Error while opening a query in query designer
Hello all,
There is an issue with the BEx Query Designer. A user is facing the following error while he tries to open a query using the Query Designer.
Error:
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to SAP gateway failed
Connect_PM GWHOST=10.233.0.167, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.233.0.167:3300' not reached
TIME Wed Nov 26 16:35:58 2008
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 2985
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 1
Please help me in resolving this issue.
Regards,
Shahid Ahmed.
Connect to SAP gateway failed
You cant connect to gataway, may be it's down to (if you have
some issues going on the server
Regards.
Similar Messages
-
Error while opening list workflow in SharePoint designer 2010
Hi,
I am trying to open list workflow in SharePoint designer 2010,its showing me the following page.
Please help me how will be able to edit the workflow.
While i click on "export to visio",its showing the error as "SharePoint designer encountered an error generating the visi workflow drawing".
Please help me to get the logic of the workflow,so that i can create new one.
Thank youHi Aditi,
Which type of workflow did you use?
Did you create the workflow using SharePoint 2010 Designer or built-in workflow template?
If the workflow was created using SharePoint 2010 Designer, for editing the workflow using SharePoint Designer, open the site with SharePoint 2010 Designer, then click the 'Workflows' in left panel. Then in the right panel, click the workflow that you
want to edit, then click 'edit workflow' under Customization.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Reg. Bex Error while opening query in query designer!!!!!
Hi Guys!!
Can any one help me in getting out of this issue.
I am getting BEx Error while opening query in query designer as below.
3:45:00 PM.400: Info: Query Designer Start. Revision: 500
3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager
-CALLING-FROM- 3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDfForm.InitFromCommandManager(QDbCommandManager iCommandManager)
at com.sap.bi.et.QueryDesigner.QDbCommandManager..ctor(QDbApplicationData iApplicationData, QDfForm iWindow)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Init()
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Table View
3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Rows/Columns
3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Cells
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Conditions
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Exceptions
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - InfoProvider
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Filter
QDbCommandManager::CommandExecute - Properties
QDbCommandManager::DoViewCommand - Properties
QDdEventDispatcher::MenuItemClickedHandler - Bar clicked: OpenQuery
QDbCommandManager::CommandExecute - Open...
OSDialogForm caught Exception: GetNodes: RFC Exception
-EXCEPTION-START- 3:45:19 PM.24: TRACE EXCEPTION ---
Exception Name: ObjectDisposedException
Exception Message: Cannot access a disposed object.
Object name: 'OSDialogForm'.
Exception at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Full Stack: at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
-EXCEPTION-END----
-CALLING-FROM- 3:45:19 PM.24: TRACE EXCEPTION ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Thanks in advance
PeterHi
If I got your question properly, you have SAP GUI Installation issues , Try to install relevant Excel version too.
http://help.sap.com/saphelp_nw70/helpdata/en/9c/03a042b443c56ae10000000a155106/frameset.htm
BASIS Team can help you in this.
Hope it helps -
Error while openening InfoProvider in Bex Query Designer
Hi all,
i am getting an error while opening the InfoProvider for a new Query in the Bex Query Designer.
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Exception CX_RSR_MESSAGE in program SAPLRRMS
RRMS_X_MESSAGE
Main Program: SAPMSSY1
Include Program: LRRMSU13
What could be the problem?
Thanks in advance
AndreasHello Andreas,
seems as if JCo Connections on your system have not been set up correctly.
Please have a look here:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
Regards,
Daneil -
Getting below error while opening query in bex 3.5x
Dear Guru's
I am getting below error while opening query in bex 3.5x
The following object were not found when accesing the server .
Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
Regards
KaranHi,
1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
2) so create an authorization object for each of these attributes with * (full authorization)
Regards,
Marasa. -
Cnnection error while creating universe on Bex Query in BW
Hi
I am getting connection error while connecting to BW Bex query.
The error i am getting while creating universe is A runtime exception has occured Error getting levels for hierarchy dimension .....:Unknown error.
After this
Also while creating universe no key figures/measures are getting generated from Bex query to designer.
Also in Bex query which are created as mandatory variables comes as Prompts in webi.
But when I try to parse in Condition filter it is throwing error.
Currently that mandatory variable is From Date and To Date
Is we require to change the prompt syntax in Condition filter.
