Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

Hi all,
I m getting following error while loading the data into cube.
"Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
amit shetye

Hi Amit,
This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
Hope it Helps
Srini

Similar Messages

Error while loading data into cube

hi BW gurus,
when ever i am trying to load data into the cube from flat file after scheduling iam getting short dump in BW system. I checked it in st22 it is giving me a error as exception add_partition_failed. please help me to sort out this problem. If you know the error recovery please give me the answer in detail.
I will assign points for good answers.

This is what the note says:
Symptom
The process of loading transaction data fails because a new partition cannot be added to the F fact table.The loading process terminates with a short dump.
Other terms
RSDU_TABLE_ADD_PARTITION_ORA, RSDU_TABLE_ADD_PARTITION_FAILED, TABART_INCONSITENCY, TSORA, TAORA , CATALOG
Reason and Prerequisites
The possible causes are:
SQL errors when creating the partition
Inconsistencies in the Data Dictionary control tables TAORA and TSORA
Solution
BW 3.0A & BW 3.0B
In the case of SQL errors:Analyze the SQL code in the system log or short dump and if possible, eliminate the cause. The cause is often a disk space problem or lock situations on the database catalog or, less frequently: the partitioning option in the ORACLE database is not installed.
The most common cause of the problem is inconsistencies in the TAORA and TSORA tables. As of Support Package 14 for BW 3.0B/Support Package 8 for BW 3.1C, the TABART_INCONSITENCY exception is issued in this case. The reason is almost always missing entries in TSORA for the tablespaces of the DDIM, DFACT and DODS data classes.
The TAORA table contains the assignment of data classes to data tablespaces and their attributes, for example:
Tablespace Data class
DDIM PSAPDIMD ........
DFACT PSAPFACTD ........
DODS PSAPODSD .......
Foreach data tablespace, the TSORA table must contain an entry for the corresponding index tablespace, for example:
TABSPACE INDSPACE
PSAPDIMD PSAPDIMD
PSAPFACTD PSAPFACTD
PSAPODSD PSAPODSD
In most cases, these entries are missing and have to be added. See also notes 502989 and 46272.

Getting error while loading Data into ASO cube by flat file.

Hi All,
i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
does anyone have solution.
Regards,
VM

Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
Cheers
John
http://john-goodwin.blogspot.com/

Error while loading data into External table from the flat files

HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
Kartheek

Kartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry

Error while loading data into clob data type.

Hi,
I have created interface to load data from oracle table into oracle table.In target table we have attribute with clob data type. while loading data into clob field ODI gave below error. I use odi 10.1.3.6.0
java.lang.NumberFormatException: For input string: "4294967295"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
Let me know if anyone come across and resolved this kind of issue.
Thanks much,
Nishit Gajjar

Mr. Gajjar,
You didnt mention what KMs you are using ?
have a read of
Re: Facing issues while using BLOB
and
Load BLOB column in Oracle to Image column in MS SQL Server
Try again.
And can you please mark the Correct/Helpful points to the answers too.
Edited by: actdi on Jan 10, 2012 10:45 AM

Error while load data into Essbase using ODI

Hi ,
I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
File "<string>", line 79, in ?
com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
Thanks
Venu

Are you definitely running it against an agent where that path exists.
Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
Cheers
John
http://john-goodwin.blogspot.com/

Error while loading data into BW (BW as Target) using Data Services

Hello,
I'm trying to extract data from SQL Server 2012 and load into BW 7.3 using Data Services. Data Services shows that the job is finished successfully. But, when I go into BW, I'm seeing the below / attached error.
Error while accessing repository Violation of PRIMARY KEY constraint 'PK__AL_BW_RE_
Please let me know what this means and how to fix this. Not sure if I gave the sufficient information. Please let me know if you need any other information.
Thanks
Pradeep

Hi Pradeep,
Regarding your query please refer below SCN thread for the same issue:
SCN Thread:
FIM10 to BW 73- Violation of PRIMARY KEY -table AL_BW_REQUEST
Error in loading data from BOFC to BW using FIM 10.0
Thanks,
Daya

Error while loading data into 0pur_c03 using 2lis_02_scl

Hi,
While trying to load data into 0pur_c03 by using Data Source 2lis_02_scl from R/3 the error message "The material 100 does not exist or not active" is being displayed. I have loaded master data for 0Material and performed change Run also.Still the problem is not resolved.Please suggest in resolving this issue.
Regards,
Hari Prasad B.

I have the same problem in my system and i found that the material XXXXX had movements.....sales documents and more but in certain moment it material was deleted in R3 and it is not loaded into 0MATERIAL infoobject because is marked for deletion....
If you have this error must activate the load request manually and your infocube can hold the data without any problem.....
Regards

Dead lock error while updating data into cube

We have a scenario of daily truncate and upload of data into cube and volumes arrive @ 2 million per day.We have Parallel process setting (psa and data targets in parallel) in infopackage setting to speed up the data load process.This entire process runs thru process chain.
We are facing dead lock issue everyday.How to avoid this ?
In general dead lock occurs because of degenerated indexes if the volumes are very high. so my question is does deletion of Indexes of the cube everyday along with 'deletion of data target content' process help to avoiding dead lock ?
Also observed is updation of values into one infoobject is taking longer time approx 3 mins for each data packet.That infoobject is placed in dimension and defined it as line item as the volumes are very high for that specific object.
so this is over all scenario !!
two things :
1) will deletion of indexes and recreation help to avoid dead lock ?
2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
Regards.

