Error while parsing or executing XML-SQL document
friends,
my scenario is based on file to jdbc.i am facing an error in receiver CC in RWB.
The error states that '
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'MATMAS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]String or binary data would be truncated.'
My SOAP xml message is
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header>
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:TimeSent>2008-02-06T22:30:21Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>ECC</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>BS_JDBC</sap:Service>
</sap:Receiver>
<sap:Interface namespace="http://file_to_jdbc">MI_JDBC_RECEIVER</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
</sap:ReliableMessaging>
- <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">
sapecc50\sapmnt\trans</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">UTF-8</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">matmas1.txt</sap:Record>
</sap:DynamicConfiguration>
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
- <sap:Hop timeStamp="2008-02-06T22:30:21Z" wasRead="false">
<sap:Engine type="AE">af.e6e.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:Info />
</sap:Hop>
- <sap:Hop timeStamp="2008-02-06T22:30:21Z" wasRead="false">
<sap:Engine type="IS">is.01.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:Info>3.0</sap:Info>
</sap:Hop>
- <sap:Hop timeStamp="2008-02-06T22:30:22Z" wasRead="false">
<sap:Engine type="AE">af.e6e.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
</sap:Hop>
</sap:HopList>
- <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:TraceLevel>Information</sap:TraceLevel>
<sap:Logging>Off</sap:Logging>
</sap:Diagnostic>
</SOAP:Header>
- <SOAP:Body>
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
<sap:Name>MainDocument</sap:Name>
<sap:Description />
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
and payload message is
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_JDBC_RECEIVER xmlns:ns0="http://file_to_jdbc">
- <STATEMENT>
- <ROW action="INSERT">
<TABLE>MATMAS</TABLE>
- <access>
<MATNR>38</MATNR>
<MTART>HALB</MTART>
<MATKL>00107</MATKL>
<MEINS>pc</MEINS>
<ERSDA>2008.04.05</ERSDA>
<BRGEW>10</BRGEW>
<NTGEW>12</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>88</MATNR>
<MTART>FERT</MTART>
<MATKL>02004</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2008.04.05</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>13</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>89</MATNR>
<MTART>FERT</MTART>
<MATKL>02004</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2008.03.02</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>14</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>98</MATNR>
<MTART>HALB</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2006.09.01</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>12</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>170</MATNR>
<MTART>NLAG</MTART>
<MATKL>4</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2005.03.02</ERSDA>
<BRGEW>2</BRGEW>
<NTGEW>3</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>178</MATNR>
<MTART>NLAG</MTART>
<MATKL>4</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.03.06</ERSDA>
<BRGEW>3</BRGEW>
<NTGEW>4</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>188</MATNR>
<MTART>NLAG</MTART>
<MATKL>5</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.05.02</ERSDA>
<BRGEW>2</BRGEW>
<NTGEW>3</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>288</MATNR>
<MTART>HALB</MTART>
<MATKL>101</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2006.02.11</ERSDA>
<BRGEW>5</BRGEW>
<NTGEW>4</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>358</MATNR>
<MTART>HAWA</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.09.09</ERSDA>
<BRGEW>500</BRGEW>
<NTGEW>500</NTGEW>
<GEWEI>G</GEWEI>
</access>
- <access>
<MATNR>359</MATNR>
<MTART>HAWA</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.08.01</ERSDA>
<BRGEW>20</BRGEW>
<NTGEW>10</NTGEW>
<GEWEI>G</GEWEI>
</access>
</ROW>
</STATEMENT>
</ns0:MT_JDBC_RECEIVER>
Could anybody help me in sorting out this issue.My advance thanks
hi,
ypur structure is bad defined.
if you want to do an insert, the DT should be
<ns0:MT_JDBC_RECEIVER xmlns:ns0="http://file_to_jdbc">
___<StatementName>
______<dbTableName action=INSERT>
_____<table>MATMAS</table>
_______ <access>
___________<MATNR>38</MATNR>
___________<MTART>HALB</MTART>
___________<MATKL>00107</MATKL>
___________<MEINS>pc</MEINS>
___________<ERSDA>2008.04.05</ERSDA>
___________<BRGEW>10</BRGEW>
___________<NTGEW>12</NTGEW>
___________<GEWEI>KG</GEWEI>
______</access>
_____</dbTableName>
__ </StatementName>
</ns0:MT_JDBC_RECEIVER>
the ROW field is used when you wait receive data from DB for example you execute and SQL Query from Sender communication channel "SELECT name FROM TABLE Names"
so, the result of this query would be, for example:
<row>
____<name>joge</name>
</row>
<row>
____<name>pepe</name>
</row>
<row>
____<name>nicola</name>
</row>
See this link
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Feb 8, 2008 8:40 AM
Edited by: Rodrigo Pertierra on Feb 8, 2008 8:42 AM
Similar Messages
-
Error while parsing or executing XML-SQL document attribute "action" missin
Hi All,
I am doing a scenario for IDOC to JDBC, When I push IDOC from R/3 , IDOC sent to XI System successfully,
I have also checked in SXMB_MONI it is showing the successful staus without any errors, and I have also copied the xml structure from main document of payloads and tested the mapping in Integration Designer, and it is showing successfull message.
here is the xml structure from payloads of Request Message Mapping ........
