Error while migrating weblogic 6.1 to sunapp 8
Hi, as I run the migration, the prgress bar goes to around 50%, then stops. The log shows this error:
[stuff deleted]
sun.iasmt.util.User write: INFO: <Thu Dec 15 08:20:42 PST 2005><Exception is IASMTResourceBundle.getValue() :The Value obtained for the key passed IASMTGUI.UW_Exception is Null>
sun.iasmt.util.User write: INFO: <Thu Dec 15 08:20:44 PST 2005><Encountered ";" at line 38, column 89.
Was expecting one of:
"abstract" ...
"boolean" ...
"byte" ...
"char" ...
"class" ...
"double" ...
"final" ...
"float" ...
"int" ...
"interface" ...
"long" ...
"native" ...
"private" ...
"protected" ...
"public" ...
"short" ...
"static" ...
"synchronized" ...
"transient" ...
"void" ...
"volatile" ...
<IDENTIFIER> ...
>
Does anybody have an idea what this means? I checked the file it was hanging on, and it did not seem to have any java errors.
Thanks
Jan
Jan,
Looks like the migration tool ran into problems parsing some of the WLQL in your application. Its difficult to say what exactly might have gone wrong without more information.
Cheers,
Sats
Similar Messages
-
Error while migrating users using CSSImportExportUtility
Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz -
Error while starting weblogic server
Hi, I am getting following error while starting weblogic server
Unexpected Signal : 11 occurred at PC=0x40170bc5 Function name=fill_in_stack_trace__19java_lang_ThrowableG6HandleP6Thread
Library=/bea/jdk131/jre/lib/i386/client/libjvm.so
Current Java thread: at java.lang.Throwable.fillInStackTrace(Native Method) at
java.lang.Throwable.<init>(Throwable.java:78) at java.lang.Error.<init>(Error.java:37)
at java.lang.LinkageError.<init>(LinkageError.java:29) at java.lang.IncompatibleClassChangeError.<init>(IncompatibleClassChangeError.java:29)
at java.lang.AbstractMethodError.<init>(AbstractMethodError.java:30)
Environment : Weblogic 6.0 Sp2 on Linux Red hat 7.1
jdk 1.31
TIA
AshwaniHi,
1)Could you please try logging into sqlplus using using the below command :-
sqlplus "/ as sysdba"
2)Execute the below command to check if the password in expired :-
select username, account_status, expiry_date, where username='MDS username';
3)Change the password if the password has been expired by following the below command :-
alter user <user> identified by <password>;
4)Once the above steps are followed please login into the Weblogic Admin Console and follow the below steps:-
+ Go to DataSources ---> Select the MDS schema ----> change the password which was given in step no.3
+ Restart the Weblogic once again.
5)Lets us know the result.
Regards,
Prakash. -
Error while migrating reports from XI3.1 to BI4.0
Hi,
I have converted deski report into webi report using report conversion tool and i am trying to migrate the converted report from XI 3.1 to BI 4.0. I am getting 'Error:INF' while doing this. how to overcome this error while migration ?. any suggestions..
Regards,
Shanthakumar.Hi,
could you please provice a little more information. Can you view the converted Reports in your XI 3.1 Environment? Are you trying to view the Reports as administrator in your BI4 Environment?
Regards
-Seb. -
Error while installing weblogic portal
I am getting the following error while installing weblogic portal 10.3.2 generic.jar on existing weblogic server 10.3.2 generic.jar installation on RHEL5 with jrockit mission control 3.1.2 as jdk.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at com.bea.plateng.common.ui.console.DelegateConsoleWidget.invokeWidgetCallback(DelegateConsoleWidget.java:200)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.onLeave(ConsoleInteractTask2.java:439)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.okNext(ConsoleInteractTask2.java:361)
at com.bea.plateng.wizard.WizardController.nextTask(WizardController.java:642)
at com.bea.plateng.wizard.WizardController.run(WizardController.java:519)
at java.lang.Thread.run(Thread.java:636)
Caused by: java.lang.NullPointerException
at java.io.File.<init>(File.java:239)
at com.bea.plateng.wizard.installer.diskspace.TempDir.<init>(TempDir.java:55)
at com.bea.plateng.wizard.installer.diskspace.TempDir.getInstance(TempDir.java:41)
at com.bea.plateng.wizard.installer.helpers.DiskSpaceHelper.checkDiscSpaceForProductInstallation(DiskSpaceHelper.java:255)
at com.bea.plateng.wizard.installer.helpers.ProductDirHelper.setStoreKeysAndValidateDiskSpace(ProductDirHelper.java:474)
at com.bea.plateng.wizard.installer.helpers.ProductDirHelper.validateAndSet(ProductDirHelper.java:278)
at com.bea.plateng.wizard.installer.console.tasks.ProductDirChooserConsoleTask.onLeave(ProductDirChooserConsoleTask.java:235)
... 10 more
anyone please helpI'm getting this error as well.
