Error while opening Reports URL

Hi,
I'm facing problem while opening Oracle 11g Reports URL. I was able to start the WLS_REPORTS. The status of the same in Oracle EM is up. But when I try to open the reports using http://<servername:port>/reports/rwservlet
I ensured that the port entered in the reports_install.properties file and httpd.conf is the same.
From the URL we are getting the following error.
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1. 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
The following is the error description from console.
Incident Id: 62
Incident Source: SYSTEM
Create Time: Fri Feb 25 11:28:52 CET 2011
Problem Key: BEA-101020 [HTTP]
Application Name: reports
Error Message Id: BEA-101020
Description
Incident detected using watch rule "UncheckedException":
Watch time: Feb 25, 2011 11:28:52 AM CET
Watch ServerName: WLS_REPORTS
Watch RuleType: Log
Watch Rule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
Watch DomainName: ClassicDomain
Watch Data:
DATE : Feb 25, 2011 11:28:52 AM CET
SERVER : WLS_REPORTS
MESSAGE : [ServletContext@1326597641[app:reports module:/reports path:/reports spec-version:2.5 version:11.1.1.2.0]] Servlet failed with Exception
java.lang.NullPointerException
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:344)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM : HTTP
USERID : <WLS Kernel>
SEVERITY : Error
THREAD : [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'
MSGID : BEA-101020
MACHINE : <MachineName>
TXID :
CONTEXTID :
TIMESTAMP : 1298629732845
Stack Trace
java.lang.Throwable
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:231)
     at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
     at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
     at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
     at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
     at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
     at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
     at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
     at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
     at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
     at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
     at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
     at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
     at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
     at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Could you please help me in resolving the same ASAP.
Thanks,
Sandy.

Have a look at https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=1053674.1
Also had to change the $$Instance.oracle_home$$ variable in the rwnetwork.properties file to the actual directory.
Andre

Similar Messages

Error while opening report in Infoview

I am getting following error while opening report in Infoview.
Following is error generated in tomcat,
com.businessobjects.rebean.wi.ServerException: Cannot open document. Error during import. (DX0005)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:108)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:187)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
     at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Decode.openDocument(XMLviaRAS21Decode.java:537)
     at com.businessobjects.rebean.fc.internal.ras21.RAS21DocumentComAdapter.openDocument(RAS21DocumentComAdapter.java:69)
     at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:100)
     at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)
     at org.apache.jsp.viewers.cdz_005fadv.viewCDZDocument_jsp._jspService(viewCDZDocument_jsp.java:267)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.Exception: Cannot open document. Error during import. (DX0005) (80043746)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:100)
Please help me to resolve the above problem
Reagrds,
Ramesh

Hi Ramesh,
It may seem like a lot of information, but from a debugging perspective it doesn't tell us much.
You need to give some more info and even then it would probably be a good idea to call support.
Can you tell us;
Which version are you on?
Can you open de document from another desktop intelligence machine, not only the one that it was built on?
- This checks ; you can import the document; the structure of the document is fine (not corrupted).
Can you refresh the document on that other machine?
- This check ; the link to the universe is fine, the universe can be imported, the connection to the database is fine.
What is your preference as a BOE user to view Deski documents?
- Try a few others, so you know if the problem is with one type only (and which).
Now you will have a few more pointers more as to where the problem lies.
Even then it can be sheer size of the document, complexity of it, etc.
Good luck,
Marianne

Error while opening Cfolder URL Link.

Hi,
I get BSP error while opening cfolder URL link in BID Invitation Header data --> Document tab and click on the hyperlink for the cfolder.
Following is the BSP error.
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
BSP Exception: the Application Name area_de.htm in URL /cfolders/area_de.htm?p_col_id=4978E833838901C5000000000A200651&p_area_id=4978E834838901C5000000000A200651&p_role= is invalid.
Error type:
Your SAP Business Server Pages Team
Please help.
Thanks,
N M Poojari.

Hi,
You dont have the authorisation for going to cFolder.
Ask your BASIS guy to give the roles of SAP_CFX_CFOLDERS_ADMINISTRATOR or SAP_CFX_ADMINISTRATOR.
Regards,
Sachin

Error While Opening Reports IN OBIEE11g

Hi Experts,
I am getting the below error while opening the Reports in OBIEE. OBIEE 11g has been installed on the linux box .
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27004] Unresolved table: "Test2". (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Account"."Gen3,Account" FROM "Test2"')}
SQL Issued: SELECT "Account"."Gen3,Account" FROM "Test2"
Edit - Refresh
We have migrate the rpd , catalog and depolyed them on the new linux server from the windows server .All the services are up but while opening the reports it is showing the above error.
Thanks .

