Error while Installation of EP 7.0

Hi Experts ,
I am facing an error while i run the file sapinst.exe . This error comes after completing the following steps : SAP netweaver 7.0 support release 3.0 -> Central System->Custom->Continue with Old option .
After i select the last option i mentioned , and move ahead , i get the error saying : Unable to add privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to my name .
How do i get rid of this problem .

Hi Mayank,
You will have to assign the user to the following settings using "Local Security Settings" Editor. You should find this under the Administrative Tools within Control Panel.
Open the Local Security Settings, browse to Local Policies -> User Rights Assignment and add your user to the following settings
1. Replace a process level token
2. Adjust memory quotas for a process
3. Act as part of the operating system.
Good Luck!
GLM

Similar Messages

  • Error while installation of Outlook Integration Add On

    Hi Experts,
    Problem encountered upon installation of outlook add-on
    The message box shows "The Procedure point ??OCBFDbDef@@QAE@....... could not be located in dynamic link library BFFramework.dll".
    I'm watching this thread . I cannot open the link for the proposed solution to my problem.
    [Error while installation of Outlook Integration Add On]
    Please provide updated link
    Regards,
    Sandra
    Edited by: Sandra Callanta on Sep 15, 2009 10:55 AM
    Edited by: Sandra Callanta on Sep 15, 2009 10:56 AM

    Hi Sandra,
    You may check SAP Note Number: 953357 instead. The title for the note is: Troubleshooting Add-ons in Business One.
    Thanks,
    Gordon

  • Error while installation of Addon

    Friends,
    I get this error while installation of addon.
    An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
    My code works fine when executed directly from Visual Studio. But when i build the addon and try to install it, i get this error.
    The server is 64 Bit. is it making any difference?
    plz help.
    Laks.

    look at sdk forum, there is a lot of explanation for this.
    From visual studio you are using diferent connection string than in addon and for addon you must create separately instal file (not only compiled as exe from vs)
    In sdk samples is example for addon creating, look at that.
    Petr

  • Dtabase version error while installation

    Hi,
    I am installing BAM in 2003 server with oracle Database XE which have 10.2.0.1 version.
    But its giving me the below error while installation:
    Database version should be 9.2.0.7 or higher , 10.1.0.5 or highers, 10.2.0.2 or higher .
    Please suggest me on the same.
    Regards,
    Ana

    Hi,
    Thanks for the suggestion, now my issue has been resolved.
    I did the installation of DataBase and BAM again after deleting its all previous entries from Oracle home.
    It accept that version only and working fine.
    Regards,
    Ana

