Error while running interface with different execution context.
Hi all,
I have created an Interface in one context and when change the context to another one it gives error while creating internal error tables.
It says table does not exist APPS.E$_XXCNV_CUST_BCUR_STG but there is no error while creating the table.
The actual issue is that context is coming as UNDEFINED in Loading Connection tab and Default connection has the earlier context.
This issue is not coming in all the interfaces only in few interfaces. The other interface runs successfully after changing the context.
Please let us know if you have faced such an issue and what could be the cause of context coming as UNDEFINED.
Hi,
Can you cross check the logical schema of the interface which is pointed on the corresponding context? If its pointed to wrong DB(Physical Schema) it will errored out UNDEFINED error.
Thanks,
Guru
Similar Messages
-
Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
SatishHi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
ORA-04062 error when running forms with different users
ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ; -
Hello Gurus,
I am getting error while executing an interface. This basically takes data from Oracle (Source) and loads into Excel CSV File(Target). The ODI version is 11.1.1.6.
But its failing at a step when its trying to Insert New rows in Target. Below is the error I am getting:
ODI-1227: Task Test2 (Integration) fails on the source SUNOPSIS_ENGINE connection SUNOPSIS_MEMORY_ENGINE.
Caused By: java.sql.SQLException: data exception: invalid interval format
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.JDBCPreparedStatement.fetchResult(Unknown Source)
at org.hsqldb.jdbc.JDBCPreparedStatement.executeQuery(Unknown Source)
at oracle.odi.query.JDBCTemplate.executeQuery(JDBCTemplate.java:189)
at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:89)
at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)any idea what might cause this?
Please help.
Thanks,
Santy.Thanks for reply.
No. If I try with the way you say, I am not getting same error.
I get below error in that case:
Caused By: java.sql.SQLException: ORA-30083: syntax error was found in interval value expression
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)Thanks,
Santy -
Dunning Error while Run Dunning with F150
Hi All
I have created Dunning procedure (name is PA12) with company code is PAUL
while Running with F150 I m getting below Error?
Forms for MAHNR 'PA12' , 'RBUKM': 'PAUl' KOART 'D' does not exit (T047E)
could anyone please explain what this error mean?
I need to print dunning report after log but getting above error message.
Looking forward advice and tips,
Thnx
Bobbybobbyplus1 wrote:
Hi All
>
> I have created Dunning procedure (name is PA12) with company code is PAUL
>
> while Running with F150 I m getting below Error?
>
> Forms for MAHNR 'PA12' , 'RBUKM': 'PAUl' KOART 'D' does not exit (T047E)
>
> could anyone please explain what this error mean?
>
> I need to print dunning report after log but getting above error message.
>
> Looking forward advice and tips,
>
> Thnx
>
> Bobby
Hi Bobby,
1. You may wish to check your settings under account payables/Dunning notice.
2. Make sure that none of the existing payment is yet to be posted.
3. Sometimes if you click on the red traffic light it may display some specific areas that suggest where the problem lies.
Regards
Muhammad -
Error while restoring database with different name on subscriber
Hi all,
I am using merge replication in sql server 2008R2. Yesterday I wanted to create a test environment, so
I did:
1. on publisher I restored from backup production db with another name ( lets call it TEST and new files
.mdf, .ldf and no switch KEEP_REPLICATION). After this step original replication between production
dbs worked fine.
2. on subscriber I did the same: restore as new db TEST with new
files .mdf, .ldf and no switch KEEP_REPLICATION.
Unfortunately I noticed, that after second step replication stopped. SQL agent replication job on Subscriber
is gone.
Why restoring db with new name did affect original replication?
Finally the most important: replication was set up by external company and I have to bring it to live now
but I don't know this subject so good. How can I do it?
Assuming, that there is no data change on subscriber in replicated tables is it enough when I select ‘reinitialize’
on Publisher and Subscriber?
Thanks in advance
ArturHello,
Sorry for late response, but I was out of the office during last week.
Regarding problem 1: restoring replication. I contacted guy who made originally our replication and he recreated subscription agent. So this is solved.
problem 2: why did it happen?
Lydia, in link which you provided I found only info about restoring db in replication, but I didn't want to restore replication.
