Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS

I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.

Hi tarunkw,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Error while Installing Oracle Services for Microsoft Transaction Server

    I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
    Error while Installing Oracle Services for Microsoft Transaction Server
    The specified key was not found while trying to GetValue
    - stop installation of all products.
    - stop installation of this component only.
    The installation of Oracle 9i Database was unsuccessful
    The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
    I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

    HI Salman,
    I am doing the following.
    1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
    Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
    I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
    If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
    Could Not start the OracleMTSRecoveryService on the local computer.
    Error 3: The system cannot find the file specified.
    Any help on how to resolve this issue will be highly appreciated

  • "Software currently unavailable" error while installing printer

    I have a Brother MFC-465CN multifunction printer that I used as a standalone USB printer for over a year from my 27" Mac. I recently connected it to my router (printer is networkable) so that I can share with my windows 7 PC. I am easily able to print from my Windows PC. My Mac recognizes the network printer correctly System Preferences, Print&Fax, + to add Printer) - Shows Printer Name and Kind as "Bonjour" - even tells me that my selected printer software is available from Apple. When I try installing I get an error message saying "The software is currently unavailable" - Any ideas? The most frustrating part is that I am not even able to install the printer as a USB printer anymore - I get the same error.

    The drivers and utilities on the CD-ROM for Mac OS® X 10.5 or earlier bundled with your Brother machine are NOTcompatible with Mac OS® X 10.6.
    Download the correct printer driver here:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadindex.html?reg=us&c=us&lang=en&prod=mfc465cnall&type2=all&type3=79&os=94&flang=all&dlid=
    I think you also need a current driver for the Scanner:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadindex.html?reg=us&c=us&lang=en&prod=mfc465cnall&type2=all&type3=20&os=94&flang=all&dlid=

  • Error while installing a patch for Mainwin 5.0.2 on Solaris 2.8

    Hi,
    I am relatively new in this field, so i apologise for any slip-ups.
    We use a Solaris 2.8-SPARC server. I was given an external drive which contained the porting software Visual Mainwin 5.0.2 and was told to install it from the drive. On checking it, i found that the entire folder structure of the software was damaged, i.e. every file of the software was changed to uppercase. UNIX being highly case-sensitive, i manually changed each and every file present in the software directory to lowercase and then ran it.
    The software ran fine, it got installed and the license server was also up. the licenses were also nicely distributed. everything was fine until i was asked to install the patch 'vmw502_sunos5_HF1.sh'. While installing i got the following output :
    # sh vmw502_sunos5_HF*
    Extracting installation package to "/tmp/mwspselfextr27624".
    Please stand by ... Done.
    =====================================================================
    Visual MainWin Patch Installation
    HF1 for VMW 5.0.2 <sunos5> 24-Jul-2003.14:01 Cycle115
    =====================================================================
    ***Error: cannot find file
    /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini
    Something wrong with your Visual MainWin installation - aborting
    when i checked the installation directory, i found that the file 'mwversion.ini' was present inside the directory 'mwver'. I cant see any reason why the patch is not recognizing the file.
    Can anybody help?? Any kind of help will really be appreciated.
    -SD

    Hope you already tried: ls -l /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini If ls returns the file name, try running the script under truss to find some clues.
    % truss -f -vall -rall -wall -o /tmp/mwpatch.log sh vmw502_sunos5_HF*

