Error while Importing Vendor Master records

I get the following error when importing vendor Master records into the MDM repositorry
Cannot import qualifiers because the qualified lookup field is not mapped.
I noticed that the file I'm importing contains 1000 vendors. However the qualified lookup table "PHONE" for the vendors contain only 388 records.
After I imported the records I found that there was only 389 records in the repository.
I'm using standard map provided by SAP.
I ran the import again but this time I unmapped all fields for the qualified update.
Now the Import Manager uploaded the remaining 613 records.
I would like to know whether how I can load 1000 records in one load rather than having to go through the file twice.
This is important since I want to use the import manager server for my loads.
Thanks
manoj

Hi Manoj,
Try the following options.
1. In the Import Manager, Select Configuration->Options
set <b>"Merge qualified links using matching qualifiers value to Off"</b>
2. In the Map Fields/Values tab in Import manager, select the qualified field in which you are trying to import, right clik on the field->select Set Qualified Update -> Update -> Select All available qualifiers into Matching qualifiers->
New Links- Create
Existing Links -> Update (All Mapped Qualifiers).
Hope this should solve your problem.
Thanks and Regards
Subbu.

Similar Messages

Error while importing the user Records through SCC7

Hi Basis Gurus,
We are doing the post DB Refresh Activities for a Sandbox .
Refresh is done from D21 to S21.
We are stuckup with an error while importing the user Records(scc7).
The exported user records request from D21 is dumped in the trans directory of S38 and imported in to S21 using TP commands at O/S level. The import is done successfully( RC 4 with warnings).
But now when we run SCC7 (post import activities) in the background the process is getting cancelled right in the begining.
Error Occured in SCC3 log
Table logging disabled in program RSCLXCOP by user SAP*"
R/3 Version is 4.6C OS:AIX5.3
Your suggestions will be highly appreciated.
Regards,
Sitaram

Hey Sitaram,
I looks like you have incorrect parameters of client copy in the S21 system.
You can change the parameters in S21 system,
by executing report RSCLXCOP (via transaction SE38 or SA38) in S21.
Search parameters that related to table logging/sap*
good luck!

Error while importing Item Master data through DTW

Hello Expert,
I trying to import item master data through DTW but it gives an error while importing as shown in attach file..
Please help me...
I am using SAP 9.0 Pl 6
Regards,
Sandy

Hi Sandy,
Kindly follow the check list
1. Right Click DTW and run it as Administrator.
2. Is your DTW version is same as SAP B1.
3. Uninstall and re-install DTW.
4. If you are using 64-bit DTW, try to use 32-bit one.
5. Check the Template, is it of the same DTW version.
6. Remove all the unnecessary columns.
7. Last try different Template extension.. (e.g: CSV (Comma delimited), or Text (Tab delimited))
Hope you find this helpful......
Regards,
Syed Adnan

Error while creating vendor master (xk01)

i am trying to create a vendor master in t.code
xk01, using standard objects, ie company code
R300, purchasing org- R300, account group---LIEF.
In address screen, i entered country as US,
system is giving an error
*Communication error with the external tax system (VERTEX_MS0018)
Message no. TAX_TXJCD864*
pls give me a solution as soon as possible.
rewards assured.

Dear Pavan,
Check the input tax settings have been done in your tax procedure with related to the country US.
I hope it will help you
Regards,
Murali.

Error while transferring Vendor master from R/3 to SRM

Hi,
I have done the following.
R/3 .
1. Vendor creation in Xk03 for the organisation
SRM.
1.Created a vendor group in PPOCV_BBP
Entered the following in BBPGETVD.
1. Logical system
2.Vendor
3.Purchase organisation.
4. tice mark in address comparion,
5. Organisation ID: 50000407 for the Vendor group created in PPOCV_BBP.
6. only Transfer R/3 Number
7. Executed ..
Error is I am getting the following error. while using BBPGETVD .
"None of the purchasing organisation in org Structure"
Please give your solution
Regards
G.Ganesh Kumar

Hello Ganesh,
I did not talk about tab Attributs.
In PPOSA_BBP, one of your Organizational Unit must have in its tab Functions value 'Purch. Organization' set with correspondence in R/3 values (number and logical system).
Regards.
Laurent.