Another thing to consider is the data that your report contains. It's possible that the data within the report output contains special characters that are causing problems with the well-formedness of the XML.
I would look at this closely in a case where the reports were running fine and suddenly they stop. Especially if you have a pretty decent amount of DML traffic in the application.
Earl

RWI 00236 error while opening report in PDF mode

Hi All,
I'm getting the RWI 00236 error while the report is opened in PDF mode.I have searched on this error but couldn't got the answer so far.My report is quite a large one and i wont get any error while running simple reps.If this is something to do with temp files deletion at server side ,pls let me know which temp files needs to be deleted bcoz there quite few temp files at server level.Ofter getting this error msg ,the report browser hangs up and i needs to logout completely from infoview.
Im using BO X1r2 version and service pack is SP4.

Hi,
Are you able to open other reports in PDF Mode or not
If you are not able to open any report in PDF format then try to follow below mentioned steps.
1. Open Adobe Acrobat Reader. Click Edit > Preferences.
2. Click Internet in the Categories column of the Preferences property sheet.
3. Choose Display PDF in browser check box as shown below.
4. Click Ok, Adobe will reconfigure the setting, close Reader.
5. Now, when we view in pdf format in IE, we might see one message
6. So, when IE is launched, go to Tools>Manage Add-ons>Enable or Disable Add-ons and then enable
"Adobe PDF Reader Link Helper" add-on. Click Ok, restart IE.
Cheers,
Suresh Aluri.

Getting error while opening reports in EHS on portal

Hi,
I have deployed EHS Business package on portal. In the Industrial hygiene and safety role there is an iview "Standard Operating procedures". I am getting error
"Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: /global/services/java-iviews/com.sap.pct.ehs.reports.EHSReportGet." when i try to open any report on it. Can anybody please help me in this issue?

check the logs under httP://server:port/nwa-monitoring-logs and traces-sap logs
you can see the detailed description of the error

Error while opening report in pdf through OAF.

This is my first report through OAF and I followed a couple threads discussed on this but I am unable to debug this problem
Requirement - User clicks the image and is prompted to open/save pdf result file.It doesnt take any user parameters
Error is : I get prompted to open/save the pdf file . I click on Open or Save it and then Open, it gives me the following error :
'could not open because it either is not a supported file or because the file has been damaged(for example , it was sent as an email attachement and wasnt correctly decoded)'
Steps taken so far :
1. Created VO with query select a,b,c from Table A
2. Created a simple xml page, with a torch image : Set Action Type and Event property of the Torch Image Item to FireAction and GenerateReport
3. Wrote the code in CO and AM to get the data in XMLNode.
4. I did SOPs , copypasted the xml in notepad saved it as xml, loaded in MSWord and created a template.Viewing pdf generates a pdf here on this data
5. With "XML Publisher Administrator" Responsibility, I created Data Definition and Template Definition.
6. I deployed all the files on server and ran the report. It prompts me to open the pdf but it seems corrupted. In Jserv.log, xml gets printed through SOPs.
One thing I noticed is: <?xml version="1.0"?> is missing from xml.
please assist me , what am I missing here ?
Thanks a lot.
My CO code :
public class EmpCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
private static final String APP_NAME = "AK";
private static final String TEMPLATE_CODE = "Emp_Template";
private static final int BUFFER_SIZE = 32000;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModuleImpl am= (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
am.invokeMethod("initEmpVO");
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModuleImpl am= (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
String event = pageContext.getParameter("event");
if("GenerateReport".equals(event))
System.out.println("user clicked the pencil");
// Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
try {
ServletOutputStream os = response.getOutputStream();
// Set the Output Report File Name and Content Type
String contentDisposition = "attachment;filename=EmpReport.pdf";
response.setHeader("Content-Disposition",contentDisposition);
response.setContentType("application/pdf");
// Get the Data XML File as the XMLNode
XMLNode xmlNode = (XMLNode) am.invokeMethod("getEmpDataXML");
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
xmlNode.print(outputStream);
System.out.println(" xml data");
System.out.println(outputStream.toString()); //outputs the xml correctly
ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
System.out.println("1**");
ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
System.out.println("2**");
//Generate the PDF Report.
TemplateHelper.processTemplate(
((OADBTransactionImpl)am.getOADBTransaction()).getAppsContext(),// AppsContext
"AK",// Application short name of the template
TEMPLATE_CODE,// Template code of the template
"en", //language code of the template
"US",//Country Code
inputStream, //// XML data for the template
TemplateHelper.OUTPUT_TYPE_PDF,//Output type of processed document
null, //Properties
pdfFile); //OutputStream where the processed data goes
System.out.println("3**"); //doesnt print and goes in catch block
// Write the PDF Report to the HttpServletResponse object and flush.
byte[] b = pdfFile.toByteArray();
System.out.println("4**");
response.setContentLength(b.length);
System.out.println("5**");
os.write(b, 0, b.length);
System.out.println("6**");
os.flush();
System.out.println("7**");
os.close();
System.out.println("8**");
catch(Exception e)
System.out.println("9**");
response.setContentType("text/html");
throw new OAException(e.getMessage(), OAException.ERROR);
System.out.println("10**");
pageContext.setDocumentRendered(false);
System.out.println("11**");
///////////////------it prints only 1**, 2** and goes in catch block to print 9**
AM Code :
public void initEmpVO()
EmpVOImpl vo = getEmpVO1();
if(vo == null)
{ MessageToken errTokens[] = { new MessageToken("OBJECT_NAME", "EmpVO1") };
throw new OAException("AK", "FWK_TBX_OBJECT_NOT_FOUND", errTokens);
} else
{ vo.executeQuery(); }
public XMLNode getEmpDataXML()
OAViewObject vo = (OAViewObject)findViewObject("EmpVO1");
XMLNode xmlNode = (XMLNode) vo.writeXML(4, XMLInterface.XML_OPT_ALL_ROWS);
return xmlNode;
}