  • Sapinst stops with error while installing ess component for Java AS

    Dear experts,
    I really hope you can help me with this one,
    We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely,
    but then stopped with error while deploying components for the Java AS:
    ERROR 2009-03-30 13:01:27
    CJS-30156  SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS/CI/callSdmViaSapinst.log' for more information.
    ERROR 2009-03-30 13:01:28
    FCO-00011  The step enableUsageTypes with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|15|0|enableUsageTypes was executed with status ERROR .
    Any help would be really appreciated as I am stuck with this and dont seem to be able to find any information on this one.
    Thanks a lot for your help in advance.
    Here is the crucial part of callSdmViaSapinst.log:
    Mar 30, 2009 12:55:18... Info: Starting: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'788220'/'0' will be deployed.
    Mar 30, 2009 12:55:18... Info: SDA to be deployed: D:\usr\sap\DE1\DVEBMGS00\SDM\root\origin\sap.com\ess\bp_ess\MAIN_ERP05VAL_C\0\788220\sap.com_ess~bp_ess.sda
    Mar 30, 2009 12:55:18... Info: Software type of SDA: J2EE
    *Mar 30, 2009 12:55:18... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
    Mar 30, 2009 1:00:21 PM  Info: Begin of log messages of the target system:
    *09/03/30 12:55:19 -  ************************************************************
    09/03/30 12:58:07 -  Start updating EAR file...
    09/03/30 12:58:07 -  start-up mode is lazy
    09/03/30 12:58:08 -  EAR file updated successfully for 578ms.
    09/03/30 12:58:08 -  Start deploying ...
    09/03/30 12:58:42 -  EAR file uploaded to server for 30641ms.
    09/03/30 13:00:20 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/ess~bp_ess..
                         Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive D:\usr\sap\DE1\DVEBMGS00\j2ee\cluster\server0\.\temp\deploy\work\deploying\reader1238414327258\sap.comessbp_ess.epa
                   The following objects could not be locked: [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess**.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.mx/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.id/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.jp/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.es

    Thanks Désirée for your answer and apologies for the late update on this one.
    This issue is resolved now, the reason for the error was a lack of memory which probably triggered a timeout in sapinst. After upgrading the memory to 7GB and re-starting the ABAP+Java AS and resuming sapinst everything went through fine. However, this was hard to spot because the logs wouldn't tell you about the lack of memory but about everything else!
    regards,
    Manfred

  • How do i install printer software for wireless connection for a notebook?

    Product name: Photosmart 6510
    What to do when my notebook laptop does not have a disk drive but has wireless internet. How can I install the printer software on the CD?
    Kind regards

    You can download the printer software from the internet. Here is the link for your specific printer: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058336&cc=us&dlc=en&lc=en&product=50583...
    Choose your operating system and then go to Driver--Product Installation Software and choose the Basic or Full driver.
    Let me know if you have additional questions.
    I work for HP.

  • Help required- error while installing HANA Live for ERP deployment

    Hello Mentors,
    While installing HANA Live I am stuck with the below attached error. Also attached are the relevant logs.
    I could see that many people faced the similar issue, but unfortunately none has posted the final solution.
    I have tried to implement each and every step as mentioned in the below discussion forums-
    http://scn.sap.com/thread/3415156
    http://scn.sap.com/thread/3488174
    I have already opened a ticket for SAP, but their turn around time has kept me waiting for long with no progress
    Please give me some pointers....
    Thanks,
    Atul

    Any suggestions plz...??
    Thanks,
    Atul

  • Error while installing transfer rules for 0PM_C03 from Business content

    Hi All,
    When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
    "Mapping between 2LIS_17_I3HDR  2LIS_17_ORDER is inconsistent".
    Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR  is the datasource.
    Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
    Kindly help...

    Hi,
    The datasource and infosource can have different names no issue with that.
    and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
    Regards,
    Rathy

  • Have an ibookg4 with mac osx version 10.4.11 trying to install printer software for lexmark z22 softwaredisk is for mac8.6/9

    i have an iBookG4 with mac OSX10.4.11 i am trying to install software for my lexmark z22 printer disk is for mac 8.6/9 can i do this install.  i just got this  mac use to having a pc.  thank you for any help

    Hi, michele -
    That disk is of no use - it has drivers for OS 9 and earlier, which are useless in OSX.
    OSX 10.4 already includes drivers for that printer model. See this Apple KBase article -
    http://support.apple.com/kb/ht1468
    Scroll down to the Lexmark entry, click the link to show included drivers. In the matrix on the new page it lists the Z22 model.

  • Error while installing "Identity Synchronization for Windows"

    Hello All,
    I am in the middle of installing Identity Synchronization for Windows and I am running into a probelm.
    After I gave the ldap address of the Java Directory server, (which is installed in the same machine that I am installing ISW on), then I specified the "Configuration Root Suffix" , and then I gave the "cn=Directory Manager" credentials, It returns an error saying...
    The selected Directory Server is not a configuration
    directory server. You must select a directory server that
    has "o=netscaperoot". Please note that merely adding the
    +"o=netscaperoot" entry will not suffice.+
    I am running Solaris 10 (SPARC) on a T2000, and I downloaded the latest version of "Sun Java System Directory Server Enterprise Edition" (6.2 I think it is...is there a way to find out?) and I downloaded ISW (1.1 SP1) from Sun.com...
    Anyone else had this problem? Any solutions? Thanks.
    -C