Error while replicating vendor master data from R3 to SRM

Hi,
I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
Organizational unit 50000004 does not exist; check entries
Message no. BBP_BUPA034
I have gone through the other posts with similar issues but haven't been able to find a solution.
Any ideas?
Thank you.

hi sahlini
did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
BR
\MUTHU

Error while importing Item MAster Data using DTW

Hi,
when we are importing item master data using items template
it is giving error.
Error:":connected value 1 was not found "
can any one send the oitems template that is working fine wthout any error.
Thanks,
Neetu

You cannot import data prepration templates>>Testcase1_Test Data for Import function>Oitems directly.
You will have to do certain prerequisites like setting CommissionGroup, CommissionPercent, CommissionSum,CustomsGroupCode etc., in SAP before importing Items.
So I would like you to try out with minimum fields in the template and import. After understanding, you can import the required fields.
I suggest you to use the template from "C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\oItems"

Run time error while create Vendor master via MK01

Dear Experts,
when i try to create vendor master by MK01.....system throws run time error as below:
"The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CVI_MAP_TITLE=================CP' has to be
terminated."
My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
Regards
Vetrivelan

Hii,
please search sdn before posting the threads.
check these links, it may help u............
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
CX_BADI_NOT_IMPLEMENTED
thanks.

Error while creating vendor master data via ALE

Dear All
I am trying to create vendor master data via ALE.
I am using message type CREMAS.
I get following error message in inbound system
No batch input data for screen SAPMF02K 0610
Message no. 00344
If i try to manually create vendor , there is no error. This particular screen belong to withholding tax, however all customizing settings for withholding tax are okay.
please help.
Thanks
Sanjeev

Try SAP Note # 96312 if that helps.

CIF Error while transferring vendor

We are facing CIF error while transferring vendor master to APO.
The issue is in e-mail address of the vendor master.
One way is to correct the e-mail addresses - one per line without semicolon at the end.
But the issue list is very huge to get it corrected.
Is there any other way by which we can exculde the e-mail addresses or its validation?
Thanks and regards,
Sushant

Hi Senthil,
The objective was to avoid CIF error due to incorrect address setup. This required us bypass it before data transfer. We could fix this using enhancement in ECC.
Apreciate your kind reply, though. Thanks a lot.
Warm regards,
Sushant

ERROR : Output - No details for medium PRN im vendor master record

While trying to create PO after applying sourcing to a shopping cart the following error message apears in our system currently
Output: No details for medium PRN im vendor master record (Document Number 1000000295 , Item 1)
Could anybody depict the solution pl ?

Hi
Which SRM version are you using ?
Please go through this ->
In PPOMABBP, your purch org must be defined under (or at the same level as) a company. This company org id (defined in function tab) will be used to read address and use it as "contact" addresse._
PO output
Reg Output medium in Purchase order.
Also, try adding a default printer in the organizational plan (PPOMABBP) or to add a printer in the BP address._
You can look at transaction bbp_po_action_def to understand how it is done for setting output medium.
+Look for BADI "BBPSEND_MEDIUM_MODE ".+_
Related links ->
Re: How to define a new "send medium" for a vendor?
SRM PO's to be printed out with the PO
To set Output type,check the foll path:
SPRO->supplier relationship management-> SRM Server->Cross application basic setting->set output action and output format
See the foll link for more details:
http://help.sap.com/saphelp_srm50/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/frameset.htm
Related notes:
Note 1028388 - User settings for output medium is not saved.
Note 885593 - SRM 5.0 SP02: Incorrect output medium and change impossible
Do let me know.
Regards
- Atul

Replication Error with Vendor Master Records

Hello,
We are trying to replicate vendor master records from R/3 to SRM via BBPGETVD. When we go to SLG1, there is an error stating Business Partner XXXX: Invalid Value 0003 for field Authorization Group.
Currently, the AP dept. maintains the field Authorization Group in the Vendor Master Record 'Control' screen with a fixed value of 0003 (LFA1-BEGRU). When the replication occurs, SRM complains that this field value does not exist in a SRM customizing table or is a fixed value.
Do we need to implement the BBP_TRANSDATA_PREP BAdI to pass this value as a fixed value to replicate vendors?
-regards
Shaz Khan

I'm planning to implement bbp_transdata_prep. Wondering if either one of you can help. I've also opened another thread with my specific questions.
Replication Error with Vendor Master Records

Error in DTW while importing Employee master

Hi,
While importing employee master data the following error is displaying
The field is too small to accept the dataoemployeesinfo. can anybody help wht this error stats.
Regards,
C.Rajesh
Edited by: Philip Eller on May 26, 2008 8:39 AM

Hi,
it means that the data you input into column or field dataoemployeesinfo are exceeding the maximum amount of characters allowed in the column. To know the maximum amount of character of the column , you could activate system information while you are in the emplyoee master data screen, you could see the field name and the field maximum size.
Another way is to use SDK help file.
Rgds,

Error importing vendor master data from ERP

Hi experts,
currently we are trying to import vendor master data from ERP to SAP Sourcing 9.
We exported the data in an XML file by using the transaction BBP_ES_MAST_DOWNLOAD.
We already imported all the dependencies like vendor account group, purchase org, regions etc. successfully.
However, every time we are trying to import the vendor data we receive the same result:
Data Import:
Trace.txt:
Do you have any hints why this happens?
Thanks in advance and best regards,
Johannes

