Error while reading excel file from application server into internal table.

Hi experts,
My requirement is to read an excel file from application server into internal table.
Hence I have created an excel file fm_test_excel.xls in desktop and uploaded to app server using CG3Z tcode (as BIN file type).
Now in my program I have used :
OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
DO.
READ DATASET v_filename INTO wa_tab.
The statement OPEN DATASET works fine but I get a dump (conversion code page error) at READ DATASET statement.
Error details:
A character set conversion is not possible.
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'Y_READ_FILE' had to be terminated as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 445. If this number is 0, the second error case, as
mentioned above, has occurred.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4103' is not known to the system.
If the conversion error occurred at read or write of  screen, the file
name was '/usr/sap/read_files/fm_test_excel.xls'. (further information about
the file: "X 549 16896rw-rw----201105170908082011051707480320110517074803")
Also let me know whether this is the proper way of reading excel file from app server, if not please suggest an alternative .
Regards,
Karthik

Hi,
Try to use OPEN DATASET v_filename FOR INPUT IN BINARY mode encoding default. instead of OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
As I think you are uploading the file in BIN format to Application server and trying to open text file.
Regards,
Umang Mehta

Similar Messages

  • Read Excel File on Application Server to Internal Table

    Hi Everybody!
    Can anyone tell me how I can Read in an Excel File from the Application Server?
    I'm familiar with the OPEN DATASET Statement and I already use it to read in text files.
    Important is, that it works in the Batch / can be used as a background job
    I already tried using
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    which did not work.
    Can anybody please help me`?
    I created the file I try to read out from the Application Server Folder with the Standard upload
    in ABAP Web Dynpro and Wrote it to the Server with the following code. Does anyone know
    if maybe already the writing is to the application server is wrong?
    try.
          convt = cl_abap_conv_in_ce=>create(
            input = lv_filedata
            encoding = 'UTF-8'
            replacement = '?'
            ignore_cerr = abap_true ).
          convt->read( importing data = s_cont ).
        catch cx_sy_conversion_codepage.
          wd_comp_controller->show_error( exporting
            text = 'There occurred an error during conversioning the code page.' type = 'E' ).
      endtry.
        open dataset XLSFILEPATH for output in binary mode.
        transfer s_cont TO XLSFILEPATH.
        close dataset XLSFILEPATH.
    Best Regards and Thanks,
    Steffen

