Error while registering systems in UWL

im getting the following error when trying to register the r3 system in the uwl administsartor.
Errors:
System R3Production: Thu Dec 11 12:32:01 GMT+05:30 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Dec 11 12:32:01 GMT+05:30 2008
(Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
Connect_PM  TYPE=A ASHOST=132.147.0.112 SYSNR=03 GWHOST=132.147.0.112 GWSERV=sapgw03 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       service 'sapgw03' unknown
TIME        Thu Dec 11 12:32:01 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      nixxhsl.cpp
LINE        776
DETAIL      NiHsLGetServNo: service name cached as unknown
COUNTER     2
and the r3 system is working fine in the sysytem administartiion support--when i test it with some sap transaction.
regards
Srinivas

dharmaji,
check if you have an entry for sapgw03 in your /etc/services file, if you had add it recently, restart your portal.
to check, wether the port is reachable from your portal server you can use in a command box on your portal server:
telnet <ip-address of backend> 3203
kr, achim

Similar Messages

  • Error while registering SAP ECC system in UWL systems

    hi,
    Error while registering SAP ECC system in UWL systems.
    Errors:
    System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008
    (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008
    (Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
    Connect_PM  TYPE=A ASHOST=132.147.0.112 SYSNR=00 GWHOST=132.147.0.112 GWSERV=sapgw00 PCS=1
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner '132.147.0.112:sapgw00' not reached
    TIME        Thu Nov 27 16:12:05 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2823
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       79
    ERRNO TEXT  A remote host refused an attempted connect operation.
    COUNTER     2
    Item type retrieval and registration requires a connection to the systems and may take a couple of minutes
    For each system, they are generated as the configuration named 'uwl.webflow.<system_alias>' or 'uwl.alert.<system_alias>'.
    After configuration changes in the backend system, you must re-register the system.
    regards.
    Srinivas.

    Hi,
    you can check few things prior proceeding:
    Does your connector test after adding your backend system in portal works fine?
    Did you define a system alias?
    Make sure your SSO is working,
    Also check your Jco detination webdynpro tab.
    Regards,
    Vamshi.

  • Error while registering Oracle JDBC Diagnosability Mbeans?

    Hi,
    I have installed Oracle 11g 11.1.0.6.0. I am facing problem while executing any command in sql Developer. Below the frame an error message is shown : Error while registering Oracle JDBC Diagnosability Mbeans? and while executing any query like 'select user from dual' error is generated saying connection in busy. I have made connection with system user.so, how to resolve this problem?
    Thanks

    There are a lot of information in listener.log file , some information i am posting .
    Each time i am opening Oracle SQL Developer programme, a error is generated , saying " oracle.jdbc.driver.OracleDriver     Error while registering Oracle JDBC Diagnosability MBean.".
    Though i can create a new connection and query database tables. But why this error message is generated each time i open Oracle SQL Developer?
    06-MAR-2010 20:02:19 * service_update * earth1 * 0
    Sat Mar 06 20:03:10 2010
    06-MAR-2010 20:03:10 * service_update * earth1 * 0
    06-MAR-2010 20:03:19 * service_update * earth1 * 0
    Sat Mar 06 20:03:43 2010
    06-MAR-2010 20:03:43 * service_update * earth1 * 0
    Sat Mar 06 20:04:16 2010
    06-MAR-2010 20:04:16 * service_update * earth1 * 0
    06-MAR-2010 20:04:17 * (CONNECT_DATA=(SID=EARTH1)(CID=(PROGRAM=F:\app\shyam\product\11.1.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe)(HOST=SHYAM-E23629982)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1360)) * establish * EARTH1 * 0
    06-MAR-2010 20:04:19 * service_update * earth1 * 0

  • "Error while registering the Java 2 Runtime Environment registry keys"

