Error while opening planning web Forms
Hi ,
I am facing the below error whenever I am trying to open the planning web form.
"Target Unreachable, 'formManagement' returned null
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #40"
Could you please help me on this?
Have a read of the following support doc which is pretty much the same - "Hyperion Planning Error "Target Unreachable, 'getFormsForFolder' returned null -- ADF_FACES-60097" When Opening Web Forms (Doc ID 1527253.1)"
Cheers
John
Similar Messages
-
"Access Denied" pop up error while opening adobe online form in IE8.
"Access Denied" pop up error while opening adobe online form in IE8. I use crosslink to connect to client network and then open IE with App Tunnel. Tried to re-install Acrobat reader multiple times but issue still persist. Even tried to change the PDF properties (Edit-> Preference- General/Internet/Security Enhanced)
Hello Adobe technical Team,
I am struggling to fix the issue. Tried a lot of combinations to manipulate PDF preference, browser setting but failed to fix the issue. Can someone please look into the details and advise? Thanks in advance for any help.input. -
Error while opening planning application
I am getting error while opening application through planning.
An error occurred while processing this page. Check the log for details.
Please close the current tab and open application again.
Cannot configure the system. Please check the configuration.
2 days back I reconfigure the system as well with new IP address
Regards,
Sami KhanI mean i configure it to new IP .. I didnt use IP address ifact I use host name to configure.
these are the planning logs..
Oct 8, 2012 5:33:19 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8300
Oct 8, 2012 5:33:19 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 312 ms
Oct 8, 2012 5:33:19 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Oct 8, 2012 5:33:19 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.0.28
Oct 8, 2012 5:33:19 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Oct 8, 2012 5:33:19 PM org.apache.catalina.core.StandardHost getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
Oct 8, 2012 5:33:19 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /HyperionPlanning from URL file:E:\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning
[ERROR] ManagerBase - IOException while loading persisted sessions: java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: com.hyperion.planning.HspImages <java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: com.hyperion.planning.HspImages>java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: com.hyperion.planning.HspImages
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
at java.io.ObjectInputStream.readSerialData(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at org.apache.catalina.session.StandardSession.readObject(StandardSession.java:1342)
at org.apache.catalina.session.StandardSession.readObjectData(StandardSession.java:885)
at org.apache.catalina.session.StandardManager.doLoad(StandardManager.java:416)
at org.apache.catalina.session.StandardManager.load(StandardManager.java:343)
at org.apache.catalina.session.StandardManager.start(StandardManager.java:657)
at org.apache.catalina.core.ContainerBase.setManager(ContainerBase.java:499)
at org.apache.catalina.startup.ContextConfig.managerConfig(ContextConfig.java:315)
at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:635)
at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:216)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4290)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:277)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:701)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
at org.apache.catalina.core.StandardService.start(StandardService.java:480)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Caused by: java.io.NotSerializableException: com.hyperion.planning.HspImages
at java.io.ObjectOutputStream.writeObject0(Unknown Source)
at java.io.ObjectOutputStream.defaultWriteFields(Unknown Source)
at java.io.ObjectOutputStream.writeSerialData(Unknown Source)
at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
at java.io.ObjectOutputStream.writeObject0(Unknown Source)
at java.io.ObjectOutputStream.writeObject(Unknown Source)
at org.apache.catalina.session.StandardSession.writeObject(StandardSession.java:1415)
at org.apache.catalina.session.StandardSession.writeObjectData(StandardSession.java:902)
at org.apache.catalina.session.StandardManager.doUnload(StandardManager.java:539)
at org.apache.catalina.session.StandardManager.unload(StandardManager.java:485)
at org.apache.catalina.session.StandardManager.stop(StandardManager.java:687)
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4496)
at org.apache.catalina.core.ContainerBase.removeChild(ContainerBase.java:952)
at org.apache.catalina.core.StandardHostDeployer.remove(StandardHostDeployer.java:670)
at org.apache.catalina.core.StandardHost.remove(StandardHost.java:946)
at org.apache.catalina.startup.HostConfig.undeployApps(HostConfig.java:1028)
at org.apache.catalina.startup.HostConfig.stop(HostConfig.java:1005)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:351)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.stop(ContainerBase.java:1123)
at org.apache.catalina.core.ContainerBase.stop(ContainerBase.java:1135)
at org.apache.catalina.core.StandardEngine.stop(StandardEngine.java:483)