  • Facing Error while installation of netweaver 7.02 on win2k3

    Hi Guys,
    I m facing error during installation on my win2k3 server machine, please help on this , error and log is below.
    An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
    TRACE 
    2014-06-19 05:58:38.992 [iaxxclib.cpp:188]
    CLib::load()
    Opened sylib721.dll
    TRACE 
    2014-06-19 05:58:38.992
    exe dir is C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501
    TRACE 
    2014-06-19 05:58:39.480
    MessageLib initialized successfully.
    INFO  
    2014-06-19 05:58:39.492 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Documents and Settings\Administrator\Local Settings\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel_test_19_Jun_2014_05_58_39.
    INFO  
    2014-06-19 05:58:39.504 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Documents and Settings\Administrator\Local Settings\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel_test_19_Jun_2014_05_58_39.
    TRACE 
    2014-06-19 05:58:39.504 [syxxclogbook.cpp:209]
    PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
    lib=syslib module=syslib
    Initialized SAP kernel tracing to file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel
    INFO  
    2014-06-19 05:58:39.515 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Documents and Settings\Administrator\Local Settings\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel_test_19_Jun_2014_05_58_39.
    INFO  
    2014-06-19 05:58:39.515 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Documents and Settings\Administrator\Local Settings\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel_test_19_Jun_2014_05_58_39.
    TRACE 
    2014-06-19 05:58:39.527 [syxxclogbook.cpp:209]
    PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
    lib=syslib module=syslib
    Initialized SAP kernel tracing to file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel
    TRACE 
    2014-06-19 05:58:39.562 [iaxxclib.cpp:188]
    CLib::load()
    Opened C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501/iaguieng721.dll
    TRACE 
    2014-06-19 05:58:39.725 [iaxxgenimp.cpp:918]
    CGuiEngineImp::init()
    receiving and sending on port 21200
    TRACE 
    2014-06-19 05:58:39.865 [syxxccuren.cpp:31]
    CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/sapinst_exe.1176.1403175501/jre')
    lib=syslib module=syslib
    Environment variable SAPINST_JRE_HOME set to value 'C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/sapinst_exe.1176.1403175501/jre'.
    TRACE 
    2014-06-19 05:58:41.905
    exe dir is C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/sapinst_exe.1176.1403175501
    INFO  
    2014-06-19 05:58:42.55 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\x.
    INFO  
    2014-06-19 05:58:42.55 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\x.
    TRACE 
    2014-06-19 05:58:42.215 [iaxxclib.cpp:188]
    CLib::load()
    Opened C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501/iakdblib721.dll
    TRACE 
    2014-06-19 05:58:42.215
    SAPinst build information:
    abi version : 721
    make variant: 720_REL
    build  
    : 1128529
    compile time: Jan 20 2010 03:41:04
    TRACE 
    2014-06-19 05:58:43.337 [iaxxgenimp.cpp:469]
    CGuiEngineImp::showDialog()
    showing dlg diProductChoice
    TRACE 
    2014-06-19 05:58:43.337 [iaxxgenimp.cpp:488]
    CGuiEngineImp::showDialog()
    <dialog sid="diProductChoice">
    <title>Welcome to SAP Installation Master</title>
    <dialog/>
    TRACE 
    2014-06-19 05:59:00.582 [iaxxclogintimeout.cpp:102]
    CLoginTimeout::run()
    Login in progress
    TRACE 
    2014-06-19 05:59:00.902
    Connection request to guiengine backend by host 192.168.2.4
    TRACE 
    2014-06-19 05:59:01.042
    Protocol version is 3.1
    TRACE 
    2014-06-19 05:59:01.042
    Send connect information
    TRACE 
    2014-06-19 05:59:01.042
    client logged on
    TRACE 
    2014-06-19 05:59:01.142 [iaxxgenimp.cpp:1245]
    CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE 
    2014-06-19 05:59:34.651 [iaxxdlghnd.cpp:97]
    CDialogHandler::doHandleDoc()
    CDialogHandler: ACTION_NEXT requested
    TRACE 
    2014-06-19 05:59:34.651 [iaxxcdialogdoc.cpp:203]
    CDialogDocument::submit()
    <dialog sid="diProductChoice">
    <dialog/>
    INFO  
    2014-06-19 05:59:34.741 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\x.
    INFO  
    2014-06-19 05:59:34.741 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\x.
    TRACE 
    2014-06-19 05:59:35.502 [iaxxgenimp.cpp:469]
    CGuiEngineImp::showDialog()
    showing dlg diRestartOrCancel
    TRACE 
    2014-06-19 05:59:35.502 [iaxxgenimp.cpp:488]
    CGuiEngineImp::showDialog()
    <dialog sid="diRestartOrCancel">
    Dialog does not contain standard input handler, so the backend is not able to generate a log entry
    <dialog/>
    TRACE 
    2014-06-19 05:59:35.532 [iaxxgenimp.cpp:1245]
    CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE 
    2014-06-19 06:04:49.283
    current working directory is C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/
    INFO  
    2014-06-19 06:04:49.363 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\x.
    INFO  