    "Error while registering the Java 2 Runtime Environment registry keys"
    I am getting the above error when trying to install the 1.3 JRE (installed with the 1.3 plug in which I need). As part of my development I have been installing and uninstalling the JRE multiple times. Then, I got the above error when trying to install it, and now it appears to be installed but I cannot uninstall it. When I try to uninstall it, it just remains, and when I try to install it again I get the above error. I have tried cleaning up all javasoft registry entries, but it doesnt seem to have helped. Can anyone help me either completely uninstall the JRE so I can do a clean install or help me get rid of the error above when I install. Is there some registry entries I should be looking at? Anything else? this is quite urgent as I need to test my applet with the plugin installed and not installed - and I currently cant uninstall it. Any ideas?
    Thanks for your help
    Aaron

    I am getting this same error message when trying to upgrade from 1.3.1_03 to 1.3.1_19.
    I have multiple versions of jre's and jdks on my machine.
    Anyone else seen this problem or know how to resolve it.

  • Error while registering SOA Composite

    Hi all
    I used OOTB AutoApproval composite and added mail stuff to that composite. And run the composite and deployed it successfully. I don't want approver, task should be auto-approved. But for other custom composite i deployed and registered the composite. But for this i cann't.
    can any one help on this.
    But i am not able to register it. I am getting below error while registering
    Exception in thread "Main Thread" oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/AutoApproval!1.2 due to The task ApprovalTask specified for the workflow composite default/AutoApproval!1.2 is not valid
    [java] at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
    [java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    [java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_1035_WLStub.registerWorkFlowDefinitionx(Unknown Source)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java] at java.lang.reflect.Method.invoke(Method.java:597)
    [java] at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    [java] at $Proxy2.registerWorkFlowDefinitionx(Unknown Source)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceDelegate.registerWorkFlowDefinition(Unknown Source)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java] at java.lang.reflect.Method.invoke(Method.java:597)
    [java] at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
    [java] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    [java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    [java] at weblogic.security.Security.runAs(Security.java:41)
    [java] at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
    [java] at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
    [java] at $Proxy3.registerWorkFlowDefinition(Unknown Source)
    [java] at oracle.iam.platformservice.workflowregclient.WorkflowRegistration.main(WorkflowRegistration.java:42)
    [java] Caused by: oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/AutoApproval!1.2 due to The task ApprovalTask specified for the workflow composite default/AutoApproval!1.2 is not valid
    [java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.mapWorkflow(WorkflowRepositoryImpl.java:132)
    [java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.registerWorkFlowDefinition(WorkflowRepositoryImpl.java:113)
    [java] at oracle.iam.platform.workflowservice.impl.WorkflowServiceImpl.registerWorkFlowDefinition(WorkflowServiceImpl.java:230)
    [java] at oracle.iam.platformservice.impl.WorkflowRegistrationServiceImpl.registerWorkFlowDefinition(WorkflowRegistrationServiceImpl.java:38)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB.registerWorkFlowDefinitionx(Unknown Source)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java] at java.lang.reflect.Method.invoke(Method.java:597)
    [java] at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    [java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    [java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    [java] at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
    [java] at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    [java] at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    [java] at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    [java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    [java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    [java] at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    [java] at $Proxy507.registerWorkFlowDefinitionx(Unknown Source)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.__WL_invoke(Unknown Source)
    [java] at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.registerWorkFlowDefinitionx(Unknown Source)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_WLSkel.invoke(Unknown Source)
    [java] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
    [java] at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
    [java] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:523)
    [java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    [java] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
    [java] at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:119)
    [java] at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    [java] at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    BUILD FAILED

    First of all you have modifed OOTB approval flow, why you are not going for custom approval flow with skip rule.
    Now
    Are you able to compile the workflow?
    before going to re - register follow proper steps.
    Also check the below link
    Metalink ID 1221305.1
    Custom Auto Approval flowflow in OIM
    Thanks,
    Kuldeep

