Error while importing datasource from Dev. to Qlty
Hi guys,
I have transported a data source to quality from development system. while importing the same in quality it states error below.
WSPK901533 imported to WFP & it ended with error(RC=8). Please check.
Source system ZSTGLDV110 does not exist
No rule exists
Source RSDS GECPC_GFO_COD_GPR ZSTGLDV110 does not exist
Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L
Please let me know some once has any idea..
Its too urgent.
THanks in advance
Peter
Hi,
First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
thanks.
Similar Messages
-
Error while importing request from DEV to PROD
Dear Experts,
i am having the problems with request no.. There are two transport request nos and these have to be transported
from DEV to PROD. I relesed these two but while importing into PROD showing everthing completed successfully
with one error and error is Generation or programs and screens for both transport requests .
I am just enable to understand what this message is for ..
Please someone help me out in this....
with regards.
Praveen.
Moderator message: please search for available information/documentation before asking, read the detailed transport logs, correct the errors, try again.
Edited by: Thomas Zloch on Dec 13, 2010 6:05 PMHi,
First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
thanks. -
Error while creating datasource from table MBEWH
Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.Hi Zakir,
This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and create one datasource...
so, you need to check that related table also.. for that MBEWH table..
ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay -
Error while creating datasource from view ZBSIS_VIEW
Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource. -
Error,while importing METADATA from production to development
Folks,
I am getting the following error while importing the metadata. I have exported from production server and want to do some modification to the existing mappings. Can some body help me to resolve this?
Here is the error.
Import started at 10/07/2004 11:12:19 AM
* Import for OWB Release: 9.0.2.56.0 Version: 9.0.2.0.0
* User: owb_rep Connect String: (DESCRIPTION=(ADDRESS=(HOST=vectrenabp)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SID=SDWSTEST)))
* Data File: C:\oracle\OWBHome\owb\bin\win32\SDWSDEV-MAPPINGS-20041007_0916.mdl
* Log File: c:\oracle\OWBHome\owb\bin\win32\Log.log Log Message Level: ALL
* Physical Names: Y Mode: CREATE Character Set: WE8MSWIN1252
* Ignore Universal Identifier: N Commit At End: Y
Informational at line 15: MDL1205: PROJECT with Unique Object ID (UOID) <85247BBFEA1B44C6B10CDB3B70155A63> already exists, so PROJECT with physical name <SDWSDEV> and logical name <SDWSDEV> not imported.
Informational at line 24: MDL1205: DATAWAREHOUSE with Unique Object ID (UOID) <268F5A9F43364309A8C0D01374C4A867> already exists, so DATAWAREHOUSE with physical name <DWH_TARGET> and logical name <DWH_TARGET> not imported.
Error at line 141: MDL1247: Error occurred importing mapping <DWH_ZIP_CODE_DMGRPHCS_DIM_MAP/DWH_ZIP_CODE_DMGRPHCS_DIM_MAP> (at line 141).
Detailed Error Message:
API2014: Internal Error: Error in createStage:I have selected the option
Add new metadata and replace existing objetcs. But it is not importing. Also I tried other options like
1. deleting the existing mapping and tried.
2. Putting the mapping in recycle bin and try.
3. Take it from recycle bin.Even during taking it from recycle it is giving me the following error .
Error occurred importing mapping
<DWH_CMMDTY_INVC_FACT_MAP/DWH_CMMDTY_INVC_FACT_MAP>
(at line 141).
Detailed Error Message:
API2014: Internal Error: Error in createStage:
In above all cases it is giving me the error.
Could you please help? -
Date parse error while importing users from OIM to OIA (SRM 5.0.3)
Hi All,
Env Details:
OIA (SRM 5.0.3), Weblogic and Oracle 10g DB
We have integrated OIM to OIA with extended attributes mapping by modifying iam-context.xml file to load users. Its done successfully. But when we map "Date" related attribute, its giving "Date Parsing error" and its not loading the users.
We have tried loading users using flatFile mechanism, its also giving same result.
Please suggest me. Thanks in Advance !!!
Regards,
Ravi G.Hi,
Its a problem with OOB's OIMIAMSolution.class file, which is called while importing users from OIM. It used DateParse () conversion method only for all attributes which OIA attributes' name is ends with "Date". It defined, the conversion of date from (yyyy-MM-dd). So its expecting the input value should be in defined format(yyyy-MM-dd), if not, it gives a parse error.
We found work around for this as follows,
We have used other related OIA attribute which name ends other than "Date" string.
Thanks,
Ravi G. -
Error while importing data from shape file in mapBuilder.
Hi Dears,
I get the following error while importing shape file from inside mapBuilder
Feb 03, 2015 2:01:52 PM oracle.mapviewer.builder.wizard.shapefile.ImportShapefileThread importFile
WARNING: java.sql.BatchUpdateException: Internal Error: Overflow Exception trying to bind NaN
Record #51 not converted.
Feb 03, 2015 2:01:52 PM oracle.mapviewer.builder.wizard.shapefile.ImportShapefileThread importFile
SEVERE: Exception while importing shapefile [D:\GIS_Data\OpenStreetMap\pakistan-latest\waterways]:
null
any clue, solution. please.