    2014-06-19 06:04:49.363 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\x.
    TRACE 
    2014-06-19 06:04:49.403 [syxxcfile.cpp:168]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/dev_sap_kernel, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
    INFO  
    2014-06-19 06:04:49.403 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\dev_sap_kernel.
    TRACE 
    2014-06-19 06:04:49.403 [syxxcnode.cpp:441]
    CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL, ISyNode::CopyMoveMode_t 0x3)
    lib=syslib module=syslib
    Moved C:/Documents and Settings/Administrator/Local Settings/Temp/sapinst_exe.1176.1403175501/dev_sap_kernel to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/dev_sap_kernel
    TRACE 
    2014-06-19 06:04:49.423 [syxxclogbook.cpp:209]
    PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
    lib=syslib module=syslib
    Initialized SAP kernel tracing to file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\dev_sap_kernel
    TRACE 
    2014-06-19 06:04:52.167
    Running with toplevel file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//toplevel.xml
    TRACE 
    2014-06-19 06:04:52.418 [syxxcfile.cpp:130]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.2.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE 
    2014-06-19 06:04:52.418 [syxxcnode.cpp:441]
    CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.2.log, ISyNode::CopyMoveMode_t 0x3)
    lib=syslib module=syslib
    Moved C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.log to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.2.log
    TRACE 
    2014-06-19 06:04:52.458 [syxxcfile.cpp:130]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.2.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE 
    2014-06-19 06:04:52.458 [syxxcnode.cpp:441]
    CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.2.log, ISyNode::CopyMoveMode_t 0x3)
    lib=syslib module=syslib
    Moved C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.log to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.2.log
    TRACE 
    2014-06-19 06:04:52.888
    Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
    TRACE 
    2014-06-19 06:04:52.908
    Running with dialog file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//dialog.xml
    TRACE 
    2014-06-19 06:04:53.209
    Running with keydb file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//keydb.xml
    TRACE 
    2014-06-19 06:04:54.831 [syxxcfile.cpp:130]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE 
    2014-06-19 06:04:54.831 [synxcfile.cpp:516]
    CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    lib=syslib module=syslib
    Copying file C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml
    INFO  
    2014-06-19 06:04:56.433 [synxcfile.cpp:716]
    CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    lib=syslib module=syslib
    Copied file 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml'.
    TRACE 
    2014-06-19 06:05:00.229 [kdxxctaco.cpp:219]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE 
    2014-06-19 06:05:00.679 [syxxcfile.cpp:130]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE 
    2014-06-19 06:05:00.679 [synxcfile.cpp:516]
    CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    lib=syslib module=syslib
    Copying file C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml
    INFO  
    2014-06-19 06:05:00.729 [synxcfile.cpp:716]
    CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    lib=syslib module=syslib
    Copied file 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml'.
    TRACE 
    2014-06-19 06:05:00.739 [kdxxctaco.cpp:252]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    after creating out stream
    TRACE 
    2014-06-19 06:05:01.40 [kdxxctaco.cpp:286]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE 
    2014-06-19 06:05:06.698 [kdxxctaco.cpp:219]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE 
    2014-06-19 06:05:07.19 [kdxxctaco.cpp:252]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    after creating out stream
    TRACE 
    2014-06-19 06:05:07.259 [kdxxctaco.cpp:286]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE 
    2014-06-19 06:05:31.894
    SAPinst was started using commandline: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501\sapinst.exe
    TRACE 
    2014-06-19 06:05:31.894
    SAPinst properties are :
    GUISERVER_DIALOG_PORT=21212
    GUISERVER_HTTP_PORT=4239
    SAPINST_CONTROL_URL=control.xml
    SAPINST_DIALOG_PORT=21200
    SAPINST_DIALOG_URL=dialog.xml
    SAPINST_EXE=SAPINST_EXE
    SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,ClusterMgt,SystemIdentity
    SAPINST_KEYDB_URL=keydb.xml
    SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
    SAPINST_MESSAGE_URL=.
    SAPINST_PACKAGES_URL=packages.xml
    SAPINST_RESOURCE_URL=resourcepool.xml
    SAPINST_SAVE_INPUT=true
    SAPINST_SCAN_DEVICES=false
    SAPINST_SKIP_DIALOGS=false
    SAPINST_TOPLEVEL_URL=toplevel.xml
    SAPINST_USE_ADVANCED_JS_HANDLING=true
    SELFEXTRACTOR_EXECUTABLE_NAME=C:/Documents and Settings/Administrator/Desktop/AS_ABAP_7_02_SP6_32_bit_Trial_Part_1/NWASABAPTRIAL70206/SAP_NetWeaver_702e_Installation_Master/IM_WINDOWS_I386/sapinst.exe