at org.apache.catalina.core.StandardService.stop(StandardService.java:542)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:2347)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:605)
at org.apache.catalina.startup.Catalina$CatalinaShutdownHook.run(Catalina.java:648)
[ERROR] ManagerBase - Exception loading sessions from persistent storage <java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: com.hyperion.planning.HspImages>java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: com.hyperion.planning.HspImages
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
at java.io.ObjectInputStream.readSerialData(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at org.apache.catalina.session.StandardSession.readObject(StandardSession.java:1342)
at org.apache.catalina.session.StandardSession.readObjectData(StandardSession.java:885)
at org.apache.catalina.session.StandardManager.doLoad(StandardManager.java:416)
at org.apache.catalina.session.StandardManager.load(StandardManager.java:343)
at org.apache.catalina.session.StandardManager.start(StandardManager.java:657)
at org.apache.catalina.core.ContainerBase.setManager(ContainerBase.java:499)
at org.apache.catalina.startup.ContextConfig.managerConfig(ContextConfig.java:315)
at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:635)
at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:216)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4290)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:277)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:701)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
at org.apache.catalina.core.StandardService.start(StandardService.java:480)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Caused by: java.io.NotSerializableException: com.hyperion.planning.HspImages
at java.io.ObjectOutputStream.writeObject0(Unknown Source)
at java.io.ObjectOutputStream.defaultWriteFields(Unknown Source)
at java.io.ObjectOutputStream.writeSerialData(Unknown Source)
at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
at java.io.ObjectOutputStream.writeObject0(Unknown Source)
at java.io.ObjectOutputStream.writeObject(Unknown Source)
at org.apache.catalina.session.StandardSession.writeObject(StandardSession.java:1415)
at org.apache.catalina.session.StandardSession.writeObjectData(StandardSession.java:902)
at org.apache.catalina.session.StandardManager.doUnload(StandardManager.java:539)
at org.apache.catalina.session.StandardManager.unload(StandardManager.java:485)
at org.apache.catalina.session.StandardManager.stop(StandardManager.java:687)
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4496)
at org.apache.catalina.core.ContainerBase.removeChild(ContainerBase.java:952)
at org.apache.catalina.core.StandardHostDeployer.remove(StandardHostDeployer.java:670)
at org.apache.catalina.core.StandardHost.remove(StandardHost.java:946)
at org.apache.catalina.startup.HostConfig.undeployApps(HostConfig.java:1028)
at org.apache.catalina.startup.HostConfig.stop(HostConfig.java:1005)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:351)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.stop(ContainerBase.java:1123)
at org.apache.catalina.core.ContainerBase.stop(ContainerBase.java:1135)
at org.apache.catalina.core.StandardEngine.stop(StandardEngine.java:483)
at org.apache.catalina.core.StandardService.stop(StandardService.java:542)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:2347)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:605)
at org.apache.catalina.startup.Catalina$CatalinaShutdownHook.run(Catalina.java:648) -
Error while opening a standard form in apps11i
while opening a po form POXPOEPO thru form builder, error is showing that some objects are unable to load.
how to rectify that can someone help it outHave a look at this Re: URGENT: Forms 6i error
-
Getting Error While Opening the Oracle Form 6i in 10g
Hi All ,
FRM-10102: Cannot attach PL/SQL library XXX. This library attachment will be lost if the module is saved.
I am getting above error message while opening Oracle 6i Form in 10g.
I get the following Alert message when I try to attach the library to my form -
Attached library name
S:\.........xxx.pll contains non-portable directory specification. Remove path? Yes/No?
If I select 'No', the Form compiles and runs without any error.
But if I select 'Yes', I get the following error message:
FRM-40039: Cannot attach library xxx while opening form.
All files (fmb, fmx, pll, plx) are on the same path. I detached and then re-attached the library but this didn't work for me?
Help Appreciated.
Thanks & Regards,
Ram.use the shiped batch program frmplsqlconv.bat to convert all your forms/librarys from Forms 6i to 10g.
you can call it in wizard mode from the start menu (e.g. OracleDeveloperSuite <OraHome> => Forms Developer => Forms Migration Assistant (GUI Mode) and follow the instructions step by step
or you can call it by batch to convert all your forms/librarys. The batch file is found in
<ORA10g_HOME>BIN\frmplsqlconv.bat
=>
frmplsqlconv.bat <formname> -
Error while opening the web analysis reports.
Hi,
Whenever i am trying to open any web analysis reports i am getting the error message as "error occurred while opening document. document Id={0}. Is anyone have any idea about this issue.
Thanks & Regards
EktaHi,
I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
I had to recreate my reports again as I didn't get any other way to deal with this problem.
Please shared any other alternative option, if you found while working on this issue.
