Error while registering database

Hi,
I get "RMAN-03008: error while performing automatic resync of recovery catalog" while registering a database which is located on my server.
Following is the procedure i have done to register it.
C:\Documents and Settings\yogeshn.RITPL>rman target=sys/sys@oracle10 catalog=rman/rman@rman_db
Recovery Manager: Release 10.2.0.3.0 - Production on Mon Dec 12 12:23:02 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.00 in TARGET database is
not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.00 in TARGET database is not cur
rent
connected to target database: ORACLE10 (DBID=2437633359)
connected to recovery catalog database
RMAN> connect target;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-06167: already connected
RMAN> register database;
database registered in recovery catalog
starting full resync of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03008: error while performing automatic resync of recovery catalog
ORA-00904: : invalid identifier
RMAN>
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.00 in TARGET database is not currentIt seems the rman version (10.2.0.3) is higher than the target database version, this is not supported. Make sure rman executable and target database are on the same level.

Similar Messages

Error while Registering the Database with Catalog..

I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!

Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

Error while registering Oracle JDBC Diagnosability MBean - version 1.2.1

Hi,
I am running version 1.2.1 of SQL Developer (build MAIN-32.13). I have a local copy of Oracle 11g running on Windows XP. I am running version 1.6.0_03 of java.
When I fire it up, I get the following message in the "logging page - log" pane:
Source: oracle.jdbc.driver.OracleDriver
Message: Error while registering Oracle JDBC Diagnosability MBean.
Is this something I should worry about?
Graham

I got the same thing using SQLDeveloper shipped with 11g. It is every annoying since sqlplusw.exe is not available anymore, neither iSQLPLUS or SQLPLUS.exe is good enough all of the sudden that I found not much choice of accessing the database on windows ...

Error while registering Oracle JDBC Diagnosability Mbeans?

Hi,
I have installed Oracle 11g 11.1.0.6.0. I am facing problem while executing any command in sql Developer. Below the frame an error message is shown : Error while registering Oracle JDBC Diagnosability Mbeans? and while executing any query like 'select user from dual' error is generated saying connection in busy. I have made connection with system user.so, how to resolve this problem?
Thanks

There are a lot of information in listener.log file , some information i am posting .
Each time i am opening Oracle SQL Developer programme, a error is generated , saying " oracle.jdbc.driver.OracleDriver Error while registering Oracle JDBC Diagnosability MBean.".
Though i can create a new connection and query database tables. But why this error message is generated each time i open Oracle SQL Developer?
06-MAR-2010 20:02:19 * service_update * earth1 * 0
Sat Mar 06 20:03:10 2010
06-MAR-2010 20:03:10 * service_update * earth1 * 0
06-MAR-2010 20:03:19 * service_update * earth1 * 0
Sat Mar 06 20:03:43 2010
06-MAR-2010 20:03:43 * service_update * earth1 * 0
Sat Mar 06 20:04:16 2010
06-MAR-2010 20:04:16 * service_update * earth1 * 0
06-MAR-2010 20:04:17 * (CONNECT_DATA=(SID=EARTH1)(CID=(PROGRAM=F:\app\shyam\product\11.1.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe)(HOST=SHYAM-E23629982)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1360)) * establish * EARTH1 * 0
06-MAR-2010 20:04:19 * service_update * earth1 * 0

Error while registering JDBC and some more problems (11g)

Hi there.
I'm new here and using Oracle,I've been studying SQL Server at the school and I'm going to have Oracle 9i lessons soon.
I've installed Oracle 11g here but things aren't going well yet.
When I open Oracle SQL Developer,I have the message "Error while registering JDBC Diagnosability MrBean.
When I try to do a connection with SQL Developer I have the error "The network device could not establish the connection",I have an Oracle 11g Book reference for studies,and I'm doing exactly how it shows me. (maybe it will happen until the first problem be solved)
The last one,when I use SQL Plus I can't get a sucessfull login.After the installation I could with scott and SYSMAN,but after a reboot I can't any longer.
How can I get it working now?
thanks

