Error while posting GR with MvT 835 for Brazil Plant using transaction MBSU

Hi,
While posting GR with MvT 835 through transaction MBSU with reference to GI document, we are receiving below error :-
Balance not zero: **** - debit: ****
credit: ****
Message No.: M7050.
We are using TAXBRA procedure for Brazil.
We request you to please let us know what all configuration do we need to check.
Regards,
Kiran

Answered.

Similar Messages

  • Error while posting to Tax Journal Entry for sales and use tax

    Hi,
    I am trying to post a journal entry (FB50) to cleanup and correct the liability on our sales and use tax. All  lines are giving warnings and messages.Give me a suggestion  on how to get it to post .  Or if needed, another solution to correcting the balances in the sales and use taxes.
    But the entry to a/c # 226530 is giving an information message but still wouldnu2019t save.
    The Error message is
    Enter the tax base amounts for account 226400 in company codeAFCO
    Message no. F5A375
    Diagnosis
    You are posting directly to a tax account. Enter the tax base amounts per item using the function "Tax Amounts".
    Kindly help me how to fix the above issue.
    Thanks
    Suvarna

    You may want to check out the following notes... they may shed some light on your problem.
    681930 - Posting on tax account possible w/o specific. of base amount
    1090096 - FB60 / MIRO - Checking direct tax after change (F5A375)
    944978 - FB60 / MIRO - check of direct tax after change

  • Error while executing Initialize with Data Transfer for 0FI_GL_10

    Hello All,
    Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
    First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
    We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
    The issue now is we are getting the following error message while running INIT with data transfer.
    Job terminated in source system --> Request set to red
    Message no. RSM078
    We have copied the data till July 1st week of 2011.
    Please advice. The issue is very critical.
    Thanks & Regards
    Sneha

    Hi Arvind
    Thanks for your inputs.
    Please find below the details of the short dump.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          09/07/2011 11:25:32
    Short text
         SQL error in the database when accessing a table.
    What can you do?
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    How to correct the error
         Database error text........: "ORA-01652: unable to extend temp segment by 128
          in tablespace PSAPTEMP"
         Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
         Please check the entries in the system log (Transaction SM21).
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    Information on where terminated
        Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
         "FETCH_TO_ISTRUCTURE".
        The main program was "SBIE0001 ".
        In the source code you have the termination point in line 903
        of the (Include) program "GP_GLX_FAGLFLEXT".
        The program "GP_GLX_FAGLFLEXT" was started as a background job.
        Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
        Job Initiator.. "BIWREMOTE"
        Job Number..... 11203300
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
         nor declared
        in the RAISING clause of its signature.
        The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
        840 of the (Include program "GP_GLX_FAGLFLEXT ".

  • Error while posting Customer with Multiple sales areas using DEBMAS05.

    Dear experts,
    We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05.  we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error:  "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created!  The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
    As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization).  OSS Note (384462)  provides further details about this. One Important point from the note is: 
    "As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
    Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
    For your customers, contact persons exist to which a private address or a different business address is assigned.".
    This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
    If someone have experienced the same issue before and have found a solution to it, kindly help out.

    I have found the cause and solution to this problem.
    This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
    This was resolved by splitting the IDOC into 2.
    The solution is to First post only the KNA1 segment and create the customer.
    In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”:  you would have got the KUNNR after the first step.
    Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC. 
    I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
    Cheers
    Venkat

  • Error while posting data with BAPI_ACC_ACTIVITY_ALLOC_POST

    Hi All
    I am using BAPI_ACC_ACTIVITY_ALLOC_POST to post documents but getting error as 'The document has too many line items (maximum number = 997). Even though my input file has only 900 records.
    I tried reducing it to 600 . Even then I am getting same error.
    Has anybody come across this , message class BK (829).
    I have traced that this message comes from function module  K40C_DOCUMENT_CREATE which is being called internally in the BAPI.
    Please help me on this , its urgent.
    Thanks & Regards
    Babita Sharma

    Change your code to create 400 line items for each document number. I mean, 1 header for 400 line items.
    That way you will have one structure HEADER and 400 lines in table ITEMS.
    RMS.