    Hi Suhan,
    I tried the following, but the output in the table doesn't look good at all
    Can you please help?
    OUTPUT:
    ??#u0871#?################>###??##############################=#######????########???????????????????????????????????????????????????????????????????????????????????????????????????????
    ####################################################################################### ###!###"#######$###%###&###'###(###)###*###+###,###-###.###/###0###1###2###3###4###5###6###7#
    #?######Z##A#r#i#a#l###3########,#####0#\# #"#? "#;#\#-###,#####0#\# #"#? "###=########,#####0#\# #"#? "#;#[#R#e#d#]#\#-###,#####0#\# #"#? "###?########,#####0#.#0#0#\# #"#? "#;#\#-
    ###?? ##?########? ?#######?? ##?########? ?#######?? ##?#P######? ?#######?? ##?#P######? ?#######?? ##?# ######? ?#######?? #################A#?#?j}#(#}############################
    ##########?########}#?#}#############*##################_#? _#-########????#,#####0########????#? _#-#;########????#"#?#?#\########????#_#-#@#_
    #######????########}#(#}#############+##################_#? _#-}#(#}#############,##################_#? _#-}#(#}#############-##################_#? _#-}#(#}#############.###########
    ##########?########}#<#}#############6#############?}#?#_#? _#-########??#?#,#####0}#<#}#############7#############?e#?#_#? _#-########????#,#####0}#?#}#############8###############
    #######????########}#?#}#############9#############????#_#? _#-########????#,#####0########????#? _#-#;########????#"#?#?#\########????#_#-#@#_
    #######????########}#(#}#############:##################_#? _#-}#-#}#############;##################_#? _#-#####}#P#}#############<##################_#? _#-#############,#####0#####
    ##Check Cell?#z#?##############?
    #C#h#e#c#k# #C#e#l#l##########?##????########????#####?##????#######?##????#######?##????#######?##????##?###+?#??# #?##############?##C#o#m#m#a#####?###,?#??#(#?##############?##C#
    #5####Input?#p#?##############?##I#n#p#u#t##########?##?u0319?#####?##??v?#####?#####?#######?#####?#######?#####?#######?#####?##?###6####Linked Cell?#F#?##############?##L#i#n#k#e#d#
    ?##N#o#t#e##########?##????#####?##????#######?##????#######?##????#######?##????##?###9####Output?#r#?##############?##O#u#t#p#u#t##########?##????#####?##????#####?##????#######?#
    #;####Title?#1#?##############?##T#i#t#l#e##############I}?%####?#
    #<####Total?#H#?##############?##T#o#t#a#l################?########O???##########O???##?###=####Warning Text?#:#?##############?##W#a#r#n#i#n#g# #T#e#x#t##########?##?##??#X#?######
    ##Commission###Health Incentive ###Housing Norm###Hypo Tax###Hypo Tax- Special Wages###Paid Time Off(##Vision Insurance- Withheld from Employee###Working Spouse/DP surcharge)##TX St
    ###########?#?#?######### #########c###?3###N##?h##?t##nu############d#################????MbP?_#####*#####+#####?#####?###########%#####?#?###?#########?#####?#####&###ffffff??'###
    #I#######}########+######}#######$
    ######}#######m###############c###################?###################?###################?###################?###################?###################?###################?##########
    CODING:
    types: begin of st_excel_parse,
              clientno type string,
              fileid type string,
              paymtreportingid type string,
              name type string,
              employee_id  type string,
              home_country type string,
              host_country  type string,
              actstartdt  type string,
              actenddt type string,
              assignment_status type string,
              paymttypenm  type string,
              paymtcategorynm  type string,
              paymtdt  type string,
              transeffdt  type string,
              amount  type string,
              currency_code type string,
      end of st_excel_parse.
      data: ls_excel_parse type st_excel_parse,
            lt_excel_parse type table of st_excel_parse.
      data l_wa_raw_data type string.
      open dataset gv_str_filename for input in text mode encoding default.
      if sy-subrc = 0.
        do.
          read dataset gv_str_filename into l_wa_raw_data.
          if sy-subrc = 0.
            "Split the file record using <TAB> and store inside the work area
            split l_wa_raw_data at cl_abap_char_utilities=>horizontal_tab into :
              ls_excel_parse-clientno
              ls_excel_parse-fileid
              ls_excel_parse-paymtreportingid
              ls_excel_parse-name
              ls_excel_parse-employee_id
              ls_excel_parse-home_country
              ls_excel_parse-host_country
              ls_excel_parse-actstartdt
              ls_excel_parse-actenddt
              ls_excel_parse-assignment_status
              ls_excel_parse-paymttypenm
              ls_excel_parse-paymtcategorynm
              ls_excel_parse-paymtdt
              ls_excel_parse-transeffdt
              ls_excel_parse-amount
              ls_excel_parse-currency_code .
            append ls_excel_parse to lt_excel_parse.
          endif.
        enddo.
      endif.

  • Issue with uploading XML file from application server into internal table

    i Need to fetch the XML file from the application server and place into internal table and i am getting error message while using the functional module   SMUM_XML_PARSE and the error message is "line   1 col   1-unexpected symbol; expected '<', '</', entity reference, character data, CDATA section, processing instruction or comment" and could you please let me know how to resolve this issue?  
        TYPES: BEGIN OF T_XML,
                 raw(2000) TYPE C,
               END OF T_XML.
    DATA:GW_XML_TAB TYPE  T_XML.
    DATA:  GI_XML_TAB TYPE TABLE OF T_XML INITIAL SIZE 0.
    DATA:GI_STR TYPE STRING.
    data:  GV_XML_STRING TYPE XSTRING.
    DATA: GI_XML_DATA TYPE  TABLE OF SMUM_XMLTB INITIAL SIZE 0.
    data:GI_RETURN TYPE STANDARD TABLE OF BAPIRET2.
        OPEN DATASET LV_FILE1 FOR INPUT IN TEXT MODE ENCODING DEFAULT.
        IF SY-SUBRC NE 0.
          MESSAGE 'File does not exist' TYPE 'E'.
        ELSE.
          DO.
    * Transfer the contents from the file to the work area of the internal table
            READ DATASET LV_FILE1 INTO GW_XML_TAB.
            IF SY-SUBRC EQ 0.
              CONDENSE GW_XML_TAB.
    *       Append the contents of the work area to the internal table
              APPEND GW_XML_TAB TO GI_XML_TAB.
            ELSE.
              EXIT.
            ENDIF.
          ENDDO.
        ENDIF.
    * Close the file after reading the data
        CLOSE DATASET LV_FILE1.
        IF NOT GI_XML_TAB IS INITIAL.
          CONCATENATE LINES OF GI_XML_TAB INTO GI_STR SEPARATED BY SPACE.
        ENDIF.
    * The function module is used to convert string to xstring
        CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
          EXPORTING
            TEXT   = GI_STR
          IMPORTING
            BUFFER = GV_XML_STRING
          EXCEPTIONS
            FAILED = 1
            OTHERS = 2.
        IF SY-SUBRC <> 0.
          MESSAGE 'Error in the XML file' TYPE 'E'.
        ENDIF.
      ENDIF.
      IF GV_SUBRC = 0.
    * Convert XML to internal table
        CALL FUNCTION 'SMUM_XML_PARSE'
          EXPORTING
            XML_INPUT = GV_XML_STRING
          TABLES
            XML_TABLE = GI_XML_DATA
            RETURN    = GI_RETURN.
      ENDIF.
      READ TABLE GI_RETURN TRANSPORTING NO FIELDS WITH KEY TYPE = 'E'.
      IF SY-SUBRC EQ 0.
        MESSAGE 'Error converting the input XML file' TYPE 'E'.
      ELSE.
        DELETE GI_XML_DATA WHERE TYPE <> 'V'.
        REFRESH GI_RETURN.
      ENDIF.

