is anything to do with the format/defintions in the WSDL. Can anyone send me a sample WSDL file that has been used to create an ABAP proxy object successfully. We would like compare the domino generated file.  Please note that XI is not involved, we are using ABAP to call a webservice in the internal network application.
Thanks,
Girish

Hi,
I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
Best regards
Marcin Cholewczuk

Similar Messages

  • Error while generating ABAP proxy client

    Hi,
    I want to consume a webservice.
    webservice URL is http://www.w3schools.com/webservices/tempconvert.asmx?WSDL
    I can import WSDL in soapUI and get the response.
    But while generating proxy in SAP, ( SE80 -> Enterprise Service ->service consumer -> URL/HTTP Destination -> URL -> local object -> complete ) it throws the following error:
    Exception occurred in communication framework:Error in HTTP
    Framework:404conn failedhttp://www.w3schools.com/webservices/tempconvert
    .asmx?WSDL
    Thanks in advance,
    Rajkamal

    Hi,
    I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
    Best regards
    Marcin Cholewczuk

  • Error  while generating client proxy

    Hi All,
    I have got a WSDL file for which I am generating the client proxy. It is giving me a dump saying that, memory is not sufficient while generating the proxy.
    I have also contacted the basis team, even after increasing the memory... we are facing the same issue. Can anyone suggest any solution or SAP Note if there are any???
    Thanks in advance.
    Bhargava.

    Hi,
    Please find the dump details below:
    ST22 DUMP:
    Short text
        No storage space available for FORM stack.
    What happened?
        Each transaction requires some main memory space to process
        application data. If the operating system cannot provide any more
        space, the transaction is terminated.
    What can you do?
        Note which actions and input led to the error.
        For further help in handling the problem, contact your SAP administrator
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.
        Try to find out (e.g. by targetted data selection) whether the
        transaction will run with less main memory.
        If there is a temporary bottleneck, execute the transaction again.
        If the error persists, ask your system administrator to check the
        following profile parameters:
        o  ztta/roll_area            (1.000.000 - 15.000.000)
               Classic roll area per user and internal mode
               usual amount of roll area per user and internal mode
        o  ztta/roll_extension       (10.000.000 - 500.000.000)
               Amount of memory per user in extended memory (EM)
        o  abap/heap_area_total      (100.000.000 - 1.500.000.000)
               Amount of memory (malloc) for all users of an application
               server. If several background processes are running on
               one server, temporary bottlenecks may occur.
               Of course, the amount of memory (in bytes) must also be
               available on the machine (main memory or file system swap).
               Caution:
               The operating system must be set up so that there is also
               enough memory for each process. Usually, the maximum address
               space is too small.
               Ask your hardware manufacturer or your competence center
               about this.
               In this case, consult your hardware vendor
        abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
               Restriction of memory allocated to the heap with malloc
               for each dialog process.
        Parameters for background processes:
        abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
               Restriction of memory allocated to the heap with malloc
               for each background process.
        Other memory-relevant parameters are:
        em/initial_size_MB:         (35-1200)
               Extended memory area from which all users of an
               application server can satisfy their memory requirement
    Error analysis
        You attempted to extend a stack, but the required storage spac
        not available.
        Storage request..............: 8450048 bytes.
    How to correct the error
        Please check whether uncontrolled recursive calls caused this
        runtime error.
        Try to decide by analysis whether this request is
        reasonable or whether there is a program error. You should pay
        particular attention to the internal table entries listed belo
    System environment
        SAP-Release 701
        Application server... "dcr"
        Network address...... "10.1.105.112"
        Operating system..... "AIX"
        Release.............. "6.1"
        Hardware type........ "00C834224C00"
        Character length.... 16 Bits
        Pointer length....... 64 Bits
        Work process number.. 4

  • Error While Generating the Proxy Objects

    Hi All,
    While Generating the Proxy Obects in SPROXY at SAP R/3 side,
    Iam getting this Error
    http://img169.imageshack.us/img169/5752/proxylm0.jpg
    Can any one Occured this type of Error
    Regards
    Suman

    Hi PT,
    Now the Strange Issue came,
    While generating the proxy objects i got that above mentioned error
    After that i have run the 3 report programs according to the Ramesh Suggession
    Now if i goto SPROXY means it is saying that No Conection to Integration Builder .
    I have checked the RFC Destination created in SM59 of SAP R/3 of Type H.It is fine
    What more i have to check
    First of all when ever i open the Sropxy, every time User & pwd is requesting
    Can you please through a light where to check
    Regards
    Suman

