Error while loading flat file into DSO
Hi
I am loading data from a flat file into a DSO. My fields in the flat file are Trans_Dt, (CHAR) Particulars (CHAR), Card_Name, (CHAR) Exps_Type, (CHAR)
Debit_Amount,Credit_Amount,***._Amt,Open_Bal_Check_Acnt, (CURR)
0Currency (CHAR)
In the proposal tab apart from the above mentioned fields 3 additional fields viz, field 10, field 11, and field 12 have come. How did these 3 additional fields come when I don't have any additional fields in my flat file? I've deleted these extra 3 fields though.
When I activate the DataSource it is getting activated but then I get the message 'Data structures were changed. Start transactions before hand'. What does this message mean?
When I hit the 'Read preview data' button it doesn't show me any data and gives me the error Missing reference to currency field / unit field for the fields Debit_Amount,Credit_Amount,***._Amt,Open_Bal_Check_Acnt
How do I create a reference field to the above mentioned fields?
Earlier I didn't have the 0Currency field in the flat file. But in my DSO while creating the key figures by default the 0Currency field also got created which is quite obvious. Now while activating the transformations I was getting a message that 'No source field for the field 0Currency'. Hence I had to create a new field in my flat file called 0Currency and load it with USD in all rows.
Please help me in loading this flat file into the DSO.
Thank you.
TR.
Hi guys,
Thanks a lot for your answers. with your help I could see the data in the 'Read preview data' and schedule the load. I did use all the Info objects in the info objects column of the data source to load the flat file.
The data is in PSA successfully without any issues. but when I executed the DTP it failed with errors.
Earlier there was no mapping from Currency field in source to the all the key figure fields in the target in the transformation. The mapping was only from Currency to 0CURRENCY but still the transformation got activated. As per your advise I mapped Currency field to the remaining Key Figure fields but then I am getting the error
'Source parameter CURRENCY is not being used'
Why is that so?
list of Errors after executing the DTP:
1. 'Record filtered because records with the same key contain errors'
Message:
Diagnosis: The data record was filtered out becoz data records with the same key have already been filtered out in the current step for other reasons and the current update is non-commutative (for example, MOVE). This means that data records cannot be exchanged on the basis of the semantic key.
System Response: The data record is filtered out; further processing is performed in accordance with the settings chosen for error handling.
Procedure: Check these data records and data records with the same key for errors and then update them.
Procedure for System administration
Can you please explain this error and how should I fix this error.
2. Exception input_not_numeric; see long text - ID RSTRAN
Diagnosis: An exception input_not_numeric was raised while executing function module RST_TOBJ_TO_DERIVED_TOBJ.
System Response
Processing the corresponding record has been terminated.
Procedure
To analyse the cause, set a break point in the program of the transformation at the call point of function module RST_TOBJ_TO_DERIVED_TOBJ. Simulate the data transfer process to investigate the cause.
Procedure for System Administration
What does this error mean? How do I set a breakpoint in the program to fix this error inorder to load the data?
What does Procedure for System Administration mean?
Please advise.
Thank you.
TR.
Similar Messages
-
Getting error while loading flat file into table.
I am using ODI 11 and i am trying to load data in oracle database table using source as flat .txt file .
When i execute the interface , i am getting below errors.
ODI-1217: Session INF_FILE2TAB (31022) fails with return code 7000.
ODI-1226: Step INF_FILE2TAB fails after 1 attempt(s).
ODI-1240: Flow INF_FILE2TAB fails while performing a Loading operation. This flow loads target table PARTNER.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2224)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2168)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:333)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-06564: object DAT_DIR does not exist
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Please let me know pointers on this.Yes,after your sugestion i have created ODI agent and tested the file system connection in topology. It was connected successfully.
but when i tried again for file to table load. Again got below error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2224)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2168)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:333)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-06564: object DAT_DIR does not exist
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Please suggest. -
Getting error while loading Flat File
Hello All,
I am getting error while loading flat file. Flat file is a CSV file.