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:RTACOGRP_RECEIVER_MT xmlns:ns0="http://prospecta.com/wsorta/cosmas/idoc2jdbc">
- <COGRP_TMP_PROC action="EXECUTE">
<IDOCNUMBER isInput="TRUE" type="CHAR">1000001</IDOCNUMBER>
<E1COGH_NUMBER isInput="TRUE" type="CHAR">1</E1COGH_NUMBER>
<E1COGH_HIGHERSEGMENT isInput="TRUE" type="CHAR">1</E1COGH_HIGHERSEGMENT>
<E1COGH_MSGFN isInput="TRUE" type="CHAR">1</E1COGH_MSGFN>
<E1COGH_GROUPTYPE isInput="TRUE" type="CHAR">1</E1COGH_GROUPTYPE>
<E1COGH_GROUPNAME isInput="TRUE" type="CHAR">1</E1COGH_GROUPNAME>
<E1COGH_KOKRS isInput="TRUE" type="CHAR">1</E1COGH_KOKRS>
<E1COGHT_NUMBER isInput="TRUE" type="CHAR">1</E1COGHT_NUMBER>
<E1COGHT_HIGHERSEGMENT isInput="TRUE" type="CHAR">2</E1COGHT_HIGHERSEGMENT>
<E1COGHT_LANGU isInput="TRUE" type="CHAR">2</E1COGHT_LANGU>
<E1COGHT_DESCRIPT isInput="TRUE" type="CHAR">2</E1COGHT_DESCRIPT>
<E1COGHT_LANGU_ISO isInput="TRUE" type="CHAR">2</E1COGHT_LANGU_ISO>
<E1COGV_NUMBER isInput="TRUE" type="CHAR">1</E1COGV_NUMBER>
<E1COGV_HIGHERSEGMENT isInput="TRUE" type="CHAR">3</E1COGV_HIGHERSEGMENT>
<E1COGV_FROMVALUE isInput="TRUE" type="CHAR">6</E1COGV_FROMVALUE>
<E1COGV_TOVALUE isInput="TRUE" type="CHAR">6</E1COGV_TOVALUE>
<E1COGS_NUMBER isInput="TRUE" type="CHAR">1</E1COGS_NUMBER>
<E1COGS_HIGHERSEGMENT isInput="TRUE" type="CHAR">5</E1COGS_HIGHERSEGMENT>
<E1COGS_SUBGROUP isInput="TRUE" type="CHAR">4</E1COGS_SUBGROUP>
<E1COGHR_NUMBER isInput="TRUE" type="CHAR">1</E1COGHR_NUMBER>
<E1COGHR_HIGHERSEGMENT isInput="TRUE" type="CHAR">6</E1COGHR_HIGHERSEGMENT>
<E1COGHR_SNAME isInput="TRUE" type="CHAR">3</E1COGHR_SNAME>
<E1COGHR_PRTCLASS isInput="TRUE" type="CHAR">3</E1COGHR_PRTCLASS>
<E1COGHR_AUTHGR isInput="TRUE" type="CHAR">3</E1COGHR_AUTHGR>
<E1COGSR_NUMBER isInput="TRUE" type="CHAR">1</E1COGSR_NUMBER>
<E1COGSR_HIGHERSEGMENT isInput="TRUE" type="CHAR">7</E1COGSR_HIGHERSEGMENT>
<E1COGSR_XSUPPRESS isInput="TRUE" type="CHAR">5</E1COGSR_XSUPPRESS>
<E1COGSR_PRTCLASS isInput="TRUE" type="CHAR">5</E1COGSR_PRTCLASS>
<E1COGSR_LNAME isInput="TRUE" type="CHAR">5</E1COGSR_LNAME>
<E1COGVT_NUMBER isInput="TRUE" type="CHAR">1</E1COGVT_NUMBER>
<E1COGVT_HIGHERSEGMENT isInput="TRUE" type="CHAR">9</E1COGVT_HIGHERSEGMENT>
<E1COGVT_LANGU isInput="TRUE" type="CHAR">7</E1COGVT_LANGU>
<E1COGVT_DESCRIPT isInput="TRUE" type="CHAR">7</E1COGVT_DESCRIPT>
<E1COGVT_LANGU_ISO isInput="TRUE" type="CHAR">7</E1COGVT_LANGU_ISO>
<E1COGVR_NUMBER isInput="TRUE" type="CHAR">1</E1COGVR_NUMBER>
<E1COGVR_HIGHERSEGMENT isInput="TRUE" type="CHAR">12</E1COGVR_HIGHERSEGMENT>
<E1COGVR_XSUPPRESS isInput="TRUE" type="CHAR">8</E1COGVR_XSUPPRESS>
<E1COGVR_PRTCLASS isInput="TRUE" type="CHAR">8</E1COGVR_PRTCLASS>
<E1COGVR_LNAME isInput="TRUE" type="CHAR">8</E1COGVR_LNAME>
</COGRP_TMP_PROC>
</ns0:RTACOGRP_RECEIVER_MT>
When I checked for component monitoring in runtime workbench....
these are the messages........