Did you resolve this problem? -
Error while migrating BLOB type data
Hi ,
I am migrating the data from oracle to oracle and both soruce and target tables have BLOB type field.
I am getting error when I am executing the interface with these blob fields. But My interface is successfull if I am not maaping this blob files.
Below is the error message.
ODI-1217: Session BLOB (162501) fails with return code 942.
ODI-1226: Step BLOB fails after 1 attempt(s).
ODI-1240: Flow BLOB fails while performing a Loading operation. This flow loads target table IMAGES.
ODI-1228: Task SrcSet0 (Loading) fails on the target ORACLE connection YAGLD.
Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exist
Thanks,
Patel.Duplicate of
Error while migrating BLOB type data -
I am getting the following error while migrating my application from Flex 3.6 to Flex 4.5.1:
1067: Implicit coercion of a value of type __AS3__.vec:Vector.<Object> to an unrelated type Array.
The error is thrown on the following piece of code:
var list:ArrayCollection=new ArrayCollection(dgSoftwareTitles.selectedItems);
dgSoftwareTitles is defined as:
<s:DataGrid id="dgShareCategoryForTransfer"
x="34"
y="369"
requestedRowCount="5"
width="90%"
selectedIndex="-1"
selectionMode="multipleRows">
<s:columns>
<s:ArrayList>
<s:GridColumn headerText="SoftwareTitle"
dataField="idSoftware"
visible="false"/>
<s:GridColumn headerText="SoftwareName"
dataField="softwareName"
visible="false"/>
...more GridColumns
</s:columns>
</s:ArrayList>
</s:DataGrid>
Any ideas why this would trow the "1067: Implicit coercion of a value of type __AS3__.vec:Vector.<Object> to an unrelated type Array" error?
Thanks!
LeeI think that dgSoftwareTitles.selectedItems is a type of Vector while
public function ArrayCollection(source:Array = null) expects an array as a source. -
Error while migrating business rules
While trying to use the export/import option in EAS to migrate business rules, we have run into an error.
The export itself is fine. When trying to import, it says this:(even though it lets me select the proper xml file for importing)
Error while migrating business rules.
Detail: The import file specified is not a valid business rules xml file. Import will be terminated.
Detail:Exception occured. Please check your log file for details.
I am pretty sure I used the inherent format specified for exporting the business rules.
Both the old and new systems are version 11.1.2.
The LCM method also failed for the business rules migration.
Any suggetions?
Thanks,
SujaniWhen you export them make sure you don't have "For Calc Mgr" checked, if you do then the import with fail.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while migrating the discoverer repots
HI
we are getting the error while migrating the discoverer reports. Find the below script and the error.
-connect <**********>
-log log_file
-grant_privilege
-apps_user
-eul eul_us
-apps_responsibility DISCOVERER PROJECTS RESOURCE MANAGEMENT
-business_area_access xxxxx Projects
Command completed with errors - see log file for details.
java EulCommandLine -connect <**********> -apps_user -eul eul_us -cmdfile commands_ads_resp -log log_file
Started Fri Apr 24 06:37:45 EDT 2009 ...
Role 'DISCOVERER PROJECTS RESOURCE MANAGEMENT' not found
the above error says the role not found to the particular responsibility. Please let me know how to rectify the above error.
Thanks,
keka.Hi Keka
I am assuming that responsibility does in fact exist in the database? If not, you will need to create it.
Also, try putting double quotes around the responsibility name.
Best wishes
Michael -
Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
==================================================I don't know what could cause this error.
I would suggest you take this upto [email protected]
Kumar
Ajay Jadhav wrote:
Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
================================================== -
Getting error while starting weblogic server in jdeveloper
getting an error while starting weblogic server in jdeveloper
IN LOG(its shows following):
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
User 'principals=[weblogic, Administrators]' has administration role. All tasks by adminstrators must go through an Administration Port.
**** Authentication error while connecting to application server IntegratedWebLogicServer. Please check settings.
**** Failed to complete start-up of application server IntegratedWebLogicServer.
[Server Instance IntegratedWebLogicServer is shutting down. All applications currently running will be terminated and undeployed.]
[Forcing termination of IntegratedWebLogicServer]
taskkill /F /PID 1620
Process exited.
PLs help meUser, please tell us your jdev version!
