Error while passing data to custom screen. Entry MUM doesn't exist in T001P
Dear All,
I have created a custom screen for PB10. I am getting below error while executing the screen.
Entry MUM doesn't exist in T001P (Check Entry) .
The detail error is
Entry MUM does not exist in T001P (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table T001P. The value or values ' MUM ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
I've checked the table and data is available. But still i am getting this error.
I've come across this error earlier while copying standard screen to custom screen.
The solution to this problem is you have to set your SET and GET parameter in the properties tab of the field.
regards,
sandeep
Similar Messages
-
Error while passing date parameters in procedure and commit issue
Hi
1) I am doing a archiveing records and pls find my code below and i have couple of issue,pls find my code and want to ensure the commit is happening every 100000 rows inserted but i am archeiving a huge table but when i checks the table frequently it shows 0 records and after it shows count the actual rows around 20 million records.How can i ensure it commiting on every 100000 records. pls find my code my db version is 10g on windows
CREATE OR REPLACE PROCEDURE doins as
cnt number:=0;
FOR x IN (select * from Call_log
where trunc(c_date) = to_date('11-Aug-2008','DD-MON-YYYY'))
LOOP
INSERT INTO call_arch
select * from Call_log
where trunc(c_date) = to_date('11-Aug-2008','DD-MON-YYYY');
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
2) Error while passing date as parameter i am getting following errors while passing date parameter pls find my code and errors
CREATE OR REPLACE PROCEDURE doins(p_date date) as
cnt number:=0;
begin
FOR x IN (select * from Call_log
where trunc(c_date) = to_char(p_date,'DD-MON-YYYY'))
LOOP
INSERT INTO call_arch
select * from Call_log
where trunc(c_date) = to_char(p_date,'DD-MON-YYYY');
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
end;
exec doins(11-Aug-2008) then gives
SQL> exec doins(11-Aug-2008);
BEGIN doins(11-Aug-2008); END;
ERROR at line 1:
ORA-06550: line 1, column 16:
PLS-00201: identifier 'AUG' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
if i gave exec doins(11-08-2008) it gaves
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'DOINS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
rgds
roshCREATE OR REPLACE PROCEDURE doins(p_date varchar2) as
cnt number:=0;
begin
FOR x IN (select A.rowid,A.* from Call_log A
where trunc(c_date) = to_date(p_date,'DD-MON-YYYY'))
--hope that's c_date columne is DATE datatype
LOOP
INSERT INTO call_arch
select * from Call_log
where rowid=x.rowid;
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
end;
thats your correct procedure - but NOT CORRECT ISSUE.
You should use bulk collect with limit clause and forall clause to do it faster!!! Or Merge clause. -
Error while passing file from webdynpro screen to DMS server to gene DMS no
hello gurus,
i have one requirement in webdynpro abap.i need somme stuff to achive this.let me explain my requirement first.
i have one view as main having file upload UI element and one action button as CREATE. now i perform browse and selected one file . now i am going to perform action on that create button it is should generate one DMS document number against the selected file and strore this file in DMS storage location.for this i have used 'BAPI_DOCUMENT_CREATE2' bapi inside Action of CREATE BUTTON. but it is showing error like 'Error while checking in and storing: D:\file1.doc'
TYPE E
ID 26
NUMBER 253
MESSAGE Error while checking in and storing: D:\file1.doc
but when i am executing the BAPI 'BAPI_DOCUMENT_CREATE2' directly while passing the same data to bapi it is generating the document number perfectly.
i am new for this webdynpro could you please suggest me how can i overcome this problem.
regards.
babu.Hi,
This is not error with respect to WD. you can check same problem in thread Error while checking in and storing: C:Userscbt.abapDesktopLOP.XLS
I guess this will solve your problem.
Thanks,
Chandra -
Error while passing date parameter to the XML data definition
Hi All,
I have developed a BI publisher report using XML data definition & RTF template.
