Error while release of production order u201CNext period is not openu201D

Hi Experts,
Need your opinions on this issue where my client is facing a problem while create and release a production Order on the last day of the month (Last day of period change).
While create and release of production order for Plant xxxx, system uses to give the error; period Next (e.g. 12) is not open. Same thing if I have created the order using T. code CO01; but when I tried to release and save the order through T. code CO02 then it gave me the same error (Next period is not Open), it checks for the next period to open.
The above scenario happens only on last day of the month. Earlier this kind of error was not there so the question is why the period check is happening while saving the production order.
After speaking to the user, it is determined that they are facing this problem since upgrade (Since last 8 month). Hence need to check what additional check has been implemented with upgrade from R/3 4.7 to ECC 6.
Error Message No F5201
Appreciate your help how to dig up this issue.
With Regards
Anant

Hi Guys,
Please throw some light why on the last day of the month (Last day of period change) at the time of release the order user is getting error: Period Next (FI Next period) is not open ( message No. F5201).
My question is why system carried out period checks at the time of release of Production Order.
With Regards
Anant

Similar Messages

  • Serial number error while creating the production order

    Hello frds,
    I am getting the following error while creating the production order.
    "Item 000000 requires exactly 100 serial numbers for the asset".
    If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
    I have tried using the new serial number profile also, but it is giving same error.
    Kindly guide.
    Regards,
    Narendra Bora

    Dear Narendra
    Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
    Procd Procedure description Ser.Usage
    PPRL PP order release 02
    since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
    Regards
    Soundar

  • Error While saving the Production Order

    Dear Experts
    Pls let me know why am getting the below error while saving the production order after release..
    PSFC_STD_LAYOUT does not exist
    Message no. SSFCOMPOSER004

    Dear,
    Please check have you assigned the scheduling profile in work scheduling view of materail master?
    Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
    Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
    Regards,
    R.Brahmankar

  • Error when release the production order

    Hi all,
    while release the production order i am getting the error :-   Plant 1000 is not the only plant assigned to valuation area 1000 , how to resolve this error .
    & can we release the prod order without calculating the cost ?
    Thanks & regards
    satish

    Hello,
    I'm facing the same issue when trying to create a production order using tran. CO01 with inputs (Material:  P-100, Production plant: 1000, Order type: PP01. Next the total quatity of material is chosen freely, Dates/start is set to todays date, Scheduling is set to Forwards scheduling).
    Error message :
    "Plant 1000 is not the only plant assigned to valuation area 1000"
    Message no. CK238
    As explanation SAP says:
    "Diagnosis
    You are attempting to use material costing or order costing. However, the system has determined that plant 1000 is not the only plant assigned to valuation area 1000.
    Costing is only possible when each plant has its own valuation area to which no other plants are assigned.
    System Response
    It is not possible to cost in your system.
    Procedure for System Administration
    Go into Customizing for the Corporate Structure and check the valuation level. The valuation level must be the plant level"
    The error message implies that the user is not given the opportunity to create and save a production order.
    I have secured the followings:
    1. Valuation level is set to Plant level so that the valuation is now done at plant level. (The other option was at Company code level, which is not checked.)
    Question:
    Is there a solution to this problem?
    Thanks and Regards!
    Edited by: WilliamG on Feb 16, 2010 4:04 PM

  • Error during release of production order - AFS Specific

    Hi SAP gurus,
    Iam getting error during release of production order in AFS specific system during COHV transaction. Error is ''Error calling ATP server'' and message no is AG022. But when we read the PP master data then this error is cleared and production order is released.
    Thanks & Regards,
    N. Laxman

    hi
    1. When mass conversion of AFS planned order to production order is performed via COHV, the resulting production order does not contain the SKU details of the component.
    2. When a planned order is converted to a production order & an ATP is carried out on the production order, Message no.AG022 - 'An error occurred during Remote Function call on the ATP Server' is issued by the system.
    so you need to use the note 1087613.
    read the note and apply with the help of technical team ABAP and BASIS
    -ashok

  • Error while releasing the Process order

    while releasing the Process order i am getting the follwing error message
    Message no. CO118      Release of order not possible
    Cna you Please any body explain me detail of thi error ie where the error lies.
    Thanks

    Hi,
    In Process Order Header Screen Go to ---> Log ---> On Release.Here you will find the detail error behind this problem.Go though it .Resolve it and then try to release the Process Order, and if required get back to us.
    Suppose reason may be,
    - Missing part
    - Missing Capacity
    - Batch Determination is required to perform.
    - Any User Exit (Other then std. SAP)
    Regards,
    Dhaval

  • Problem while releasing the production order.

    Hai gurus,
    When i release the production order , SAP doesn't block when i have a deficit of stock for some materails.I checked all the customizing and found every thing is fine.
    As the materials that has defict stock has back flush indicator, is that the reason why the system is assuming the stock when releasing.