  • Error while posting 561 Document

    Dear All
                Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
    Even OBYC setting for that valuation class already assigned.
    please advice.
    Regards
    Kumar.

    Hello Anandhakumar ,
    please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
    and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
    it could solve your query.
    regards,
    Ninad Kshirsagar

  • Error while posting IDoc

    Hi,
    i am getting the following error while posting an IDoc: Program parameters for LS XXXXXXXX 2002 have not been set. Please suggest what can be the possible reason for it and the probable solution.

    First ,
    check the partner profiles in R3,
    i.e. a logical system is defined for XI , particluar Message type is added on inbond side and selected the releavnt messge type and and process code. this is all in WE20.
    defining a logical system is in SALE.
    then ditribute u r the model in BD 64
    once every thing is OK in R3
    on PI.
    create a RFC destination of type R3 which points to R3 , try remote log-on .
    this will be used in receiver chaneel
    and check u r receiver chaneel is defined under Business system of R3, and BS refers to same client where partner profiles are defined.
    and one of the following should be in place.
    check 'apply control record from payload' if ur explictly passing Control record from mapping
    otherwise,
    check sender service and receiver service in Receiver agreement and select appropriate systems.
    Regds,
    Suresh

  • Error while posting a write up for asset belonging to affiliated company

    Hi,
    I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
    Transaction type 790 not possible (posting to affiliated company)
    Message no. AA390
    I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
    Thanks
    Pragya

    Hi
    According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
    but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
    Is there any other way, to resolve the issue
    Thanks
    Pragya

  • Error while posting batch managed stock in 107 movement type?

    Hi All,
    Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
    and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
    regards,
    Sanjana

    Hi,
    spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
    107     SGTXT
    107     WEMPF
    Check here 107 mvt type there or not if not then put.
    101     CUSTNAME
    101     GRUND
    101     SGTXT
    101     WEMPF
    102     SGTXT
    102     WEMPF
    103     SGTXT
    103     WEMPF
    104     SGTXT
    104     WEMPF
    105     SGTXT
    105     WEMPF
    106     SGTXT
    106     WEMPF
    107     SGTXT
    107     WEMPF
    108     SGTXT
    108     WEMPF
    109     SGTXT
    109     WEMPF
    110     SGTXT
    110     WEMPF
    Regards
    Rakesh

  • Error while posting depot excise invoice

    Dear SAP Experts,
    We are continually facing the following error while posting "Depot
    Excise Invoice" on Production sever
    "Error in allocating Depot Invoice number interval not found Number
    object J_1IDEPINV"
    Message no is 8I336
    We have already maintained the number interval for the above object i.e
    J_1IDEPINV with respective series group 62.
    Here is the business process:
    1. First, we make transfer posting thr’ MB1B. We get material doc no
    2. Second, we make selection for RG23D for this material doc thr’ J1IJ.
    RG 23D register gets updated
    3. Third, we make ‘verify/post’ thr’ J1IJ itself. Here we are getting the
    error when we post it.
    Please do needful.
    Its an urgent isue
    Regards
    Tushar

    hello,
    In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
    Regards
    Kedar Kulkarni

  • Incoming payment by F-28: Reason code error while posting

    Hello everyone,
    I want to post Incoing Payment using F-28 net of TDS. I want the separate GL account to be picked up automatically for the difference when I enter the Reason Code 003.
    I did the following customization for the same.
    1. Financial Accounting> Accounts Receivable and Accounts Payable> Business Transactions>Incoimng Payments> Incoming Payments Global Settings>Overpayment/Underpayment> Define Reason Codes:- Here I selected the Indicator 'C' for reason code 003 which is for "Indicator: Charge off difference via separate account". The reason code 003 is for TDS Netted
    2. Below the Define Reason Code node, I selected the node 'Define Accounts for Payment Differences' . Selected the key ' Rules' and selected the checkbox 'Reason Code'. Then clicked on 'Accounts' and enetered the desired GL account against the reason code '003'.
    After doing the above customization I posted the Incoming payment using T code F-28. I entered the difference in the field 'Difference Posting'. Then entered reason code '003' which is for 'TDS netted' in the field 'Reason Code'. Now, I am getting the follwoing error.
    Reason codes with automatic charge-off are not permitted here
    Message no. F5605
    Diagnosis
    The reason code entered is designed to ensure that the payment difference amount is posted to an account specially set up for this purpose.  Postings of this nature usually require additional specifications (e.g. tax code, business area). If the difference stems from a single open item, the necessary specifications can be taken from that item. In the case that led to this error message, however, the difference does not stem soley from one item, which means that this method cannot be used.
    System Response
    The reason code entered is not accepted.
    Procedure
    You can either select a different reason code, which would create a new open item for the customer or vendor OR write off the difference using the function Charge off diff.. This function either takes you into a pre-configured account assignment model or into the document overview. From here you can enter the required difference postings.
    How can I proceed ahead?
    Thanks and Regards,
    Pradnya