Value ',,,,,,,,' of characteristic 0DATE is not a number with 000008 spaces
Data seprator |
Escape sign ;
It has 23708 entries , it s loading successfully till 23 665 entries
Besides when checked in PSA
for record having entries >23667 has calender day as ,,,,,, where as rest entries are having date
Besides when i checked in Flat file ,the total number of rows is 23,667 is there but i wonder why it has got 23,708 in
RSMO
Could you please let me know how to correct.
regards
pathHi,
For date column you should maintain YYYYMMDD formate Eg: 20090601, kepp cursor on date column and right click and Formate >Custome>make it 00000000 then save teh file as .CSV . First type values on column and do like this formate and save it and without opening it load it. Once you open it you losw 00000000 formate you need to give again the same formate.
Settings in Infopackage:
Data Format = CSV
Data Separator = ,
Escape Sign = ;
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6567e07211d2acb80000e829fbfe/content.htm
Thanks
Reddy -
Error while loading XML files into scott user
Hi All,
I'm new to xml files. I need to load xml files into database through OWB.
I have xml file in my local machine & am trying to load into table PO of Scott. Scott is registered as repository user.
Followed same steps as specified in userguide.
But, when executing the procedure ( in two ways one as just table name, and other as user.table name) it is showing the below error:
Procedure is:(1)--with username.tablename
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">scott.PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object SCOTT.PO.
Base exception: ORA-01031: insufficient privileges
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at "SCOTT.SAMPLE1", line 3
ORA-06512: at line 1
Procedure is:(2) with out username
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object PO.
Base exception: ORA-00942: table or view does not exist
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at line 2
xml file:
<ROWSET>
<ROW>
<ID>100</ID>
<ORDER_DATE>2000.12.20</ORDER_DATE>
<SHIPTO_NAME>Adrian Howard</SHIPTO_NAME>
<SHIPTO_STREET>500 Marine World Parkway</SHIPTO_STREET>
<SHIPTO_CITY>Redwood City</SHIPTO_CITY>
<SHIPTO_STATE>CA</SHIPTO_STATE>
<SHIPTO_ZIP>94065</SHIPTO_ZIP>
</ROW>
</ROWSET>
Note: Everything works fine if I create PO table in OWBSYS user and execute the procedurein OWBSYS user. OWBSYS.PO table will be loaded.
What privileges are missing, what shouldI do if I want to execute the procedure from scott user and load the table of scott.
Thanks in advance for the help.
Regards,
JoshnaHi Joshna,
Please follow below steps to load xml file to oracle database.
1.First connect to owb (Design Center) through your repository owner user (ex : REP_OWNER).
2. Import WB_XML_LOAD procedure . and exit to repository owner.
3. connect to owb design center through your repository user (ex : REP_USER)
Create New mapping and drag one Constant Operator and create one attribute, paste / edit following code
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>E:\SOURCE\emp.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target truncateFirst = "FALSE" dateFormat="yyyy.MM.dd">rep_user.emp</target>'||
'</targets>'||
'</OWBXMLRuntime>'
4. Drag pre mapping operator and select WB_XML_LOAD procedure
5. Connect Constant Operator attribute to pre mapping operator.
6. Drag two dummy tables and connect source to target. (ex : drag t1 (table) tab two times and connect.
7. Validate and deploy the mapping.
8. grant necessary grant command to rep_owner user to rep_user user.
(Note : target truncateFirst = "FALSE" by default truncate the table. So you have to give grant privileges
To rep_user , select ,insert, delete privileges.
9. Execute the mapping , and check EMP table. (Note : before loading EMP table delete all records ).
10 . If you want more description please go through the below link
http://download.oracle.com/docs/html/A95931_01/apf.htm
Regards
Venkat -
Error while loading Flat file to the table (ORA-00936: missing expression)
lat file Hi Gurus
Receiving the following error while trying to load of flat file to the database :
ODI-1228: Task test_file_load (Integration) fails on the target ORACLE connection DEMO_STAGE.
Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
The file which I have tried to load is : SRC_SALES_PERSON and teh table structure is
CREATE table "TRG_SALES_PERSON"(
"SALES_PERSON_ID" NUMBER(8,0) NOT NULL,
"FIRST_NAME" VARCHAR2(80),
"LAST_NAME" VARCHAR2(80),
"DATE_HIRED" VARCHAR2(80),
"DATE_UPDATED" DATE NOT NULL)
Knowledge module used are
LKM File to SQL
IKM SQL Incremental Update
We rae using ODI 11g R2 ...
Thanks and reallty appreciate any help in thsi regard.HI there,
I am facing the same issue while loading data from SRC_SALES_PERSON(flat file) to TRG_CUSTOMER.