    Could you please tel me  why the first 8 lines were removed, till <Soap:Body and also added the line <?xml version="1.0" encoding="UTF-8"?> in the beggining .
    Becuase there will be lot of  XML files will be coming from the Vendor daily and that should be uploaded in the application server and should update in the SAP tables based on the data in the XML file.
    what information i need to give to vendor that do not add the first 8 lines in the XML file and add the line in the beggining <?xml version="1.0" encoding="UTF-8"?>   ??????
    Is there any other way we can do with out removing the lines?

  • Read excel file in application server to internal table

    Hi,
    I have an excel file located in some folder in my application server. I don't have excel installed in the server. Now I want to read the excel file data into an internal table. I tried to use READ DATASET, but it returned junk characters.
    I have searched SDN extensively for this, but without any succesful answer.
    Regards,
    Arun.

    Hi Arun,
    Please check the code below for your reference.
    TABLES:eket.
    TYPE-POOLS truxs.
    DATA it_truxs(4056) TYPE c OCCURS 0.
    DATA:v_dt(2),filename TYPE string,
    i_temp TYPE truxs_t_text_data.
    DATA:BEGIN OF it_eket OCCURS 0,
    ebeln LIKE eket-ebeln,
    ebelp LIKE eket-ebelp,
    etenr LIKE eket-etenr,
    eindt LIKE eket-eindt,
    END OF it_eket.
    PARAMETERS: p_path TYPE rlgrap-filename.
    SELECTION-SCREEN : PUSHBUTTON /2(10) pb_but1 USER-COMMAND get.
    PARAMETERS:p_no TYPE i.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path.
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = sy-cprog
          dynpro_number = sy-dynnr
        IMPORTING
          file_name     = p_path.
    START-OF-SELECTION.
      REFRESH :it_eket,i_temp,it_truxs.
      filename = p_path.
      CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
      filename = filename
      filetype = 'ASC'
    * has_field_separator = 'X'
      TABLES
      data_tab = i_temp.
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_field_seperator    = 'X'
          i_tab_raw_data       = i_temp
          i_filename           = p_path
        TABLES
          i_tab_converted_data = it_eket
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      SORT it_eket BY ebeln.
      DELETE ADJACENT DUPLICATES FROM it_eket COMPARING ebeln.

  • Not recognizing # while reading the file from application server

    Hi
    I am reading a file from application server. While reading into internal table with read statement the last field in each record is filling with hash symbol in the last digit. If I write any if condition with HASH symbol its not going inside the if condition, means its not recognizing as hash may be its internally treating as some other. I need to remove the hash from that field. How I can do that.
    Thanks,
    kishore

    I faced exact situation. Yes, internally its treated as some other special character. What i did was, becuase hash symbol was always coming at the end...i created a dummy field in my internal table so that it will not interfere with my actual data. When i see the data in my internal table, the hash always falls in the last field (dummy) which i will ignore. I could not get solution to remove this hash so i adopted this approach and it worked!!
    Hope it helps,
    SKJ

  • Error in Reading the file from Application Server

    Hi,
    This Error is regarding one of my interface, the issue is that , the interface reads data from file in bunch suppose 100 records at a time , then processes those records and once finished go for next 100 records .
    Noe the error is that , the process takes place till 500 records correctly but when it went to fetch for next 100 i.e fom 501 to 600 it selects only 501 to 583 .
    this records has been processed successfully but the job finished there only
    but the file contains 788 records
    When the same file has been run in other server it ran successfully without such error .
    Can you please suggest how to resolve the issue

    Hi,
    Try to manually download the file from application server using standard transactions, and than check how many records are you able to download from app. server.
    I guess there might be something wrong with the format of 583rd record, which makes sap assume that the file has come to an end.
    Hope this will help you.
    Regards,
    Vinit...