Hello Johannes,
This looks to come from a custom script in your system.
Go to Setup > Script Definition and check all scripts defined on class "Supplier" (starting with those on context: Import Lifecycle Event).
Search for a script that starts with "throw doc.createApplicationException(test..."
Regards,
Bogdan

Error while creating vendor contact person using vmd_ei_api

Hi,
while craeting vendor contact person using maintain_bapi of vmd_ei_api class iam getting error like 'Specify address number or address handle'.
code :
CALL FUNCTION 'BAPI_PARTNEREMPLOYEE_GETINTNUM'
EXPORTING
quantity = 1
IMPORTING
* RETURN =
contactid = lv_contactid
* QUANTITY =
* TABLES
* CONTACT =
ls_contacts1-task = 'I'.
ls_contacts1-data_key-parnr = lv_contactid."ls_knvk-parnr.
ls_contacts1-data-abtnr = '0002'."ls_knvk-abtnr.
ls_contacts1-data-pafkt = '02'."ls_knvk-pafkt.
ls_contacts1-data-parau = 'BNotes'."ls_knvk-parau.
ls_contacts1-datax-abtnr = 'X'.
ls_contacts1-datax-pafkt = 'X'.
ls_contacts1-datax-parau = 'X'.
* Inserting Phone ,Fax and email.
ls_phone-contact-task = 'I'. "Phone
ls_phone-contact-data-telephone = '89655696569'.
ls_phone-contact-data-extension = '778548'.
ls_phone-contact-datax-telephone = 'X'.
ls_phone-contact-datax-extension = 'X'.
APPEND ls_phone TO lt_phone.
ls_phone-contact-task = 'I'.
ls_phone-contact-data-r_3_user = 'X'.
ls_phone-contact-data-telephone = '89845589369'.
ls_phone-contact-data-extension = '858588'.
ls_phone-contact-datax-updateflag = 'X'.
ls_phone-contact-datax-telephone = 'X'.
ls_phone-contact-datax-extension = 'X'.
ls_phone-contact-datax-r_3_user = 'X'.
APPEND ls_phone TO lt_phone.
ls_fax-contact-task = 'I'.
ls_fax-contact-data-fax = '8896589'.
ls_fax-contact-data-extension ='44521'.
ls_fax-contact-datax-fax = 'X'.
ls_fax-contact-datax-extension ='X'.
APPEND ls_fax TO lt_fax.
ls_contacts1-address_type_3-communication-phone-current_state = ' '.
ls_contacts1-address_type_3-communication-phone-phone = lt_phone.
ls_contacts1-address_type_3-communication-fax-current_state = ' '.
ls_contacts1-address_type_3-communication-fax-fax = lt_fax.
ls_contacts1-address_type_3-communication-fax-current_state = ' '.
ls_contacts1-address_type_3-communication-fax-fax = lt_fax.
ls_contacts1-address_type_3-task = 'I'.
ls_contacts1-address_type_3-POSTAL-data-FIRSTNAME = 'Roger'.
ls_contacts1-address_type_3-postal-data-lastname = 'Fedrer'.
ls_contacts1-address_type_3-POSTAL-datax-FIRSTNAME = 'X'.
ls_contacts1-address_type_3-postal-datax-lastname = 'X'.
APPEND ls_contacts1 TO lt_contacts1.
ls_vendor1-header-object_instance = p_lifnr.
ls_vendor1-header-object_task = 'M'.
ls_vendor1-central_data-contact-contacts = lt_contacts1.
ls_vendor1-central_data-contact-current_state = 'X'.
ls_vendor1-central_data-central-data-adrnr = ls_adrnr.
ls_vendor1-central_data-central-datax-adrnr = 'X' .
APPEND ls_vendor1 TO lt_vendor1.
gs_vmds_extern-vendors = lt_vendor1.
DATA:gs_succ_messages TYPE cvis_message,
gs_vmds_error TYPE vmds_ei_main,
gs_err_messages TYPE cvis_message,
gs_vmds_succ TYPE vmds_ei_main.
* Call the Method for creation of Vendor.
CALL METHOD vmd_ei_api=>maintain_bapi
EXPORTING
is_master_data = gs_vmds_extern
IMPORTING
es_master_data_correct = gs_vmds_succ
es_message_correct = gs_succ_messages
es_master_data_defective = gs_vmds_error
es_message_defective = gs_err_messages.
if sy-subrc = 0.
commit work.
Please suggest which fields else i have to pass??

Hi Abhijeet,
here i am showing you some scn help to use maintain bapi of vmd_ei_api class, i think you are missing some data to be uploaded along with there are methods in lsmw, bdc too for this, please go through below links carefully , i hope you will able to solve your problem.
Vendor Master Upload Program - ABAP Development - SCN Wiki
unable to vendor master record update using class vmd_ei_api
Creation of Vendor - VMD_EI_API

Error while Importing Vendor Master records

Similar Messages

Maybe you are looking for