    Hi Saulo,
    Thanks for ur reply.
    I had alreay done the config in OBXL and OBBE. Only thing I wanted to know is while posting Incoming Payment by F-28, how to use this reason code.
    Ur reply was a gr8 help for me.
    Regards,
    Pradnya

  • Tax code error while posting Planned delivery costs in Import Scenario

    Hi!!!!!
    I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
    "Tax code V0 country IN does not exist in procedure ZAXINN"
    For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
    While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
    Please let me know what config is missing.
    Regards,
    Durga

    Is you ZAXINN assigned to the country India
    and is your taxcode (created in FTXP) created for country India?
    kr
    hakan

  • ErroR while posting J1IH (TR6)

    Hello Everybody
    I had the following error while posting J1ih.
    Balancing field "Profit Center" in line item 001 not filled
    In FB50 the following entry was posted with profit center PH1000
    PLA On Hold A/C Dr  25000
        to Bank Account Cr 25000
    When i am trying T Code J1IH
    PLA On Hold A/C Cr  25000
    Basic Excise Duty A/C Dr 22000
    ECS                            Dr 2000
    SECS                          Dr 1000
    When i save it the above mentioned error comes.
    Please Help
    Sunil Kumar

    The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
    So somehow it is not getting dervied for the PLA line item. Check the following:
    1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
    2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
    Thanks and regards
    Kedar

  • Error while posting sec.HighEd cess (1%) in J1iin.

    we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount ' 0,10' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    and.....
    System failure during locking GLaccount 1001 by 21150105
    Message no. 8I076
    reply me.  Text Removed
    Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
    Please dont add such comments

    Hey,
    I have already replied to your thread for F5702 error.
    G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
    Regards,
    Brinda

  • Error while Posting Document in FBV0

    Hi Guys,
    Iam getting following error while Posting Document in FBV0 which is already parked and it is with tax code.
    Error: "No batch input data for screen SAPMF05A 0700"   
    Kindly suggest
    Thanx and Regards
    Munender

    Also have a look at the following notes:-
    =>  Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
    =>  Note 800177 - FB01: No batch input data for SAPMF05A 0700
    thanks
    G. Lakshmipathi

Maybe you are looking for

  • Help..i got a text message with pics i need printi...

    i was telling my daughter to send pics via text message to my N97 thinking i could print them off but i cant..please help me. Solved! Go to Solution.

  • Restore database to another host - I have only rman backup files

    Hi all, The PC where Oracle was installed is crashed. I have only the RMAN backup pieces in other computer. I want to restore/recover this RMAN backup to other PC. I know the commands, restore database, recover database, but I've always used these co

  • HT201401 no sounds when receiving messages emails phone clls

    am receiving no sound alerts either outgoing or incoming. Any help gratefully received

  • Submerged iPod's Wi-Fi isn't working.

    I went "swimming" with my iPod 2nd Generation, more like I jumped in a lake and quickly realized it was in my pocket.  Though it was less than a couple of minutes it mostly still works, save for the Wi-Fi connection.  I've restore it once with little

  • Paragraph indenting issue

    I have a text frame where I would like to indent every line after the first - I am numbering my paragraphs and I don't like the look of the text wrap in the vertical space where the numbers are. Anyone know how to deal with this?