Error while loading Purchasing Cube.

Hi All,
I am loading the data to Purchasing Group Cube "0PUR_C04" with the data source 2LIS_02_SCL. The laod fails saying that "The material MB0214363L does not exist or is not activated" When I checked the same material in R/3 I could see it as the deleted material. I am unable to load the data in BI even when in Error Handling I select "Update valid records". Please guide me in that, its very urgent. I will assign points.
Thanks and Regards,
Sangini.

Select the option load even if master does not exists in the InfoPackage
OR
Load the master data for material and activate it
Now reload the transaction data.

Similar Messages

Error while Loading info cube

Hi all,
I am getting error while i am loading from ODS to InfoCube.I have extracted data from CRM system to ODS.when i am loading from ODS to infocube i am getting Error as :Value 00000000 of charecteristic 0DATE is not Plausible.
Regards,
kals

You can use conversion routine for your field 0pstng_date.
The conversion routine which can solve ur prob. Try RSDAT conversion routine.
You have any variable for 0DATE , if so I think its format is YYYYMMDD
, give 99991231 instead of 99993112
Edited by: Prasad B on Aug 21, 2008 8:32 PM

Error while loading a Cube in BW - "Waiting for Semaphore"

Hello Experts:
I seem to be having a frequent problem while doing a Delta load from BW (3.5) cube to exactly similar cube in BI 7.0.
The load is done daily via a Process Chain. Before doing the Delta load, I also have a step to DELET Index from the
cube in BI. The Delta loads have been successful but frequently they take about 7 or 8 hours to load. The number of
records are not many 80,000 to 140,000 records range. There have been successful loads for similar range withing
7 or 8 minutes. However, when it gets hung up it takes 7 or 8 hours.
Looks like it is a Lock happening in 3.5 BW system. Tcode SM12 shows that it is locked and then in T. Code SM66, it
shows that it is hun for resources..... The message inicated is "Waiting for Semaphore". After about 7 hours, the load
automatically happens.
This is causing issues becuase the upward data loads don't happen and Users can not access the data until late afternoon
for their planning in BPC.
Is there a way this error or Waiting for Semaphore be avoided or time is reduced....? How can I achieve this? Any
fne tuning tricks anyone can suggest please......!!
Thanks a lot in advance.

Thanks to both of you.... ppreciate the feedback. I guess, I will have to wait for the situation to arise again as today's delta went normally. I will see if this happens again. I am not sure whether the Semaphore number is same as the "Work Process Number" in SM66 (which was 3 in my case) or is it the Process ID (which is 22872082 in my case).
If I go to SM50, I shoudl find either the Process ID then.
Would I be searching for the OSS notes corresponding to Process ID (in this case 22872082...? or would it for sempahore number (if it is different .... as I mentioned 3 in my case..?
Could you please clarify which is Semaphore number and if it is same as the process ID I am talking about so that I can search for the right OSS notes.
Also, finding all this will only tell me why it hung.... but is there a way we can make it kick off and not get stuck or I have to wait it out until the resources get released.....? Which in my case then would stil be a wait for 6/7 hours!!
Apreciate your feedback.
Best..... Lee

Error while loading to Cube

Hi
i am loading data from r/3 to dso and then to cube. data loaded fine till dso. when i am trying to load data from dso to infocube, it is giving short dump.
the error is
you attempted to assing field to type field symbol but the field does not have required type
adapt the type of field symbol to the type of the field or use an untyped field symbol or use casting addition
plz help
Regards
sanju.

Are you using a routine in the transformation?
Seems you have used the field symbol there and not defined it correctly.
Can you paste the routine here?
Regards,
MD

Error while loading data on to the cube : Incompatible rule file.

Hi,
I am trying to load data on to essbase cube from a data file. I have a rule file on the cube already, and I am getting the following error while loading the data. Is there any problem with the rules file?
SEVERE: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
com.essbase.api.base.EssException: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainBeginDataload(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainBeginDataload(Unknown Source)
     at com.essbase.api.datasource.EssCube.beginDataload(Unknown Source)
     at grid.BudgetDataLoad.main(BudgetDataLoad.java:85)
Error: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
Feb 7, 2012 3:13:37 PM com.hyperion.dsf.server.framework.BaseLogger writeException
SEVERE: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
com.essbase.api.base.EssException: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainLoadBufferTerm(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainLoadBufferTerm(Unknown Source)
     at com.essbase.api.datasource.EssCube.loadBufferTerm(Unknown Source)
     at grid.BudgetDataLoad.main(BudgetDataLoad.java:114)
Error: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
Thanks,
Santhosh

" Incompatible rule file. Duplicate member name rule file is used against unique name database."
I am just guessing here as I have never used the duplicate name functionality in Essbase, nor do I remember which versions it was in. However with that said I think your answer is in your error message.
Just guessing again.... It appears that your rule file is set to allow duplicate member names while your database is not. With that information in hand (given to you in the error message) I would start to explore that.

