Error while installing oracle 10g developer suite on windows xp

I am getting following error when i am trying to install the oracle 10g developer suite windows xp with sp3
+*"---------------------------*+
Oracle Universal Installer+
---------------------------+
Error in writing to directory c:\TEMP\OraInstall2010-03-18_12-57-52PM. Please ensure that this directory is writable and has atleast 55 MB of disk space. Installation cannot continue."+
Even i have enough space of my C drive plus i m the administrator on my PC. I changed the temp location as well and download the zip files(installation) again but it doesn't work. Kindly provide some solution for this error.

Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202) This means you already have ISA configured as proxy server. Disable the proxy from the browser and you should be able to access the application. Or simply add the application URL to the list of the proxy exceptions.

Similar Messages

Oracle 10g Developer suit in windows 7 Homebasic 64 bit

Dear All,
Can I install oracle 10g Developer suit in windows 7 Homebasic 64 bit.if possible.how to do.
please help me.
Thanks and Regards,
Fazil

Hello,
Please note that Developer Suite 10R2 is NOT certified(cannot be installed) for Windows 7 64-bit.
For an official statement check this note:
Forms / Reports Builder Certification on MS Windows 7 (Doc ID 1112213.1)
Developer suite 10gR2 is certified only on Windows 7 32-bit:
1292919.1 - Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)
You can install Developer suite 10R2 on Windows 64-bit in xp mode.
11gR2(11.1.2 version) is certified and can be installed on Windows 7 64-bit
Also IE9 is not certified with 10gR2.Check:
http://www.oracle.com/technetwork/developer-tools/forms/clientsod-forms10gr2-097528.html
Regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

Oracle 10g Developer Suit in Windows 7 64Bit Homebasic

Dear All,
I need to instal Oracle 10g Developer Suit in Windows 7 64Bit Homebasic
Can I install the following Products.
Oracle 10g Developer Suit and Oracle Database 11g
It will work?
Please help me.
Thanks and Regards,
Fazil

I have installed what you want to install on window 7 Ultimate 64-Bit,
It worked , but I needed to configure (TNSnames.cfg,create listener.cfg,sqlnet.cfg), I extremely recommend using windows XP or using XP mode(I haven't try XP mode but it's most likley to work).
Are you gonna Use internet forms or reports?

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

"Error In Writing to directory ..." getting the error while installing oracle 10g in laptop

Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayub

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

DBCA errors while installing Oracle 10g on Windows 7

Hi all,
I'm trying to install Oracle 10g database on Windows 7 operating system. Software is installed without any error. But it gets following exceptions while running dbca from $ORACLE_HOME/bin/ directory...
java.lang.NullPointerException
at oracle.sysman.oii.oiix.OiixPathOps.concatPath(OiixPathOps.java:553)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(
OiicStandardInventorySession.java:426)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:254)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:229)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:178)
at oracle.sysman.emcp.util.OUIInventoryUtil.getInstallInventory(OUIInven
toryUtil.java:117)
at oracle.sysman.emcp.util.OUIInventoryUtil.getAllCentralAgentHomeLoc(OU
IInventoryUtil.java:586)
at oracle.sysman.emcp.util.CentralAgentUtil.getCentralAgentHomeAndURL(Ce
ntralAgentUtil.java:296)
at oracle.sysman.emcp.EMConfig.getCentralAgentHomeAndURL(EMConfig.java:6
16)
at oracle.sysman.assistants.util.OsUtilsBase.enumerateAgents(OsUtilsBase
.java:1638)
at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.initializePage
(ManagementOptionsPage.java:402)
at oracle.sysman.assistants.util.wizard.WizardPageExt.onSetActive(Wizard
PageExt.java:94)
at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.onSetActive(Ma
nagementOptionsPage.java:482)
at oracle.sysman.assistants.util.wizard.WizardExt.wizardSelectionChanged
(WizardExt.java:166)
at oracle.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
at oracle.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.ewt.wizard.BaseWizard.doNext(Unknown Source)
at oracle.sysman.assistants.util.wizard.WizardExt.doNext(WizardExt.java:
237)
at oracle.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.button.PushButton.activate(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
It might be possible that I'm using wrong installation source for the same. It would be nice if anyone can lemme know which link from http://download.oracle.com to access for Oracle 10g R2 source on Windows 7?
Can anyone pls help me out to solve this query??
Thanks in anticipation.

At which point did it occur to you that Windows 7 was developed and released after any version of Oracle 10g and was both uncertified and untested on this platform? ;)
10g will fall off the cliff into desupport in just two weeks. Toss it out and install 11.2.0.1.

Error while installing Oracle 10g on CentOS 5.5

Hello,
I have been using the following url to install oracle 10g R2:
http://onaxer.com/blog/blog/tag/oracle-10g-r2-installtion-on-centos-5-5rhel/
I have copied the oracle 10g R2 linux version from windows to linux using FTP.
All the installer requirements have been met, but i'm getting the following error while running the installation:
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-21_03-11-44PM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-02-21_03-11-44PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Any help would be greatly appreciated.
Thanks.

Hi,
Download & Install the following rpm and retry oracle installation.
http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
installation
rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with the one from /usr/X11R6/lib/libXtst.so.6.
As root, issue the commands:
mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
ln –s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
Pubudu

Error while installing ORACLE 10G on Windows

Dear All,
Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error
ERROR : ERROR IN Writing to direcotory c:\documets~\rajeshrr~1\temp\Orainstall2009-08-23.Please ensure direcotory is writable and has alteast 45mb disk space.Installaion can not continue.
While installing i have credential of administrator i.e. for rajeshr is in ADMINISTRTAOR group.
Please inform any thing need to be need from my side.
Thanks in advance.
Regards,
Rajesh.
Edited by: Rajesh.Rathod on Aug 23, 2009 6:17 AM

Rajesh.Rathod wrote:
Dear All,
Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error Which Oracle 10g on which Windows version ?
Nicolas.

Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit

I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.

865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration.

Error while installing oracle 10g in redhat Server

Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help me

Thanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Error while installing Oracle 10G Grid control in RHEL

I was installing Oracle 10G Grid control in RHEL. Got the following error. Any idea what this means and what is the remedy?
=======================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
/home/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /home/oracle/jre/1.1.8/bin/../lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Configuration assistant "Oracle Net Configuration Assistant" failed
=======================================
regards,
Anjan

I saw this once but I forgot how I solved it. I believe that I made a softlink to the libc.so.6 from another libc. Have a look on Metalink, becauses I've got the idea for my solution there.
cu
Andreas

Error while installing oracle 10g developer suite on windows xp

Similar Messages

Maybe you are looking for