Also kindly suggest solution for Connection error as impemtation is getting affected.
Regards
Gaurav MangHi
R u saying allow external acces in BEX query.This option in Bex Query designer.
Or In whether while creating universes under properties tab there is use of OLAP universes option has to be made to Yes.
This both things we have tried
Let me know any other option to be tried.
Regards
gaurav mang -
Error While Creating Date type condition query
Hi All,
I am getting following error while creating a multiple condition query.
ERROR:java.lang.IllegalArgumentException: Unexpected field type for D: java.lang.String
I am pasting the scrap of the code for review below.
pls note after removing the condition cond6; it works fine, and cond6 is for date type field.
for(int j=1;j<7;j++){
fd[j] =trd.getFieldDescriptor(arrayHeaderFieldNames[j]);
BasisFieldType bft1 = fd[j].getFieldType();
if (bft1 == BasisFieldType.C) {
filterOperator[j] = RelationalOperatorType.CONTAINS; }
else{
filterOperator[j] = RelationalOperatorType.EQUALS;
order[j] =queryFactory.createSortOrder(fd[j],true);
cond1 =queryFactory.createCondition(fd[1], filterOperator[1], values[0]);
cond2 =queryFactory.createCondition(fd[2], filterOperator[2], values[1]);
cond3 =queryFactory.createCondition(fd[3], filterOperator[3], values[2]);
cond4 =queryFactory.createCondition(fd[4], filterOperator[4], values[3]);
cond5 =queryFactory.createCondition(fd[5], filterOperator[5], values[4]);
cond6 =queryFactory.createCondition(fd[6], filterOperator[6], values[5]);
Condition cond = queryFactory.createCondition(new Condition[]{cond1,cond2,cond3,cond4,cond5,cond6},LogicalOperatorType.AND);
Please Help!
Thanks n regards,
Kapoorchand.Hi,
well that problem is a long time back -. I only have in mind that the date I had to transfer to the quesry was in a "strange" format. Have a lock into the documentation for the date field - your date field is not recognised as a date field from the quesry engine and so this fails - but unfortunately I have no idea at the moment how I fixed it last time - how I converted my date field......
Sorry, thast I can not give you the real point - but I will have a lock into the old code - hopefully I find it soon.
Regards,
Oliver -
Error while opening site studio designer
Hi,
We are getting error while opening the site studio Desiner in Server. It gives unexpected error with three options, view log, close and continue, then program just get closed.
Yesterday we have upgraded site studio component and designer -
Site studio designer from 10gR3(10.1.3.3.2) to 10gR3(10.1.3.5.0)
Site studio component from 7.7.2.405 to 8.0.0.645
This issue is not coming for the user who have installed the site studio component and designer but rest all user are facing the problem while opening site studio designer in the server.
Below mentioned is the scanrio -
A) All the users(UserA,UserB,UserC) have the admin access to the server.This installation has been done by UserA. UserA only able to open the SS-D and remaining all are getting error
B) The issue is on the same machine on which site studio designer is installed.
C) Multiple users are using same SS-Designer
D) Error occured as soon as the userB,UserC went to select site studio designer from start menu on the same server and getting the same error.
E) UserB who is also having admin access has tried this option of un install and re-install SS-D,but he is also not able to open the SS-D. Still only UserA is able to access the SS-D.
Any kind of resolution much appriciated.
Thanks and Regards,
SumitHi,
Thanks for the suggestions, Yes userB and userC are able to edit regedit.
I have tried to install SS-D with userB and userC but then too both of them getting the same error, but userA is able to open SS-D.
Error --
<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="SSDesignerLogFile.xsl"?>
<LOGFILE>
<LOG SOURCE="Site Studio Designer" TYPE="INFO" DATE="02/02/11" TIME="05:39:32">Site Studio Designer Logfile Initialized</LOG>
<LOG SOURCE="SSLoggerEngine" TYPE="WARNING" DATE="02/02/11" TIME="05:39:32">Loaded language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\SSLoggerEngineRes.dll)</LOG>
<LOG SOURCE="SSCommonMfc" TYPE="WARNING" DATE="02/02/11" TIME="05:39:32">Failed to load language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\BCGCBProRes.dll)</LOG>
<LOG SOURCE="SSCommonMfc" TYPE="WARNING" DATE="02/02/11" TIME="05:39:32">Loaded language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\SSCommonMfcRes.dll)</LOG>
<LOG SOURCE="Site Studio Designer" TYPE="WARNING" DATE="02/02/11" TIME="05:39:32">Loaded language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\SiteStudioDesignerRes.dll)</LOG>
<LOG SOURCE="SSHtmlTidy Control" TYPE="WARNING" DATE="02/02/11" TIME="05:39:34">Loaded language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\SSHtmlTidyRes.dll)</LOG>
</LOGFILE>
Regards,
Sumit -
Java Communication error:Error while opening an RFC connection
Hi,
I am getting Java Communication error:Error while opening an RFC connection when i try to run a query from Bex analyser.