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)</i>
Here are the messages from message monitoring ......
2007-06-07 12:42:17 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2007-06-07 12:42:17 Success JDBC adapter receiver channel RTACOGRP_COM_Chan: processing started; party , service WSORTABS
2007-06-07 12:42:17 Error No "action" attribute found in XML document ("action" attribute missing or wrong XML structure)
2007-06-07 12:42:17 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
2007-06-07 12:42:17 Error Exception caught by adapter framework: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
2007-06-07 12:42:17 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure).
2007-06-07 12:42:17 Error The message status set to NDLV.
Can any body please resolve the problem.....
Thanks in Advance
MurthyBhavesh,
Now I have changed the data structure , and the resultant structure is like this...
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:RTACOGRP_RECEIVER_MT xmlns:ns0="http://prospecta.com/wsorta/cosmas/idoc2jdbc">
- <Statement>
- <COGRP_TMP_PROC action="EXECUTE">
<IDOCNUMBER isInput="TRUE" type="CHAR">100002223</IDOCNUMBER>
<E1COGH_NUMBER isInput="TRUE" type="CHAR">1</E1COGH_NUMBER>
<E1COGH_HIGHERSEGMENT isInput="TRUE" type="CHAR">1</E1COGH_HIGHERSEGMENT>
<E1COGH_MSGFN isInput="TRUE" type="CHAR">H</E1COGH_MSGFN>
<E1COGH_GROUPTYPE isInput="TRUE" type="CHAR">H</E1COGH_GROUPTYPE>
<E1COGH_GROUPNAME isInput="TRUE" type="CHAR">H</E1COGH_GROUPNAME>
<E1COGH_KOKRS isInput="TRUE" type="CHAR">H</E1COGH_KOKRS>
<E1COGHT_NUMBER isInput="TRUE" type="CHAR">1</E1COGHT_NUMBER>
<E1COGHT_HIGHERSEGMENT isInput="TRUE" type="CHAR">2</E1COGHT_HIGHERSEGMENT>
<E1COGHT_LANGU isInput="TRUE" type="CHAR">T</E1COGHT_LANGU>
<E1COGHT_DESCRIPT isInput="TRUE" type="CHAR">T</E1COGHT_DESCRIPT>
<E1COGHT_LANGU_ISO isInput="TRUE" type="CHAR">T</E1COGHT_LANGU_ISO>
<E1COGV_NUMBER isInput="TRUE" type="CHAR">1</E1COGV_NUMBER>
<E1COGV_HIGHERSEGMENT isInput="TRUE" type="CHAR">3</E1COGV_HIGHERSEGMENT>
<E1COGV_FROMVALUE isInput="TRUE" type="CHAR">V</E1COGV_FROMVALUE>
<E1COGV_TOVALUE isInput="TRUE" type="CHAR">V</E1COGV_TOVALUE>
<E1COGS_NUMBER isInput="TRUE" type="CHAR">1</E1COGS_NUMBER>
<E1COGS_HIGHERSEGMENT isInput="TRUE" type="CHAR">5</E1COGS_HIGHERSEGMENT>
<E1COGS_SUBGROUP isInput="TRUE" type="CHAR">S</E1COGS_SUBGROUP>
<E1COGHR_NUMBER isInput="TRUE" type="CHAR">1</E1COGHR_NUMBER>
<E1COGHR_HIGHERSEGMENT isInput="TRUE" type="CHAR">7</E1COGHR_HIGHERSEGMENT>
<E1COGHR_SNAME isInput="TRUE" type="CHAR">R</E1COGHR_SNAME>
<E1COGHR_PRTCLASS isInput="TRUE" type="CHAR">R</E1COGHR_PRTCLASS>
<E1COGHR_AUTHGR isInput="TRUE" type="CHAR">R</E1COGHR_AUTHGR>
<E1COGSR_NUMBER isInput="TRUE" type="CHAR">1</E1COGSR_NUMBER>
<E1COGSR_HIGHERSEGMENT isInput="TRUE" type="CHAR">8</E1COGSR_HIGHERSEGMENT>
<E1COGSR_XSUPPRESS isInput="TRUE" type="CHAR">S</E1COGSR_XSUPPRESS>
<E1COGSR_PRTCLASS isInput="TRUE" type="CHAR">S</E1COGSR_PRTCLASS>
<E1COGSR_LNAME isInput="TRUE" type="CHAR">S</E1COGSR_LNAME>
<E1COGVT_NUMBER isInput="TRUE" type="CHAR">1</E1COGVT_NUMBER>
<E1COGVT_HIGHERSEGMENT isInput="TRUE" type="CHAR">10</E1COGVT_HIGHERSEGMENT>
<E1COGVT_LANGU isInput="TRUE" type="CHAR">T</E1COGVT_LANGU>
<E1COGVT_DESCRIPT isInput="TRUE" type="CHAR">T</E1COGVT_DESCRIPT>
<E1COGVT_LANGU_ISO isInput="TRUE" type="CHAR">T</E1COGVT_LANGU_ISO>
<E1COGVR_NUMBER isInput="TRUE" type="CHAR">1</E1COGVR_NUMBER>
<E1COGVR_HIGHERSEGMENT isInput="TRUE" type="CHAR">11</E1COGVR_HIGHERSEGMENT>
<E1COGVR_XSUPPRESS isInput="TRUE" type="CHAR">E</E1COGVR_XSUPPRESS>
<E1COGVR_PRTCLASS isInput="TRUE" type="CHAR">E</E1COGVR_PRTCLASS>
<E1COGVR_LNAME isInput="TRUE" type="CHAR">E</E1COGVR_LNAME>
</COGRP_TMP_PROC>
</Statement>
</ns0:RTACOGRP_RECEIVER_MT>
Now in message monitoring error is showing like this...