  • Error while generating new proxy-client

    Hi,
    I'm trying to generate a proxy-client from the following WSDL file: https://www.anlagenkataster.de/opencms/services/ZuesService?wsdl=1.1
    Unfortunately the generation aborts everytime I try saying:
    "Exception occurred in library handler
    Incorrect value: Unknown Namespace http://schemas.xmlsoap.org/soap/encoding/"
    I also tried the WSDL using SoapUI and it works fine...
    Has anyone an idea how I will get ABAP to generate the client?
    Thanks,
    Dennis

    Change encoding name space
    <import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
    to
    <import namespace="http://schemas.xmlsoap.org/soap/encoding/" schemaLocation="http://schemas.xmlsoap.org/soap/encoding/"/>
    After that also you will get error communication framework error then use below thread
    Error in HTTP Framework: 404conn failed

  • Error while activating ABAP proxy object

    Hello,
    I can see all the interfaces of PI7.0 in my ECC6.0 system.
    I am able to create abap proxy object of a interface.
    But when I try to activate that I am getting error as
    "RFC system error for destination GTADIR_SERVER".
    Pl can you suggest. appreciate quick help in this.
    thanks in advance,
    Sharada

    Hi,
    For more details take a look at note:  [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
    It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
    To get rid of this annoying error you have to implement the corresponding  support package.
    Regards,
    Jakub

  • OBJECTS_OBJREF_NOT_ASSIGNED  error while executing ABAP proxy

    Hi ,
    I am getting the following error when i try to execute an abap proxy .
    Unit ID in Background RFC     001EC9D184F702ECAA8DBC7401DC13E0
    Name of First Function Module     SRT_SEQ_SCD_DLV_TRM_QRFC_NEW_C
    Inbound Destination Name     WS_SERVICE_02DCA4961A0B_IN
    Transaction Code                     SE38
    Name of qRFC Queue                     SRTQC_001EC9D184F702ECAA8DBC6FE29753DB
    Created On                     28.01.2009
    No. of Predecessors                   1
    Created At                                    12:44:10
    Executed At                     12:44:13
    Created At (Time Stamp)     20.090.128.114.410,9989340
    User name                                     DEVELOPER
    Tcode/program                      CL_SOAP_SCHEDULER_QRFC_NEW====CP
    ID of Lock in Background RFC     001EC9D184F702DCAA8DBCA25EC41F5E
    Lock Reason                     System error; not executed
    Background RFC Scheduler ID              1
    Message number                       341
    Language Key                            EN
    Status Text                               Unit has execution errors
    Execution State                             Access using a 'ZERO' object reference is not possible.
    Number of Called Function Modules     1
    Number of Locks                                    1
    Commit Check Disabled               X
    Message Class                                  0
    Message Variable                             OBJECTS_OBJREF_NOT_ASSIGNED
    Executed On                             28.01.2009
    and in ST22 transaction i am getting the following dump
    Runtime Errors  : OBJECTS_OBJREF_NOT_ASSIGNED
    Exception         :CX_SY_RF_IS_INITIAL
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
         caught in
        procedure "WSRM_CLONE_FOR_SPECIFIC_OPS" "(METHOD)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        An attempt was made to access a component (variable: "ME->M_CTX") with a 'ZERO'
        object reference (points to 'nothing').
        An object reference must point to an object (an instance of a class)
        before it can be used to access a component.
        Either the reference has not yet been set or it was set to 'ZERO' using
        a CLEAR statement.
    Please help in solving this issue.
    Thanks&Regards,
    Hamsa Shree

    Hi
    Runtime Errors : OBJECTS_OBJREF_NOT_ASSIGNED
    Check with the SAP Notes Note
    557770 - SAP BP: Short dump OBJECTS_OBJREF_NOT_ASSIGNED
    may be you get the exact help
    Regards
    Abhishek

  • Error while create abap proxy

    Hi,
    I need to create abap proxy in sap system to push the data from sap system to XI.
    when i create ABAP PROXY in sap system in Tcode SPROXY,System displays a error
    "objects from other name spaces missing" .
    So i am not able to activate the abap proxy.
    kindly let me know how to solve this error.
    Regards,
    Ganesh

    Are you using the message type created in external system?
    Are any of your Data type element refer structure to other namespace.
    Error mention that it does not find the detail structure of any of Datatype element. Check all link are available properly.
    Gaurav Jain
    Points if answer is helpful

  • Error while generating WebService Proxy..!!

    Hi...
    I am getting an Error when i try to generate a Web-Service Proxy on JDeveloper for one of the Oracle WorkFlow Services viz., the[b] "TaskService"
    ie.,
    http://host:port/integration/services/TaskService/TaskServicePort?wsdl
    The wizard exits with a fatal warning ( WS-30033 -- Validation of WSDl failed?!) saying
    "uniqueness constraint violation : exception (taskProxy.proxy.faultType already exists)
    Could Anyone please Help me w.r.t this..?!?
    [By the way, ALL this is w.r.t. the [b]10.1.3.1.0 version of[b] Oracle SOA Suite...]
    Awaiting some response....