  • Error while registering Oracle JDBC Diagnosability MBean

    Hi All,
    I get the following error (pasted at the end)when trying to use the OracleDriver class to create connections.
    I am using JDeveloper11g-11.1.1.2.0, and
    JDeveloper11g-11.1.1.2.0/wlserver_10.3/server/ext/jdbc/oracle/11g/ojdbc6.jar.
    I read other posts with similar errors; the recommendation was to update the jar to the latest patch. But that still does not seem to work.
    Any help/pointers appreciated.
    Thanks
    Meera
    ------------ Error trace ----------------------------------------------------
    SEVERE: Error while registering Oracle JDBC Diagnosability MBean.
    java.security.AccessControlException: access denied (javax.management.MBeanTrustPermission register)
         at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
         at java.lang.SecurityManager.checkPermission(SecurityManager.java:568)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.checkMBeanTrustPermission(DefaultMBeanServerInterceptor.java:1824)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:310)
         at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
         at oracle.jdbc.driver.OracleDriver.registerMBeans(OracleDriver.java:345)
         at oracle.jdbc.driver.OracleDriver$1.run(OracleDriver.java:197)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.jdbc.driver.OracleDriver.<clinit>(OracleDriver.java:193)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:169)
         at oracle.communications.brm.pdc.server.transfomation.CrossReferenceDBConnectionObj.initializeConnection(Unknown Source)
         at oracle.communications.brm.pdc.server.transfomation.CrossReferenceHandler.<init>(Unknown Source)
         at oracle.communications.brm.pdc.server.transfomation.RRE_TransformationEngine.createWorkItemProcessors(Unknown Source)
         at oracle.communications.brm.pdc.server.junit.RRE_TransformationEngineTests.testCreateWorkItemProcessors(Unknown Source)
         at oracle.communications.brm.pdc.server.junit.RRE_TransformationEngineTests.testMain(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44)
         at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15)
         at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41)
         at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:20)
         at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
         at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
         at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:73)
         at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:46)
         at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
         at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
         at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
         at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
         at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
         at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
         at org.junit.runners.Suite.runChild(Suite.java:115)
         at org.junit.runners.Suite.runChild(Suite.java:23)
         at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
         at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
         at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
         at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
         at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
         at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
         at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39)
         at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:421)
         at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:912)
         at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:766)

    Hi,
    did you enable the permission at the jvm level?
    its' done by adding the following lines to your java.policy file under <JRE_HOME>/lib/security
    grant {
    // JMX Java Management eXtensions
    permission javax.management.MBeanTrustPermission "register";
    ciao,
    Giovanni
    P.S. This solution was taken from http://forums.sun.com/thread.jspa?threadID=491124

  • Error while registering Oracle JDBC Diagnosability MBean - version 1.2.1

    Hi,
    I am running version 1.2.1 of SQL Developer (build MAIN-32.13). I have a local copy of Oracle 11g running on Windows XP. I am running version 1.6.0_03 of java.
    When I fire it up, I get the following message in the "logging page - log" pane:
    Source: oracle.jdbc.driver.OracleDriver
    Message: Error while registering Oracle JDBC Diagnosability MBean.
    Is this something I should worry about?
    Graham

    I got the same thing using SQLDeveloper shipped with 11g. It is every annoying since sqlplusw.exe is not available anymore, neither iSQLPLUS or SQLPLUS.exe is good enough all of the sudden that I found not much choice of accessing the database on windows ...

  • Error while registering for index relevant events: Invalid RID: No reposito

    Hi,
        I created an index and assigned a datasource to search the Windows network drive. I activated the index and now when I am  monitoring the application log, I see the error <b>Error while registering for index relevant events: Invalid RID: No repository manager found for prefix: and XIndexing documents failed. AbstractTrexIndex: indexing some of the resources failed Continue crawling and Indexing document failed. Access denied </b> for the <b>IndexmanagementService</b>.
    When I see the queue status, the queue status is always idle, even after I activate the queue.
    In the indexing monitor, I see the error <b>Trex: Preparation failed: index operation</b>
    could anyone tell me what could be wrong?
    Thanks,

    Hi Christian,
    thanks for your reply.
    we are using 7.2 SP02. Do you think it could be the version that has some issues with custom mapping functions?
    regards
    Yao