    That was that !
    The proof:
    possum@laptop ~/Downloads/Sun/Directory Server $ tar tvzf DSEE.6.2.Solaris-Sparc-full.tar.gz | more
    drwxr-xr-x svbld/staff       0 2007-08-21 13:51 DSEE_Directory_Editor/
    -rw-r--r-- svbld/staff 3154227 2006-10-23 15:23 DSEE_Directory_Editor/DE_InstallConfigGuide.pdf
    -rw-r--r-- svbld/staff  113483 2006-10-23 15:23 DSEE_Directory_Editor/DE_ReleaseNotes.pdf
    -rw-r--r-- svbld/staff 9649312 2006-10-23 15:23 DSEE_Directory_Editor/de.class
    -rw-r--r-- svbld/staff     178 2006-10-23 15:23 DSEE_Directory_Editor/install.bat
    -rw-r--r-- svbld/staff     167 2006-10-23 15:23 DSEE_Directory_Editor/install.sh
    drwxr-xr-x svbld/staff       0 2007-08-21 13:53 DSEE_Identity_Synchronization_for_Windows/
    -rw-r--r-- svbld/staff     831 2007-08-21 13:53 DSEE_Identity_Synchronization_for_Windows/README.txt
    drwxr-xr-x svbld/staff       0 2006-11-07 01:32 DSEE_Identity_Synchronization_for_Windows/installer/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:16 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:17 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:16 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/
    drwxr-xr-x svbld/staff       0 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/
    drwxr-xr-x svbld/staff       0 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/
    -rwxr-xr-x svbld/staff  186114 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_zh.properties
    -rwxr-xr-x svbld/staff  163040 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_es.properties
    -rwxr-xr-x svbld/staff  163040 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_es_ES.properties
    -rwxr-xr-x svbld/staff  184456 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_zh_TW.properties
    -rwxr-xr-x svbld/staff  233399 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_ko.properties
    -rwxr-xr-x svbld/staff  233399 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_ko_KR.properties
    -rwxr-xr-x svbld/staff  162199 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_de.properties
    -rwxr-xr-x svbld/staff  162199 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_de_DE.properties
    -rwxr-xr-x svbld/staff  172057 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_fr.properties
    -rwxr-xr-x svbld/staff  172057 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_fr_FR.propertiesSo, we need both packaging: native PKG and tar.gz ! Great !
    I think this thread can be marked as resolved now.

  • Accessing printer software for HP Deskjet 3050A J611 series with Windows 7

    There is currently a problem with the HP Deskjet 3050A J611 series software on my computer.  It used to be when I clicked on my desktop icon (or launched this program from my start menu) I would see a list of option such as check ink levels, scan a picture, search for help, and so forth.  Now the screen shows only this:
    http://i174.photobucket.com/albums/w82/RedComet01/HPscreen.jpg
    Clicking on HP Printer Assistant does nothing.
    My computer is a Dell Inspiron 620 with a Widows 7 Home Premium (64 bit, service pack 1) operating system.
    Does anyone know what might be a solution to my problem?

    Installing the latest full software package from HP should fix the problem of the buttons disappearing. These printers use the same basic software, and what I said is true for both. HP fixed the problem in version 28.8 of the software. I'll link it below for the 5514 and the 3050A.
    Deskjet 3050A: HP Deskjet Full Feature Software and Drivers
    Photosmart 5514: HP Photosmart Full Feature Software and Drivers
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Error while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server