    Dear Nitin,
    Please provide the below  log for error information.
    import_monitor.java.log, import_monitor.log
    Best Regards,
    Atul

  • Error while installation of jdev file of Windows 7 labtop

    Dears,
       kindly advise the reason to get error msg while installation of file jdev_suite_121200_win64.exe
    once I double click that file after downloading it will starts the universal installer after that it will prepare to install then give this error and stop installation
    the error msg is " ERRPR launch: No such file or Directory"

    Hi,
    This problem seems to come up quite often, I guess you are installing 10g version of SOA Suite.
    You did not mention, whether the installation failed or you are stuck at some step of installation.
    This kind of error has been discussed in detail with some solution in this thread
    SOA Installation Error - psapi.dll
    Hope this helps

  • Error while installation 9.2.4 on OEL -5 ..Urgent help required...

    Hi Friends,
    I am in the process of installation oracle 9i on OEL 5. I have sucessfully installed the software 9.2.4 but I am getting error while creating the database with dbca. I have installed all the libraries which were required for successful installation.
    While starting the dbca I am getting the following error. I have tried all the options which are available on google/ open forms. I also applied the patch p3006854_9204_LINUX.zip but still I am getting the error. I know I may be missing something. Any expert can help me out please ?
    [ oracle@datadayal bin ]$ ./dbca
    /home/oracle/jre/1.1.8/bin/../lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
    Unable to initialize threads: cannot find class java/lang/Thread
    Could not create Java VM
    [oracle@datadayal bin]$
    Could not create Java VM
    [ oracle@datadayal bin ]$ export LD_ASSUME_KERNEL=2.4.19
    [ oracle@datadayal bin ]$ ./dbca
    /bin/sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    [ oracle@datadayal bin ]$
    A Big thanks for your time and help.

    As mentioned already, OEL 5 is pretty new as compared to the 9i version that you are trying to install over it. So the chances that you would get a working database are very negligible here. That said, why you are installing 9i ? Why not 10g/11g?
    HTH
    Aman....

  • Getting error while installation of SAP on Linux 64 bit

    Dear All,
    me using redhat version 5
    database 10g
    Proceded installtion through VNC. while installation of oracle 10g getting some eror at 83% details mention below.
    Error in invoking target 'ntcontab.o' of makefile
    INFO: End output from spawned process.
    INFO: -
    INFO: Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/SOL/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-06-18_09-13-18AM.log' for details.
    Exception Severity: 1
    INFO: Exception handling set to prompt user with options to  Retry  Ignore
    User Choice: Retry
    INFO: The output of this make operation is also available at: ''/oracle/SOL/102_64/install/make.log'
    INFO:
    INFO: Start output from spawned process:
    INFO: -
    INFO:
    INFO: rm -f ntcontab.*
    INFO: (if [ "compile" = "compile" ] ; then \
              '/oracle/SOL/102_64/bin/gennttab > ntcontab.c
              gcc  -c ntcontab.c
              rm -f /'/oracle/SOL/102_64/lib/ntcontab.o
              mv ntcontab.o '/oracle/SOL/102_64/lib/
              /usr/bin/ar rv'/oracle/SOL/102_64/lib/libn11.a '/oracle/SOL/102_64/lib/ntcontab.o ; fi)
    INFO: /bin/sh:  line 2: gcc:  command not found
    INFO: mv: cannot stat `ntcontab.o'
    INFO: : No such file or directory
    INFO: /usr/bin/ar: '/oracle/SOL/102_64/lib/ntcontab.o: No such file or directory
    INFO: make: *** [ntcontab.o] Error 1
    INFO: End output from spawned process.
    INFO: -
    INFO: Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'ntcontab.o' of makefile ''/oracle/SOL/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-06-18_09-13-18AM.log' for details.
    Exception Severity: 1
    Request you to revert as soon as possible.
    ThankYou in Advance

