Error While loading data from 8 DSOname to Cube.

Hi All,
while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull.
Thanks and Regards,
santosh.

HI All,
In ST22 i'm getting Short Dump, the Error massage is
MESSAGE_TYPE_X
WHAT HAPPEN
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error Analyis is:
Short text of error message:
Generic process chain
Long text of error message:
Technical information about the message:
Message class....... "RSMPC"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
"MESSAGE_TYPE_X" " "
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
"IF_RSPC_EXECUTE~EXECUTE"
there is any Patch Problem...
Please let me Know how to resolve this issue.
thanks and regards,
santosh.

Similar Messages

  • Error while loading data from DS into cube

    Hello All
    I am getting the below error while loading data from Data source to the cube.
    Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
    Wht am i suppose to do?
    Need ur input in this regard.
    Regards
    Rohit

    Hi
    Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
    If your business is April to March make it as  'V3'
    If your business is January to Decemeber make it as 'K4'..
    activate your update rules delete old data and upload again....
    Hope it helps
    Thanks
    Teja

  • Error while loading data from ODS to CUBE.

    Hi friends,
    When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN  DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
    Its is showing like this .
    Transfer Rules : Missing Massage.
    Update PSA : missing massage.
    Processing end : missing message.
    I have checked the coding in update rules, everything is ok.
    Plz any inputs.
    hari
    Message was edited by:
            hari reddy

    Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
    Regards,
    Vitaliy

  • Error while loading data from DSO to Cube

    Dear Experts,
    I have change update routines of the update rule for DSO & update rule between DSO & cube. when i uploading data in DSO , working fine. But when uploading from DSO to cube , it giving error.
    Error Message :
    DataSource 8ZDSO_ABB does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 30.09.2010 14:05:17.
    The time stamp in the BW system is 09.05.2008 16:41:10.
    I executed program RS_TRANSTRU_ACTIVATE_ALL , still giving same error.
    Regards,
    Anand Mehrotra.

    Dear Experts,
    Thanks for help.Problem solved.
    Regards,
    Anand Mehrotra.

  • Error while loading data from a file on application server

    Hi all,
    Facing an error while loading data from a flat file.
    Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
    I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
    Can you please tell me what could be the problem?
    Thank you all,
    Praveen

    Hi all,
    As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
    10/21/2006  5:11:48 AM which i need to change to 10/21/2006
    one more note is i have some of the fields as NULL in this field
    Last Updated Date
    10/21/2006  5:11:48 AM
    10/21/2006  5:11:48 AM
    NULL
    NULL
    10/21/2006  5:11:48 AM
    NULL
    I want to display the values as 10/21/2006 and NULL as it is.
    Please let me know if we have a conversion routine in datasource which can solve my problem.
    Regards,
    Praveen

  • Error while loading data from 0FI_TX_4 to ODS

    Dear Friends,
    One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
    Short dump is raised in R3 system.
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "SAPLBWFIR" or "LBWFIRU13"
    "BWFIR_READ_BSET_CPUDT_DATA"
    ORA-01555
    The number of records are below 10000 only.
    All other chains are OK.
    we have already searched SDN and Notes...and applied below solution, but still no use
    Increase the size of all the roll back segments
    Increase number of REDO logs
    Decrease the number of records per data packet
    Any more suggessions please ??
    Thanks
    Tony

    How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
    Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
    I know you have read so many threads on the  same but what I am suggesting is what I have done and successfully rectified this issue.
    regards,
    rocks

  • ERROR :  "Exceptions in Substep: Rules" while loading data from DSO to CUBE

    Hi All,
    I have a scenario like this.
    I was loading data from ODS to cube daily. everything was working fine till 2  days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error  "Exceptions in Substep: Rules" after some package of data loaded successfully.
    I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again  "Exceptions in Substep: Rules".
    Can any one tell me how to come out from this situation ?
    Regards,
    Komik Shah

    Dear,
    Check some related SDN posts:
    zDSo Loading Problem
    Re: Regarding Data load in cube
    Re: Regarding Data load in cube
    Re: Error : Exceptions in Substep: Rules
    Regards,
    Syed Hussain.

  • Error while loading data from application server

    Hi all,
    Am facing a problem while loading data from application server.
    The error i get is ....
    *" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
    'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
    when i copy these values into a CSV onto a desktop and load,load is successful.
    Please let me know your views.
    Thanks&Regards,
    Praveen

    It looks like the system is trying to convert Rental/Lease to a number format.   Is the info object type CHAR or NUMC or ???  I would look there.
    Also, make  sure / is in RSKC.
    Brian

  • Error while loading data from R/3 to PSA

    Hi,
    While loading data from R/3 to PSA i am getting error 'the argument 0.6 j cannot be interpreted as a number when assing application structure.Actually in R/3 0.6 and JPY are 2 different columns.So when loading  J is getting concatenated with 0.6,so i think i am getting this error.
    Hope i am clear.
    please help me to resolve this issue.
    Thanks in Advance,
    Girish

    Hi,
    U have to go thru the note and chk/compare the settings with ur system...i.e packages, levels...
    If not take the assistance from BASIS...
    Note; And also all the notes may not be the exact note tht matches ur issue always...its jst a comparision within our system...If it doesn't solve our issue we have to search for another alternative...
    rgds,

  • Error while loading data from ECC to BI

    Hi BW Experts,
    while loading data from ECC 6.0 to BI  i got error in details tab of the infopackage as datapackage 1  arrived in bw processing not yet finished.
    Could any one help me out?
    Thanks