This data definition contains a SQL query in it's CDATA section and runs as a concurrent program(without RDF) . We are looking to pass a date parameter to the SQL query and its not accepting the date parameter. However, when we hardcode SYSDATE in the SQL query in place of the parameter, the report runs fine. In the log file it shows that the parameter is being treated in American date style and we are using DD-MON-RRRR format. I have tried to convert the date format however still the error exists.
What we did ?
Created a XML data definition which contains the SQL query in its CDATA section & p_rundate (DATE) parameter.
Registerd the XML data definition as concurrent program with EXECUTABLE= XDODTEXE and Output format as XML with p_date as a date parameter.
Looking for any available solution for the same.
Thanks.Hi All,
I have developed a BI publisher report using XML data definition & RTF template.
This data definition contains a SQL query in it's CDATA section and runs as a concurrent program(without RDF) . We are looking to pass a date parameter to the SQL query and its not accepting the date parameter. However, when we hardcode SYSDATE in the SQL query in place of the parameter, the report runs fine. In the log file it shows that the parameter is being treated in American date style and we are using DD-MON-RRRR format. I have tried to convert the date format however still the error exists.
What we did ?
Created a XML data definition which contains the SQL query in its CDATA section & p_rundate (DATE) parameter.
Registerd the XML data definition as concurrent program with EXECUTABLE= XDODTEXE and Output format as XML with p_date as a date parameter.
Looking for any available solution for the same.
Thanks. -
Error:Check table 158:entry COR6N doesn't exist
Dear PP Gurus
When i am trying to do confirmation( COR6N) an error is coming "<b>Check table 158:entry COR6N doesn't exist</b>".
Can u pls suggest why this is happening...........???
Regards
RageshDear Padosh/Murugesh
By mistake...i had given full points...
Mr Pradosh only first suggested that sol'n, so Murugesh i have given to u vry helpful answer
Regards
Ragesh
null -
Error while saving date value in Java dictionary
Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
BhavikHi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: <b>target_date</b>
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
int l_year;
int l_month;
int l_days;
l_year = target_Date.getYear();
l_month = target_Date.getMonth();
l_days = target_Date.getDate();
Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik -
Passing data to multiple screens through SAP webgui;
Hello, I'm working on building an application that requires me to pass data to multiple screens of a SAP transaction (IW31) through SAP webgui. The requirement is to enter the required information in the initial screen, "Header data" screen and in the "Object Data" screen. I'm using the below URL to launch the webgui:
http://myserver:8001/sap/bc/gui/sap/its/webgui/!?sap-client=800&sap-user=xxx&sap-password=yyy&sap-language=EN&transaction=iw31%20CAUFVD-EQUNR=20006001&AUFPAR-PM_AUFART=PM01&CAUFVD-GSBER=0001&OKCODE=/00&CAUFVD-ILART=103&~OKCODE==IOLU
This is failing with the following error message:
*Flow control: Entry SAPLCOIH, IOLU, A0, * , * , * is missing in T185*
I also noticed that if I stop at the point where I enter information in the initial screen and enter into the header data page using the below URL, it is working fine. The URL used is
http://myserver:8001/sap/bc/gui/sap/its/webgui/!?sap-client=800&sap-user=xxx&sap-password=yyy&sap-language=EN&transaction=iw31%20CAUFVD-EQUNR=20006001&AUFPAR-PM_AUFART=PM01&CAUFVD-GSBER=0001&OKCODE=/00
Can anyone please explain what is incorrect in the URL I'm passing?
Thanks in advanceHi Vijay,
Thank you for your prompt response but I do not understand your answer or perhaps I am not makig myself clear.
Let me explain the current process:
1) Z program collects data and exports to Memory ID 'TEST01'.
2) Z program calls SAP program
3) SAP program calls User Exit '001' and data is read from Memory ID 'TEST01'.
4) SAP program collects some of the data and then executes SAP FM to continue processing.
5) SAP FM Executes User Exit for FM and data is read from Memory ID 'TEST01'.