    Dear,
    Thanks for your replay.
    command to check gcc version :        
    RPM -qa | grep gcc
    Output of this command.
    compact-gcc-34-g77-3.4.6-4
    libgcc-4.1.2-46.el5
    comact-gcc-34-c++-3.4.6-4
    libgcc-4.1.2-46.el5
    compact-libgcc-296-2.96-138
    compact-gcc-34-3.4.6-4
    pleae suggest if any updated version of gcc i have to installed or is this OK.
    I have ignore that error and click on continue after that my installation is finished sucessfull
    i have encounter one more problem
    ogon as root
    /oracle/oraInventory/orainstRoot.sh
    /oracle/<SID>/102_64/root.sh
    [root@ram 102_64]# ./root.sh
    ./root.sh: line 12: 01777: command not found
    ./root.sh: line 13: root: command not found
    ./root.sh: line 20: 01777: command not found
    ./root.sh: line 21: root: command not found
    ./root.sh: line 63: /bin/fmputl: No such file or directory
    ./root.sh: line 64: /bin/fmputlhp: No such file or directory
    ./root.sh: line 65: 550: command not found
    ./root.sh: line 66: 4555: command not found
    ln: creating symbolic link `/rdbms/filemap' to `/opt/ORCLfmap/prot1_64': No such file or directory
    .then getting error on create database at 13 phase
    checked ora_sql_result.log
    SAPINST:  Emd of output of SQL executing program /oracle/SOL/102_64/bin/sqlplus.
    SAPINST  found errors.
    SAPINST  the current process environment may be foun din SAPINST_ORA_ENVIRONMENT.log .
    SAPINST Oracle stop logging
    REquest you to please provide solution Asap.
    Thanks
    In  Advacbe
    Anant singh

  • FATAL ERROR while installation

    Hi
    Im trying to install SDK 7.1 as a requirement for MATLAB 2013 B and the installation stops with the error message "Fatal error during installation".
    The log file shows the following error:
    MSI (s) (CC:2C) [13:12:01:869]: Windows Installer installed the product. Product Name: Microsoft Windows SDK for Windows 7 (7.1). Product Version: 7.1.30514. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status:
    1603.
    13:12:01 27 April 2015: An error occurred installing the Microsoft Windows SDK for Windows 7 package. Error: Key not valid for use in specified state.
    13:12:01 27 April 2015: [SDKSetup:Error] Config_Products_Install: Installation of Product Microsoft Windows SDK for Windows 7 (failed): Fatal error during installation. Stack:    at Microsoft.WindowsInstaller.Installer.InstallProduct(String
    packagePath, String commandLine)    at SDKSetup.Product.ConfigureNewProduct(ManualResetEvent CancelEvent)
    13:12:01 27 April 2015: [SDKSetup:Info] Config_Products_InstallNew: End installation of new product: Microsoft Windows SDK for Windows 7
    13:12:01 27 April 2015: [SDKSetup:Error] Config_Products_Install: Windows SDK Setup (failed): Installation of the "Microsoft Windows SDK for Windows 7" product has reported the following error: Fatal error during installation. Stack:   
    at SDKSetup.Product.ConfigureNewProduct(ManualResetEvent CancelEvent)    at SDKSetup.Product.SetupProduct(TaskMode taskMode, ManualResetEvent CancelEvent)    at SDKSetup.ProductCollection.SetupProducts(TaskMode taskMode, DownloadManager
    downloadManager, ManualResetEvent cancelEvent)    at SDKSetup.ConfigProducts.DoCurrentTask(TaskMode Task)
    Some one please help me out.
    Regards
    Sankar

    Hi All,
    This problem was not related to BO, it was due to a Windows Write access to the Installation Directory. Our Windows Administrator has addressed the issue. The Upgrade went smoothly after this.
    Regards,
    Urmi

  • Error while Installation of Oracle 10g Database on Windows Vista

    while installating Oracle 10g DB on Win Vista Machine it shows the followsing error:-
    Abnormal program termination. An internal error has occoured.Please provide the fillowing files to Oralce Support:
    "Unknows"
    "Unknows"
    "Unknows"
    & OK buttons is there
    kindly provide me the solution for the same.