  • Error code -22: Error while registering

    Hi Guys.
    I'm new to NW Mobile 7.1.
    I'm able to run developed applications and see data on physical devices (PDAs).
    I'm also able to deploy and run the same applications on the NWDS Client (Simulator) BUT SEE NO data, because It can't sync.
    My question is very simple: How can I set up NWDS Mobile Client (Simulator) so I can get data?
    When I get to the Device Information screen (NWDS Mobile Client Simulator),values for Device Name and Device Id are blank
    After a sync, the folowing messages appear on my console:
    Windows XP
    messageReceived in ContainerSyncEventListener: Connected to the server   Level: 1
    messageReceived in ContainerSyncEventListener: Sending logon data to server   Level: 1
    messageReceived in ContainerSyncEventListener: Waiting for response from server   Level: 1
    messageReceived in ContainerSyncEventListener: Receiving data from server   Level: 1
    messageReceived in ContainerSyncEventListener: Error code -22: Error while registering
    I know that it is a must to setup a Device Name with one that exists in DOE (then Device Id is assigned during registration with DOE). But how can I place a value on Device Name? Should I set it up? then, Is it by copying a .propierties file under a MI/Folder or something?
    I can't navigate my applications on the simulator so I need to deploy the files to a physical device every time I build, and this obviously takes more time than just running it on the simulator.
    In just a few words, it is driving me nuts.
    Thank you in advance,
    David.

    Hi,
    if you have used MI7.0 you expect: sync a device and it is registered. This does not work in Mi7.1
    In MI7.1 you need to create a device for a user first, before you are able to sync and get data.
    To do this, open the Mobile Administration Portal in MI7.1, go to Administration and create a device for your user. Once this is done, you need to Enable the device.
    If the device is enabled, in status INITIAL and has the correct user assigned, you can sync this device with the MI server.
    Hope this helps!
    Regards,
    Oliver

  • Error while Registering the Database with Catalog..

    I m creating recovery catalog in same database, and getting the errors.
    1. I have created TOOLS tablespace
    2.CREATE USER RMAN2
    SQL> CREATE USER rman IDENTIFIED BY cat
    2 TEMPORARY TABLESPACE temp
    3 DEFAULT TABLESPACE tools
    4 QUOTA UNLIMITED ON tools;
    CREATE USER rman IDENTIFIED BY cat
    ERROR at line 1:
    ORA-01920: user name 'RMAN' conflicts with another user or role name
    SQL> ed
    Wrote file afiedt.buf
    1 CREATE USER rman2 IDENTIFIED BY cat
    2 TEMPORARY TABLESPACE temp
    3 DEFAULT TABLESPACE tools
    4* QUOTA UNLIMITED ON tools
    SQL> /
    User created.
    3. GRANT RECOVERY_CATALOG_OWNER
    SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
    Grant succeeded.
    4. To create the recovery catalog:
    1. Connect to the database that will contain the catalog as the catalog owner.
    H:\>rman catalog rman2/cat@rock
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to recovery catalog database
    2. Run the CREATE CATALOG command to create the catalog.
    RMAN> CREATE CATALOG;
    recovery catalog created
    3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
    H:\>sqlplus
    SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter user-name: rman2/cat
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select count(*) from cat;
    COUNT(*)
    91
    SQL> ed
    Wrote file afiedt.buf
    1 select owner, table_name, tablespace_name
    2 from dba_tables
    3* where table_name='DB'
    SQL> /
    OWNER TABLE_NAME
    TABLESPACE_NAME
    RMAN2 DB
    TOOLS
    RMAN DB
    ABAMCO_TEST
    Next step is to registering the Database in the Recovery Catalog.
    Registering a Database in the Recovery Catalog
    H:\>rman TARGET / CATALOG rman2/cat@rock
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-04005: error from target database:
    ORA-01031: insufficient privileges
    I m getting above error while registering the Database with Catalog,
    Can anybody help me how can I register the Database with Catalog.????
    Waiting for Reply!!!!!!!