Well I don't know what happened but it's working now. I did an ipconfig and noticed that the IP address was incorrect. The gateay IP address was also incorrect. I changed it to the values posted in ipconfig. I opened up SQL Developer and was then able to make the connection. I went back and changed the IP addresses back to the old values. I then opened up SQL Developer again. I was expecting to see the refuded connection message but instead it connected. I have no idea what to think now. Can SQL Developer connect to a non local database?
I tried to connect to another remote SQL Server but got xxxx invalid username for some reason. I know the username/password is correct.
Lastly, I tried to do a quick migration of a simple table. It stops at the generate step. After hitting close buton. It asks to log back onto SQL Server.
I noticed that the schema being used gets created with dbo_schemaname
i.e. scott would be user dbo_scott
I tried to create a user called dbo_scott and it still stopped at the generate step.
Any ideas? Thanks for your help

OLE initialization or OCX load error while registering OCX

Installing database 10.1.0.2 enterprise on windows XP pro SP2:
When the installer gets to: "Setting up 'Oracle Remote Configuration Agent 10.1.0.2.0' I am getting the error:
"OLE initialization or OCX load error while registering OCX".
Please, help, I have no clue!
Kind regards,
Morten Steffensen

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Oracle Discussion Forums » Application Development in PL/SQL » SQL Developer (Not for general SQL/PLSQL questions) which is dedicated forum site.
Regard
Helios

"Error while registering the Java 2 Runtime Environment registry keys"

"Error while registering the Java 2 Runtime Environment registry keys"
I am getting the above error when trying to install the 1.3 JRE (installed with the 1.3 plug in which I need). As part of my development I have been installing and uninstalling the JRE multiple times. Then, I got the above error when trying to install it, and now it appears to be installed but I cannot uninstall it. When I try to uninstall it, it just remains, and when I try to install it again I get the above error. I have tried cleaning up all javasoft registry entries, but it doesnt seem to have helped. Can anyone help me either completely uninstall the JRE so I can do a clean install or help me get rid of the error above when I install. Is there some registry entries I should be looking at? Anything else? this is quite urgent as I need to test my applet with the plugin installed and not installed - and I currently cant uninstall it. Any ideas?
Thanks for your help
Aaron

I am getting this same error message when trying to upgrade from 1.3.1_03 to 1.3.1_19.
I have multiple versions of jre's and jdks on my machine.
Anyone else seen this problem or know how to resolve it.

Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
Chetan

See the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan

Error while creating database in classic appln

Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advance

Can you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine.

Error while creating database manually

hi guru's i am getting error while creating database manually
my sql is SQL>create database lily
logfile group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
 group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
 group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
character set WE8ISO8859P1
national character set utf8
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
 size 50M
 autoextend on
 next 10M maxsize unlimited
 extent management local
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
 size 10M
 autoextend on
 next 10M
 maxsize unlimited
undo tablespace undo
 datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
 size 10M
default temporary tablespace temp
 tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
 size 10M;and i am getting following error
create database lily
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
code}
Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PM

create database lily
logfile group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
 group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
 group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf' size 150M
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
undo tablespace undo datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf' size 10M
default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
Edited by: rajeysh on Jul 19, 2011 6:59 PM

