Error while loading Masterdata Txt using process chains

Hi Guru's
I am loading the masterdata texts for infoobject 0material, i am getting the following error:
"0MATERIAL : Data record 24 ('1215619 E '): version '1215619 ' is not valid "
Points assured.
Thanks in advance.
Peddinti

Hi Jr,
The data i am loading is a content data.i got the same error for all the records of 0Material info object.
regds,
Zakir Peddinti

Similar Messages

GETWA_NOT_ASSIGNED error while running abap prog in process chain

Hi.
I am getting a runtime error GETWA_NOT_ASSIGNED while running an ABAP program in process chain.
But when i execute pro in SE38 , it's not giving any error.
Please any one can suggets what will be error.

Hi,
i also used to get error for a program executed through process chain but when it is executed in se38 it used to work... that is because my program try to access a application server folder and reads the file from there... the authorisation to this is not proper through process chain ..... once authorisation to the folder was given properly .. i am able to run...
Such things can happen in your case also... Try to analyse the dump in st22.... what happened ...
Regards
vamsi

Error While loading into BW using infoPackage

Hi All,
While following directions posted at the following wiki page https://wiki.sdn.sap.com/wiki/display/BOBJ/ConfiguretheLoadJobinBW%28DS+3.2%29,
we get an error while loading data into BW using infoPackage via Data services 3.2
In SAP BI side Error says :"Error while executing the following command: -sJO return code:220"
On DS side for the RFC server log we get the error" Error while executing the following command -sJOB_SQL_TO_DBI -Ubbu -P;(encrypted password) -A (encryted information) -VMODE=F"
Issue is still open with support as we still cannot excute the job from infopackage. it is succesfully executed from designer, admin console, batch file.
Any insights/help would be appreciated.
Thanks.
Edited by: rana_accn on Jan 26, 2010 6:48 PM

Sure I will.
One thing we have noticed is that in the server_eventlog parameter for the log line "Starting job with command line parameters are different"
When job is executed from DS side parameters -Ct -Cm -Ca -Cj -Cp -S -N -Q -U -P -G -r -T -Locale are used
When job is executed from BW side parameters -Ct -Cm -Ca -Cj -Cp -s -N -Q are used
Also when the job is executed from BW, log files start getting created but then trace and error file show an error that cannot open database - and that points to DSCentral repository.This repository is not even mapped to the job server and the job has been exported from the correct repository as command line execution of the job works perfectly fine.
Thnx
Just an update we were not able to figure out why this happened in the existing environment. One reason given was that somehow the commands which were being executed from BW side were getting corrupted. We had to build a new environment and this is no longer an issue in the new environment, as now all jobs can be executed from BW. Only difference between the 2 environments was we are now on 12.2.1.3 while earlier we were on 12.2.0.0.
Edited by: rana_accn on Mar 23, 2010 10:21 PM
Edited by: rana_accn on Apr 29, 2010 9:46 PM

TSV_TNEW_PAGE_ALLOC_FAILED error while loading the DATA using DTP

Hi,
While loading the data using DTP for 2 DSO's we are gettig the error
TSV_TNEW_PAGE_ALLOC_FAILED
can any one kindly help me out regarding the same.
Thank You,
Poornima.

Hi Soundarya,
Thanks a lot for the reply. But i found that its running fine in development, where as coming to quality its throwing an error. These happened for Two DSO's. In both the transformations i have identified that the Transformation names are different from Development and Quality..
There are no routines written for them and no select statements have been used
Can you please suggest me regarding the same.
Edited by: Poornima Gayatri on Mar 22, 2010 7:00 AM

Selectively deleting load from ODS using Process Chain

Hi All,
I have a requirement in which I have to delete the last load of the current month if any and leave the load of the last month untouched which has to be done using process chain.
I will try to elaborate the condition required like say we have a data for June in the ODS already (date 10) and when the load for July will come it will not touch the June data but on 2 July the load of first July will be deleted without touching the load from June 10. (The PC will run for the first 10 days of the month).
How can this be implemented, There seems to be some FM for this but are there any other method by which the same can be implemented without much use of ABAP.
Any relevant suggestion would be awarded points
Regards,
Samved

