Error while loading data into SAP BW using BO Data Services......

Hello All,
I have a job to load data from SQL Server to SAP BW. I have followed the steps got from SAP wiki to do this.
1. I have created an RFC connection between two servers(SAP and BODS Job Server)
when I schedule and start the job immediately from the SAP BW, i get this error and it aborts the RFC connection....
"Error while executing the following command:  -sJO return code:238"
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Scheduler
Any help would be appreciated......
Thanks
Praveen...

Hi Praveen,
I want to know which version of BODS you are using for your development of ETL jobs?.
If it's BODS 12.2.2.2 then  you will get this type of problems frequently as in BODS 12.2.2.2 version , only two connection
is possible to create while having RFC between BW and BODS.
So , i suggest if you are using BODS 12.2.2.2 version  , then upgrade it with BODS 12.2.0.0 with Service PACK  3 and Fix Pack3 .
AS in BODS 12.2.3.3. we have option of having ten connection parallely at a time which helps in resolving this issues.
please let me know what is your BODS version and if you have upgraded your BODS to SP3 with FP3 , whether your problem is resolved or not..
All the best..!!
Thanks ,
Shandilya Saurav

Similar Messages

  • Error while loading hierarchies in sap bw

    Hi All,
    Iam getting the below error while loading hierarchy from flat file. While scheduling infopackage iam getting ....
    Error 8 when compiling the upload program: row 657, message: A newer version of data type /BIC/B0014446000 was...
    Can any one please resolve the issue....
    Regards,
    Kalyani

    It wasn't any issue with Hierarchy load actually. He might have done some changes to the InfoSource and activated it. But some time you need to refresh the complete tree or run \nrsa1 to refresh the widow otherwise it gives error.
    It shows to the system both the copies of the infosource new and the modified and so throws this error.
    This is also the case in case of time stamp error, where you do some changes to DS again and the time stamp in system metadata
    for this DS (re-activated) dosen't matches witht the one expected as it's creation time stamp preiously. So in this case also you need to re-activate and refresh/re-login into the system again.

  • Error while entering Timesheet into SAP

    Hi All,
    While entering Timesheet data into SAP through interface, we are facing an error as follows....
    "The attendance/absence type 00/INOR does not exist".
    Can anyone explain me about this error?
    How to resolve this error?
    Thanks and Regards
    Pavan

    Pavan
    Attendance type means
    general atttendance
    Over time attendance
    etc
    I belive you are trying to upload attendance infotype 2002 that infotype might have subtype which is not matching properly
    Please check
    Best Regards

  • Extracting Data from SAP ERP using BODI/Data Services 4.0

    HI,
    I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
    I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
    I am able to connect BODI to the ERP system and import the extractors metadata.
    The problem I am experiencing is that when I run job to extract the data I get the following error:
    Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
    How do I create the function? Or is the function a SAP standard function?
    SAP ERP system being used is: ECC6 EHP4
    User has SAP FULL and DEVELOPER authorizations.
    Any assistance would be appreciated.

    You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
    This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
    (emphasis added)
    Regards,
    Sean

  • HOW TO LOAD R/3 DATA INTO SAP BI USING PROCESS CHAINS?

    Hi,
    Can we load R/3 data into BI using process chains?... I loaded data from R/3 into Infocube using generic extraction using view... took 2 tables EBKN and EBAN and ceated view.
    In PSA I can find all the 2388 records but when I load into datatarget in transferred tab there are 2388 records but in added colum i could find only 2096.....
    I deleted the request and want to load through process chains....... but  how to do ?????? without flat file ...can we laod using process chains?
    I appreciate any inputs.......
    Regards,
    Prasanthi.

    did you even bother looking at the links in my previous posts???
    read the docs...try yourself...if you encounter specific issues, you can post them on the forum...
    if you're really expecting somebody to post a step by step for process chain, i think you can wait a long, long time...