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

Hi all,
I m getting following error while loading the data into cube.
"Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
amit shetye

Hi Amit,
This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
Hope it Helps
Srini

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Error while loading data to ASO database using rules files and buffer id

Hello all,
While loading the data to our ASO cube from a data file and using a server rules file, I am getting a warning: "Incorrect Syntax near ['$'] ". But my script no where mentions the usage of $. Also the console throws no error while loading the data. It displays the progress bar 0-100% while the data is being loaded, but actually no data is getting loaded (when retrieval is checked). Also the script is unable to form any log file or error file. Can anyone throw some light what might be the reason behind this kind of data load behaviour.
Thanks in advance.
Amit

is that the real script? I don't see you using any parameter. (That's where $ comes to play). Try a double quote with echo (I never used echo in MaxL)
Also don't post passwords and server names on a forum.
Regards
Celvin
http://www.orahyplabs.com

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Failure while loading into cube

I am doing loading into Headcount cube on daily basis through a process chain from two different datasources.
The system is 3.5
But it fails while loading and it ends up with dump in ST22 with the exception ADD_PARTITION_FAILED.
Can anybody help regarding what needs to be done to overcome this issue?
Thanks.

Hi,
This thread solves ur problem
error while loading data into cube
Tarak

FDF error while loading xml file onto PDF

Need some help here folks. Im getting a FDF error while loading some value into pdf form. It not happening all the time, 1 out of 60 times with the same xml file onto a new pdf form. Anyone know why this happening. Is there some technical support i can purchase to get this resolved.

9.1 and 9.3.4
Date: Fri, 5 Aug 2011 00:56:19 -0600
From: [email protected]
To: [email protected]
Subject: FDF error while loading xml file onto PDF
Could you let me know which version of Adobe Reader are you using?
>

Error while loading shared libraries: librt.so.1: cannot open shared object

error while loading shared libraries: librt.so.1: cannot open shared object
I cant run my apache server v2.2.3.
Can someone help me?
thanks in advance

That could be an accessibility issue. Check the user with whom you installed Apache server. Check the user has permissions to access the libraries.
-Mahendra.

Error while loading shared libraries

error while loading shared libraries
I just installed 10g . on a Fedora Core 4 machine and after a reboot I tried to run sqlplus and got this type of error. I also got the same error when trying to lsnrctl status ...
[oracle@localhost ~]$ sqlplus
sqlplus: error while loading shared libraries: /apps/oracle/product/10g/lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
[oracle@localhost ~]$
declare -x CLASSPATH="/apps/oracle/product/10g/JRE:/apps/oracle/product/10g/jlib:/apps/oracle/product/10g/rdbms/jlib"
declare -x EDITOR="vi"
declare -x G_BROKEN_FILENAMES="1"
declare -x HISTSIZE="1000"
declare -x HOME="/home/oracle"
declare -x HOSTNAME="localhost.localdomain"
declare -x INPUTRC="/etc/inputrc"
declare -x KDEDIR="/usr"
declare -x LANG="en_US.UTF-8"
declare -x LD_LIBRARY_PATH="/apps/oracle/product/10g/lib:/lib:/usr/lib"
declare -x LESSOPEN="|/usr/bin/lesspipe.sh %s"
declare -x LOGNAME="oracle"
declare -x LS_COLORS="no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:"
declare -x MAIL="/var/spool/mail/oracle"
declare -x OLDPWD="/home/oracle"
declare -x ORACLE_BASE="/apps/oracle"
declare -x ORACLE_HOME="/apps/oracle/product/10g"
declare -x ORACLE_SID="TST2"
declare -x ORACLE_TERM="xterm"
declare -x PATH="/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin"
declare -x PWD="/home/oracle"
declare -x QTDIR="/usr/lib/qt-3.3"
declare -x SHELL="/bin/bash"
declare -x SHLVL="1"
declare -x SSH_ASKPASS="/usr/libexec/openssh/gnome-ssh-askpass"
declare -x SSH_CLIENT="::ffff:192.168.1.152 2503 22"
declare -x SSH_CONNECTION="::ffff:192.168.1.152 2503 ::ffff:192.168.121.8 22"
declare -x SSH_TTY="/dev/pts/2"
declare -x TERM="xterm"
declare -x TMP="/home/oracle/tmp"
declare -x TMPDIR="/home/oracle/tmp"
declare -x USER="oracle"
[oracle@localhost ~]$
Any input would be highly appreciated.
Thanks
Ambrosius

yap. got it..
disabled SELinux then run it.
I didn't get any errors and have it up and running. Here is what I did:
Full Fedora Core 4 install with SELinux enabled (default settings). Then, after install, disable SELinux in the /etc/selinux/config file.
Thanks
Ambrosius

Error while loading Purchasing Cube.

Similar Messages

Maybe you are looking for