Regards.I would take a look at the attribute data associated with each object in your shape file. Make sure that everything has a value, and that nothing is NULL.
ID VAR1
1 abc
efg <= this record will cause Mapbuilder to error when importing
2 <= this record will cause Mapbuilder to error when importing
3 hij -
Error while importing data from XML file to a Oracle database
I am getting the following error while importing data
*** atg.xml.XMLFileException: No XML files were found for "/Dynamusic/config/dynamusic/songs-data.xml".
The files must be located under the name "/Dynamusic/config/dyna
*** java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:120)
at atg.adapter.gsa.xml.TemplateParser.importFiles(TemplateParser.java:6675)
at atg.adapter.gsa.xml.TemplateParser.runParser(TemplateParser.java:5795)
at atg.adapter.gsa.xml.TemplateParser.main(TemplateParser.java:5241)
I have placed the FakeXADataSource and JTDataSource properties files as required. In fact I have been able to import data in all machines. Just this one machine is giving problems. I have also checked out the access rights. Can someone help me please?Confirm that you have access to D:\MyApp\ATG\ATG10.0.3 and existence of Dynamusic/config/dynamusic/songs-data.xm
-
Error while Transport objects from DEv to QA-File transport
Hai Experts!
While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
Regard's
Preethi.Hai!
Issue is solved.
I try to export the Individual object -->Message mapping.
While exporting i unchecked the Option With software component version Defenition.
Now it is success. Thanks all replies.
Regard's
Preethi. -
Error while importing data from 8i to 9i
Hello !
I have installed 9i and now want to import data from previous database 8i which contains GB's of data.
I have exported through transporatble tablespaces but while importing to 9i i receive the following error of national character set .
Import done in WE8MSWIN1252 character set and WE8ISO8859P1 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
export server uses US7ASCII NCHAR character set (possible ncharset conversion)
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
IMP-00000: Import terminated unsuccessfully
Can any one fix this problem
Regards
ShimakIf you're moving data from 10G to 9i, using EXP/IMP, I would try using the 9i EXP to create the dumpfile with data from the 10G database, and then using the 9i IMP to import that dumpfile into the 9i database.
Sounds like you have been using the 10G EXP and IMP in both cases. -
Folks,
I am in the process of doing an OWB upgrade from
9.0.3 to 9.2.0.2.8.
I did the design repository install (for 9.2.0.2.8),
then runtime repository schema install and created
runtime access user .
Then I did an MDL export using the OWB client of 9.0.3 and now I am doing an import using the OWB 9.2.0.2.8 client into the 9.2.0.2.8 design repository.
Getting following errors
Import started at 02/04/2004 3:49:45 PM
* Import for OWB Release: 9.2.0.2.8 Version: 9.2.0.2.0
* User: owbrepuser Connect String: (DESCRIPTION=(ADDRESS=(HOST=edht033)(PROTOCOL=tcp)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=gdwowb)))
* Definition File: null
* Data File: C:\Oracle\Oracle9iDevSuite\owb\bin\admin\OWBDEV3_GDW_DATA_MART_V3.0-20040204_0937_92.mdl
* Log File: C:\Oracle\OracleOWB9_2\owb\bin\admin\Log.log Log Message Level: ALL
* Physical Names: Y Mode: CREATE Character Set: WE8MSWIN1252
* Ignore Universal Identifier: N Commit At End: Y
Warning: MDL1291: Import requires more than the maximum number of locks allowed <300> for import. Automatically switched import to single user mode to allow import to proceed.
Warning at line 75: MDL1198: In CREATE mode, configurable parameter name 8i.ORACLE8.1.DEPLOYMENTDBTYPE does not exist in target repository for configurable object DATAWAREHOUSE <LOAD_TO_GDW/LOAD_TO_GDW>.
Warning at line 8,409: MDL1198: In CREATE mode, configurable parameter name 8i.ORACLE8.1.DEPLOYMENTDBTYPE does not exist in target repository for configurable object DATAWAREHOUSE <SOURCE_TO_LOAD/SOURCE_TO_LOAD>.
Warning at line 496,727: MDL1240: Cannot set property with key <8i.MAPPINGS.SQLLOADERSTEP.DATAFILE.IDENTIFICATION.DATAFILENAME> to value </env102/dw01/owbadmin/txt/dev/LOAD_CONTROL.TXT>. See below for details:
API0407: The minimum length of this field is 0 and its maximum length is 30. You have 0 characters.[]
Warning at line 496,731: MDL1240: Cannot set property with key <8i.MAPPINGS.SQLLOADERSTEP.DATAFILE.IDENTIFICATION.BADFILENAME> to value </env102/dw01/owbadmin/ctl/dev/bad/LOAD_CONTROL.bad>. See below for details:
API0407: The minimum length of this field is 0 and its maximum length is 30. You have 0 characters.[]
Warning at line 496,735: MDL1240: Cannot set property with key <8i.MAPPINGS.SQLLOADERSTEP.DATAFILE.IDENTIFICATION.DISCARDFILENAME> to value </env102/dw01/owbadmin/ctl/dev/dicard/LOAD_CONTROL.dis>. See below for details:
API0407: The minimum length of this field is 0 and its maximum length is 30. You have 0 characters.[]
Warning at line 496,739: MDL1240: Cannot set property with key <8i.MAPPINGS.SQLLOADERSTEP.DATAFILE.IDENTIFICATION.DISCARDMAX> to value <0>. See below for details:
API0407: The minimum length of this field is 0 and its maximum length is 30. You have 0 characters.[]
Warning: MDL1196: Mapping <L3_CONTROL_MAP> imported, but it is not identical to mapping defined in import data file. See warning messages above for more details.