  • Error while loading metadata in HPCM application using Import Staging table

    Hello All,
    I was loading metadata in HPCM using Import Staging table. I successfully uploaded Driver Definition metadata.
    However while loading "Driver Exception" metadata, I am not able to load it successfully. I have checked the HPCM logs but found nothing. I then checked the "Import Exception" table and found the following error message.
    ERROR_POPULATED_DIM_COLUMNS_DO_NOT_MATCH_STAGE_DEFINITIONCan anyone please help me with this.
    Regards,
    -SM

    It is a bug and there is a patch available.
    Oracle Support - "Bug 12905298 : INTERFACE FAILS TO INTEGRATE ON STEP "LOAD DATA INTO PLANNING"
    Patch = 12905298: INTERFACE FAILS TO INTEGRATE ON STEP "LOAD DATA INTO PLANNING"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while importing the tables from MySQL using the data source connection

    Hi,
    I am trying to import tables from MySQL into Powerpivot using the data source connection, if use the import using the Query option its working fine but not with the select list of table option.
    when i click on the select list of tables option, i get the below error after selecting all the tables to be imported:
    OLE DB or ODBC error.
    An error occurred while processing table 'XXXXXXXXXX'.
    The current operation was cancelled because another operation in the transaction failed.

    Hi Bharat17an,
    Please provide the detail information when create the MySQL connection in your PowerPivot model. Here is a good article regarding "how to Use MySQL and Microsoft PowerPivot Together" for your reference, please see:
    http://www.datamensional.com/2011/09/how-to-use-mysql-and-microsoft-powerpivot-together-2/
    If this issue still persists, please help to collection windows event log information. It maybe helpful for us to troubleshoot this issue.
    Regards,
    Elvis Long
    TechNet Community Support

  • Transformation Rule: Error while loading from PSA to ODS using DTP

    Hi Experts,
    I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
    "Runtime error while executing rule -> see long text     RSTRAN     301"
    On further looking at the long text:
    Diagnosis
        An error occurred while executing a transformation rule:
        The exact error message is:
        Overflow converting from ''
        The error was triggered at the following point in the program:
        GP4808B5A4QZRB6KTPVU57SZ98Z 3542
    System Response
        Processing the data record has been terminated.
    Procedure
          The following additional information is included in the higher-level
         node of the monitor:
         o   Transformation ID
         o   Data record number of the source record
         o   Number and name of the rule which produced the error
    Procedure for System Administration
    When looking at the detail:
    Error Location: Object Type    TRFN
    Error Location: Object Name    06BOK6W69BGQJR41BXXPE8EMPP00G6HF
    Error Location: Operation Type DIRECT
    Error Location: Operation Name
    Error Location: Operation ID   00177 0000
    Error Severity                 100
    Original Record: Segment       0001
    Original Record: Number        2
    Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
    Thanks & Regards,
    Raj

    Jerome,
    The same issue.
    Here are some fields which are different in terms of length when mapped in transformation rules
    ODS                    |Data Source
    PROD_CATEG     CHAR32           |Category_GUID      RAW 16
    CRM_QTYEXP     INT4          |EXPONENT      INT2
    CRM_EXCRAT     FLTP16          |EXCHG_RATE     Dec 9
    CRM_GWEIGH     QUAN 17, 3     |Gross_Weight     QUAN 15
    NWEIGH          QUAN 17, 3     |Net_Weight     QUAN 15
    CRMLREQDAT     DATS 8          |REQ_DLV_DATE     Dec 15
    The difference is either some dats field are mapped to decimal, or the char 32 field is mapped to raw 16 OR Calweek, Calmonth is mapped to Calday
    Both mostly all the ods field size is greater than the input source field.
    Thanks
    Raj

  • JCO Proxy Error while connecting xMII into SAP R/3 Server

    Hi All
    When we try connect out SAP xMII server to the SAP R/3 Server using JCo (JCO Interface), we are getting an error
    "Fatal Error: JCOProxy Error:Name or Password is incorrect, please re-enter"
    We have checked the userID and password for logging into the SAP R/3 System and it is all correct and we are also able to login with the same userID/password using SAPGui. All the other details like SAP Server, Client Instance is all correct.
    appreciate if someone can help resolving this.
    Thanks and Regards
    Biju Kumar

    Hi Biju,
    I have also experienced this error. We are using xMII 12.0.1 with SAP R/3 4.6B. Please make sure that your password is in lowercase without special characters. Also check the xMII-logs if there is some more information about the error.
    If nothing helps, delete the SAP server entry in Data Services and re-enter it. Maybe this makes it work. I found that either the password was different or the new entry helped.
    Regards
    Michael

  • Error while loading metadata into planning using ODI

    Hi John,
    While trying toload members into planning using ODI the following error occurred. Please suggest
    java.lang.Exception
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.h.y(h.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source)