6) SAP FM returns completed data back to SAP main program.
7) Z Program collects results from SAP program.
New process:
1) Z program collects data and exports to Memory ID 'TEST01'. Data now includes filter for CC.
2) Z program calls SAP program
3) SAP program calls User Exit '001' and data is read from Memory ID 'TEST01'.
4) SAP program collects some of the data and then executes SAP FM IN PARALLEL PROCESSING to continue processing.
5) SAP FM Executes User Exit for FM and an attempt to read data is read from Memory ID 'TEST01' fails.
6) SAP FM returns completed data back to SAP main program.
7) Z Program collects results from SAP program.
The dilemma is how to capture the proper CC filter in the FM exit when SAP is unable to read the data from memory ID 'TEST01'. I guess I can understand this since the tasks are executed in separate sessions and servers from the one that started the program since we are using a server group.
Perhaps I am missing something with respect to exporting to memory IDs?
Thanks. -
'Error while signing data-Private key or certificate of signer not availabl
Hello All,
In my message mapping I need to call a web service to which I need to send a field value consist of SIGNED DATA.
I am using SAP SSF API to read the certificate stored in NWA and Signing the Data as explained in
http://help.sap.com/saphelp_nw04/helpdata/en/a4/d0201854fb6a4cb9545892b49d4851/frameset.htm,
when I have tested using Test tab of message mapping it is working fine and I am able to access the certificate Keystore of NWA(we have created a keystore view and keystore entry to store the certificate) and generate the signed data ,but when I test end to end scenario from ECC system,it is getting failed in mapping with the error
' Error while signing data - Private key or certificate of signer not availableu2019.
Appreciate your expert help to resolve this issue urgently please.
Regards,
ShivkumarHi Shivkuar,
Could you please let me know how you were trying to achieve the XML signature.
We have a requirement where we have to sign the XML document and need to generate the target document as following structure.
<Signature>
<SignedInfo>
<CanonicalizationMethod />
<SignatureMethod />
<Reference>
<Transforms>
<DigestMethod>
<DigestValue>
</Reference>
<Reference /> etc.
</SignedInfo>
<SignatureValue />
<KeyInfo />
<Object>ACTUAL PAYLOAD</Object>
</Signature>
I am analyzing the possibility of using the approach that is given in the help sap link that you have posted above. Any inputs will be apprecited.
Thanks and Regards,
Sami. -
Error While entering data in VA01
Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi -
Invalid character error while activating data in DSO.
Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoopHi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
data: l_d_length like sy-index,
l_d_char type c,
l_d_index type sy-index,
l oopx like sy-tabix.
data : xinfobj(30) type c value 'RABC'. -> this is ur infoobject name
clear : result.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = tran_strucutre-XYZ -> object name in ur structure
importing
output = result.
l_d_length = strlen( result ).
do l_d_length times.
l_d_index = sy-index - 1.
l_d_char = result+l_d_index(1).
call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
exporting
i_chavl = l_d_char
i_iobjnm = xinfobj
I_S_COB_PRO =
I_T_COB_PRO_CMP =
exceptions
chavl_not_allowed = 1
others = 2
if sy-subrc <> 0.
result+l_d_index(1) = ' '.
endif.
enddo.
Regards;
Jitendra -
Hi Experts,
i am new to the SRM, i am facing problem in passing data from one screen to another.
my requirement is that when we select one shopping cart and press the PROPOSE SOURCES OF SUPPLY button, we will fetch all the contracts that are attached to the shopping cart.
we have implemented a BADI implementation of BBP_SOS_BADI (method BBP_SOS_CHECK) for passing some changed values to the contracts of the shopping cart into the popup screen that is displayed when we press PROPOSE SOURCES OF SUPPLY button and when we select any contract and press ASSIGN ONLY button in the popup screen the badi BBP_DOC_CHANGE_BADI is triggered.