    Hi.. I'm getting error messages in the Database Instance phase, while installing <b>CRM 4.0 SR1 with Oracle 10.2</b> on Windows 2000 Server. Following are message snippets with last few lines showing error message:
    <b>SAPSSEXC.log</b>
    [code](DB) INFO: REPOSRC~0 created
    (DB) INFO: REPOTEXT created
    DbSl Trace: ORA-4031 occured when executing SQL statement (parse error offset = 0)
    (IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
      rc = 99, table "REPOTEXT"
      (SQL error 4031)
      error message returned by DbSl:
    ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select name,intcol#,segcol#,...","Typecheck","opndef:qkexrAddMatching1")
    (DB) INFO: disconnected from DB
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144208
    [/code]
    <b>SAPAPPL2.log</b>
    [code](DB) INFO: SMOT413~0 created
    (DB) INFO: SMOT413~R04 created
    DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 31)
    (DB) ERROR: DDL statement failed
    (CREATE  INDEX "SMOT413~R05" ON "SMOT413" ( "MANDT" , "ERSKZ"  ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
      (SQL error 604)
      error message returned by DbSl:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","select owner#,name,namespace...","Typecheck","seg:kggfaAllocSeg")
    (DB) INFO: disconnected from DB
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144207
    [/code]
    <b>SAPSLEXC.log</b>
    [code]DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
    (DB) INFO: CO2MAP created
    (IMP) INFO: import of CO2MAP completed (0 rows)
    (DB) INFO: CO2MAP~0 created
    (DB) INFO: CO2MAP~IDX created
    DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
    (DB) ERROR: DDL statement failed
    (CREATE TABLE "CO2MAPINF" ( "SRCID" VARCHAR2(30) DEFAULT ' ' NOT NULL , "METHID" VARCHAR2(1) DEFAULT ' ' NOT NULL , "APPLNAME" VARCHAR2(30) DEFAULT ' ' NOT NULL , "PAGEKEY" VARCHAR2(70) DEFAULT ' ' NOT NULL , "ID" NUMBER(10) DEFAULT 0 NOT NULL , "LANGUAGE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "NAMESPACE" VARCHAR2(30) DEFAULT ' ' NOT NULL  ) TABLESPACE PSAPCRM620 STORAGE (INITIAL 16384 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
      (SQL error 604)
      error message returned by DbSl:
    ORA-00604: error occurred at recursive SQL level 2
    ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select ts#,file#,block#,nvl(...","Typecheck","opndef:qkexrAddMatching1")
    (DB) INFO: disconnected from DB
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144742
    [/code]
    <b>SAPSDIC.log</b>
    [code](DB) INFO: TNMAP~0 created
    (DB) INFO: TODIR created
    DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
    (IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
      rc = 99, table "TODIR"
      (SQL error 604)
      error message returned by DbSl:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
    (DB) INFO: disconnected from DB
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
    [/code]
    <b>SAPSDOCU.log</b>
    [code](DB) INFO: TLSY3~0 created
    (DB) INFO: TLSY5 created
    (IMP) INFO: import of TLSY5 completed (3 rows)
    DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 33)
    (DB) ERROR: DDL statement failed
    (CREATE UNIQUE INDEX "TLSY5~0" ON "TLSY5" ( "LANGU", "REL", "OLD_REL", "IMP_DATE" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
      (SQL error 604)
      error message returned by DbSl:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
    (DB) INFO: disconnected from DB
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
    C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
    [/code]
    I am not sure but I think the problem is with the allocated shared memory size, which right now is:
    <b>init.ora</b>
    [code]shared_pool_size = 67108864[/code]
    <b>init<SID>.ora</b>
    [code]shared_pool_size = 90112000
    shared_pool_reserved_size = 9011200
    [/code]
    If this is the cause of the problem then how much should i increase it to? and do i need to modify the size in both files or only init<SID>.ora? Is there any SAP Note related to this problem? Thanks.
    Regards,

    Hi Vasu,
    ORA-4031... for 99%  of cases this means one thing:
    the database instance is not configured correctly.
    To proceed, do the following:
    1. get rid of init.ora (it's not used at all)
    2. make sure that the init<sid>.ora file is really used.
       If there is a spfile in the %ORACLE_HOME&/database folder
       then this will be used.
    3. With your  configured shared pool of 85MB your memory should really not be filled up - anyhow it's really too small for a SAP system!
    Thus I'd check how much memory the other sga-area members (buffer cache, large pool, streams pool, java pool...) take up.
        Remember on Windows 32 Bit, everything runs in one single process that can only allocate 2GB (or 3GB if you've set this option).
    See note:
    <a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=869006&_NLANG=E">#869006 - Composite SAP note: ORA-04031</a>
    for more on this.
    And when you're setting up parameters anyway, check note
    <a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=830576&_NLANG=E">#830576 - Parameter recommendations for Oracle 10g</a>
    KR Lars