Somehow your credentials are corrupted. Two possible solution:
1) open your system11.1.1.xxxx folder open the DefaultDomain\servers\DefaultServer\security folder and edit the boot.properties file. Remove the '(AES)...' part after username and password and write the new ones e.g. username=weblogic', password='Welcome1'. Save the file and try to start the integrated server again. Once the server starts the entries are encoded again.
2) if 1) does not work, remove the whole DefaultDomain folder and create a new WLS instance inside jdev.
Timo -
Syntax errors while migrating from non- unicode to Uni code
What are the syntax errors while migrating from non unicode to Uni code
Hi Sudheer,
u can get the information related to errors while migrating from non- unicode to Uni code from the below...pls go through...
Note 765475 - Unicode Conversion: Troubleshooting
these are the notes related to the issues of migration form non unicode to ounicode.
Related Notes
986907 - SQL Server settings for R3load based system copy
954001 - Error fix: ILLEGAL_SUBSTRING_MODIFICATION in SUMG
936441 - Oracle settings for R3load based system copy
928909 - Repair table data in SUMG in Unicode systems
895804 - Problematic rows in table DMEE_TREE_NODE
895560 - Support for languages only available in Unicode system
885441 - Common Migration Errors
842788 - DB Multiconnect: Unicode Migration
837173 - RADCUCNT in Unicode Conversion: Collective Note
756534 - Automatic Assignment of Languages with Character Statistics
753334 - Unicode Conversion: Problem in Japanese device types
726954 - Private Use Areas in Unicode Systems
722193 - RFC legacy non-Unicode clients and Unicode servers
718329 - R3load terminates the export during a Unicode conversion
695196 - Error in the export for Unicode migration
672835 - Textflags could cause problems during Unicode conversion
627764 - Unicode migration: table pools inconsistent after conversion
614550 - Troubleshooting BC-I18
587896 - Add. info on upgrade to SAP R/3 Enterprise Core 4.70 SR1
573044 - Unicode conversion for HR application
480671 - The Text Language Flag of LANG Fields
379940 - Unicode based mySAP availability
79991 - Multi-Language and Unicode support of SAP applications
73606 - Supported Languages and Code Pages
42305 - RSCPINST (I18N configuration tool)
regards,
rudra..
Assign points if helpful -
CFGFWK-60850 Error while installing weblogic portal 10.3.5
I am getting below error while installing weblogic portal 10.3.5 configuration wizard for creating domain. Please help me resolve this issue.
OS: Windows 2008 64 bit
Installable file: portal103_generic.jar
This is the first weblogic installation.
Installtion command applied: java -d64 -jar portal103_generic.jar
Test JDBC data sources.
Data Source=cgDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=cgDataSource-nonXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=p13nDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceAlwaysXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceNeverXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Why I am getting this error ? How can i resolve this ?
Edited by: Prajeesh Kumar KM on Feb 25, 2013 12:26 AMI'm getting this error as well.
Did you resolve this problem? -
Weblogic 9.1 with JDK1.6 giving error ( while doing weblogic.appc )
hi,
I am trying to build my ear using jdk1.6 with weblogic 9.1.
I am getting this error while doing weblogic.appc using my ant scripts. Could some one pls let me know the solution for this problem.
[java] Created working directory: c:\windows\TEMP\appcgen_gdoasis.jar
[java] <02-Aug-2007 14:54:22 o'clock BST> <Error> <J2EE> <BEA-160187> <weblogic.appc failed to compile yo
ur application. Recompile with the -verbose option for more details. Please see the error message(s) below.>
[java] javax.xml.stream.FactoryConfigurationError: Provider javax.xml.stream.XMLInputFactory could not be
instantiated: java.lang.InstantiationException
[java] at javax.xml.stream.XMLInputFactory.newInstance(XMLInputFactory.java:158)
[java] at weblogic.ejb.container.dd.xml.DDUtils.<clinit>(DDUtils.java:85)
[java] at weblogic.ejb.container.ejbc.EJBCompiler.parseDescriptors(EJBCompiler.java:1345)
[java] at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:431)
[java] at weblogic.application.compiler.AppcUtils.compileEJB(AppcUtils.java:292)
[java] at weblogic.application.compiler.EJBCompiler.compile(EJBCompiler.java:95)
[java] at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCompilerFlow.java:113)
[java] at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompilerFlow.java:43)
[java] at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:55)
[java] at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
[java] at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:24)
[java] at weblogic.application.compiler.Appc.runBody(Appc.java:151)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:158)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
[java] at weblogic.application.compiler.Appc.main(Appc.java:162)
[java] at weblogic.appc.main(appc.java:14)
[java] Provider javax.xml.stream.XMLInputFactory could not be instantiated: java.lang.InstantiationExcept
ion
ThanksHi,
First thing, I am not sure this will work :-)
The main issue is that there is no StAX provider to parse I-not-know-what XML file.