    Amar,
       please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
    to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
    once this over check the TRFC or IDocs struck
    if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
    if you are finding TRFcs are in stuck just select and run manually to complete.
    M

  • Error while loading data from FDM (EPM 11.1.1.3)

    Hi,
    We are loading data into HFM from FDM. While loading data from FDM it is throwing an error which as below.
    "Load data started: 5/20/2012 9:30:45 PM
    Line 27, Error: Cell for Period Mar is not an input cell.
    Actual,2011,Mar,YTD,ENT_JJ,JPY,A23232323,ENT_J76;[None];[None];[None];ICP_Load;3463437"
    There were multiples lines which are throwing error.
    After doing some checking we found that when we unpost ICP data in HFM we were able to load data from FDM. We have not locked the ICP entities because that will restrcit to load data. But we are not able to understand just unposting the ICP values why we are able to load data from FDM. Also we have not closed the period in HFM.
    Kindly suggest, what could be the possible reason.
    Thanks
    Edited by: user12121146 on May 27, 2012 5:29 AM

    one way to figure this out, would be to open a grad at the same POV.
    It will rule out a couple things.
    If it is locked, you'll visually see that it is locked. (will be grey I believe)
    If it is an invalid intersection, you'll see that as well. (will be red)
    If you do not have access to the cell, you will see that if you look at cell status, it will say NO ACCESS.
    That should help you figure out what is happening, the quick and dirty way.

  • Error while loading data from R/3 into DSO

    Hi,
    While loading data from 2lis_02_s012 into a DSO the following error occured:
    =============================================
    Diagnosis
        Updating for the information structure is still activated in client 150
        (and possibly also in other clients).
    System Response
        o   It is not possible to upload data in the initial mode.
        o   Generation of the delta update was terminated.
    Procedure
        1.  Switch off updating in all system clients.
        2.  Repeat the relevant activity.
    =============================================
    Anyone plz help me in solving the issue.
    Thanks & Regards,
    VN.

    Hi VN,
    1. Incase you do full update , system will allow you to load without any error.
    2. In case you want to do init then
          Lock users
          Stop the update in the system .
          Load init Package
          Start the update
          Unlock users.
          Load delta package.
    Hope it helps.
    Regards
    Mr Kapadia

  • Error while loading data from write optimized ODS to cube

    Hi All,
    I am loading data from a write optimized ODS to cube
    I have done Generate Export Datasource
    schedulled the info packge with 1 selection for full load
    then it gave me following error in Transfer IDOCs & TRFC
    Info IDOC 1: IDOC with errors added
    Info IDOC 2: IDOC with errors added
    Info IDOC 3: IDOC with errors added
    Info IDOC 4: IDOC with errors added
    Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
    Processing below is green
    shows update of  4 new records to Datapackage 1.
    Please provide inputs for the resolution
    Thanks & Regards,
    Rashmi.

    please let me know, What more details you need?
    If I click F1 for error details i get following message
    Messages from source system
    see also Processing Steps Request
    These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
    From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
    Thanks & Regards,
    Rashmi.

  • Job cancelled While loading data from DSO to CUBE using DTP

    Hi All,
      while i am loading data frm DSO to CUBE the job load is getting cancelled.
    in the job overview i got the following messages
        SYST: Date 00/01/0000 not expected.
       Job cancelled after system exception ERROR_MESSAGE
    wt can be the reason for this error as i have successfully loaded data into 2 layers of DSO before loading the data into the CUBE

    hi,
    Are u loading the flat file to DSO?
    then check the data in the PSA in the date field and replace with the correct date.
    i think u r using write optimised DSO which is similar to PSA it will take all the data from PSA to DSO.
    so clear the data in PSA and then load to DSO and then to CUBE.
    If u dont need a date field in CUBE then remove the mapping in transformation in cube and activate and make DTP activate and trigger it it will work.

  • Error while loading data on to the cube : Incompatible rule file.

    Hi,
    I am trying to load data on to essbase cube from a data file. I have a rule file on the cube already, and I am getting the following error while loading the data. Is there any problem with the rules file?
    SEVERE: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
    com.essbase.api.base.EssException: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
         at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
         at com.essbase.server.framework.EssOrbPluginDirect.essMainBeginDataload(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
         at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
         at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin.essMainBeginDataload(Unknown Source)
         at com.essbase.api.datasource.EssCube.beginDataload(Unknown Source)
         at grid.BudgetDataLoad.main(BudgetDataLoad.java:85)
    Error: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
    Feb 7, 2012 3:13:37 PM com.hyperion.dsf.server.framework.BaseLogger writeException
    SEVERE: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
    com.essbase.api.base.EssException: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
         at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
         at com.essbase.server.framework.EssOrbPluginDirect.essMainLoadBufferTerm(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
         at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
         at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin.essMainLoadBufferTerm(Unknown Source)
         at com.essbase.api.datasource.EssCube.loadBufferTerm(Unknown Source)
         at grid.BudgetDataLoad.main(BudgetDataLoad.java:114)
    Error: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
    Thanks,
    Santhosh

    " Incompatible rule file. Duplicate member name rule file is used against unique name database."
    I am just guessing here as I have never used the duplicate name functionality in Essbase, nor do I remember which versions it was in. However with that said I think your answer is in your error message.
    Just guessing again.... It appears that your rule file is set to allow duplicate member names while your database is not. With that information in hand (given to you in the error message) I would start to explore that.

Maybe you are looking for