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC' (structure 'Statement'): java.sql.SQLException: General error</i>
Now in Component Monitoring error is showing like this....
<i>Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC' (structure 'Statement'): java.sql.SQLException: General error</i>
I have tested the stored procedure in sql by giving the same values , it was successfully executed..
Can you please tell me where is the error still in structure ...
Thanks in Advance,
Murthy. -
Getting the following error while parsing the values usng xml parser
Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
-- PARSE INPUT FILE
FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
-- GET DOCUMENT
DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
LOAD_SUPP(doc);
ELSE
DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
AjeshBesides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers -
"Error while parsing SOAP XML payload: no element found" received when invoking Web Service
Running PB 12.1 Build 7000. Using Easysoap. Error ""Error while parsing SOAP XML payload: no element found" received when invoking Web Service". This error does not appear to be coming from the application code. Noticed that there were some erroneous characters showing up within the header portion of the XML ("&Quot;"). Not sure where these are coming from. When I do a find within the PB code for """" it gets located within two objects, whereas they both reference a "temp_xml_letter". Not sure where or what temp_xml_letter resides??? The developer of this is no longer with us and my exposure to WSDL and Web Services is rather limited. Need to get this resolved...please.
This is the result of the search. Notice the extraneous characters ("""):
dar1main.pbl(d_as400_mq_xml)
darlettr.pbl(d_email_xml)
---------- Search: Searching Target darwin for 'temp_xml' (9:52:41 AM)
---------- 2 Matches Found On "temp_xml":
dar1main.pbl(d_as400_mq_xml).d_as400_mq_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> number </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
darlettr.pbl(d_email_xml).d_email_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> imcnumber </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
---------- Done 2 Matches Found On "temp_xml":
---------- Finished Searching Target darwin for 'temp_xml' (9:52:41 AM)Maybe "extraneous" is an incorrect term. Apparantly, based upon the writeup within Wiki, the parser I am using does not interpret the """? How do I find which parser is being utilized and how to control it?
<<<
If the document is read by an XML parser that does not or cannot read external entities, then only the five built-in XML character entities (see above) can safely be used, although other entities may be used if they are declared in the internal DTD subset.
If the document is read by an XML parser that does read external entities, then the five built-in XML character entities can safely be used. The other 248 HTML character entities can be used as long as the XHTML DTD is accessible to the parser at the time the document is read. Other entities may also be used if they are declared in the internal DTD subset.
>>> -
SQL*Loader-925: Error while parsing a cursor (via ocisq)
Receiving the following error message when trying to use SQLLoader (on NT) >>>
SQL*Loader-925: Error while parsing a cursor
(via ocisq)
ORA-00942: table or view does not exist
Trying to use the application for the first time, logon using userid for which sqlplus operates, and the table does exist under the user schema, as owner.
ctl and dat file are correct. Log file gives me no further detail of the errors.
Are there any configuration settings or something required for this app?
ThanksThanks Warren. I was concentrating more on the first line of the error.
You are right. The issue was of insufficient privileges. The table did not have all the necessary grants provided. -
XML validation error while parsing MXI Manifest
Hi,
I have created an hybrid extension for Photoshop. I want to upload my extension on Adobe Exchange. during the upload process I get an error,
"XML validation error while parsing MXI Manifest: Declarations can only occur in the doctype declaration. Line: 19 Position: 791 Last 80 unconsumed characters".
The error description specifies that description in MXI file is not valid. Below are the contents of my MXI file.