please let me know how to resolve this
Thanks
Bala DuvvuriThis error usually comes when the java stack is not upgraded.
when you upgrade yourABAP stack, simultaneously you have to upgrade the java stack also.
Please co-ordinate with your basis team to inform EP team to upgrade the java stack when basis team do ABAP stack upgrade.
Hope this would help you. -
Error while opening the application help
Hello,
We are trying to open the application help from the R/3. It is giving
us the follwoing error.
This is linked to the knowledge warehouse server 6.20.
Error:
SAP Internet Knowledge Server
The IKS cannot display the page you asked for.
Please contact the administrator if this problem persists.
Additional infomation:
RFC Error: System exception raised, connection closed (SIW_IKS_VAR_GET)
RfcRc: <3>, ErrorInfo:
The confuguration looks fine as per the note # 381266.
The help is working fine previously.
Thanks in advance.
Best regards,
Madhav.Hi Arun,
Error due to incorrect installation of life cycle designer.
check the below links for solution.. ( same issue ).
Error Message "Error while Opening the Document"
Error - Adobe Live Cycle designer
Regards
Srinivas -
Error while opening the Visual composer
I have downloaded and installed the following version from sdn.
SAPNWCE71TrialSP1Preview_CompEnvServer .
When i am trying to open the VC in browser. it is giving the following error while opening.
Failed to open the workspace due to the following error : Kits manifest is bad or missing.
More information : Failed to invoke the function."actionKitsManifest" of the remote service:'LibManager'.
If you to see the screen shot the error i have uploaded in to the wiki in the following path:
Visual Composer > Main > Attachments > visualComposerError .gif
Kindly tell me what is the work around need to be done for this.
Regards
VijayHi I've copied the following section from the VC 6 installation manual.
It worked from me, maybe it works for you:
4 Preparing the Visual Composer Client
Machine
Visual Composer Storyboard, operating on the Visual Composer server, is the design
environment in which you create your portal content. It functions as a thin-client application
that can be accessed from the Internet Explorer web browser of any machine with network
access to the Visual Composer server. See the Visual Composer User Guide for instructions
about logging on to Visual Composer Storyboard from a client machine.
In order to log on to and work with Visual Composer Storyboard, be sure that your Visual
Composer client machine meets the following software requirements:
Microsoft Internet Explorer 6.0 SP1or higher
Microsoft XML Parser 4.0
Adobe SVG Viewer 3.0
Download MS XML parser 4:
http://download.microsoft.com/download/9/6/5/9657c01e-107f-409c-baac-7d249561629c/msxml.msi
Download SVG from
http://www.adobe.com/svg/viewer/install/mainframed.html
Best regards, Marcel. -
Hi guys...
i have a big problem and i need some answers from you.
I have in my laptop saplogon 710 Final Release File version 7100.1.0.1027
and microsoft office 2007...
when i try to open a planning folder the system gives me the following error:
"Error while opening document" and the perfomance assistant gives me
"Message no. SOFFICEINTEGRATION143"....
I cant enter in the planification folder with my laptop, and i dont know what else
to do.
Previously I had the saplogon 6.40 and office professional 2003, and it doesnt work anyway...
please, i need help..
does anybody know how to solve it?
Regards,
Francis.Hi Guillermomo,
This thread may help you to resolve your error.
Re: Error in Adobe life cyle designer
Thanks
Allen -
Error Message "Error while Opening the Document"
Hi Friends,
I have a problem while opening the SFP transaction and Clicking on the Layout Tab the SAP System is giving an error message saying "Error while Opening the Document".