    Dear Manoj I can log in at TARGET Database.
    H:\>rman
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    RMAN> connect target sys/rock
    connected to target database: ROCK (DBID=3255117147)
    RMAN>
    ============================================================
    USING CONNECT STRING as you said.
    H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
    Argument Value Description
    target quoted-string connect-string for target database
    catalog quoted-string connect-string for recovery catalog
    nocatalog none if specified, then no recovery catalog
    cmdfile quoted-string name of input command file
    log quoted-string name of output message log file
    trace quoted-string name of output debugging message log file
    append none if specified, log is opened in append mode
    debug optional-args activate debugging
    msgno none show RMAN-nnnn prefix for all messages
    send quoted-string send a command to the media manager
    pipe string building block for pipe names
    timeout integer number of seconds to wait for pipe input
    checksyntax none check the command file for syntax errors
    Both single and double quotes (' or ") are accepted for a quoted-string.
    Quotes are not required unless the string contains embedded white-space.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00552: syntax error in command line arguments
    RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
    RMAN-01007: at line 0 column 16 file: command line arguments
    H:\>rman
    It didnt work either.
    I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

  • Error while registering the Concurrent Program

    Hi,
    I am getting the following error while registering the concurrent program.
    The executable is registered as shell script and this executable sends a mail with attachment. can any one of you tell me the cause of the error?
    ORA-20160: ORACLE error -4091 in SUBMIT: others
    Cause: SUBMIT: others failed due to ORA-04091: table APPLSYS.FND_CONCURRENT_PROGRAMS is mutating, trigger/function may not see it.
    The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
    ORA-06512: at "APPS.ALR_FND_CONCURRENT_PROGRAM_IAR", line 1
    ORA-04088: error during execution of trigger 'APPS.ALR_FND_CONCURRENT_PROGRAM_IAR'
    ORA-06512: at "APPS.FND_CONCURRENT_PROGRAMS_PKG", line 63
    FRM-40735: ON-INSERT trigger raised unhandled exception ORA-20160.
    Thanks in advance

    Check Note: 391795.1 - Frm-40735: On-Insert Trigger Raised Unhandled Exception Ora-04062 in APPS.FND_CONCURRENT_PROGRAMS_PKG
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391795.1

  • Error while Registering

    Hi All,
    When I am trying to sync my Mobile Client to the Middleware, I am getting this error:
    ERROR: Error occured on server: "Error while Registering"; error Code 22
    ERROR: Error occured on server: "Error while Registering"; error Code 22
    <b>Syncronization Successful</b>
    Can anybody suggest me why this is happening?
    Ankur

    Hi Ankur
       Are you by any chance using Mobile 7.1 client? In that case this error occurs when you havent registered the client device before synchronizing.  Registeration should be done in the Web Dynpro Portal available in the server and once you have successfully registered the device, sync from the client.  This might solve the issue.
    Best Regards
    Sivakumar.

  • Error while registering SMS portlet

    Hi,
    portal version 9.0.4.0.99
    I am getting the following error while registering SMS portlet using the external application SMSExternalApp.
    SOAP: Caught SOAPException (SOAP-ENV:Client): For input string: "3782 "
    [java.lang.NumberFormatException]
    Illegal External Application data, Could not authenticate the user to the Push
    Service. Please reenter the correct External Application data for authentication
    I followed the instructions as per "Installation Guide for SMS Portlet Beta" available in OTN. I was able to deploy the SMS Portlet provider but while publishing the SMS portlet and creating the external application "SMSExternalApp" it fails. Please let me know what is the cause for this error.