Error while registering SOA Composite

Hi all
I used OOTB AutoApproval composite and added mail stuff to that composite. And run the composite and deployed it successfully. I don't want approver, task should be auto-approved. But for other custom composite i deployed and registered the composite. But for this i cann't.
can any one help on this.
But i am not able to register it. I am getting below error while registering
Exception in thread "Main Thread" oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/AutoApproval!1.2 due to The task ApprovalTask specified for the workflow composite default/AutoApproval!1.2 is not valid
[java] at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
[java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
[java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_1035_WLStub.registerWorkFlowDefinitionx(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
[java] at $Proxy2.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceDelegate.registerWorkFlowDefinition(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
[java] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
[java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
[java] at weblogic.security.Security.runAs(Security.java:41)
[java] at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
[java] at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
[java] at $Proxy3.registerWorkFlowDefinition(Unknown Source)
[java] at oracle.iam.platformservice.workflowregclient.WorkflowRegistration.main(WorkflowRegistration.java:42)
[java] Caused by: oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/AutoApproval!1.2 due to The task ApprovalTask specified for the workflow composite default/AutoApproval!1.2 is not valid
[java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.mapWorkflow(WorkflowRepositoryImpl.java:132)
[java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.registerWorkFlowDefinition(WorkflowRepositoryImpl.java:113)
[java] at oracle.iam.platform.workflowservice.impl.WorkflowServiceImpl.registerWorkFlowDefinition(WorkflowServiceImpl.java:230)
[java] at oracle.iam.platformservice.impl.WorkflowRegistrationServiceImpl.registerWorkFlowDefinition(WorkflowRegistrationServiceImpl.java:38)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB.registerWorkFlowDefinitionx(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
[java] at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
[java] at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
[java] at $Proxy507.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.__WL_invoke(Unknown Source)
[java] at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_WLSkel.invoke(Unknown Source)
[java] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
[java] at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
[java] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:523)
[java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
[java] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
[java] at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:119)
[java] at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
[java] at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
BUILD FAILED

First of all you have modifed OOTB approval flow, why you are not going for custom approval flow with skip rule.
Now
Are you able to compile the workflow?
before going to re - register follow proper steps.
Also check the below link
Metalink ID 1221305.1
Custom Auto Approval flowflow in OIM
Thanks,
Kuldeep

Error while registering Oracle JDBC Diagnosability MBean

Hi All,
I get the following error (pasted at the end)when trying to use the OracleDriver class to create connections.
I am using JDeveloper11g-11.1.1.2.0, and
JDeveloper11g-11.1.1.2.0/wlserver_10.3/server/ext/jdbc/oracle/11g/ojdbc6.jar.
I read other posts with similar errors; the recommendation was to update the jar to the latest patch. But that still does not seem to work.
Any help/pointers appreciated.
Thanks
Meera
------------ Error trace ----------------------------------------------------
SEVERE: Error while registering Oracle JDBC Diagnosability MBean.
java.security.AccessControlException: access denied (javax.management.MBeanTrustPermission register)
 at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
 at java.lang.SecurityManager.checkPermission(SecurityManager.java:568)
 at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.checkMBeanTrustPermission(DefaultMBeanServerInterceptor.java:1824)
 at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:310)
 at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
 at oracle.jdbc.driver.OracleDriver.registerMBeans(OracleDriver.java:345)
 at oracle.jdbc.driver.OracleDriver$1.run(OracleDriver.java:197)
 at java.security.AccessController.doPrivileged(Native Method)
 at oracle.jdbc.driver.OracleDriver.<clinit>(OracleDriver.java:193)
 at java.lang.Class.forName0(Native Method)
 at java.lang.Class.forName(Class.java:169)
 at oracle.communications.brm.pdc.server.transfomation.CrossReferenceDBConnectionObj.initializeConnection(Unknown Source)
 at oracle.communications.brm.pdc.server.transfomation.CrossReferenceHandler.<init>(Unknown Source)
 at oracle.communications.brm.pdc.server.transfomation.RRE_TransformationEngine.createWorkItemProcessors(Unknown Source)
 at oracle.communications.brm.pdc.server.junit.RRE_TransformationEngineTests.testCreateWorkItemProcessors(Unknown Source)
 at oracle.communications.brm.pdc.server.junit.RRE_TransformationEngineTests.testMain(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44)
 at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15)
 at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41)
 at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:20)
 at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
 at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
 at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:73)
 at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:46)
 at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
 at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
 at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
 at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
 at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
 at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
 at org.junit.runners.Suite.runChild(Suite.java:115)
 at org.junit.runners.Suite.runChild(Suite.java:23)
 at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
 at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
 at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
 at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
 at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
 at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
 at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39)
 at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:421)
 at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:912)
 at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:766)