Hi,
Basically the reason for this is that your "PDF file" is not populated with the correct pdf structure that Adobe recognizes (i.e. save the file and look at it in notepad, you'll see it's probably in html or a java stack trace). 2 reason's this happens
1.You do not have the necessary library files attached to your project i.e. for XMLPublisher you will need $JAVA_TOP/oracle/apps/fnd/* and $JAVA_TOP/oracle/apps/xdo/*. Zip these up and add them to your libraries section of your project.
2. Your XML Publisher properties are not configured correctly. (usually causes a blank file) To change this go to (E-Business Suite>XML Publisher Administrator>Administration>General>Temporary Directory). Depending on what your doing you will need to point this to either a server location or a local location. i.e. when uploading defintion/template and previewing it requires a server-side location to generate a temporary file for the preview, when running a jdeveloper project it will look for a local directory to generate the temporary file. If it cannot find the directory it will throw an error to System.out, and send the HttpServletResponse container a 0bytes file. For local development on a windows box I suggest setting the "Temporary Directory" to something like "C:\oracle" and ensure that folder exists.
Hope this helps
Brad

Error while opening reports in PDF

Hi,
I have few reports which i open in PDF format. But when i try to open the report i get the following error message.
Adobe Reader could not open "file name.pdf" becasue it is either not a supported file type or because the file has been damaged(for example, it was sent as an email attachment and wasn't correctly decoded).
Earlier it was working fine, but today its not working.
Any help would be really appretiable.
Thanks,
-Amit

Another thing to consider is the data that your report contains. It's possible that the data within the report output contains special characters that are causing problems with the well-formedness of the XML.
I would look at this closely in a case where the reports were running fine and suddenly they stop. Especially if you have a pretty decent amount of DML traffic in the application.
Earl

Error while opening Application URL

Hi
I have developed an ADF application and applies FORM based security.It works fine and asking for login and only authorized users are able to access application. All well in integrated weblogic.
When I deploy this application on Managed server and admin server, none of the url works. IT works for admin server url if I use node one IP. We have two nodes.
I have enabled security in it and it redirects to login.html page first and then goes to main ADF page. but in this case its not redirecting to ADF page and throwing 401 error.
Everything is working fine in Integrated weblogic server.
Please help.
Thanks
Vibzz

Hi
Load balance issue I can understand but its not working on Admin server too. If I deploy it on Admin server it works fine with
http://adminServerIP:port/Context-root/faces/index.jspx but when I replace it with http://adminServerHOST:port/Context-root/faces/index.jspx it redirects to login.html page and once I login it gives below error:
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.
We have a simple jsp page and it works fine with admin server IP as well as post name. I am not able to identify why I am getting this error.
Any thoughts.