Thanks & Regards,
Mohit Jain -
NetRetryCount and netRetryInterval error in Hyperion Planning web form
User is getting this error when trying to save data on a web form. The error happens intermittenly and on different forms. It is difficult to pinpont the problem, as it does not happen consistently on the same form and as the administrator, I have never been able to replcate if on my computer and under the admin role. It actually causes the Hyperion Planning service to crash and we have to restart the service. The most recent time this occurred there was a rule that was running on save. We have removed the run on save for now. Does anyone know what setting need to be adjusted to eliminate this error?
Hi
You can probably try changing the value for netRetryCount and netRetryInterval in Essbase.cfg. Consider changing NetDelay too.
Essbase.cfg file is loacted in:
$HYPERION_HOME/products/Essbase/EssbaseServer/bin/Essbase.cfg
Thank You
Sandeep Kumar Upadhyay
Edited by: 901142 on Dec 8, 2011 11:49 AM -
Error while opening the custom forms-''function not available to this respo
Error: Function not available to this responsibility , change responsibility or contact ur system administrator
Hiiiii,
While accessing the custom forms in release 12i we are facing the popup error and the form is not getting opened up: "Function Not available to this responsibility. Change Responsibilities or Contact your System Administrator"...
I check the custom top path in $APPL_TOP/admin/adovars.env... its fine there..
but the $Apache_top is not there...
can u plz tell me the solution....
Thanks
Meenakshi Vermauser609981 ,
If ur referring to forms, u need to search in appropriate forum, as this forum is only for OAF queries, and if its realted to OAF page, check the the function of oa page is attached to the specific responsibilty .
--Mukul -
Error while opening the ADOBE FORM via mail
Hi to all,
I have created a program to attached ADOBE FORM to mail.
When I execute the program, it sends ADOBE FORM to my mail ID successfully.
But when I open my mail and try to open attached ADOBE FORM, it gives error
ADOBE READER COULD NOT OPEN u2018PDF FORM (1). PDFu2019 because it is either not a supported file type or because the file has been damaged ( for example, it was sent as an email attached and wasnu2019t correctly decoded).
Please can any tell me, what the problem is and what the solution is for that?
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Aug 1, 2011 2:22 PMThanks for reply,
below is the code.
data:
l_fm_name TYPE rs38l_fnam,
l_formname TYPE fpname VALUE 'ZTESTF1' ,
fp_docparams TYPE sfpdocparams,
FP_FORMOUTPUT TYPE FPFORMOUTPUT,
fp_outputparams TYPE sfpoutputparams.
data: I_ATT_CONTENT_HEX type SOLIX_TAB.
START-OF-SELECTION.
data: st TYPE ZTABFM11.
data: it type table of sflight.
data: wa like LINE OF it.
data: wa_st like LINE OF ST.
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
fp_outputparams-nodialog = 'X'.
fp_outputparams-preview = 'X'.
fp_outputparams-device = 'LP01'.
fp_outputparams-getpdf = 'X' .
fp_outputparams-dest = 'LP01'.
fp_outputparams-reqimm = 'X'.
fp_outputparams-reqdel = 'X' .
fp_outputparams-xfpoutdev = 'LP01'.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = l_formname
IMPORTING
e_funcname = l_fm_name.
E_INTERFACE_TYPE =
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
select * from sflight into TABLE it.
loop at it into wa.
wa_st-CARRID = wa-CARRID.
wa_st-CONNID = wa-CONNID.
wa_st-FLDATE = wa-FLDATE .
wa_st-PLANETYPE = wa-PLANETYPE.
append wa_st to st.
endloop.
CALL FUNCTION l_fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
st = st
IMPORTING
/1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT = result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = FP_FORMOUTPUT-PDF
APPEND_TO_TABLE = ' '
IMPORTING
OUTPUT_LENGTH =
TABLES
BINARY_TAB = I_ATT_CONTENT_HEX .
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Fill the details.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'flight details' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'flight details'
I_ATTACHMENT_SIZE =
I_ATTACHMENT_LANGUAGE = SPACE
I_ATT_CONTENT_TEXT =
I_ATTACHMENT_HEADER =
I_ATT_CONTENT_HEX = I_ATT_CONTENT_HEX ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document ).
Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value 'mail id '.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'Form sucessfuly send to person' type 'I'.
plesase can any one, provide the soultion.
i shall be thankful toy you for this.
regards
pavneet rana -
Error while opening supplier/customer forms and payment manager templates
we are having 11.1.0.7 database and 12.1.1 E-business suite with 10.1.2.3 forms
user is getting
Error Page
You have encountered an unexpected error. Please contact the System Administrator for assistance.
while accessing supplier/customer forms and payment manager templates and this gets resolved after bouncing the application. the current instance is a staging one and this will be replicated to production so please help or suggest any solution or work around
thanks
pankajThere should be a link on the error page for further details about the error. Can you post the contents of that error link page ?