<macromedia-extension
name="yyy"
id="com.yyy"
version="1.0.0"
type="object"
requires-restart="true">
<author name="abcd" />
<products>
<product familyname="Photoshop" maxversion="" primary="true" version="12.0"/>
</products>
<description>
<![CDATA[
<p><font size="14" color="black"><b>abcd</b> qwertyuioipafgjhkjljljklkjl
<br><br>
Open Extension via: Photoshop top menu > Window > Extensions > abcd.
<br><br>
Online support at: <a href="http://www.abcd.com/help.php">http://www.abcd.com/help.php</a></font></p>
<br>]]>
</description>
<ui-access>
</ui-access>
<license-agreement>
</license-agreement>
<files>
<file destination="$ExtensionSpecificEMStore/com.abcd/html/abcd.html" products="" source="zxp-support/Description/abcd.html"/>
<file destination="$ExtensionSpecificEMStore/com.abcd/html/abcd.png" products="" source="zxp-support/Description/abcd.png"/>
<file destination="" file-type="CSXS" products="" source="abcd.zxp"/>
<file destination="$automate" file-type="plugin" platform="mac" products="Photoshop" source="mac/abcd.plugin"/>
<file destination="$automate" file-type="plugin" platform="win" products="Photoshop32" source="win32/abcd.8li"/>
<file destination="$automate" file-type="plugin" platform="win" products="Photoshop64" source="win64/abcd.8li"/>
</files>
</macromedia-extension>
Can anyone please point out why am I getting the error?
ThanksHi CarlSun,
Thanks for the reply. I have made the changes suggested by you.
I have few queries:
1. Can we use attribute "source" in the description tag?
I have created a local html page and specified it in source attribute. but the Extension Manager CS6 did not render the local html page and displayed the following:
No description avaliable. Click the following link for more details.
"http://www.abcd.html". Is it possible to display a local html page in Extension Manager CS6?
2. Can I display an image (png) in CDATA under description tag? If yes, then can you please guide me how can I do so?
3. As suggested in tech notes MXI file must include UTF-8 encoding as header (<?xml version="1.0" encoding="UTF-8"?>). The MXI I am using does not have this header. Do I need to include the header?
Thanks -
Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
NSMutableDictionary *properties = [NSMutableDictionary dictionary];
[properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
[properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
[self.session createDocumentFromInputStream:inputStream
mimeType:@"image/png"
properties:properties
inFolder:salesOrderRouteMapFolderId
bytesExpected:[imageData length]
completionBlock:^(NSString *objectId, NSError *error) {
NSLog(@"Object id is %@",objectId);
if(error == nil) {
[inputStream close];
NSLog(@"Uploading Sales order route map successfully.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
} else {
[inputStream close];
NSLog(@"Uploading sales order route map failed.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
} progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
properties:(CMISProperties *)properties
contentInputStream:(NSInputStream *)contentInputStream
contentMimeType:(NSString *)contentMimeType
bytesExpected:(unsigned long long)bytesExpected
cmisRequest:(CMISRequest*)request
completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
// Validate param
if (link == nil) {
CMISLogError(@"Must provide link to send atom entry");
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
return;
// generate start and end XML
CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
writer.cmisProperties = properties;
writer.mimeType = contentMimeType;
NSString *xmlStart = [writer xmlStartElement];
NSString *xmlContentStart = [writer xmlContentStartElement];
NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
NSString *xmlContentEnd = [writer xmlContentEndElement];
NSString *xmlProperties = [writer xmlPropertiesElements];
NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
// The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
// the fly to support very large files.
[self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
httpMethod:httpRequestMethod
session:self.bindingSession
inputStream:contentInputStream
headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
bytesExpected:bytesExpected
cmisRequest:request
startData:startData
endData:endData
useBase64Encoding:YES
completionBlock:^(CMISHttpResponse *response, NSError *error) {
if (error) {
CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
if (completionBlock) {
completionBlock(nil, error);
} else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
if (completionBlock) {
NSError *parseError = nil;
CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
[atomEntryParser parseAndReturnError:&parseError];
if (parseError == nil) {
completionBlock(atomEntryParser.objectData, nil);
} else {
CMISLogError(@"Error while parsing response: %@", [parseError description]);
completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
} else {
CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip -
Error while parsing uri /portalAppTools/application
I am in the process of setting up WLP7.0 SP1 to run with Oracle (changed from
Pointbase).
When I try to access either my newly deployed portal or the admin application,
I am getting the following error:
Is this because I havent run the loadads and loaddocs scripts? (I have a seperate
problem running them)
Regards,
Nick
<16-Jan-03 23:58:45 GMT> <Info> <Data Synchronization> <000000> <Application:
portalApp; Data sync complete (OK) [DR: Master Data Repository]> <16-Jan-03 23:58:45
GMT> <Warning> <Webflow> <401201> <Webflow could not resolve a destination given:
appname [tools], namespace [admin_main], origin [begin], event [defaultEvent]
with request id [7604357]; Attempting to load Configuration-error-page.> <16-Jan-03
23:58:45 GMT> <Error> <Webflow> <401200> <Error while parsing uri /portalAppTools/application,
path null, query string namespace=admin_main
- Webflow XML does not exist, is not loaded properly, or you do not have a configuration-error-page
defined.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The configuration-error-page
node was not found in the webflow xml file. for webapp [tools], namespace [admin_main].