I have tried testing on several systems like IDES, ERP, Retail systems. But it is giving me same error. Is this the problem with ADOBE LIVECYCLE DESIGNER?
And when I click on the Performance Assistant it has given me some information:
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Friends can you help me in solving this problem.
Thanking yoy in Advance
Pradeep GoliPradeep,
Maybe Live Cycle Designer has not been uninstalled correctly from your system. So goto the following lcaotions and remove the Designer folder if you find them:-
C:\Program Files\Adobe
C:\Documents and Settings\<your-username>\Application Data\Adobe\
Alternatively try installing Live Cycle Designer on some other machine in your network and see if you encounter the same error.
Similar thread for reference : Error - Adobe Live Cycle designer
Chintan -
Hello All
I have designed 1 web site in flash , now my clients want
some changes in that , but the problem is that file is not opening,
i have the source of that file but when i m trying to open that
file then i m getting error " error while opening file." i dont
know why its coming ? what will be the reason of that ? is it may
bcoz of version conflict ? pls help me.
Thanx in advance.
Dinesh
S Naidu Online.hmmm - i doubt its a version conflict since you said you
built it - so it must be the same version
and the same copy of flash.
It is not uncommon for a FLA to become corrupt - in which
case, a back-up file is necessary.
Especially with client projects - i make periodic back-ups
daily - do a save-as with a new name is
recommended as well as copying files to different hard drives
and/or burning to disc. In a worst
case scenario like corrupted files, hard drive failure, act
of nature etc...you have a fighting
chance of not losing your work.
I often send upload the source files to a folder on the
clients hosting server to be even safer.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Snaidu Design wrote:
> Hello All
>
> I have designed 1 web site in flash , now my clients
want some changes in that
> , but the problem is that file is not opening, i have
the source of that file
> but when i m trying to open that file then i m getting
error " error while
> opening file." i dont know why its coming ? what will be
the reason of that ?
> is it may bcoz of version conflict ? pls help me.
>
> Thanx in advance.
>
> Dinesh
> S Naidu Online.
> -
Error while opening administrator Editior
Experts!
When I open HANA studio I see the error's below could any one help.
when I place cursor on systems - Local host - system state can't be determined , SAP control request failed : Unexpected end of file from server
I see this error when I open administrator console.
" Error while opening administrator Editor ' reason could not get environment of system 'JFJ' sap_retrieval_path cannot be determined
Thanks,'
JoeHi Joe,
This is 'shared' HANA system and by design your HANA DB user doesn't have a lot of privileges.
Best regards,
Emil -
Error while openning BPS Layout
Hello friends...
I have the following problem and I hope some of you can help me out with this issue:
I'm trying to open a BPS layout and it gives me the SOFFICEINTEGRATION143 error.. The message is "Error while openning document"...
I have microsoft office professional 2003 and SAPLOGON 710 Final Release Patch level 5
Does anybody have the same problem?
Please help.
Answers will be rewarded...
Thnaks in advance.Hi Guillermomo,
This thread may help you to resolve your error.
Re: Error in Adobe life cyle designer
Thanks
Allen
Maybe you are looking for
-
My iPhone doesn't want to turn on :S
yesterday I was using it normally as I always do, I setted up my alarm to wake me up this morning and it didn't :S and now that I woke up I see that it doesn't turn on!!! I just left it on my night table right next to me, I left my iPhone and on top
-
I need to know a lot of things about Blackberry Curve 9300, I need hel please...
Hello there! Some of the questions or problems I'm encountering now maybe for some is nothing & seemed silly but for me it's giving me headache. First, just downloading & installing the Blackberry Desktop Software for PC is giving me a problem alread
-
Interactive graphs in Edge Animate - how to add the jqPlot library
Hello all I'd like to add interactive graphs in my Edge project, but can't use SVG. I'm now trying to implement the jqPlot library, but can't get it to work. Here is what I have so far: In "creationComplete" in "Stage" I've added this: $('<div id="ch
-
Regarding the Summarization in Infospoke
Hi Gurus, We are having 0ne Million Records in the Infocube,But once when we send the data through a logical file,when are getting only 2hundredthousand records.Is The infospoke Summarizes the data in Badi.Please shed some Light on this issue. Thank
-
HT1212 will i loose all the photos on my phone if it hasnt been backed up?
will i loose all the photos on my phone if i reset it with a hard reset?