I dont see any errors in the steps however the data is not laoded finally. Here are the sql commands
**On source**
select ID C11_ID,
LASTNAME C9_LASTNAME
from TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=SRC_SALES_PERSONSNP$CRLOAD_FILE=D:\Pratima\Softwares\ODI\ofm_odi_companion_generic_11.1.1.5.1_disk1_1of1[1]\demo\oracledi-demo\oracledi\demo\file/SRC_SALES_PERSON.txtSNP$CRFILE_FORMAT=FSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=IDSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLINE_OFFSET=1SNP$CRLENGTH=11SNP$CRPRECISION=11SNP$CRACTION_ON_ERROR=0SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FIRSTNAMESNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=12SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=LASTNAMESNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=62SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=DATE1SNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=112SNP$CRLENGTH=20SNP$CRPRECISION=20SNP$CR$$SNPS_END_KEY*/
On Target
insert into STAGING.C$_0TRG_CUSTOMER
C11_ID,
C9_LASTNAME
values
:C11_ID,
:C9_LASTNAME
The actual code at source fails however the step is in green.
Thanks in Advance,
Pratima -
Runtime Error while loading Flat file in to ODS
Hi Friends,
I have 11 records in flatfile and I am loading it from PC. when I see in preview I can see.
But when I load it ,it gives me short dump. request status is in amber..
Please help me as this is urgent support issue.
The ABAP Runtime Error is
Runtime Error CALL_FUNCTION_CONFLICT_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Date and Time 02.01.2008 13:55:38
What happened?
Error in ABAP application program.
The current ABAP program "GP44UKXZB8WE74CAKI38CZ0B586" had to be terminated
because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A function module was called incorrectly.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.Hi Sudhakar,
This seems to be a type conflict error. It occurs when you assign for example a char field to a numc field. So, I suggest you check your mappings and see if there is any type mismatch in the info objects. Hope it helps.
Thanks and Regards
Subray Hegde -
Risk factors while loading flat files
HI,
CAn anybody tell me what are risk factors while loading
flat files....
Thanks in advance,
regards,
RagsRisks:
1) If flat-file is created manually
- users may forget columns, specifically UNIT and
CURRENCY.
- Keyfigures my be presented in thousands one time
and in single dollars the other time.
- Flat-file may be delivered too late.
- Automatic scheduling is difficult if flat-file
comes from client station. You even can't do it
with a process chain.
- Naming conventions (capitals, leading zeroes,
trailing spaces, special characters)
- Master data conversion
2) If flat-file is created automatically (from legacy
system):
- Data may arrive too late
- Data file (if loaded from server) requires a
connection to the external disk - security risk.
- (Master) Data conversion
Note: In the past I had trouble with uploading flat-files from a network-drive. It sometimes happened that the flatfile was only partly imported and that no errors where reported. When loading data from my local C-drive I never had this problem.
My advise is to upload a flat-file into an ODS before using the data further in BW. In the ODS you can add a date to mark the loading data. If the loading to an ODS is ok then there is a much bigger change that you will not get problems further in the data-stream. Make sure that the key-user validates the data in the ODS before using it any further. It pays off to create one or two special queries on this ODS to enable testing of the data. -
Error while loading java file in Oracle
Hi,
I am facing error while loading java class into oracle . Can you please help
-bash-3.2$ cd /export/home/sacuser/
-bash-3.2$ loadjava -user sacuserdb/sacuserdb@BLM - resolve Oracle_Validator/src/com/nec/blm/oracle/validator/Validate.java
unrecognized or badly formed option -
loadjava: Usage: loadjava [-definer] [-encoding encoding] [-force] [-genmissing] [-genmissingjar jar] [-grant grant s] [-help] [-nousage] [-noverify] [-oci8] [-order] [-resolve] [-resolver resolver] [-schema schema] [-synonym] [-th in] [-tableschema schema] [-user user/password@database] [-verbose] classes..jars..resources..properties...