    The same problem was encountered by be.
    The WSDL is correct and WS-I compliant. The limitation lies with the code generator. I was not really thrilled to see the error.
    Used this to find out where the wsdl was failing:-
    java -jar wsa.jar -analyze -debug -wsdl "D:\WFTask\TaskService.wsdl"
    The problem was
    <element name="staleObjectFault" type="tns:faultMessageType"/>
    <element name="operationErroredFault" type="tns:faultMessageType"/>
    in TaskService.xsd.
    For the workaround I copied (faultMessageType) and created a new complexType
    <complexType name="faultMessageType2">
              <sequence>
                   <element name="faultInfo" type="xsd:string"/>
                   <element ref="task:task"/>
              </sequence>
    </complexType>
    and changed the element defination to
    <element name="staleObjectFault" type="tns:faultMessageType2"/>
    Problem resolved. Generation successful. Yet to test at runtime.
    Hope this helps.
    Sashwat
    http://tech-sash.blogspot.com

  • Please Help needed...Error while generating WebService Proxy..!!

    Hi...
    I am getting an Error when i try to generate a Web-Service Proxy on JDeveloper for one of the Oracle WorkFlow Services viz., the[b] "TaskService"
    ie.,
    http://host:port/integration/services/TaskService/TaskServicePort?wsdl
    The wizard exits with a fatal warning ( WS-30033 -- which i believe indicates Validation of the WSDL failed..!?!) saying
    "uniqueness constraint violation : exception (taskProxy.proxy.faultType already exists)
    Could Anyone please Help me w.r.t this..?!?
    My requirement is to provide a UI for accessing Human WorkFlow Services...other than JSP...So, i am planning to create a Web-Service PROXY for the important Workflow Services like TaskQueryService, TaskService, etc...& then use the "jars" of these clients to invoke the Web-Services...!
    Is there ANY Simpler method of doing this..?!?
    I've seen the Code of the UserSampleUI application, but i can't get a similar code working in my Eclipse...don't know Which JARS are required...?!
    [i tried bpm-services.jar, & others...but it gives me a run-time exception of type PC Exception...!! :(]
    If so, please Do let me know ASAP...!!
    [By the way, ALL this is w.r.t. the [b]10.1.3.1.0 version of[b] Oracle SOA Suite...]
    Awaiting some response....
    Thanks a lot in advance..!

    Hi Calvin,
    You may want to try the 'no data binding' option on the proxy generation. This may enable you to go ahead, with a proxy that is not trying to generate Java code.
    Yo can also try to make a local copy of your WSDL and remove the duplicate type declaration. Using the analyze command from WSA CLI is a quick way to do this itterative testing, as it will not generate the code. Once you have the analyze command going thourg the WSDL, you can go back to using genProxy.
    You can find the documnetation here:
    http://download.oracle.com/docs/cd/B32110_01/web.1013/b28974/wsassemble.htm#CHDBBDBF
    Hope it helps,
    -Eric

  • Dynamic type conflict during the assignment of references. - Error while generating proxy in the backend

    Hi All,
    I get a short dump while generating a proxy in the backend.I give the package and the prefix and end up with a short dump.
    Does any one know why this mught come up
    "Dynamic type conflict during the assignment of references."
    background: I imported a WSDl provided by legacy into PI and created service interfaces and then trying to generate a proxy class while i get this error.
    Thanks.

    Hi Shyamsundar,
    I will explain a problem that I usually see in some developments:
    XSD originally:                                  XSD transformed:
    Root                                                     -> Root
    Tag 1 type int                                    -> Tag 1 type int
    Tag2 type string                               -> Tag2 type string
    Tag3 type  any                                  - Tag3 type  string
    Normally the tag3 should have a XML inside. Then the ABAPers have to construct the tag3 with  a CDATA structure (CDATA is used to put in an XML tag more XML tags inside like a text and no to be interpreted).
    Later in SAP PI you can extract the cdata with an XSL, you can find some examples in the SCN.
    I don’t like to convert the whole XML in only one string tag, because this makes difficult the develop for the ABAPers, although the work inside the PI is very easy because with an XSL you can extract the whole message easily. (You can find some examples in the SCN)
    Regards.

  • Error while generating PDF

    Hello Guru's,
    I have done the ADS configuration setup and checked all configuration settings.It seems everything is working fine but when i select the option  "Print Verison" ( I have executed a query using the query  designer) i am getting above error.
    FYI: Its a BI 700 system and we are at Suport pack10 level (both ABAP+Java). By the way i should let you know that it is a copy of Production.
    Here is the log:
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExport1
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExport#
    Any thoughts as to what the messages above might be pointing me to?I should appreciate your help.
    Thanks,
    Ravi.