I checked SQL Server and Server Agent logs and there were no entries on that time. The only entries are regarding db restoring. Below:
09/11/2014 12:45:59,Backup,Unknown,Database was restored: Database: Logik_ATData_TEST<c/> creation date(time): 2012/04/27(13:55:41)<c/> first LSN: 21392:66:267<c/> last LSN: 21392:227:1<c/> number of dump devices: 1<c/> device information: (FILE=1<c/> TYPE=DISK: {'D:\MSSQLBackup\Dzienny\Logik_ATData_PROD\Logik_ATData_PROD_backup_2014_09_10_231001_6391536.bak'}). Informational message. No user action required.
09/11/2014 12:45:59,Backup,Unknown,Restore is complete on database 'Logik_ATData_TEST'. The database is now available.
09/11/2014 12:45:59,spid72,Unknown,CHECKDB for database 'Logik_ATData_TEST' finished without errors on 2012-04-26 22:50:05.490 (local time). This is an informational message only; no user action is required.
09/11/2014 12:44:53,spid72,Unknown,Recovery is writing a checkpoint in database 'Logik_ATData_TEST' (13). This is an informational message only. No user action is required.
09/11/2014 12:44:53,spid72,Unknown,Starting up database 'Logik_ATData_TEST'.
09/11/2014 12:44:51,spid72,Unknown,The database 'Logik_ATData_TEST' is marked RESTORING and is in a state that does not allow recovery to be run.
09/11/2014 12:44:51,spid72,Unknown,Starting up database 'Logik_ATData_TEST'.
In Windows application log there were also no other entries, besides these above.
I also could not check job history, because the job was gone in SSMS jobs list, while the subscription was present in SSMS Replication with info, that last successful synchronization was at 12:42 (there is a 5 min. sync period).
I also don't understand how the job was deleted, because according this manual (http://www.mssqltips.com/sqlservertip/1803/auto-alert-for-sql-agent-jobs-when-they-are-enabled-or-disabled/) I have 2 triggers in sysjobs table and every time, when
job is deleted/disabled I got @ notification. In this case I got no @.
My SQL Server version:
Product_Version Product_Level Edition
10.50.2550.0 SP1 Standard Edition (64-bit)
Any idea what happened?
Thanks,
Artur -
Error while running application with Tomcat 5.0
Hi,
I am trying to run my application on Tomcat 5.0. I have java environment version 1.4
I am getting the following error during the server start up :
Mar 30, 2007 3:51:03 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Mar 30, 2007 3:51:03 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1047 ms
Mar 30, 2007 3:51:03 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Mar 30, 2007 3:51:03 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.0.28
Mar 30, 2007 3:51:03 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Mar 30, 2007 3:51:03 PM org.apache.catalina.core.StandardHost
getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
Mar 30, 2007 3:51:03 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Processing Context configuration file URL file:C:\Program
Files\Apache Sof
tware Foundation\Tomcat 5.0\conf\Catalina\localhost\admin.xml
Mar 30, 2007 3:51:04 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings',
returnNull=tru
e
Mar 30, 2007 3:51:04 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.action.ActionResources',
returnNul
l=true
Mar 30, 2007 3:51:05 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing,
config='org.apache.webapp.admin.ApplicationResources', retur
nNull=true
Mar 30, 2007 3:51:06 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Processing Context configuration file URL file:C:\Program
Files\Apache Sof
tware Foundation\Tomcat 5.0\conf\Catalina\localhost\balancer.xml
Mar 30, 2007 3:51:07 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Processing Context configuration file URL file:C:\Program
Files\Apache Sof
tware Foundation\Tomcat 5.0\conf\Catalina\localhost\manager.xml
Mar 30, 2007 3:51:07 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Installing web application at context path /jsp-examples from URL
file:C:\
Program Files\Apache Software Foundation\Tomcat 5.0\webapps\jsp-examples
Mar 30, 2007 3:51:07 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Installing web application at context path from URL
file:C:\Program Files
\Apache Software Foundation\Tomcat 5.0\webapps\ROOT
Mar 30, 2007 3:51:07 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Installing web application at context path /servlets-examples from
URL fil
e:C:\Program Files\Apache Software Foundation\Tomcat
5.0\webapps\servlets-exampl
es
Mar 30, 2007 3:51:07 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Installing web application at context path /tomcat-docs from URL
file:C:\P
rogram Files\Apache Software Foundation\Tomcat 5.0\webapps\tomcat-docs
Mar 30, 2007 3:51:07 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Installing web application at context path /webdav from URL