Hi Bhanu,
Thanks for the reply.
I tried to generate the program but that can be used for selective deletion from the ODS i think soo.
But my requirement is basically to delete the complete request from the ODS and not any selective deletion and at the same time I cannot use the complete deletion option as that will delete the request from the last month also.
Are there any optioin at the level of Info package which can be used for these type of deletion.
Regards,
Samved

Issue while loading Master Data through Process Chain in Production

Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
Bhanumathi

Hi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan

Lock Problem while Broadcasting multiple reports using process chains

Hi All,
I am trying to broadcast 10 reports using the process chains using the program for RSRD_START and variants created in the Broadcaster..the Program jobs start fine.But I am facing the error that the RSRA_CA_LOG table is getting locked while trying to broadcast the Reports..Can any help me on how to run the jobs without the locking problem..Suggestions please.
Thanks,
Mike.

Hi,
Thanks for the Inputs and the SAP Notes.
I am trying to broadcast the Reports from the the Bex Analyer and getting this ock error and not the workbooks.
I am also trying to Broadcast the Workbooks also, but could not find the options to Broadcast them. we are in SAP -BW3.5 SP 12, Is it possible to broadcast the workbooks in this Patch level..or do we need to upgrade to achieve this.If so...can any one provide me the proceedure to Broadcast the Workbooks.
Thanks,
Mike.

Error While Deleting cube Contents in Process Chain

Hi All ,
   I am getting a error when i am trying to delete the contents of two cubes in a Process Chain . The data of one cube is getting successfully deleted but while deleting the second one it results in a error.
Following are the messages :
1>Database table /BIC/FZCFEXP01 was deleted and recreated
2>Database table /BIC/EZCFEXP01 was deleted and recreated
3>Database table /BIC/FZCFEXP02 was deleted and recreated
4>Database table /BIC/EZCFEXP02 was deleted and recreated
5>Content Of Data Target ZCFEXP01 Successfully Deleted
6>Content Of Data Target ZCFEXP01 Successfully Deleted
7>System error: RSDU_DATA_EXISTS_TABLE_DB6/ DB6
8>Drop Cube Failed In Data Target ZCFEXP02
Can anyone Help ??
Sam
Any pointers . Help is highly appreciated.
Edited by: Samir Bihari on May 14, 2009 8:54 AM
Edited by: Samir Bihari on May 14, 2009 8:55 AM

Hi,
I'm not sure for this issue but it may relate to SP issue...
jst chk this notes:
Note 385293
Note 987754
rgds,

Error while loading Masterdat attributes and text in sap BI 7.0

Hi Guys
Any one help me....Plz
I am new to sap BI, in this my first task and it is loading master data attributes and text into datatargets,I did it in SAP BW 3.5,
It is ok
But i got error in BI 7.0
The error is while loading master data attributes and text in master data targest(using insert charcterstic as a infoprovider)every thing is OK up to infopackage creation step,
Andthe data loaded properly into PSA,
But not into Data targets(i mean here data is not load into datatargets)
After i create infopackage
I created DTP wit settings
Extraction Mode:full
Error handlig: Valid records update,no Reporting(request red)
and i click on activate and on Execute push button
error occurred when i click on "Adminstrative data targets " icon
And the error shows in DTP REQUEST 108 Screen
and it is
**RedColour: updating attributes for infoobject smid_ml1:8->0 Data Records**
**Redcolour: end of master data update**
**Redcolour Message for datarecords saved request is red acc to configuration**
Plese guys let me know this error and give your view
Regards
Venkat
SAP BI consultant

@murali
I click on errorstack push button in DTP error screen But it is not but psa error stack right?
I c'nt get u could plese clear it?
And i also tried on error handling :valid records ...green But no use same error occur
But here i am not using cube to reactive again i send it to you mail my problem as screen shot
Thank u 2 all for ur replies but my problekm is not solved yer

Error while loading java program using loadjava

Hi
I have oracle 8.1.7 in NT server. When I try to load a java program with load java it gives me the error like this
Error while resolving class EchoInput
ORA-00904: invalid column name
loadjava: 1 errors
Why this is happening. How can I resolve this. Any help is appreciated
Thanks
Santhosh

You need to install teh jserver component.
have your dba review this and run all java enabling scripts.
look for it in the doc as initjvm.sql.