    Hello Dezso,
    I have executed the test report FP_TEST_00 and i got a form containing several lines on two pages.I have checked all the configuration checks and got the correct results as mentioned in the ADS document. But when i try to print a query using the query analyzer,i am getting that PDF error. I have no issues with my other BI 700 system.
    Ravi.

  • Error while generating PDF - in Bex Web

    Hi Experts,
    I am currently having the issue that I receive the error "Error while generating PDF" when using the "Print Version" functionality. This problem only occurrs for the Bex Web Query. I know that the ADS service is configured correctly- The webservice test is successful and other applications (Guided Procedures, MSS) also use it successfully.
    Please see below the excerpt from the default trace:
    A message was generated:
    ERROR
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
    Message: 28
    Stack trace: java.lang.ArrayIndexOutOfBoundsException: 28
    at com.sap.ip.bi.export.xfa.impl.SizeCalculator.getColumnSizes(SizeCalculator.java:178)
    at com.sap.ip.bi.export.impl.ExportController.setSizes(ExportController.java:220)
    at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:611)
    at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:408)
    at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:336)
    at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:453)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:105)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:252)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:3809)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:3867)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:3510)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3470)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2489)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:892)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:813)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:456)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    If you have any idea or clue it would be greatly appreciated.
    Thanks in advance for every support,
    Jan

    Hi Jan,
    Most possible causes for encountering this issue are:
    Possible cause:
    - The ADS is installed on a plattform, that is currently not supported by SAP for ADS. Please check the avaliablity at: Product Availability Matrix
    - Mixing of different Netweaver releases (NW04 and NW04s) -> This is unfortunatelly not possibble the J2EE engine release has to match with the ABAP stack release in order connect them properly.
    - The ADS SP level does not match the J2EE engine SP level. -> Please update the software components to have the same support package level.
    Hope this helps!!
    Regards,
    Arafat

  • InfoSet Query: Syntax Error while generating the program.

    Dear All,
    I have a Query in CRM system which contains an Infoset based on LDB.
    The InfoSet Query throws up a Syntax error while generating the program.
    So, we are not able to change the Infoset using the Infoset Query through SQ01.
    The error is as follows:-
    Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
    Error in the ABAP Application Program
    The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
    in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
    line 28:
    ""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
    "ernal tables, strings, references, or structures as components. -"
    Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
    Awaiting your reply as soon as possible.
    Thanks and Regards,
    Pankaj.

    There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
    I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

  • Problems while generating the proxy definition

    Hi Experts,
       I am facing the error " Problems while generating the Proxy Definition! ", when creating the proxy definition, for a specific URL.
    The URL to call the webservice is similar to "http://www3.XYZ.com/_vti_bin/newswebservice.asmx?WSDL" and is returning the appropriate XML code. Moreover accessing the webservice through browser, returns the expected response, too.
    From the NWDS side, where we are creating the proxy, again, everything is fine, because we have already created two proxy definitions, in similar fashion, but for different WSDL links.
    The only difference we are encountering is like, earlier the links were of type "www.abc.com/..." while the new URL is of type "www3.xyz.com/..." type. I hope this load balancing technique has hardly to do anything with it.
    Any pointers for possible reasons and solutions will be of much help.
    Regards,
    Akhil Mishra

    If you are consuming a web service in NWDS look below document and check if you are not missing any step:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0cf9e42-ccb0-2c10-d0a4-f5aa8a79e19a

Maybe you are looking for

  • IPod partially syncs & I get "Disk cannot be read from or written to"mssg.

    Here's my initial problem:I think I Blew It. Tried to move iTunes from OS (C:) to DATA (D:). First I now realize that I should have come here first. But I didn't. I basically copied all of my iTune files into DATA (D:) and deleted them from OS (C:).

  • Does this mean i have a Problem? Permissions won't verify/Disk won;t repair? Do I need to reformat my entire system?

    ## # User Database # Note that this file is consulted directly only when the system is running # in single-user mode.  At other times this information is provided by # Open Directory. # This file will not be consulted for authentication unless the BS

  • Sales Table reqd

    Hi experts, My user need following data for sales register: Invoice date Invoice no. Customer code Customer Name Invoice qty Unit of measurement F.O.B. amount Freight recovered VAT Tax code Octroi Other deductions Total amount GL code Business Area C

  • Camera Orientation in Air for android

    Hello, i look for a way to setting the camera orientation. If i get the camera , and attach it to a video, the camera is always on landscape orientation. If i try to rotate the video to have a pseudo portrait orientation, nothing appear on the video.

  • Captivate 4 Templates

    I'm creating a Project Template in Captivate 4 but my preferences don't save. For example I set my text captions to Dislplay for Rest of Slide and No transition. When I create a project from Template those settings don't apply. Does anyone else have