-bash-3.2$ loadjava -user sacuserdb/sacuserdb@BLM -resolve Oracle_Validator/src/com/nec/blm/oracle/validator/Validate.java
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x0
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at oracle.jdbc.driver.T2CConnection.t2cCreateState(Native Method)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:346)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:413)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:131)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:77)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:752)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
- locked <0xf5fdc448> (a java.lang.Class)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
- locked <0xf5fdc448> (a java.lang.Class)
at oracle.aurora.server.tools.loadjava.DatabaseOptions.getConnection(DatabaseOptions.java:180)
at oracle.aurora.server.tools.loadjava.DatabaseOptions.connect(DatabaseOptions.java:123)
at oracle.aurora.server.tools.loadjava.LoadJavaState.getConnection(LoadJavaState.java:409)
at oracle.aurora.server.tools.loadjava.LoadJavaState.getOldMD5(LoadJavaState.java:696)
at oracle.aurora.server.tools.loadjava.ClientSchemaObject.getOldMD5(ClientSchemaObject.java:52)
at oracle.aurora.server.tools.loadjava.SchemaObject.doCreate(SchemaObject.java:172)
at oracle.aurora.server.tools.loadjava.SchemaObject.process1(SchemaObject.java:215)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:532)
at oracle.aurora.server.tools.loadjava.LoadJava.addSource(LoadJava.java:574)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:439)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:380)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:349)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:652)
at oracle.aurora.server.tools.loadjava.LoadJava.processDeferredFiles(LoadJava.java:617)
at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:818)
at oracle.aurora.server.tools.loadjava.LoadJava.command(LoadJava.java:251)
at oracle.aurora.server.tools.loadjava.LoadJavaMain.run(LoadJavaMain.java:103)
at oracle.aurora.server.tools.loadjava.LoadJavaMain.main(LoadJavaMain.java:28)
Dynamic libraries:
0x8050000 /opt/oracle/product/10g/jdk/jre/bin/java
0xfef80000 /lib/libthread.so.1
0xfef40000 /lib/libdl.so.1
0xfee10000 /lib/libc.so.1
0xfea00000 /opt/oracle/product/10g/jdk/jre/lib/i386/client/libjvm.so
0xfedd0000 /usr/lib/libCrun.so.1
0xfedb0000 /lib/libsocket.so.1
0xfe960000 /lib/libnsl.so.1
0xfed90000 /lib/libm.so.1
0xfedc0000 /usr/lib/libsched.so.1
0xfe900000 /lib/libm.so.2
0xfed40000 /lib/libscf.so.1
0xfe8e0000 /lib/libdoor.so.1
0xfe8b0000 /lib/libuutil.so.1
0xfe890000 /lib/libgen.so.1
0xfe870000 /lib/libmd.so.1
0xfe850000 /lib/libmp.so.2
0xfe830000 /opt/oracle/product/10g/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe3d0000 /opt/oracle/product/10g/jdk/jre/lib/i386/libverify.so
0xfe3a0000 /opt/oracle/product/10g/jdk/jre/lib/i386/libjava.so
0xfe380000 /opt/oracle/product/10g/jdk/jre/lib/i386/libzip.so
0xf9e80000 /opt/oracle/product/10g/lib32/libocijdbc10.so
0xf0e00000 /opt/oracle/product/10g/lib32/libclntsh.so.10.1
0xf0c60000 /opt/oracle/product/10g/lib32/libnnz10.so
0xf9e60000 /lib/libkstat.so.1
0xf9e30000 /lib/libaio.so.1
0xf1b60000 /lib/librt.so.1
Heap at VM Abort:
Heap
def new generation total 576K, used 237K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 45% used [0xf1e00000, 0xf1e3a058, 0xf1e80000)
from space 64K, 8% used [0xf1e90000, 0xf1e915c0, 0xf1ea0000)
to space 64K, 0% used [0xf1e80000, 0xf1e80000, 0xf1e90000)
tenured generation total 1408K, used 204K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 14% used [0xf22e0000, 0xf23130f0, 0xf2313200, 0xf2440000)
compacting perm gen total 4096K, used 2662K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 65% used [0xf5e00000, 0xf6099a38, 0xf6099c00, 0xf6200000)
Local Time = Mon Jun 17 16:29:08 2013
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
# An error report file has been saved as hs_err_pid27805.log.
# Please refer to the file for further information.
Abort (core dumped)Please try to compile your java source file with jdk avaiable in ORACLE_HOME\jdk\bin\javac.
load the compiled class file in oracle DB using loadjava utility.
loadjava -user scott/tiger javafile.class -
FDF error while loading xml file onto PDF
Need some help here folks. Im getting a FDF error while loading some value into pdf form. It not happening all the time, 1 out of 60 times with the same xml file onto a new pdf form. Anyone know why this happening. Is there some technical support i can purchase to get this resolved.