Error while loading velocity template using ear file (weblogic 8.1,SP5)

Hi,
In one of our j2ee applications we have a web application and an EJB application.
Web application uses velocity(1.2).
Application server is weblogic 8.1 with sp5.
If web app and ejb app are deployed separately, web app is able to load templates properly but if we make an ear file bundling web app and ejb app, we get following error at the time when application tries to load even the first velocity template.
org.apache.velocity.exception.ResourceNotFoundException: Unable to find resource 'login.vt'
     at org.apache.velocity.runtime.resource.ResourceManager.getResource(ResourceManager.java:438)
     at org.apache.velocity.runtime.RuntimeInstance.getTemplate(RuntimeInstance.java:736)
     at org.apache.velocity.runtime.RuntimeInstance.getTemplate(RuntimeInstance.java:718)
     at org.apache.velocity.runtime.RuntimeSingleton.getTemplate(RuntimeSingleton.java:337)
     at org.apache.velocity.servlet.VelocityServlet.getTemplate(VelocityServlet.java:499)
     at com.nfsmith.servlet.Controller.handleRequest(Controller.java:377)
     at org.apache.velocity.servlet.VelocityServlet.doRequest(VelocityServlet.java:331)
     at org.apache.velocity.servlet.VelocityServlet.doGet(VelocityServlet.java:292)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6981)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
We have tried to configure and use all the resource loader for velocity engine(FileResourceLoader, ClasspathResourceLoader , JarResourceLoader etc.) but noting is working.
I have tried keeping all the templates under WEB-INF\classes dir. This does not work.
I have even tried keeping all the templates in a separate jar file and kept the same under APP-INF/lib and bundled the same in ear file, even this does'nt work either.
Should I create a rar file archive or is there any other way to achieve this?
Appreciate your responses.
Jaspal

Please repost this in the WebLogic Portal forum:
WebLogic Portal

Error while loading external data using Business Content

Hi,
I am new to BW and I'm stuck up with this problem.
I'm trying to load data from external file using business content cube(0PUR_C01)and infosources(2LIS_02_ITM/S012/SCL).
I first installed the above mentioned cube and data sources.
Then I activated the update rules and transfer rules, without any changes.(I don't know what changes might be required!)
Monitor is showing successful load but the cube has 0 enteries.
Even the simulation of update is showing data in the data target.
Can someone please guide me through this ?
Its really urgent....
Thank you all in advance.

Hi Sharmistha,
Welcome to SDN !! Does your monitor shows any records extracted till PSA ? Go to the details tab -> processing and click on each node to check what monitor shows.
Hope it helps.
Thx,
Soumya

Error while loading xml files using JDBC

Hi,
I am trying to load xml files into an xmltype table using JDBC calls and am getting this error for some files
LPX-00200: could not convert from encoding UTF-8 to UCS2
The xml files and our database are both UTF-8 encoded. The version of oracle that we have here is 9.2.0.6
Any suggestions in this matter will be greatly appreciated.
Thanks,
Uma

I also experienced this problem and unfortunately this solution didn't work for me given that the tag you suggested was already on the XML file.

Data load Error using Process chain

Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
Param

Hi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep

Flat file data loading error using process chain

Hi SAP Experts,
I am having a problem loading the flat file data to the cube using process chain. The issue is that when i run the process chain it fails giving the message " Date format error, please enter the date in the format _.yyyy" . I am using " 0calmonth in the datasource" . Strange is that when i manually execute the infopackage, i dont get any errors and am able to load the same file successfully to the dso and the cube. Is there any special setting for the process chain that i am missing?
The date format in the flat file is mm/yyyy. I have tried all the options i could including recreating the datasource and invain dont see any success so far. please help me solving this problem as we r in the middle of testing cycle.
Thanking you all for your quick response and support all the time.
Kind Regards,
Sanjeev

Hi Sanjeev,
I believe you are opening the .csv file again after saving it. In this case the initial 0 in single digit month (say 02/2010) is getting changed to 2/2010 and the resulting file is not readable to the system. Just do not open the file after you have entered data in the .csv file and saved and closed it. If required, open the file in notepad, but not in excel in case you want to re-check the data.
Hope this helps.
regards,
biplab

Error while loading Masterdata Txt using process chains

Similar Messages

Maybe you are looking for