i have implemented another BADI implementation of BBP_DOC_CHANGE_BADI for fetching the selected contract and pass the values to another screen, but the problem is that when we select one contract and press the assign only button we are fetching the wrong contract number ( that is in the BADI method BB_SC_CHANGE parameter IT_ITEM we are fetching the wrong contract), if we again do the same procedure for the second time we are getting the correct contract.
i am unable to understand why we are getting the wrong contract in the first time( that is we are getting contract other than the selected one).
as per my understanding i think when we are passing data to the popup screen using BBP_DOC_CHANGE_BADI we are not updating the shopping cart with the changed data.
can anyone tell me how we can update the SHOPPING CART with the changed contracts data, i have used BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE and other shopping cart FM but nothing is happening.
Thanks
TanveerHello,
What version of SRM are you on? Have you check for OSS Notes? I have had trouble with BBP_DOC_CHANGE_BADI but it was because of other issues. The BADI works pretty well and it is called almost every time something happens to the shopping cart.
I have noticed that sometimes that values are not changed til the second calling of the BADI. I have yet understand why but I think it has to do with prompt processing. Usually, we train our requisitioners to click the 'Check' button to flush things out.
I don't know if I was helpful.... another thought.... could there be an error caught by BBP_DOC_CHECK_BADI that is preventing change in BBP_DOC_CHANGE_BADI?
Regards, Dean. -
Error while insert data using execute immediate in dynamic table in oracle
Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically. -
Error while updating data from PSA to ODS
Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo -
Error while generating Data provider
We are facing a weird issue while using Design Studio 1.2. Locally the tool works fine but when we use it from BI-Launchpad or through BI Enterprise it gives intermittent error "Error while generating Data Provider"
Same setup works fine in our Validation Environment.
We have tried running repair for Design Studio, redeploy the war files, creating new view but issue still exist.
We have BI 4.0 SP7 installed on Windows 2008 R2 system.
4 CMS running in cluster, Design Studio 1.2 is installed on 3 Nodes out of 4.
For now we are using 1 tomcat to access the system to narrow down the issue.
Experts please help us to resolve this issue.
Attach is the error message we are receivingI am not clear what your data source is, but I recommend checking the PAM https://websmp102.sap-ag.de/~sapidb/011000358700001013822013E because there are some limitations with Design Studio and BI4.0
-
Error while selecting date from external table
Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2 SE_CUST_ID NUMBER(38),
3 SE_TRAN_AMT_LCY FLOAT(126),
4 SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6 TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY ext_tables
8 ACCESS PARAMETERS (
9 RECORDS DELIMITED BY NEWLINE
10 FIELDS TERMINATED BY ','
11 MISSING FIELD VALUES ARE NULL
12 (
13 country_code CHAR(5),
14 country_name CHAR(50),
15 country_language CHAR(50)
16 )
17 )
18 LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --
Maybe you are looking for
-
Adaptive RFC 2 gives error: com/sap/ide/jco/service/internal/R3Service
Hi, I've run into the following problem about NWDS. This happens as I create a Model. It appears there is a new version of the Adaptive RFC Model, which is called Adaptive RFC 2 Model. 1. Right click on Models, and select Create. 2. Double Click on A
-
I only know to delete emails I want to discard, after search and finding hundreds, by the page (up to 50). How can I delete all at one time, to save me hours of tedious work?
-
Hi All, I have developed an application in Swing that uses JTabbedPane.The tabbed pane(say tabbedpane X),has a panel which is in turn made from 2 panels,say panel A and panel B. I want to display the space beween the 2 panels,A and B by using the Set
-
I am having issues doing my extraction from SAP into the SQL Database. The client requirement for fields are: pernr, Name, Cost Center #, Org unit # and name, and Position. In the Table Details Portion of the Configure SAPExtractor, I selected the
-
I am a little unclear how the data plans work with AT&T. I rarely have a need for a data plan, not even once a month, but I would like to have it available for when I do need it as inexpensive as possible. So here are a couple questions I have. If I