9.1 and 9.3.4
Date: Fri, 5 Aug 2011 00:56:19 -0600
From: [email protected]
To: [email protected]
Subject: FDF error while loading xml file onto PDF
Could you let me know which version of Adobe Reader are you using?
> -
Error while loading WSDL File in Eclipse
Hi Experts
We are getting the following Error while Loading WSDL File in Eclipse.
IWAB0399E Error in generating Java from WSDL: WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.:
Please advice how to resolve it.
Regards
PrashantIt seems that your WSDL is not well defined, you need to test your wsdl via WS-I compliance in order to check if the wsdl is well created, you can do this via soapui, just create a new project, import the wsdl file or set the URL, left click in the project and select check WS-I compliance, this tool will test your wsdl and gives you a detailed report of what might be the problem.
-
Caller-70 Error while loading master data into infoobject
hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
RakeshHi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj -
(409) Conflict Error while uploading the file into Sharepoint library
Getting the below error while uploading the file into Sharepoint library.
(409) Conflict. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.File.SaveBinary(ClientContext context, String serverRelativeUrl,
Stream stream, String etag, Boolean overwriteIfExists
I have used the below code:
ClientOM.File.SaveBinaryDirect(clientContext, "/Shared%20Documents/NewDocument.pptx", memoryStream, true);
Thanks in advance.May be issue is with path.
https://server/ should be there instead of
subsite path(https://server/path/path)
in the client context
Check the below link
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/fbb38b10-1127-48a6-a65f-0301edd766c4/the-remote-server-returned-an-error-409-conflict-error-while-uploading-files-to-sharepoint?forum=sharepointdevelopmentlegacy -
Uregnt - How to Load Flat File into BW-BPS using Web Browser
Hello,
We have followed the 'How to Load Flat File into BW-BPS using Web Browser' guide to build BSP web front-end to upload flat file. Everything works great but we have a requirement to populate the Planning Area Variables based on BSP drop down list with values. Does anyone know how to do this? We have the BSP coded with drop down list all we need to do now is populate variables. We can populate the variables through the planning level (hardcoded) but we need to populate them through the web interface.
Thanks,
GaryHello Gary,
We have acheived the desired result by not too a clean method but it works for us.
What we have done is, we have the link to load file in a page where the variables can be input. The user would then have the option to choose the link to load a file for the layout in that page.
By entering the variable values in the page, we are able to read the variables for the file input directly in the load program.
Maybe this approach might help.
Sunil -
Load flat file into oracle with SQL Loader
Hi All,
Oracle 9i
I want to load flat file into oracle with the help of sqlloader but I want to skip some columns from flat file.
Can anyone tell me how can we skip column from flat file , I can’t open flat file into excel as CSV due to large volume
Does anyone has any solution for the same.
Umesh GoelFiller can be use when we want to skip database table column or we want to put null in database table column
but if we have 10 column in flat file and we want to load 1,2,5,7 number column from flat file
then I think filler will not work
If yes then plz let me know.
thx
UG -
How to load flat file into BW BPS
hi,
how to load flat file into BW BPS ?Have a read through this;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20load%20a%20flat%20file%20into%20bw-bps%20using%20a%20web%20browser.pdf
Maybe you are looking for
-
Syncing iphone and ipod to new imac
I have a new imac (bought yesterday) and when i hookup my ipod and iphone it tells me that it will erase the device and load my music off the imac. No music on the imac yet! What am I doing wrong
-
No Data to display in Application failure report for a specific Application
Hi , For a specific application,Application failure report showing no data to display but for the same application other reports shows value. Application failure reports seems to work fine for some other application except few.Need to know the root c
-
Flash CS4 - how to create event flow from children to parents?
In my opinion natural event flow direction is from children to its parants. E.g. when in dialog box buttons are pressed it is natural to inform only this dialog box about these actions. When dialog box can't handle particular event then passes it to
-
Purchase requisition workflow - reset release via BSP and BAPI
Hello, We have a small workflow to release purchase requisition. A mail is send to the approver. The approver opens an BSP application to release or refuse the PR. The approval works well. The rejection doesn't work well. I use the BAPI_REQUISITION_R
-
Hi all.. Is there any standard program which displays the output in digramatic / flow chart format ? Regards, K.Tharani.