file:C:\Progra
m Files\Apache Software Foundation\Tomcat 5.0\webapps\webdav
Mar 30, 2007 3:51:07 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8080
Mar 30, 2007 3:51:07 PM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8009
Mar 30, 2007 3:51:07 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=C:\Program Files\Apache Software
Foundat
ion\Tomcat 5.0\conf\jk2.properties
Mar 30, 2007 3:51:08 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 4266 ms
Mar 30, 2007 3:53:07 PM org.apache.catalina.core.StandardHostDeployer
install
INFO: Installing web application at context path /Hyperceller from URL
file:C:\P
rogram Files\Apache Software Foundation\Tomcat 5.0\webapps\Hyperceller
Mar 30, 2007 3:53:08 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings',
returnNull=tru
e
Mar 30, 2007 3:53:08 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.action.ActionResources',
returnNul
l=true
Mar 30, 2007 3:53:09 PM org.apache.commons.digester.Digester
startElement
SEVERE: Begin event threw exception
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
org.apache.commons.beanutils.PropertyUtils.setSimpleProperty(Property
Utils.java:1656)
at
org.apache.commons.beanutils.PropertyUtils.setNestedProperty(Property
Utils.java:1551)
at
org.apache.commons.beanutils.PropertyUtils.setProperty(PropertyUtils.
java:1580)
at
org.apache.commons.beanutils.BeanUtils.setProperty(BeanUtils.java:919
at
org.apache.commons.beanutils.BeanUtils.populate(BeanUtils.java:726)
at
org.apache.commons.digester.SetPropertiesRule.begin(SetPropertiesRule
.java:251)
at org.apache.commons.digester.Rule.begin(Rule.java:152)
at
org.apache.commons.digester.Digester.startElement(Digester.java:1361)
at
org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Sour
ce)
at
org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(Unkn
own Source)
at
org.apache.xerces.impl.dtd.XMLDTDValidator.emptyElement(Unknown Sourc
e)
at
org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unkn
own Source)
at
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContent
Dispatcher.dispatch(Unknown Source)
at
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Un
known Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown
Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown
Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown
Source)
at
org.apache.commons.digester.Digester.parse(Digester.java:1647)
at
org.apache.struts.action.ActionServlet.parseModuleConfigFile(ActionSe
rvlet.java:1006)
at
org.apache.struts.action.ActionServlet.initModuleConfig(ActionServlet
.java:955)
at
org.apache.struts.action.ActionServlet.init(ActionServlet.java:470)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at
org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.
java:1029)
at
org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:86
2)
at
org.apache.catalina.core.StandardContext.loadOnStartup(StandardContex
t.java:4013)
at
org.apache.catalina.core.StandardContext.start(StandardContext.java:4
357)
at
org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase
.java:823)
at
org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:80
7)
at
org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at
org.apache.catalina.core.StandardHostDeployer.install(StandardHostDep
loyer.java:277)
at
org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
at
org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.j
ava:701)
at
org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432
at
org.apache.catalina.startup.HostConfig.check(HostConfig.java:1083)
at
org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java
:327)
at
org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl
eSupport.java:119)
at
org.apache.catalina.core.StandardHost.backgroundProcess(StandardHost.
java:800)
at
org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.p
rocessChildren(ContainerBase.java:1619)
at
org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.p
rocessChildren(ContainerBase.java:1628)
at
org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.r
un(ContainerBase.java:1608)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.UnsupportedClassVersionError:
com/hyperceller/form/LoginFor
m (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at
java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
3)
at
org.apache.catalina.loader.WebappClassLoader.findClassInternal(Webapp
ClassLoader.java:1634)
at
org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoa
der.java:860)
at
org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoa
der.java:1307)
at
org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoa
der.java:1189)
at
org.apache.struts.config.FormBeanConfig.formBeanClass(FormBeanConfig.