    Are you using the Oracle installation meant for Windows Vista or any other version?
    Its available here...
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html

  • Error While Installation of SOA SUITE 11g

    Hi
    I am installing SOA SUITE 11g on Oracle Linux 4.
    I have already installed Oracle database 11g
    I have installed Weblogic server 10.3.x
    I have checked oracle database , i am able to run it successfully.
    I have checked weblogic server too, its too running successfully.
    I have logged into server as *"oracle" user* and trying to run runInstaller from command prompt
    the trace for error getting generated is below. plz let me know where i am making mistake.
    I am new to SOA SUITE n related technologies..
    ++[oracle@localhost ~]$ cd SOA_SUITE/Disk1++
    ++[oracle@localhost Disk1]$ ls++
    ++doc install runInstaller setup.exe stage++
    ++[oracle@localhost Disk1]$ ./runInstaller++
    ++Starting Oracle Universal Installer...++
    ++Checking if CPU speed is above 300 MHz. Actual 1992 MHz Passed++
    ++Checking Temp space: must be greater than 150 MB. Actual 233511 MB Passed++
    ++Checking swap space: must be greater than 500 MB. Actual 5023 MB Passed++
    ++Checking monitor: must be configured to display at least 256 colors++
    ++>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<++
    ++Some requirement checks failed. You must fulfill these requirements before++
    ++continuing with the installation,++
    ++Continue? (y/n) [n] y++
    ++>>> Ignoring required pre-requisite failures. Continuing...++
    ++Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-02-23_05-49-23PM. Please wait ...++
    ++Please specify JRE/JDK location ( Ex. /home/jre ), <location>/bin/java should exist :++
    ++Please specify a valid JRE/JDK location :/root/Oracle/Middleware/jdk160_14_R27.6.5-32++
    ++Please specify a valid JRE/JDK location :++
    I am trying to give JRE/JDK location which i got when i was installing weblogic server but its not accepting that and i am getting
    "Please specify a valid JRE/JDK location : " message again.
    Please let me know how i can i get out of this error.
    Thanks
    vishnu kumar

    Hi,
    check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
    -jreLoc ,i.e;have the path in the cmd.
    ./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
    which should work.
    regards,
    Jitendra

  • Error while installation of PI 7.1 in SUSE Linux 10 SP2

    Hi,
    While doing installation, i am getting the error as "At least version 2.4-1 of the saplocales package is required for SuSE Linux Enterprise Server 10. Current version: not installed. See also SAP Note 171356.
    Even when, i am trying to install the saplocales using the command rpm -Uvh saplocales-2.4-4.x86_64.rpm
    I am getting the error as below
    error: Failed dependencies:
    sap-locale >= 1.0-25.5.3 is needed by saplocales-2.4-4.x86_64
    Please suggest the solution.
    Regards
    Karunakar

    Dear Karunakar,
    when using the latest prerequistie checker, there shouldn't be any request to install the saplocales package. This package delivers locales which are no longer supported, however when doing upgrades you might need them. These locales are for example SAPUNI, TRANSSIBERIAN or ASIAN UNIFICATION.
    Could you lay down, why you need these locales?
    Additionally, I strongly suggest to install the sap-locale package from Novell because it fixes serve locale issue with several glibc locales (tr_TR, lv_LV, ...). This package is available through the online update (maybe you have to set this up separately).
    More information about saplocales and sap-locale is available in SAP note 187864
    Thanks,
      Hannes
    PS: I forgot to mention, that saplocales 2-4.4 needs SP3 installed (but I stronly assume that you do not use the deprecated blended codepages at all)
    Edited by: Hannes Kuehnemund on Mar 2, 2010 4:58 PM

  • I got errors while installation of solution manager 4.0 sr2

    I faced the errors below while installing Solution Manager 4.0 sr2.
    How can I solve these problems?
    Thanks.
    ERROR 2007-03-13 17:30:12
    FSL-00001  System call failed. Error 13 (Permission denied) in execution of system call 'openU' with parameter (/opt/cdler/CD2/IM_HPUX_PARISC/COMMON/INSTALL/JDBCCONNECT.JAR, O_RDONLY), line (368) in file (syuxcfile.cpp).
    ERROR 2007-03-13 17:30:12
    FSL-02015  Node /opt/cdler/CD2/IM_HPUX_PARISC/COMMON/INSTALL/JDBCCONNECT.JAR does not exist.
    ERROR 2007-03-13 17:30:12
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-03-13 17:30:12
    FCO-00011  The step copyScripts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|copyScripts was executed with status ERROR .