While trying to display CONFIGURATION ERROR: [Exception[com.bea.p13n.appflow.exception.ConfigurationException:
Bad Nam espace - namespace [admin_main] is not available for webflow execution.
Make sure the [admin_main.wf] file is deployed in webapp [tools].]],] at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurationError(WebflowExecutorImpl.java:859)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:556)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:491)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(RequestDispatcherImpl.java:341)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:116)
at jsp_servlet.__index._jspService(index.jsp:2)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>I am in the process of setting up WLP7.0 SP1 to run with Oracle (changed from
Pointbase).
When I try to access either my newly deployed portal or the admin application,
I am getting the following error:
Is this because I havent run the loadads and loaddocs scripts? (I have a seperate
problem running them)
Regards,
Nick
<16-Jan-03 23:58:45 GMT> <Info> <Data Synchronization> <000000> <Application:
portalApp; Data sync complete (OK) [DR: Master Data Repository]> <16-Jan-03 23:58:45
GMT> <Warning> <Webflow> <401201> <Webflow could not resolve a destination given:
appname [tools], namespace [admin_main], origin [begin], event [defaultEvent]
with request id [7604357]; Attempting to load Configuration-error-page.> <16-Jan-03
23:58:45 GMT> <Error> <Webflow> <401200> <Error while parsing uri /portalAppTools/application,
path null, query string namespace=admin_main
- Webflow XML does not exist, is not loaded properly, or you do not have a configuration-error-page
defined.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The configuration-error-page
node was not found in the webflow xml file. for webapp [tools], namespace [admin_main].
While trying to display CONFIGURATION ERROR: [Exception[com.bea.p13n.appflow.exception.ConfigurationException:
Bad Nam espace - namespace [admin_main] is not available for webflow execution.
Make sure the [admin_main.wf] file is deployed in webapp [tools].]],] at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurationError(WebflowExecutorImpl.java:859)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:556)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:491)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(RequestDispatcherImpl.java:341)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:116)
at jsp_servlet.__index._jspService(index.jsp:2)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
> -
SQL error 3113 occurred when executing EXEC SQL.
Hi,
We are facing one typical problem, One background is failing regularly with
below dump. as we now got all notes giving information, if database restarted
taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
in this two servers are located in different place, in this job tries to connect
another server to get material statistics.
It is giving some error message in sm21 with
SQL error 3113 occurred when executing EXEC SQL.
work procees in reconnect mode.
all notes saying these types of dump occur when database restared, but this dump
even though database is up.
below is short dump, please can anyone help me from this problem.
ABAP runtime errors DBIF_DSQL2_SQL_ERROR
Occurred on 08.01.2007 at 00:30:28
>> Short dump has not been completely stored. It is too big.
SQL error 3113 occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "AZ1".
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel#"
Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DBIF_DSQL2_SQL_ERROR"
"ZM2431216 " or "ZM2431216 "
"EXTRACT_GENERAL_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in th
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error o
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "essceu3"
Network address.......... "172.19.119.198"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C7ADBD4C00"
Database server.......... "ukblx176"
Database type............ "ORACLE"
Database name............ "EU3"
Database owner........... "SAPR3"
Character set............ "es_ES.ISO8859-1"
SAP kernel............... "46D"
Created on............... "Jul 9 2006 20:26:33"
Created in............... "AIX 1 5 00447C4A4C00"
Database version......... "OCI_920__OCI_7_API "
Patch level.............. "2257"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
5, , System build information:, , LCHN :
841480"
User, transaction...
Client.............. 600
User................ "MPZMMES"
Language key........ "S"
Transaction......... " "
Program............. "ZM2431216 "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZM2431216 " in
"EXTRACT_GENERAL_DATA".
The main program was "ZM2431216 ".
The termination occurred in line 980
of the source code of program "ZM2431216 " (when callin
The program "ZM2431216 " was started as a background jo
Source code extract
009500 mara.ntgew,
009510 mara.gewei,
009520 mara.volum,
009530 mara.voleh,
009540 mara.mstae,
009550 mara.mstde,
009560 mara.prdha,
009570 marc.matnr,
009580 marc.werks,
009590 marc.mmsta,
009600 marc.mmstd
009610 into :w_ops-groes,
009620 :w_ops-brgew,
009630 :w_ops-ntgew,
009640 :w_ops-gewei,
009650 :w_ops-volum,
009660 :w_ops-voleh,
009670 :w_ops-mstae,
009680 :w_ops-mstde,
009690 :w_ops-prdha,
009700 :w_ops-matnr,
009710 :w_ops-werks,
009720 :w_ops-mmsta,
009730 :w_ops-mmstd
009740 from sapr3.mara, sapr3.marc
009750 where sapr3.mara.mandt = sapr3.marc.mandt
009760 and sapr3.mara.matnr = sapr3.marc.matnr
009770 and sapr3.mara.mandt = :p_mandt
009780 and sapr3.mara.matnr = :w_ebs-matnr
009790 and sapr3.marc.werks = :p_owerks
> ENDEXEC.