hello,
1) will deletion of indexes and recreation help to avoid dead lock ?
Ans:
To avoid this problem, we need to drop the indexes of the cube before uploading the data.and rebuild the indexes...
Also,
just find out in SM12 which is the process which is causing lock.... Delete that.
find out the process in SM66 which is running for a very long time.Stop this process.
Check the transaction SM50 for the number of processes available in the system. If they are not adequate, you have to increase them with the help of basis team
2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
Ans:
Lie item dimension is one of the ways to improve data load as well as query performance by eliminationg the need for dimensin table. So while loading/reading, one less table to deal with..
Check in the transformation mapping of that chs, it any rouitne/formula is written.If so, this can lead to more time for processing that IO.
Storing mass data in InfoCubes at document level is generally not recommended because when data is loaded, a huge SID table is created for the document number line-item dimension.
check if your IO is similar to doc no...
Regards,
Dhanya

Error while loading data into hierarchy

Hi,
I tried loading the master data from flat file into a hierarchy but its giving me an error message as invalid entry and says hierarchy doesn't exist.Could anyone please guide me how to proceed.
Thanks,
Kuldeep.

Hi,
1. create a hierarchy, go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc.
2. Assuming it is a flat file load in csv format,selct upload method as IDOC,after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab
This will hopefully solve your problem.
Kind Regards,
Ray

Error while uploading data into cube

I am trying to upload data into my content cube but I got an error it says"
"Time conversion from 0CALDAY to 0FISCPER (fiscal year S1 ) failed with value 20040303"
I checked the data in the PSA it's there but the first record is not green light it has red light. Could you please give me some idea how to solve this problems.
Thank you in advance
sajita

If you don't know if you want to take over all settings (especially exchange rates may be critical) the problem is probably found in the fiscal year variant. So if you just take over the fiscal year variants.
If the problem remains you could check the following things:
In SPRO -> Global Settings -> Fiscal Year Variants (or similar) check:
Does a fiscal year variant S1 exist?
Is it time dependent? If yes, is it valid for Mar 3rd 2004?
If it is a self defined variant check if there is a period defined for March 3rd 2004.
Best regards
Dirk

Error while loading data into Customers InfoCube

Hi All,
I am receicing the following error while loading the data into the following InfoCube 0SD_C01.
The error I am receiving is "LIS Updating is Still Active".
I am also receiving error similar to "The data is being edited at the time of loading the data request".
Does anybody have encountered such a situation...
Please help me out.
Regards
YJ

Hi Dinesh and Paolo,
The links are very useful.
I went through the Transactions and found out that the Asynchronous Updating is going on for S001.
So what are the steps that I can take as a BW Consultant so that the data is loaded into BW.
Regards
YJ

Error while loading data from cube

while ia m trying to load into the infocube i am unable to load data into the infocube. it is getting an error as raise_exception in the short dump analysis. how to solve the problem if u know give me clear clarification.

Hi,
Can you check what is the difference in the PSA Data in the previous load and the latest load.
May be by that way you can find what is wrong in any fields if any chance. It may be the case that it would be giving you that error because of some data mismatch in the fields. And in the Short Dump analyse it completely there would be definitely something which will be evident of the error.
It may also very well be a data base table space issue as well.
Hope this helps,
Pradip Parmar

Runtime error while loading data into infocube

Hi all,
I am getting a runtime error while loading the transaction data into the InfoCube.
Exception name: CX_SY_GENERATE_SUBPOOL_FULL
Runtime error: GENERATE_SUBPOOL_DIR_FULL
Anyone has any idea about this error? Any help will be really helpful. Thanks in advance.
Regards,
Sathesh

Hi Sathesh,
Please provide more details for the problem.
You can go and check in ST22. Go through the Dump Analysis and Let us know.
Regards
Hemant Khemani

Error while loading Data into Essbase using ODI

Hi,
I am very new to ODI. I have installed ODI and working on Demo environment only. I havn't done any configuration. I am using Essbase Technology which is coming by default.
I have created one sample outline in Essbase and a text file to load data into essbase using ODI.
Following my text file.
Time     Market     Product     Scenario     Measures     Data
Jan     USA     Pepsi     Actual     Sales     222
I am getting the error. I have checked in Operator. It is giving at step 6 i.e. Integration SampleLoad data into essbase.
Here is the description.
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C3_C1 ""Time"",C5_C2 ""Market"",C2_C3 ""product"",C6_C4 ""Scenario"",C1_C5 ""Measures"",C4_C6 ""Data"" from "C$_0Demo_Demo_genData" where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
stmt.setFetchSize(srcFetchSize)
rs = stmt.executeQuery(sql)
#load the data
stats = pWriter.loadData(rs)
#close the database result set, connection
rs.close()
stmt.close()
Please help me to proceed further...

Hi John,
Here is the error message in execution tab....
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 20, in ?
java.sql.SQLException: Unexpected token: TIME in statement [select   C3_C1    ""Time]
     at org.hsqldb.jdbc.jdbcUtil.sqlException(jdbcUtil.java:67)
     at org.hsqldb.jdbc.jdbcStatement.fetchResult(jdbcStatement.java:1598)
     at org.hsqldb.jdbc.jdbcStatement.executeQuery(jdbcStatement.java:194)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx4.f$0(<string>:20)
     at org.python.pycode._pyx4.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
java.sql.SQLException: java.sql.SQLException: Unexpected token: TIME in statement [select   C3_C1    ""Time]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

Similar Messages

Maybe you are looking for