Error while opening Crytal report

Hi All ,
I am receiving the below error while opening reports .I am not able to open the crystal report.Tried uninstalling and reinstalling.But it dint worked.Can any one help me with this issue.Please find the error file attached.I am using SAP B1 9.0 PL06 and crystal report 2008

The best place to post your queries (and preferably it should be the developer posting the queries) will be:
SAP Business One Application SCN Space.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error while opening the BO report

Dear Experts,
Am getting following error while opening the reports through Xcelsius.You cannot amke a connection to the BusinessObjects web service ( LO 02010)
Failed to get the document information. (LO 26315)
Some objects are no longer available in the universe .See your BO admin ( Error : WIS 00001)
Actually am the BO administrator , Yesterday I 've changed license key for Xcelsius and BO Enterprise...

Hi ,
You can view the following URl ,which may be helpful for you.
Live office excel error
-Thanks,

Error while opening a report in FRstudio client machine.

Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
client laptop: 64bit windows7
hyperion version: 11.1.2.2
error msg:
"HARSnapin Initialize() Error -2147467259 - ; nested exception is:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
thanks

I've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
Regards
Celvin
http://www.orahyplabs.com

APEX 4.0: error while opening a XLS file downloaded from interactive report

Hi,
I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
"The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
Yes No Help
May be this one Apex 4.0 issue.
please help me.
Thanks
Mukesh

Hi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep

Error while opening XL reporter

Hi Experts,
I get following error while opening XL Reporter
Error! Server communication failed!
Cause: Error! Unable to get document!
Type: 36
Cause:XML document must have to top level element.
Tried it on several clients, Win XP, Win 7 but can not open XL Reporter
SAP Install is PL47 2007A
Any suggestions??
Gr, Mark

To get SAP repoter in windows 7
1)
XLR: "Report Initialize", (Error (666)), Automation Error
u2022     Error Messages
u2022     Reporting
u2022     XL Reporter
After installing XL Reporter, you may encounter these error messages when attempting to run a report from the SBO menu.
The following error messages occur because XL Reporter does not support .Net 2.0. More than likely you have installed .Net 2.0 for some other software and it is interfering with the execution of the XL Reporter program. SAP indicates that if you copy a certain file to the Excel Folder under your program files, it will correct the problem. Basically the file instructs the system to use .Net 1.1 instead of 2.0.
The SAP Service Note 918188 (SAP "S" number required) states that a file needs to be added to the root of the Excel folder. This folder is normally found under: C:\Program Files\Microsoft Office\
in a folder called something like EXCEL 10 or Excel 11. I am running two versions of Excel so I had to put the following file under the the following directory: C:\Program Files\Microsoft Office\Excel2003\OFFICE11
If you have access to the service site, then access the note mentioned above, and download the file. Otherwise, you will need to create your own.
Modify the file called "excel.exe.config" lines with the following contents:
supportedRuntime version="v1.1.4322"
supportedRuntime version="v1.0.3705"
requiredRuntime version="v1.0.3705"
2)
Regedit for the excel add-on
3)
Missing file - MetaInfo.xml (In SAP addon folder)

Error when opening report in Excel

Hi all,
I'm trying to import an answer (which I made in OBI) to an Excel via sheet (Via the OBI office plugin).
So what I do is:
- I navigate to the report I want to open
- I expand the report so I can see all the views
- I double click the view I want to open
After doing this, I get following error:
Error while opening workbook. Old format or invalid type library. (Exception from HRESULT: 0x80028018 (TYPE_E_INVDATAREAD))
Can any of you help me with this issue?
Thank you very much

Hi Srini,
Thanks for your reply, but -for the benefit of other readers- after some research we found that this issue seems to be caused by a Microsoft Office BUG, which is listed on their support website as Article ID 320369 ( BUG: "Old format or invalid type library" error when automating Excel )
The URL to access this article is: http://support.microsoft.com/kb/320369
Cheers!!

Error while opening Reports URL

Similar Messages

Maybe you are looking for