    Hi Ramya,
    In order to be able to use the OracleAS Portlet for SMS, you need to get yourself a trial/registered account with the OracleAS Wireless Service Team:
    http://www.oracle.com/technology/tech/wireless/messaging.htm
    Once you have created an account, you can use the access codes specified by the wireless team, for the username/password fields.
    Thanks,
    Harsha

  • Error while registering JDBC and some more problems (11g)

    Hi there.
    I'm new here and using Oracle,I've been studying SQL Server at the school and I'm going to have Oracle 9i lessons soon.
    I've installed Oracle 11g here but things aren't going well yet.
    When I open Oracle SQL Developer,I have the message "Error while registering JDBC Diagnosability MrBean.
    When I try to do a connection with SQL Developer I have the error "The network device could not establish the connection",I have an Oracle 11g Book reference for studies,and I'm doing exactly how it shows me. (maybe it will happen until the first problem be solved)
    The last one,when I use SQL Plus I can't get a sucessfull login.After the installation I could with scott and SYSMAN,but after a reboot I can't any longer.
    How can I get it working now?
    thanks

    Well I don't know what happened but it's working now. I did an ipconfig and noticed that the IP address was incorrect. The gateay IP address was also incorrect. I changed it to the values posted in ipconfig. I opened up SQL Developer and was then able to make the connection. I went back and changed the IP addresses back to the old values. I then opened up SQL Developer again. I was expecting to see the refuded connection message but instead it connected. I have no idea what to think now. Can SQL Developer connect to a non local database?
    I tried to connect to another remote SQL Server but got xxxx invalid username for some reason. I know the username/password is correct.
    Lastly, I tried to do a quick migration of a simple table. It stops at the generate step. After hitting close buton. It asks to log back onto SQL Server.
    I noticed that the schema being used gets created with dbo_schemaname
    i.e. scott would be user dbo_scott
    I tried to create a user called dbo_scott and it still stopped at the generate step.
    Any ideas? Thanks for your help

  • Error while registering ESB using Jdeveloper , SOA SUITE,XE on XP

    I get the following error while registering the ESB.
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2008-05-08T15:48:18.940-05:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>tip</COMPONENT_ID>
    <MSG_TYPE TYPE="TRACE"></MSG_TYPE>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>usolpathak</HOST_ID>
    <HOST_NWADDR>10.100.3.47</HOST_NWADDR>
    <MODULE_ID>esb.server.bootstrap</MODULE_ID>
    <THREAD_ID>15</THREAD_ID>
    <USER_ID>apathak</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>10.100.3.47:97616:1210277752560:1348</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>ESB bootstrap: Pinging URL "http://null:null/esb/ESBConsoleMain.html" to test completion of application server startup</MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>

    Hi,
    The ESB server tests its connection to the ESB console at startup. If you look at the MSG_TEXT, you will see the hostname and port of the URL the ESB server is using are both set to null. I haven't seen this before, but it looks like your installation isn't quite right.
    Does the BPEL server work or the Application Server console ?
    Regards,
    Ben

Maybe you are looking for

  • How to get self in a JDialog button action method?

    The following code is written in the init() of a JDialog(jdialog1). I want to create another JDialog(jdialog2) when the user clicks a button in jdialog1. but i couldn't get jdialog1 itself to form the parameters of creating jdialog2. i.e. 'this' in t

  • How to change cost center in asset master data through mass changes

    Hi sap gurus, Hi i have 20 assets i have to change the cost center through mass changes provide the solution. regards, ramanjaneyulu.

  • Why when I ckick on an email tab I get click.email in Firefox address line?

    Most of the time when I click on a tab in an email in Thunderbird, Firefox comes up with "http://click.email" instesd of "http://www." like it should. Some ot the times I can take out the "click.email" and type in "www." and it will go through, but m

  • Slideshow captions in Lightroom

    Is there a way to add captions to images in LR other than the add caption in the slideshow module which adds a very blocky generic caption in quotes that is not usually as appealing as the image.  It is on of the few drawbacks to the program I have f

  • ORA-22813 error when deleting spatial objects in LIVE

    Hi, We are getting an ORA-22813 error when attempting to delete a spatial object from a version-enabled table in workspace LIVE. The spatial object to be removed has a SDO type of multipolygon. The geometry information consists of 4 rings with a comb