You may try to execute appc with the parameter
-Djavax.xml.stream.XMLInputFactory=com.bea.xml.stream.MXParserFactory
Anyhow, you may still have some issues given that Java 6 is not a supported Java version for WL 9.1.
Regards,
lg -
ALC-UPG-221-002: Errors while migrating archive session Ids.
I am doing an out of place upgrade from ES2 to ES4. I have run the Turnkey ES4 upgrade, installed SP1, copied the GDS from the old location to the new location and run Configuration Manager. When I get to the "Perform
critical tasks before component deployment" screen and click the Start button I get this error:
10:07] ALC-UPG-002-505: Disabling UserManager synchronization.
[10:07] ALC-UPG-001-501: Executing [Application Manager] plugin ...
[10:07] ALC-UPG-001-503: [Application Manager] plugin execution failed, error message from plugin is [ALC-UPG-221-002: Errors while migrating archive session Ids.]. See LCM logs for details.
[10:07] ALC-UPG-002-506: Enabling UserManager synchronization.
The LCM log has this:
[2014-08-06 10:32:58,555], INFO, AWT-EventQueue-0, com.adobe.livecycle.upgrade.gui.UpgradePhaseDialog, ALC-UPG-002-505: Disabling UserManager synchronization.
[2014-08-06 10:32:58,560], INFO, Thread-32, com.adobe.livecycle.lcm.feature.lcServer.LCServerConnector, LC Connection properties: {DSC_DEFAULT_SOAP_ENDPOINT=http://localhost:8080, DSC_TRANSPORT_PROTOCOL=SOAP, DSC_CREDENTIAL_PASSWORD=********, DSC_REQUEST_TIMEOUT=1200000, DSC_CREDENTIAL_USERNAME=administrator, }
[2014-08-06 10:32:58,560], INFO, Thread-32, com.adobe.livecycle.lcm.feature.lcServer.LCServerConnector, Validating connection...
[2014-08-06 10:32:59,961], SEVERE, Thread-32, com.adobe.livecycle.upgrade.control.PhaseRunner, Aborting. Invocation of method [configurePreDeploy] failed for com.adobe.livecycle.upgrade.plugins.from9xto100.applicationmanager.Upgrade9xTo100Applicat ionManagerPlugin. Caught com.adobe.livecycle.upgrade.UpgradeException, message: ALC-UPG-221-002: Errors while migrating archive session Ids.
com.adobe.livecycle.upgrade.UpgradeException: ALC-UPG-221-002: Errors while migrating archive session Ids.
at com.adobe.livecycle.upgrade.plugins.from9xto100.applicationmanager.Upgrade9xTo100Applicat ionManagerPlugin.configurePreDeploy(Upgrade9xTo100ApplicationManagerPlugin.java:110)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.adobe.livecycle.upgrade.control.PhaseRunner.run(PhaseRunner.java:244)
at java.lang.Thread.run(Thread.java:724)
[2014-08-06 10:33:01,763], INFO, AWT-EventQueue-0, com.adobe.livecycle.upgrade.gui.UpgradePhaseDialog, ALC-UPG-002-506: Enabling UserManager synchronization.
Nothing tells what the errors are.Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav
Maybe you are looking for
-
Being specific in the Constructor, only when necessary
Hello! I am new to Java. I have a few really simple question. I know this much so far: - Hiding is when a variable overrides another within a stronger (more inner) scope. - Hiding is not good convention since it may confuse readers of code. So I have
-
I am running CS3 with Bridge. When I open Bridge no images show in the preview area. It shows how many images we have in the file, but the image area is totally blank. It was working fine until today. Help! Update: Now Bridge won't open at all...It s
-
Iphotos won't open on mac is just continues to load..Help!
Everytime I try to open iphotos it just keeps loading..I have pictures saved on there and I wanna make sure they dont get deleted because Iphotos wont open.
-
I recently migrated my user account via TimeMachine from a 2008 iMac to a new MacBook Pro. Despite the Pictures folder including my iPhotoLibrary of some 65GB incl thousands of photos and videos, iPhoto(version9.5.1) consistently opens it as an empty
-
Hello, For a few days, i'm having an annoying problem with my computer. It's a PC i built myself on november 2012. Here is my full configuration (not overclocked) : Motheboard: MSI X79A-GD45 (8D) CPU: Intel Core i7-3820 (3,6 GHz) Fan: Noctua NH-D14 S