Pl also check the Apache logs for any errors - see MOS Doc 419839.1 (How to enable Apache, OC4J and OPMN logging in Oracle Applications R12) for name and location of the Apache log files.
HTH
Srini -
Error while opening Adobe Interactive form.
Hi ,
We have few custom applications which contains an adobe interactive form. When it is getting called it throws the following error.
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
com.sap.engine.services.webservices.jaxrpc.exceptions.XmlUnmarshalException: XML Deserialization Error. Invalid parser state. This exception is caused when deserializing XML type [http://www.w3.org/2001/XMLSchema]<base64Binary> and wrong XML node is found.
Kindly guide me how to resolve this issue.
Best Wishes
Idhaya RHello Idhaya,
Does this forum thread help?
Re: Error in Risk Analyzer of Access Enforcer
Also, when troubleshooting XML errors, I like to open the input source XML in a web browser or validate the markup online at:
http://validator.w3.org/
--- Scott -
XSL error while creating new WEB FORMS in Web Page Composer (WPC)
Hi Experts,
I am getting following error :
An error occurred while generating a preview : Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
Regards,Hi,
have you tried to open your XSL file with Internet Explorer to see if it is not a XSL syntax problem ?
Fabien. -
Error while opening the web page
Hi,
i am trying to start the srm login page using web. with the service BBPSTART..its not opening it shows ' Firefox can't establish a connection to the server at xxxx.xxx'.
what might be the problem...
kindly help me with it...
thx.Hi,
Its OK.
That is why I have already written that you have to take your Basis Guy Help to find out whether he has assign the port to the SRM Server and has maintained the entry in the table.
Take help of your Basis Consultant
Regards,
Sachin -
Getting javascript error while opening offline adobe forms sent via email.
ERROR: script failed(language is formcalc,context is xfa[0].form[0].data[0].FORM[0].
script = BODY.instanceManager.addInstance(1);
Error:accessor "BODY.instanceManager.addInstance(1)" is unknown.
I have written the code in Javascript and run at client.
Below is my sample code:
var nlength = ROW.BODY.nodes.length;
var nrow = 0;
for(var nCount=0;nCount<nlength;nCount++)
{nrow = nrow + 1;}
if (nrow == 7)
xfa.host.messageBox("Maximum allowable rows is 7","Warning",3);
else
{ROW.BODY.instanceManager.addInstance(1);
xfa.form.recalculate(1);
xfa.host.messageBox("Row added");}
Rows are getting added.
I am not getting the problem,Pls help me.Hello all,
Thanks for your replies.
I have made Show -> click and Language -> Javascript and Run at -> Client for the button 'ADD'(this button inserts line) and in the blank space i have written the code as stated above.
Then,i have activated the form.
As per the Submit button it is working fine...
I am new to adobe forms and i have done a self-training for this..
Maybe I am doing something wrong...
Pls help.
Thanks and regards,
Raka. -
Planning web form error "This form contains unsaved data. Select OK to cont
I've got a user that suddenly gets an error on a planning web form. She opens the form and enters data but when she tries to submit gets the following error “This form contains unsaved data. Select OK to continue without saving data, or Cancel to discard operation” and then it takes her back to the blank form. This form worked for her yesterday but not today. She has tried shutting down hyperion, even rebooting her machine but no luck. Any ideas?
Hi,
Make sure scripting isn't disabed in hte web browser.
Regards,
Robb Salzmann
Maybe you are looking for
-
Help me configure Change request management !!!
Dear friends, I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise.. Just want to know Clear few things before i proceed.. I am also refering SPRO and related notes Sc
-
PReq 1100000000/ not convertible (status )
while creating RFQ with reference of PR iam getting this error PReq 1100000000/ not convertible (status ) Pls guide...
-
Just downloaded iOS 5 and can't get "reminders" to input new reminder
Just downloaded iOS 5 and can't get "reminders" to input new reminders
-
TS1368 Please hepl to resolve the following error message
I have an error message "This Iphone cannot be connected because the apple mobile device service is not started" How do I start it????
-
Restricting a matching rule to user
Hi All, In my project there are multiple strategies defined depending upon the country and region.I wanted to know if we can restrict the user to use a particular strategy only because i m using named searches concept to allow a user to operate on re