009810 endform. " extract_general_data
009820 *&
009830 *& Form append_i_ops
009840 *&
009850 * Appends W_OPS to I_OPS
009860 *
009870 form append_i_ops.
009880 append w_ops to i_ops.
009890 endform. " append_i_ops
009900 *&
009910 *& Form extract_material_description
009920 *&
009930 * Extracts a Material Description from the remote database an
009940 * modifies the current record in I_OPS.
009950 *
009960 * >P_SPRAS Language Key
009970 *
009980 form extract_material_description using p_spras.
009990 EXEC sql performing set_langauge.
Contents of system fields
SY field contents..................... SY field contents............
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 18 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+..
W_EBS-PRAT4
2
0
W_OPS-GROES
22222222222222222222222222222222
00000000000000000000000000000000
W_OPS-BRGEW #######
0000000
000000C
W_OPS-NTGEW #######
0000000
000000C
regards,
krishnaiah.Hi,
This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM. The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
side memory or other resource problem, or a DLL version mismatch, but this is
unlikely.
Enlist the assistance of your DBA. Then reproduce the ORA-3113 error on your
client application. Ask your DBA to look at the database side Alert.log and
trace files and look for ANY activity. Any activity that coincides with your
ORA-3113 will be a clue.
REgards
Vinod -
Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S AnandError Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand -
Error While Installing IDES ECC6 with SQL Server 2005
Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade. -
Error while parsing SRVCTL output.
OS : Sun 5.10 SPARC Machine
DB :11.2.0.1 (Cluster Nodes)
On DB Control, while checking "Cluster Managed Database Services " getting below error.
Error while parsing SRVCTL output. Ensure that SRVCTL is functioning properly. I have checked the status of all the processes on that node, looks gsd process is down and in the db control log file getting below error .
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
2010-11-02 10:05:39,751 [Thread-42] ERROR db.rac parseStatusConfig.1010 - SrvctlDatabaseInfo.parseStatusConfig: no parsable status l
ines.
2010-11-02 10:38:50,440 [EMUI_10_38_49_/console/rac/racSitemap] WARN em.MetricEngine getCachedData.316 - Metric RAC_HOMETAB contain
s no cached data!
2010-11-02 10:38:51,260 [EMUI_10_38_49_/console/rac/racSitemap] WARN em.MetricEngine getCachedData.316 - Metric RAC_HOMETAB contain
s no cached data!
2010-11-02 10:39:11,514 [Thread-48] ERROR db.rac parseStatusConfig.1010 - SrvctlDatabaseInfo.parseStatusConfig: no parsable status l
ines.
What could be the issue ?what command did you execute?
does it work from the second node?
did you try rebooting the node?
did you check clusterware services? some of the processess may have not started properly or died ...
has it worked before ? or its a new installation ? -
IOException while parsing'ejb-jar.xml
Hi,
While I am building my project I am getting the below error. Please anybody help suggest me to overcome this problem.
[ejbjar] Unable to load dependency analyzer: org.apache.tools.ant.util.depend.bcel.FullAnalyzer - dependent class not found: org/apache/bcel/classfile/Visitor
[ejbjar] Could not resolve ( publicId: -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN, systemId: http://java.sun.com/dtd/ejb-jar_2_0.dtd) to a local entity
BUILD FAILED
IOException while parsing'ejb-jar.xml'. This probably indicates that the descriptor doesn't exist. Details: Connection timed out: connect
Regards,
SameerDo you have the appropriate bcel jar file in your path that includes org/apache/bcel/classfile/Visitor?
-
Excel service and OWA - getting ERROR while trying to open/edit Excel documents
Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
Trust level: Full
Application Virtual Path: /x
Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
Machine name: VHYDMANTHSTP-02
Process information:
Process ID: 1252
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: ArgumentException
Exception message: An entry with the same key already exists.
at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
Request path: /x/_layouts/xlpreview.aspx
User host address: 10.81.138.92
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 13
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176 -
IMAP error messages "Error while parsing IMAP response"
I'm getting thousands of IMAP errors every hour, can I shut those off?
My console log is flooded with them and it keeps me from seeing anything else
in the system log. The IMAP errors happen continuously while Mail.app is running.
It looks like debug output from Mail.app !?!
IMAP server is Beehive Server -- it's my company email so I need to use it.
Windows Outlook (Windows 7) shows no errors, possibly they're silently ignored
on Windows. My disk is writing almost continuously when Mail.appo is running.