    Hi John,
    While trying toload members into planning using ODI the following error occurred. Please suggest
    java.lang.Exception
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.h.y(h.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source)

  • Error while loading sdoapi into server

    hi,
    i tried to load the latest sdoapi into an oracle 9i server using
    loadjava -r -resolver "((* SCOTT) ((* PUBLIC))" -u scott/[email protected] -v d:\apps\JDeveloper\jdk\lib\sdoapi.zip
    i think that the follwing error causes the failing of the resolve process
    ORA-29545:badly formed class: at offset 429 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting
    a class-oracle.sql.Datum but encountered a initObj.
    at offset 464 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting a class-oracle.sql.Datum but encountered a init
    Obj.
    at offset 489 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting a class-oracle.sql.Datum but encountered a init
    Obj.
    at offset 706 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting a class-oracle.sql.Datum but encountered a init
    Obj.
    at offset 713 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting a class-oracle.sql.Datum but encountered a init
    Obj.
    another error is
    errors : class oracle/sdoapi/OraSpatialManager
    ORA-29534: Referenziertes Objekt SCOTT.oracle/sql/ARRAY konnte nicht aufgelwst werden
    can anyone help me? if you need the complete trace i can send it.
    regards matthias

    FYI - I don't know of anyone who has tried to load the api into the server.

  • Error while loading metada into HFM Application

    Can any one help me out from this stage in hfm.I am getting these errors frequently.Please send your comments on this .
    Metadata Scan started at 21:41:36
    PASS I - Analyzing Section Headers
    PASS II - Validating member names and hierarchies
    Scenario
    Error: Member defined but not referenced in the hierarchy
    Scenario
    ActualEntity
    Account
    Custom1
    Custom2
    Custom3
    Custom4
    Currency
    Scan ended at: 21:41:36
    Elapsed time: 00:00:00

    You have a scenario which was defined, but is not attached to anything in the hierarchy section. Using the Win32 metadata manager, open the scenario dimension, and in the list tab check the box that shows orphans. Once you see which member isn't attached to the hierarchy, drag it where you want it, save and load the file.
    --Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Error while loading data into BW using Datastage tool

    We are extracting data from external source and loading it into SAP BW using Ascential DataStage. Sometimes the job starts on the DataStage side but doesn't really run. I get the following error msg on the BW side:
    S:RSVAR:051 Error opening InfoSource file: ZTESTODS_TRANSACTION.TXT
    Please suggest.
    Thanks,
    RR

    Hi,
    ZTESTODS_TRANSACTION.TXT and ZTESTODS_TRANSACTION.MET are two files in the dsbwconnections directory on the datastage server. The error occurs when a process has a lock on the file.
    If you use PUSH or PULL then you won't see the problem.
    Best regards
    Niels

  • Error while load data into Essbase using ODI

    Hi ,
    I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
    File "<string>", line 79, in ?
    com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
    Thanks
    Venu

    Are you definitely running it against an agent where that path exists.
    Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Loading data into HANA DB (using hdbsql client) with Control file.

    Hi,
    I am working on a Project where the requirement is to load data from a csv file into HANA Database.
    I am using HDBSQL, command line client on a windows machine to upload the data into HANA DB on a linux server.
    I am able to successfully use the HDBSQL to export the file.
    I have the following questions w.r.t to Bulk uploading data from CSV:
    Where should the CSV file reside? Can this be in the windows machine or is it mandatory to have in the dropbox location.
    Where should the control file reside? Can this be in the windows machine or is it mandatory to have in the dropbox location.
    Where will the error file reside in case of errors?
    I am new to this and any help is much appreicated.
    Thanks,
    Shreesha

    Hi Shreesha,
    Where should the CSV file reside? Can this be in the windows machine or is it mandatory to have in the dropbox location.
    Where should the control file reside? Can this be in the windows machine or is it mandatory to have in the dropbox location.
    Where will the error file reside in case of errors?
    We need to create the DATA,CONTROL and ERROR folders on the linux server on which HANA is installed.( or a server accessible to SAP HANA server )
    Hence we need to SFTP the file to HANA server to further load into Table.
    Also have a look on the similar requirement on which i worked
    SAP HANA: Replicating Data into SAP HANA using HDBSQL
    Regards,
    Krishna Tangudu

Maybe you are looking for