Hi,
did you enable the permission at the jvm level?
its' done by adding the following lines to your java.policy file under <JRE_HOME>/lib/security
grant {
// JMX Java Management eXtensions
permission javax.management.MBeanTrustPermission "register";
ciao,
Giovanni
P.S. This solution was taken from http://forums.sun.com/thread.jspa?threadID=491124

ERROR WHILE INSTALLING DATABASE INSTANCE

Hi All,
I am getting an error while installing database instance in 4.7EE with Oracle 8i.The error is
running sapstart.exe name=AS9 nr=00 SAPDIAHOST=astrum -wait
SAPSTART finished successfully on astrum_AS9_00, but Dispatcher is not connected to MessageServer.
sapparam(1c): No Profile used.
PLEASE HELP ME....

hi pavan,
i believe that oracle 8i are no longer supported by SAP.
By default, SAP R/3 4.7 EE should come with Oracle 9i.
Check your installer again.
ardhian
http://sapbasis.wordpress.com

Error while registering for index relevant events: Invalid RID: No reposito

Hi,
I created an index and assigned a datasource to search the Windows network drive. I activated the index and now when I am monitoring the application log, I see the error Error while registering for index relevant events: Invalid RID: No repository manager found for prefix: and XIndexing documents failed. AbstractTrexIndex: indexing some of the resources failed Continue crawling and Indexing document failed. Access denied for the IndexmanagementService.
When I see the queue status, the queue status is always idle, even after I activate the queue.
In the indexing monitor, I see the error Trex: Preparation failed: index operation
could anyone tell me what could be wrong?
Thanks,

Hi Christian,
thanks for your reply.
we are using 7.2 SP02. Do you think it could be the version that has some issues with custom mapping functions?
regards
Yao

Error code -22: Error while registering

Hi Guys.
I'm new to NW Mobile 7.1.
I'm able to run developed applications and see data on physical devices (PDAs).
I'm also able to deploy and run the same applications on the NWDS Client (Simulator) BUT SEE NO data, because It can't sync.
My question is very simple: How can I set up NWDS Mobile Client (Simulator) so I can get data?
When I get to the Device Information screen (NWDS Mobile Client Simulator),values for Device Name and Device Id are blank
After a sync, the folowing messages appear on my console:
Windows XP
messageReceived in ContainerSyncEventListener: Connected to the server   Level: 1
messageReceived in ContainerSyncEventListener: Sending logon data to server   Level: 1
messageReceived in ContainerSyncEventListener: Waiting for response from server   Level: 1
messageReceived in ContainerSyncEventListener: Receiving data from server   Level: 1
messageReceived in ContainerSyncEventListener: Error code -22: Error while registering
I know that it is a must to setup a Device Name with one that exists in DOE (then Device Id is assigned during registration with DOE). But how can I place a value on Device Name? Should I set it up? then, Is it by copying a .propierties file under a MI/Folder or something?
I can't navigate my applications on the simulator so I need to deploy the files to a physical device every time I build, and this obviously takes more time than just running it on the simulator.
In just a few words, it is driving me nuts.
Thank you in advance,
David.

Hi,
if you have used MI7.0 you expect: sync a device and it is registered. This does not work in Mi7.1
In MI7.1 you need to create a device for a user first, before you are able to sync and get data.
To do this, open the Mobile Administration Portal in MI7.1, go to Administration and create a device for your user. Once this is done, you need to Enable the device.
If the device is enabled, in status INITIAL and has the correct user assigned, you can sync this device with the MI server.
Hope this helps!
Regards,
Oliver

Error while registering database

Similar Messages

Maybe you are looking for