  • Download file from application server to internal table in background

    hi all,
    i want to download a file from appliaction server into my internal table but in background.
    i had tryed CG3Z and CG3Y t-code but screen that is coming is asking for the parameters, and i want that screen should not appear and file should be saved in the predefined path by me.
    if there any way to do so,
    Points will be rewarded as per the Aswers.
    thaks in advance.

    Hi Sudeep,
       Use this code to get file data from application server.
    REPORT  ZE0232_BDC_APPLSERVER.
    DATA: FILE_PATH TYPE STRING.
    FILE_PATH = 'c:\bdc_mat.prn'.
    DATA: BEGIN OF ITAB OCCURS 0,
                END OF ITAB.
    OPEN DATASET FILE_PATH FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF SY-SUBRC = 0.
    DO.
    READ DATASET FILE_PATH INTO ITAB.
    IF ITAB-RESNO NE SPACE.
       APPEND ITAB.
    ELSE.
    EXIT.
    ENDIF.
    ENDDO.
    ENDIF.
    CLOSE DATASET FILE_PATH.
    LOOP AT ITAB.
    WRITE:/ ITAB.
    ENDLOOP.
    FILE PATH IS  application server path.
    IF USEFULL REWARD

  • Upload XML file from Application Server to Internal Table

    Hi Experts,
       i have xml file in application server and i want to convert to internal table .
       i have tried this link http://wiki.sdn.sap.com/wiki/display/ABAP/UploadXMLfiletointernal+table.
       Here the file is loaded from local(presentation Server) ..
       i want to know how to select file from application layer ..and schedule in background..
       i also tried  FM '/SAPDMC/LSM_F4_SERVER_FILE' but this need front end selection of file from application server..
       i need to select a xml file from application server and convert into internal table in background.. help me on this..

    Have a look on
    Re: How to convert XML data to different ABAP internal table
    Thanks
    Ravin

  • How to transfer excel files(on ftp server) into internal table?

    hello,everyone
    pls tell me how to transfer excel files those on a ftp server into internal table?
    ps.i know the function 'ftp_server_to_r3',it can help to transfer flat file.