Sample error: (thousands are generated per hour)
Apr 8 10:29:18 Js-Coolio-iMac.local Mail[22903]: Error while parsing IMAP response (null): Incomplete response
Remaining text: < Gian Luigi<br>>
Full text: < Gian Luigi<br>>
Any idea how to shut these off? I reinstalled Mavericks, no improvement as expected
since this seems to be Mail complaining about IMAP protocol issues.
Thanks in advance for any suggestions. And yes I've rebooted, reinstalled the IMAP account,
reinstalled Mavericks, etc.
Entrecheck follows...
Hardware Information:
iMac (27-inch, Late 2009)
iMac - model: iMac11,1
1 2.8 GHz Intel Core i7 CPU: 4 cores
12 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 9 days 20:39:45
Disk Information:
ST31000528ASQ disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (801.18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Seagate Backup+ Desk 3 TB
disk1s1 (disk1s1) <not mounted>: 209.7 MB
JOHN TM (disk1s2) /Volumes/JOHN TM: 2 TB (1.81 TB free)
LIU TM (disk1s3) /Volumes/LIU TM: 500 GB (203.45 GB free)
Untitled 3 (disk1s4) /Volumes/Untitled 3: 499.39 GB (498.94 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Griffin Technology, Inc iMic USB audio system
Apple, Inc. Keyboard Hub
Logitech USB Trackball
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 4
Kernel Extensions:
com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5)
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.barebones.textwrangler.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] net.culater.SIMBL.Agent.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.leadertech.PowerRegister.SEA1.7c77b2ab072a21a06107fccae868ff4b.plist 3rd-Party support link
[not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
User Login Items:
Flux
smcFanControl
SpeechSynthesisServer
AdobeResourceSynchronizer
Flux (13.0)
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 3rd-Party support link
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
RealPlayer Plugin: Version: (null) 3rd-Party support link
AdobePDFViewerNPAPI: Version: 10.1.3 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
MRJPlugin: Version: 1.0-JEP-0.9.0 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 10.1.3 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
Ghostery: Version: 5.1.0
AdBlock: Version: 2.6.18
Turn Off the Lights: Version: 2.3.0.5
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx: Version: 1.0 3rd-Party support link
WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
RCDefaultApp
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Java 3rd-Party support link
MenuMeters 3rd-Party support link
Old Applications:
asannotation2: Version: 10.21.26.0 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/924/asannotation2.app
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/1224/convertpdf/convertpdf.app
Neverwinter Nights 2: Version: 1.23.1765 - SDK 10.5 3rd-Party support link
Amazon MP3 Downloader: Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
TurboTax Deluxe 2011: Version: 2011.r17.007 - SDK 10.4 3rd-Party support link
Ventrilo: Version: 3.0.13 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/1224
Cisco WebEx Meeting Center: Version: 1207.04.2732.10 - SDK 10.5 3rd-Party support link
asannotation2: Version: 8.25.31.0 - SDK 10.5 3rd-Party support link
atmsupload: Version: 4.14.29.0 - SDK 10.5 3rd-Party support link
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 184.55 GB
Destinations:
JOHN TM [Local] (Last used)
Total size: 2
Total number of backups: 51
Oldest backup: 2014-01-09 05:11:53 +0000
Last backup: 2014-04-04 08:40:29 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 184.55 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% EtreCheck
0% SystemUIServer
0% com.apple.WebKit.Networking
0% softwareupdated
Top Processes by Memory:
344 MB Safari
258 MB mds_stores
258 MB com.apple.IconServicesAgent
172 MB softwareupdated
172 MB soffice
Virtual Memory Information:
3.05 GB Free RAM
5.12 GB Active RAM
2.71 GB Inactive RAM
1.05 GB Wired RAM
7.04 GB Page-ins
15 MB Page-outstry Mail is not syncing an imap account correctly
(https://discussions.apple.com/message/21904088#21904088) , it just worked for me.
Maybe you are looking for
-
How to call SAP query in a program
Hi experts I have created a query in SQVI its gives a result. Now i want this query to be used in my program. Is there any FM which gets the quary name and populates the result in iternal table. So that i can use that result. I know without quer
-
HT1849 My "completed album" is not showing all the songs I purchased.
I "completed my album" and it downloaded the songs I did not yet have. But the songs that the iTunes store says I have already purchased are in an EP and they are not showing up as part of the full length album. How can I get them to list in the full
-
Recursive functions in Oracle SQL.
OK, Here is the pivot problem. Only this time were on an Oracle 11.1.0.7.0. I've created a table called: CREATE TABLE STAGING.MY_TAB_COLS TABLE_NAME VARCHAR2(30 BYTE), COLUMN_NAME VARCHAR2(30 BYTE) )And I've put the following data into it: Ins
-
Hi I want to update my 3110 classic phone, but I'm not sure if I will lose the Norwegian language on it. I've bought it online. Is there anywhere I can verify which language my product code supports?
-
I just installed Logic Express and I can't seem to get the audio to work. I'm using a Tascam US-122 to channel all the inputs and outputs. The signals are all there, but no sound. Everything worked fine with garage band, so I'm assuming it's a Logic