    Hello Cemil,
    The errors you are recieving are most likely user or permissions
    related.
    Can you please verify that there are 777 permissions on the
    installation directories? Also are you installing as User Root?
    Are you installing from an NFS Mount or network drive? If so it could be
    possible that the user does not have enough permissions on this. If
    so I recommend copying the installation files to a local directory and
    retrying the installation from there.
    Best regards,
    Dolores

  • SCCM 2012 SQL database error while installation.

    Hi,
    I'm trying to install SCCM 2012 R2 in a test Lab. While completing installation I'm getting an error message "setup has encountered fatal errors during database initialization. check the log for details. click the view log button for more information"
    and installation finishes successfully. I'm using SQL server 2008 R2 with CU6 installed. SCCM Prerequisite checker shows only SQL memory and WSUS package warnings. Still I'm able to finish installation but not able connect SCCM. I'm installing Primary site.
    My system is running on Win 2k8 R2 SP1.
    Please help.
    Regards,
    Dhananjay

    In my experience you can get strange problems if you extract the ISO to a folder and run the setup from there (that seems to be what you have done).
    Try mounting the ISO directly and I believe you will have better success. You are using W2008R2 so you will need a 3rd party app (Virtual CloneDrive is a good one).
    (Obviously if this is a VM you can just add the ISO to the DVD drive)
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Error while installation of OID/OAM

    Hi,
    I am trying to install OID/OAM in vmware which is installed on linux. I have vmware installed with IP address a.b.c.d and it is accessible through IP address e.f.g.h.
    I am logging through putty from my local windows machine to e.f.g.h machine(which is also a linux) and from there am connecting to vmware(a.b.c.d).
    While starting the installation am getting the following error: Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.
    I have set Display variable to <windows machine ip>:0.0 but in vain. Please help me out to solve this.
    Thanks in Advance.

    Hi Colin,
    Thank You for your suggestion
    Following the note 888699.1 of oracle support i have tried " rpm -qf /usr/X1106/bin/xpdyinfo" which has given me " xorg-x11-6.8.2-1.EL.63 " as output.
    I have run the same rpm command in another machine where i am able to open gui and it gave me the same output.
    So i dont think there is any dependency on this rpm for gui.
    Please Suggest
    Hi Carlos,
    Thank You for your suggestion
    I am using putty to login to a.b.c.d server and set DISPLAY=<windows machine>:0.0 and xclock is running fine in this server. Now I am connecting to e.f.g.h server through ssh(from the same session) and again setting the DISPLAY=<windows machine>:0.0 and now if i run xclock it is giving me the error "unable to open display"
    Please Suggest
    Thanks in Advance

Maybe you are looking for

  • File Not Found error on local test server

    Hello all, I have no idea what happened, but my local test server went from working fine to not working at all. When I go to test a page locally, I get this error: The requested URL /[filename].php was not found on this server I did not change any of

  • Can't install Snow Leopard to iMac

    When I try installing snow leopard on my iMac I get the message, can't install this disc currently used for time machine backups (the disc is the iMac's internal hard drive). I tried installing with the computer already on and by booting directly fro

  • Need to install Latest Version of Netscape on Solaris 10.

    Hi, I want to install Latest version of Netscape on Solaris 10. I doubt it comes with the solaris 10 installation CD's. I can't find the downloads for Netscape. Please guide or suggest me in this regard. Thanks & Regards, -GnanaShekar-

  • Trouble with itemRenderer

    Hello all Just getting started with Flex using FlashDevelop. I have been copying and pasting sample code as well as writing my own snippets - the learning curve is steep but I'm loving it! I'm really stuck on the idea of a separate mxml file holding

  • Problem with canon mx870 printer in Word insists on using inkjet Hagaki media type

    My MX870  insists on using inkjet Hagaki media type in Word and printing with standard quality, no matter how many times I change it back to plain paper and fast quality.  I have tried everyhting I can think of short uninstalling and reinstalling the