  • Error when installing drivers & software for Photosmart C410a

    Hi - I have a Photosmart C410a that I am trying to use with a 64-bit Windows 7 SP1 laptop, with an Intel i5-2520M CPU.  The printer was working with this laptop a while ago (back in March), but I applied a Windows update sometime in March, and since then the printer has not worked.  I've tried several times over the past few months, but have had the same result everytime.  Today I've been working on this for 11 hours (no, I'm not kidding...)
    I've tried downloading the latest full software suite and basic drivers (separately) from the HP website, and I tried using the CD that came with the printer.  I tried the Windows 7 wizard and diagnostic utilities available on the HP website.  I've tried setting it up with a USB cable and wirelessly.  I've used the ccc uninstaller to get a clean start, and have followed the instructions of the troubleshooting guides.  But no luck.
    I have this printer installed on another Windows 7 64-bit system, using a wireless connection, and it is working fine.  However, on the 2nd system I cannot get the software or drivers to install.
    The error I get varies a little depending on if I try the USB or wireless installation method, but the consistent parts is "Exit Code = 1603".  When trying to install with the USB cable the error is:
    When I try the wireless install I get this:
    I tried reregistering atl.dll and the windows installer (as suggested here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02455020&lc=en&cc=us&dlc=en&product=4059652#N38...
    Nothing has worked.  Does anyone have any new suggestions?  Thanks.

    It appears if you are unlucky enough to get ths recurrent fatal error(asI I have) and are not a pc tech,   you have purchased a door stop.  I have purchased hp printers for years but this will be the last.   Like the previous consumer,  I have wasted countless hours on this correction.... Will never happen again.   I will not double the cost of the printer paying consultants who swoop in like vultures to correct the problem. 

  • Error when installing CD Software for Treo 650

    For some reason or another, it does not look like their are any scratches on my installation CD that I got with my Treo 650, but when I go to do the install, it almost completes the install and then it gives me an error message that says: Error 1316.A  network error occurred while attempting to read from the file
    C:\WINDOWS\Installer\palmOne.msi
    I have no idea of why I can not install this CD to my computer, any help?
    I no that this CD comes with the software so that I can sync my Treo with my Outlook, and that is all I am trying to do at this time.
    Post relates to: Treo 680 (Rogers)

    thanks so much for your reply, I thought it was XP but my hjusband might have installed Vista, I am going to check with him today when he comes home and then I will let you know, I did read that there was some issues with Vista though
    thanks

    Post relates to: Treo 680 (Rogers)

  • Error while installing itunes software on windows vista 32 bit operating system.

    Hi friends,I am getting an itune installation error,Microsoft.VC80.CRT.version=8.0.50727.4053,The operating system in windows vista,i donwloaded itunes with IE as well as firefox,but always same error message is coming.Please help me out with this error.

    I browsed this page earlier, and now im back to explain how i fixed my problem which is similar to yours.
    All of the below must be followed manually: (that windows msgbox error is just confusing you) be reminded that:
    %appdata% is not a network location. It is a systemwide variable used by Windows OS. %appdata% is a directory on your computer
    I have win 7 OS, and i tweaked the below values so the Nokia_PC_Suite will install:
    follow ALL of the following one by one:
    -----first, the package----
    first, go to the file which you downloaded from the net, (usually: Nokia_PC_Suite_eng_web.exe) right click the file and click properties, then click the compatibility tab and tick "Run this program in compatibility mode for:" then (select your OS on drop down box) then also click the lowermost button, "Run this program as administrator" then click OK. and close the properties box.
    ----second, the registry----(carefull a little mistake will render your machine unusable, so don't mess inside registry)
    enter your registry by >> Start > Run > "type" regedit (without the word type) expand the following:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders, (on the right pane) you will see AppData, double click AppData and change the value to: %USERPROFILE%\AppData\Roaming
    do the above to below location also: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Explorer\User Shell Folders
    ----third, Windows environment variables----
    in your windows, right click the "My Computer", then click "Properties" then click the Advanced tab, on the lowermost of the window click the button [Environment Variables], click edit and change the value of "Temp" to variable value: %USERPROFILE%\AppData\Roaming.
    Now double click (re-install) the Nokia package which you have downloaded from Nokia website and i hope it will install flawlessly this time

Maybe you are looking for