Total number of warning(s) are 8
Error at line 495,254: MDL1247: Error occurred importing mapping <L3_CONTROL_MAP/L2_CONTROL_MAP> (at line 495,254).
Detailed Error Message:
MDL1249: Error occurred saving mapping physical configuration information.
API0407: The minimum length of this field is 0 and its maximum length is 30. You have 0 characters.[]
*********************************************Shauna,
Quick question.
Can I proceed with the upgrade, now from 9.2.0.2.8 to 9.2.0.3 or should I wait for this error to be fixed first.
This error I got will be doing the upgrade from 9.0.3 to 9.2.0.2.8.
Thanks for your help.
Ashish -
Error while importing tables from oracle database
Hi
I am getting the following error when i am trying to import table from oracle database.
my operating system is windows and my database is oracle.
[nQSError: 16001]ODBC error state: IM004 code:0 message:
[Microsoft][ODBC Driver Manager] Driver`s SQLAllocHandle on SQL_HANDLE_ENV failed.
please help me in resolving this issue.
Thanks and Regards,
RajHi Madan,
I have done migration Discoverer Admin EUL Layer into OBIEE repository using below methodology.
Navigate to the <installdrive>\OracleBI\server\Bin directory. There are two important files in this directory: the migration assistant executable file named MigrateEUL.exe and a properties configuration file named MigrationConfig.properties.
Could you please help me how to migrate discoverer plus workbooks and worksheets into OBIEE Answers?
go through below link, It will show navigation steps for migrating of EUL from Discoverer to OBIEE.But i need migration of workbooks and worksheets from Discoverer into OBIEE Answers.
http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/discomigration/migrate_disco_biee.htm
This is very great full help to me …
Advance thanks for your suggestions.
Regards
Duraga Prasad. -
OBIEE Error while importing table from database
Hi
I am getting the following error when i am trying to import table from database.
[nQSError: 16001]ODBC error state: IM004 code:0 message:
[Microsoft][ODBC Driver Manager] Driver`s SQLAllocHandle on SQL_HANDLE_ENV failed.
Any idea y such error.
Thanks and Regards,
AndyLooks like an error in the ODBC driver, not OBIEE as such.
Have you tried googling it?
Can you post details about your OS and DB. -
Error while importing data from excel to forms
Hi,
I am working on Oracle forms 10g, and I'm supposed to import data from excel sheet to forms.
While the user enters the data,sometimes after entering a particular word he/she hits the alt+enter button.
As a result the data appears in two lines in a single row
So,when I try to import the data it's not importing the data in a right manner.
S0,I want to replace this linefeed and carry with five spaces.
Eg:The user instead of entering Geekpedia enters Geek
pedia
in the excel sheet.
Now when I import this in the forms I want it to be imported as Geek Pedia.(5 spaces between Geek and pedia).Maybe you can consider save excel as .csv files and then you can load them as flatfiles to external table in OWB.
-
Error while importing budgets from a SOB
Hi All,
I am trying to import budgets from one SOB to another. I am getting a error when i import in the new SOB. The error is Invalid fiscal year for certain number of rows. Status is : F
Can any 1 please help me what is this error about.
Regards,
RiteshConfirm that you have access to D:\MyApp\ATG\ATG10.0.3 and existence of Dynamusic/config/dynamusic/songs-data.xm
Maybe you are looking for
-
I just subscribed to ITunes Match. I was able to connect my phone and Ipad but I cant't connect my wife's phone. She has a different Apple ID.
-
Hello all, I have a new GTX 970 G4 Gaming Golden Edition and everything was running fine until I wanted to watch a Bluray Movie and had no digital output from the card. Analog VGA through the included adapter was fine at 1080P on this monitor b
-
Suspend fails 50% of time on Linux 3.1.1, works on 3.0.4
Hi folks, I upgraded yesterday from 3.0.4 to 3.1.1 and noticed that suspend wasn't working anymore as it used to. I began to investigate the problem and at it's core I believe that the cause is a buggy BIOS - the lid states are not correctly reported
-
What about the contents of QUAL.dmp
hi, i'm using the version 7.6.2.10 anyone can explain me what is this contents extracted from QUAL.dmp? error at index : 4 1 DUMMY epos: 0 elen_var: 0 4 4 2 DUMMY epos: 9 elen_var: 4 0 0 3 V
-
Hi, I am new to Abap. Can any one tell me what is the maximum laength of a table can be....In help.sap. i found that it is 18 characters... but when i am trying it here it is allowing to give only 16 letters... And the other error i am getting is th