    Hi,
    You need to consider the following customization settings
    (1) OPJK - For the Plant/Order type/Availability check-2 for the material availability - Release material - set the indicator '3' No release if parts are missing
    (2) OPJJ - For availability check & checking rule - check what all elements are considered as part of ATP check.
    With these settings - in the production order if the order header has status MSPT - Missing parts (i.e. components are missing) only then system will stop the release of the order.
    I hope this addresses your query
    Warm regards,
    Umesh

  • Co- Product Error while creating a production order

    Hi,
    While performing the Co-Products Approtionment at the time of creation of Production order..
    we are facing a problem regarding cost apportionment I have crated a Source Structure and the cost element is assigned to that Source Structure but still iam facing this issue
    kindly help me out.
    the error msg is
    Debit with cost element 9460404 cannot be settled.
    Message no. KD549
    Diagnosis
    Costs/revenues exist for cost/revenue element 9460404.  This cost/revenue element was given source assignment 40 in the source structure (-> settlement rule for sender -> parameters).  However, there is no distribution rule with settlement type FUL for this source assignment or the total of the percentages for the rules is less than 100.
    Note:
    Full settlement settles all the costs and revenues which have occurred up to the settlement period and have not already been settled. In the case of periodic settlement, you can configure the settlement profile so that all the costs occurring in the settlement period are settled, or if an amount less than 100% can be settled.
    Procedure
    Maintain the distribution rules for source assignment 40 and settlement type FUL or use periodic settlement to settle less than 100%.  Change the settlement profile for the sender as necessary.
    Change settlement profile
    Note:
    Cost and revenue elements receive source assignment " " if you have not entered a source structure in the settlement rule parameters.

    Hi Krishna Murthy I went through the note but i couldnt recive a big help from that note.
    I will explain the step by step process that i have done.
    I am attaching the Screen shots of the issue.
    1. For co-products I have created a source structure and Sec. Cost Elements were assigned in the source structure.
    2. The source structure was assigned in the Material Master for co-products equally distrubuting the amount between 2 materials.
    3. When we are trying to create a production order the error was displayed but the costs was getting calculated properly.
    4. When I was settling the production order the same error was getting displayed.
    I have tried various methods to resolve it.
    1. I have created a periodic settlement rule and tried to settle but it didnt work
    2. I have assigned the source structure in the settlement profile this also didnt work.

  • Run time error while saving the production order in CO02

    HI Experts,
    While i am releasing and saving the production order the system is giving the runtime error. Please help.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_SLD_API_EXCEPTION
    Error analysis is
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SLD_API_EXCEPTION', was not
    caught in
    procedure "GET_ACCESS_DATA" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Internal error in method
    A Quick response is required.
    Regards
    Dinakar Sarma

    Hi,
    Please check below  link for your issue , it may useful
    http://forums.sdn.sap.com/thread.jspa?messageID=10815298#10815298
    Regards,
    Ram

  • Error while Closing the Production order.

    Hi ,
      We are doing operation Subcontracting Process. This process works on the basis of Production order, once the Production order generated automatically system generates a Purchase requisition which we are converting to Purchase order  and doing the sub contracting process.
    Now i have received all the material from the Subcontractor ( GRN and MIRO ) has been completed , for the Production order all the confimration and Delivery has also been completed , now i have done Technically completion for that order , now i am closing the Order ( Functions -Restrict processing - close ) , while closing it gives me an error saying that Purchase order still exists .
    Wat is this error ?? why is it coming so ??
    Regards
    Rajesh

    hi,
    You have to ensure that the order is not having any WIP, if you have any WIP for that order you have to complete the order and then only you could abale to clsoe the order.
    Check the WIP for the order thorugh KKAX.
    Regards,
    Rama Mohan

  • Error while closing a production order

    Hi
       I have raised a production order for 10 products.I have a confirmed yeild of 11 products.I have a overdue tolerance of 10% for that semi finished good.Even then it is not allowing to TECO the order.Why
    regards,
    PradeepM.

    Actual problem in my case is like
    1. there are 4 operations in the semi finished good that is produced
    2.In first operation some products are produced in extra then actually required
    3.In second operation the extra quantity produced is scrapped
    4.The final quantity confirmed for the required product is same as the ordered quantiy
    Even then it is showing an error message GR quantity is more than confirmed quantity when trying to TECO the order.
    how to correct this error
    regards,
    PradeepM.

  • Error while creating a production order

    Dear PP gurus
    I am trying to create a production order of a material  through CO01 , I am getting a error   05.05.2016 date comes after end of valid factory calendar. (Please correct
    Although  for all other  material , no error is coming.
    My factory calender is till 2015, but i am not able to understand why and how it is capturing the above date.
    please help me how to correct it?
    Thanks in advance
    Regards

    Dear Aadi,
    When your in operations screen
    Extras > Scheduling > Schedule > operation overview = operation segments > Click on Gang chat icon
    it should show you the days for ur base qty
    then click on scheduling results then click on update material master & save
    then Go to CA96
    input plant
    then mark a tick for ur material & click on update material master icon
    then check in material master work scheduling view
    Regards
    Madhu

  • Error while releasing the service order .

    Hi,
    After creating sales order from service order (ZOR3), when I am trying to release the service order by clicking on the green flag it is giving me error 'WBS for the Variant Service Line selected does not exist'.
    Kindly advice a solution.
    regards,
    SDG

    What is the error message number ??  If it starts with "Z", then through some user exit, this control is applied which you have to check with your ABAPer on the coding.
    thanks
    G. Lakshmipathi

  • WM error  while creation of production order.

