Error while pulling master data
Hello Friends,
While i was pulling my Master data, i got following errors.
Lock NOT set for: Loading master data attributes
Error 1 in the update
The attributes for characteristic 0INSP_LOT are locked by a change run
while Error 1 in the update had long text as
Diagnosis
The update delivered the error code 1 .
Procedure
You can find further information on this error in the error message of
the update.
now where can i view the error message of the update??
does this indicate that, the data has been transferred but not been updated?
Thanks in advance.
Regards,
anuradha
Hi,
Seems Some attribute change run is happening in the system. So wait till that background job(SM50/SM37) is over.And then schedule this upload.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Similar Messages
-
Error while deleting master data (Message no. RSDMD118)
Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this. -
Error while loading master data.
I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM -
BI 7.0 - Duplicate Record Error while loading master data
I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P -
36 duplicate record found. -- error while loading master data
Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
Processing 2 finished
Þ 36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ 36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWerBWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat -
Strange error while loading master data
Hi,
Has anybody seen the following error while loading master data?
6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER
and repeat again once (so total 4 lines of error message)
The update mode is "PSA and then in the infoobject (Package by Package)"
Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red. The over all status i.e. Total and Technical are both red.
It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
To make matter more confusing there are no error records in corresponding PSA data package.
any comments would be greatly appreciated.Hi Novice,
In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
Hope this helps... -
Caller-70 Error while loading master data into infoobject
hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
RakeshHi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj -
Error while performing Master Data transfer from SAPR/3- ECC5.0 to SCM4.1
Hi all,
Am getting an error while transfering Master data from SAP R/3 system ECC5.0 to SCM4.1 through Core Interface (CIF).
After creating an Integration model and while activating the same am getting the following error,
" System: SCMCLNT800 User: SMART03 06/17/2006 13:32:14
Function: /SAPAPO/CIF_LOC_INBOUND
Text:Error in address data for location DC2000/ECC800 "
Could anyone provide me how to fix this?.
Regards
BharanidharanHi Veera,
Am sorry for the delayed response. Well am using XI as integration engine for transfer of transactional data from R/3 to SCM4.1. I resolved this issue which was because of master data problem. Thanks for your input.
Regards
Bharanidharan -
Error while loading master data attribute
Hi Guru's
I am getting below mention error while loading master data attribute.
0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
Please sugggest how to resolve ?
Regards
KaranHi,
I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor.
Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
If need use Conversion exits in transfer rules.
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = 0MANU_MATNR
IMPORTING
OUTPUT = Result .
or
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = 0MANU_MATNR
IMPORTING
OUTPUT = Result .
Thanks
Reddy
Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM -
Error while loading master data to attribute ZMAJORGU(Major organisational unit)
Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
the attribute/characteristic ZMAJORGU &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
KiranRam
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA.. -
Error while uploading master data attributes thru flat file
while uploading master data attributes thru flat file i am facing the below errow. can nyone let me know plz.
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCDEIO_MAT5_ATTR was found in a newThis just means that you changed the transfer rules/transfer structure and have not refreshed the workbench yet. The infopackage data hasn't been updated ... this is similar to a datasource update, where you need to replicate to make sure BW knows the latest version.
The best way to correct this error is to reload RSA1. Every time I make a change to the tr/ts, I always run /nrsa1 to refresh the workbench.
Brian -
Language error while loading master data source for text
Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VVHey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum. -
Error While activating master data
Dear All,
I am getting an error while updating the master data.
Attributefrom characteristic A0SUBBRD not (actively) available
Attribute A4INNOCAT from characteristic A0BRD not (actively) available
Attribute A0BRD from characteristic A1MATR3 not (actively) available
Help me about to solve this issue
Thank youHi,
You are getting this error bcoz the mentioned info objects in the log are not active in the BW system.
make sure the characteristics are active and available in BW system before updating master data.
In which system are you facing this issue 9 DEV or QA or PROD)?
Have you collected all the objects while transporting? Try to retransport the objects it will work fine.
Regards
KP -
BPC Error while loading master data from SAP BW
Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trieHello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM -
Error while extracting master data datasource into BI from SRM
Hi all,
We are implemting BI for SRM 7.0.
I am extracting data for 0BBP_PLANT_LOCMAP_ATTR dataource (master data) into PSA.While extracting I am getting the following error.
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted .
Please suggest me what to do.
Thanks and Regards,
RajeshHI Check in the transactions BD84 and BD 87
in BD 87 u can process the Idocs manually
check the link it might be helpful
http://help.sap.com/saphelp_nw04/helpdata/en/78/21760251ce11d189570000e829fbbd/frameset.htm
Error "Application document not posted" when tried to receive an idoc
bd87
Regards,
MADhu
Maybe you are looking for
-
How to upload Master data in Change mode
Hi, I have inserted 3 vendors 1/2/3 in normal mode with BDC first. In these 3 vendors the Payment Terms code was not there initially. Then i created a flat file with the Ptems code for 3 vendors. But when i call MK02 to update, the fields do not
-
How do I change the highlight in Preview "search" function?
I find Preview is a great app for reading PDF documents, I prefer it to Adobe Acrobat most of the time. It also has a useful and fast Search, but .... the highlighting of found Search items in the document is USELESS!!! It is pale grey, which - when
-
How do you determine custom popup size ?
RH9/Snagit 10 I am inserting hyperlinks to graphics in a popup window and trying to get the popups to appear without scroll bars. the graphics are all roughly the same size (gui screen caps) and will be viewed internally on the same sized laptop scre
-
Who's Who tab - Position field empty/blank in ESS
Dear Friends, I am facing a problem in ESS->Employee Search -> Who's Who tab The 'Position' field is 'Blank' on the Webpage when an employee is logged in. All other fields are displayed on the screen like First Name, Last Name, Organizational Unit, C
-
Hi update TBLMCUSTOMERUSAGEDETAIL set UNUSEDVALUE=0 where CUSTOMERUSAGEDETAILID is not null; in this table only 440 record is there but is taking more time and not execute? what is the reason for this. your early response is appericated. Thanks in ad