    Hi,
    I believe you want to get the data from the FTP Server to R3.
    I am also sending the code. Have a look and it would help you.
    First get the Password and user name and the FTP Server Path where file is stored and FTP Server Host name
    FUNCTION zfi_ftp_get.
    *"*"Local Interface:
    *"  IMPORTING
    *"     VALUE(I_FILENAME) TYPE  C
    *"  TABLES
    *"      T_BLOB STRUCTURE  ZFI_TLM_LENGTH OPTIONAL " is a table type with a field called line of length 992
    *"      RETURN STRUCTURE  BAPIRET2 OPTIONAL
      DATA : i_password(30)     TYPE c,
             i_user(30)         TYPE c,
             i_host(30)         TYPE c,
             i_rfc_destination  TYPE rfcdes-rfcdest,
             i_length           TYPE i,
             i_folder_path(100) TYPE c.
      DATA:   lv_blob_length   TYPE i.
      DATA:   lv_length        TYPE i,  "Password length
              lv_key           TYPE i VALUE 26101957,
              lv_password(30)  TYPE c,
              lv_ftp_handle    TYPE i,
              lv_cmd(80)       TYPE c.
      DATA: BEGIN OF result OCCURS 0,
            line(100) TYPE c,
            END OF result.
      TYPES: BEGIN OF ty_dummy,
             line(392) TYPE c,
           END   OF ty_dummy.
      DATA: lt_dummy TYPE TABLE OF ty_dummy,
            ls_dummy LIKE LINE  OF lt_dummy.
      i_password        = 'vnhdh'.
      i_user            = 'sdkgd'.
      i_host            = 'sbnksbg'.
      i_rfc_destination = 'SAPFTP'.
      i_length          = '992'.
      i_folder_path     = '/hioj/hohjk/hh'.
      lv_length = STRLEN( i_password ).
      CALL FUNCTION 'HTTP_SCRAMBLE'
        EXPORTING
          SOURCE      = i_password
          sourcelen   = lv_length
          key         = lv_key
        IMPORTING
          destination = lv_password.
      CALL FUNCTION 'FTP_CONNECT'
        EXPORTING
          user            = i_user
          password        = lv_password
          host            = i_host
          rfc_destination = i_rfc_destination
        IMPORTING
          handle          = lv_ftp_handle
        EXCEPTIONS
          not_connected   = 1
          OTHERS          = 2.
      IF sy-subrc = 1.
        return-type = 'E' .
        return-message = 'FTP Connection not Successful'.
        APPEND return.
      ELSEIF sy-subrc = 2.
        return-type = 'E' .
        return-message = 'FTP Connection not Successful'.
        APPEND return.
      ELSEIF sy-subrc EQ 0.
        return-type = 'S' .
        return-message = 'FTP Connection Successful'.
        APPEND return.
        CONCATENATE 'cd' i_folder_path INTO lv_cmd SEPARATED BY space.
        CALL FUNCTION 'FTP_COMMAND'
          EXPORTING
            handle        = lv_ftp_handle
            command       = lv_cmd
          TABLES
            data          = result
          EXCEPTIONS
            command_error = 1
            tcpip_error   = 2.
        IF sy-subrc = 1.
          return-type = 'E' .
          return-message = 'Command Error Occured during open of FTP Folder'.
          APPEND return.
        ELSEIF sy-subrc = 2.
          return-type = 'E' .
          return-message = 'TCIP Error Occured during open of FTP Folder'.
          APPEND return.
        ELSE.
          REFRESH t_blob.
          lv_blob_length = 992.
          TRANSLATE i_filename TO LOWER CASE.
          CALL FUNCTION 'FTP_SERVER_TO_R3'
            EXPORTING
              handle      = lv_ftp_handle
              fname       = i_filename         
            IMPORTING
              blob_length = lv_blob_length
            TABLES
              blob        = lt_dummy.
          t_blob[] = lt_dummy[].
        ENDIF.
      ENDIF.
    ENDFUNCTION.
    Regards
    Sajid
    Edited by: shaik sajid on Nov 16, 2010 7:25 AM

  • How to read .xls file from FTP server t oInternal table

    Hi
    am using the FTP_SERVER_TO_R3 to read xls file from FTP server to internal table
    but the data i get in LT_TEXT is special characters.
    CALL FUNCTION 'FTP_SERVER_TO_R3'
    EXPORTING
    handle = hdl
    fname = f_name "ProdDataFromCRM.xls.
    * CHARACTER_MODE = 'X'
    * IMPORTING
    * BLOB_LENGTH =
    TABLES
    BLOB = lt_text
    * TEXT = lt_text
    EXCEPTIONS
    TCPIP_ERROR = 1
    COMMAND_ERROR = 2
    DATA_ERROR = 3
    OTHERS = 4
    can any one help me out to get the exact data..
    Really appreciate your quick response..
    Thank You

    Hi, if you really retrieve an excel file, you can not see the data in ABAP. You may see them in Excel. For this you may use
    CALL METHOD document->open_document_from_table
    of the interface i_oi_document_proxy for OLE objects. You can access the data with reference to the interface i_oi_spreadsheet.
    Please check [Desktop Office Integration (BC-CI)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf] for details.
    But, who knows, perhaps you want "And Now For Something Completely Different".
    Regards
    Clemens

  • Open data set for reading excel file on application server in back ground

    open data set for reading excel file on application server in back ground

    hi Vijay,
    I am afraid you won't be able to read from Excel file on Appl. Server.
    ec

  • Problem  while reading XML file from Aplication server(Al11)

    Hi Experts
    I am facing a problem while  reading XML file from Aplication server  using open data set.
    OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
    IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      READ DATASET v_dsn INTO v_rec.
    WHILE sy-subrc <> 0.
      ENDWHILE.
      CLOSE DATASET v_dsn.
    The XML file contains the details from an IDOC number  ,  the expected output  is XML file giving  all the segments details in a single page and send the user in lotus note as an attachment, But in the  present  output  after opening the attachment  i am getting a single XML file  which contains most of the segments ,but in the bottom part it is giving  the below error .
    - <E1EDT13 SEGMENT="1">
      <QUALF>001</QUALF>
      <NTANF>20110803</NTANF>
      <NTANZ>080000</NTANZ>
      <NTEND>20110803<The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
    /SPAN></NTEND>
      <NTENZ>000000</NTENZ>
    for all the xml  its giving the error in bottom part ,  but once we open the source code and  if we saved  in system without changing anything the file giving the xml file without any error in that .
    could any one can help to solve this issue .