    Hi ,
    I am trying to create a production order . I am getting below error in log as"Movement type for production supply missing in whse 112, storage type SHP" .
    Can anybody tell me which movement type i am missing here ?
    Regards
    Rohit Chavan

    In OMK0, click on Assign & check if you have assigned mvt. type 319 for the w/h - storage type combination.

  • Getting error while processing EDIFACT-D96A-ORDERS.. Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND

    Hi Anuj & All,
        I'm trying to create an outbound scenario with EDIFACT-D96A-ORDERS. A simple SOA composite application polling data from DB and through B2B adapter 'send' option provides data to B2B system.
    Set up two partner profiles like this,
    Host:
    Name: HTP
    EDI Group ID: HTP
    EDI Interchange ID: Interchange Sen
    EDI Interchange ID Qualifier: 01
    Remote:
    Name: RTP
    EDI Group ID: RTP
    EDI Interchange ID: Interchange Rec
    EDI Interchange ID Qualifier: 01
    Other settings are as usual. Delivery channel of generic file created on RTH.
    Now, few documents settings on B2B console are like this,
    D96A-> Interchange tab
    Create UNA: Never
    ORDERS-> Transaction
    Functional Group Identifier Code: ORDERS
    Controlling Agency: UN
    - other properties are unchanged.
    On SOA side, the bpel invoke activity which calls B2B adapter has following properties:
    <invoke name="InvokeOrders"
      inputVariable="InvokeOrders_send_InputVariable"
      partnerLink="D96A.ORDERS" portType="ns2:send_ptt"
      operation="send" bpelx:invokeAsDetail="no">
    <bpelx:inputProperty name="b2b.toTradingPartnerIdType"
        expression="'NAME'"/>
    <bpelx:inputProperty name="b2b.toTradingPartnerId"
        expression="'RTP'"/>
    <bpelx:inputProperty name="b2b.messageType" expression="1"/>
    <bpelx:inputProperty name="b2b.messageId" variable="messageID"/>
    <bpelx:inputProperty name="b2b.fromTradingPartnerIdType"
        expression="'NAME'"/>
    <bpelx:inputProperty name="b2b.fromTradingPartnerId"
        expression="'HTP'"/>
    <bpelx:inputProperty name="b2b.documentTypeName"
        expression="'ORDERS'"/>
    <bpelx:inputProperty name="b2b.documentProtocolVersion"
        expression="'D96A'"/>
    <bpelx:inputProperty name="b2b.documentProtocolName"
        expression="'EDIFACT'"/>
    <bpelx:inputProperty name="b2b.documentDefinitionName"
        expression="'ORDERS_def'"/>
    <bpelx:inputProperty name="b2b.conversationId"
        variable="ConversationID"/>
    </invoke>
    The error I'm getting on B2B Console->Reports->Business Message, while running this is,
    Error Code B2B-50547
    Error Description Machine Info: (htp01310-vm01.htp.com) Description: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
    Error Level ERROR_LEVEL_COLLABORATION
    Error Severity ERROR
    Error Text Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
    Note: On Manage Deployment Tab I've checked the agreement is in active state.
    -- Business Message (Result):--
    State: MSG_ERROR
    Document Type: ORDERS
    Agreement: <blank>
    Sender: HTP
    Receiver: <blank>
    -- Application Message (Result):--
    Sender Id Type: NAME
    Sender Value: TCS
    Receiver Id Type: NAME
    Receiver Value: ORCL
    Document Type: ORDERS
    Document Definition: ORDERS_def
    Document Protocol Name: EDIFACT
    Document Protocol Version: D96A
    Direction: OUTBOUND
    State: MSG_COMPLETE
    - Can anybody please shoot some pointer on how to resolve this? Please let me know if you need further configuration details which I've not mentioned here.
    Regards,
    - @bhijit

    Hi Mariusz,
        Thanks for your reply. Yes I think so, probably you're right. But finest trace level doesn't give much clues on "wrong mapped" data. Anyway, here is the detail log. Please don't forget to point out if you find something interesting.
    #### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
    > <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704092> <BEA-000000> <Error -:  B2B-50547:  Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
      at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
      at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
      at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
      at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
      at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
      at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
      at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
      at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
      at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
      at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
      at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
      at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Error -:  B2B-50547:  Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
      at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
      at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
      at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
      at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
      at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
      at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
      at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
      at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
      at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
      at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
      at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
      at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    >
    #### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
    > <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704569> <BEA-000000> <Error -:  B2B-50547:  Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
      at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
      at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
      at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
      at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
      at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
      at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
      at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
      at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
      at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
      at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
      at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
      at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Error -:  B2B-50547:  Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
      at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
      at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
      at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
      at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
      at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
      at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
      at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
      at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
      at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
      at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
      at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
      at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    >
    Rgds,
    - Abhijit
    P.S. - Can you please check what is the value of "Functional Group Identifier Code" for D96A ORDERS.

Maybe you are looking for