    Hi Oliver
    Thanx for your reply.
    see the latest output
    - <E1EDT13 SEGMENT="1">
      <QUALF>003</QUALF>
      <NTANF>20110803</NTANF>
      <NTANZ>080000</NTANZ>
      <NTEND>20110803</NTEND>
      <NTENZ>000000</NTENZ>
      <ISDD>00000000</ISDD>
      <ISDZ>000000</ISDZ>
      <IEDD>00000000</IEDD>
      <IEDZ>000000</IEDZ>
      </E1EDT13>
    - <E1EDT13 SEGMENT="1">
      <QUALF>001</QUALF>
      <NTANF>20110803</NTANF>
      <NTANZ>080000</NTANZ>
      <NTEND>20110803<The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
    /SPAN></NTEND>
      <NTENZ>000000</NTENZ>
    E1EDT13 with QUALF>003 and  <E1EDT13 SEGMENT="1">
    with   <QUALF>001 having almost same segment data . but  E1EDT13 with QUALF>003  is populating all segment data
    properly ,but E1EDT13 with QUALF>001  is giving in between.

  • Error while uploading the file from Allpcation server in LSMW-7th step

    Hi Experts,
    what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
    Thanks in advance,
    KSR

    Hi
    I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
    Is there any specific CODE PAGE to be maintained...
    Thanks in advance
    Oarsk

  • Regarding Reading the file from Application Server

    Hi,
    I am trying to read data from Application Server but due to special characters it is getting dumped out.
    US24,Q,Acero (Carbon),AA,0010,0001,01,Ver Mir para dimension#
    US24,Q,Acero (Carbon),AA,0010,0002,01,Area rectificada sin da#os ra
    US24,Q,Acero (Carbon),AA,0010,0003,01,Ver Mir para dimension#
    US24,Q,Acero (Carbon),CD,0010,0001,01,ITPE Soken para verificacion
    US24,Q,Acero (Carbon),CD,0010,0010,01,No se permite desprendimiento
    US24,Q,Acero (Carbon),CD,0010,0002,01,"Vernier, cinta metrica"#
    In the last line it is going into dump due to special character ".
    Please suggest.
    Thanks
    Priyanka.

    Hi,
    You can check the mode in which you are reading the file
    from application server that is
    Open Dataset in Binary or Text Mode.
    Hope it helps
    Regards
    Mansi

  • FM to read XML files from Application server in ECC5.0

    Hi All,
    We need to pick up an XML file from Application server/FTP server. The requirement is to parse the XML file and process it to create material master. SAP provides standard function modules to read XML files.
    Now we need to read the XML file contents of MM01 and upload into SAP Data Base through BAPI
    I need to know about the Function modules to read XML files from Application Server and also about the FM's that will update the Date base tables with the data obtained form XML files.
    Regards
    Prathima

    Parsing XML data:
    http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/frameset.htm
    or alternatively check out ABAP online help for "CALL TRANSFORMATION".
    For creating the material master look at BAPI_STANDARDMATERIAL_CREATE.
    Thomas

Maybe you are looking for

  • Webcam recording application

    Hi all. I am pretty new to Flash development so here goes. I have got FMS dev server running and it seems to work. Also have the trial version of CS5 and using FlashDevelop. There is an absolute barrage of information on the topic at hand but never a

  • Can't find serial number in purchased box of Photoshop Elements 13 product from B

    I can't find the 24 bit serial # in the Photoshop Elements 13 box purchased from retailer.  There was no card in the package, nor serial # on the sleeve, nor on the flip page on the back of the box. Please help

  • A simple JSF Table CRUD - How To

    Hello, I have to build a few CRUDs for very simple tables (3 columns at most) implemented as JSF tables. I wish the "Create" function to work as: 1. By clicking the "Create" button (or link?), append an empty row at the end of the table (or perhaps i

  • Notes application disappeared from my iMac, how do I get it back?

    My notes application has disappeared from my iMac, how do I get it back?

  • Is Microsoft OLE DB 2.8 unicode compliant ?

    I am trying to insert chinese characters on Windows XP SP2 machine using Visual Basic application into oracle. My oracle version is 10.2 , MDAC components 2.8. The charset of my oracle instance is utf8. The datatype in visual basic for the stored pro