java:320)
at
org.apache.struts.config.FormBeanConfig.setType(FormBeanConfig.java:1
91)
... 46 more
Mar 30, 2007 3:53:09 PM org.apache.struts.action.ActionServlet
handleConfigExcep
tion
SEVERE: Parsing error processing resource path
java.lang.reflect.InvocationTargetException
at
org.apache.commons.digester.Digester.createSAXException(Digester.java
:2919)
at
org.apache.commons.digester.Digester.createSAXException(Digester.java
:2945)
at
org.apache.commons.digester.Digester.startElement(Digester.java:1364)
at
org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Sour
ce)
at
org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(Unkn
own Source)
at
org.apache.xerces.impl.dtd.XMLDTDValidator.emptyElement(Unknown Sourc
e)
at
org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unkn
own Source)
at
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContent
Dispatcher.dispatch(Unknown Source)
at
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Un
known Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown
Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown
Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown
Source)
at
org.apache.commons.digester.Digester.parse(Digester.java:1647)
at
org.apache.struts.action.ActionServlet.parseModuleConfigFile(ActionSe
rvlet.java:1006)
at
org.apache.struts.action.ActionServlet.initModuleConfig(ActionServlet
.java:955)
at
org.apache.struts.action.ActionServlet.init(ActionServlet.java:470)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at
org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.
java:1029)
at
org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:86
2)
at
org.apache.catalina.core.StandardContext.loadOnStartup(StandardContex
t.java:4013)
at
org.apache.catalina.core.StandardContext.start(StandardContext.java:4
357)
at
org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase
.java:823)
at
org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:80
7)
at
org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at
org.apache.catalina.core.StandardHostDeployer.install(StandardHostDep
loyer.java:277)
at
org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
at
org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.j
ava:701)
at
org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432
at
org.apache.catalina.startup.HostConfig.check(HostConfig.java:1083)
at
org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java
:327)
at
org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl
eSupport.java:119)
at
org.apache.catalina.core.StandardHost.backgroundProcess(StandardHost.
java:800)
at
org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.p
rocessChildren(ContainerBase.java:1619)
at
org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.p
rocessChildren(ContainerBase.java:1628)
at
org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.r
un(ContainerBase.java:1608)
at java.lang.Thread.run(Thread.java:534)
Mar 30, 2007 3:53:44 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings',
returnN
ull=true
Mar 30, 2007 3:53:44 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings',
returnNull=tru
e
Mar 30, 2007 3:53:44 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings',
returnN
ull=true
could anyone tell me what the problem may be???
Note: When I configure my application on the Tomcat 5.5 and java 1.5 then it runs fine. But the problem arises when I compile my code on the java 1.4 and run on the Tomcat 5.0
Thanks in advance!!I am sorry that I forgot to tell you that I am running a struts application. Struts 1.1
-
Error while running Dev60 with jdk 11711o
Dear OTN Members / Oracle Development Team.
Have any one tried it. Help required form Oracle Devlopemnt
Team.
hi i am using oracle8 OAS 4.0.7, Developer 6.0 production
with NT 4.0 and service Pack 3
when i try to run the form through jinitinator or JDK provided
with the package i get the following error.
running with jinitator
Oracle JInitiator version 1.1.7.11
Using JRE version 1.1.7.11o
User home directory = E:\WINNT\Profiles\Administrator
Proxy Configuration: no proxy
java.io.FileNotFoundException: \forms60\f60all.jar
at java.io.FileInputStream.<init>(FileInputStream.java:56)
at sun.net.www.protocol.file.FileURLConnection.connect(Compiled
Code)
at
sun.net.www.protocol.file.FileURLConnection.getInputStream(FileUR
LConnection.java:162)
at
sun.net.www.protocol.http.HttpURLConnection.openConnectionCheckRe
directs(Compiled Code)
at
sun.applet.AppletCache.getInputStream(AppletCache.java:588)
at
sun.applet.AppletResourceLoader.loadJar(AppletResourceLoader.java
171)
at sun.applet.JinitAppletPanel.loadJarFiles(Compiled
Code)
at sun.plugin.AppletViewer.loadJarFiles(Compiled Code)
at
sun.applet.JinitAppletPanel.runLoader(JinitAppletPanel.java:500)
at sun.applet.JinitAppletPanel.run(Compiled Code)
at java.lang.Thread.run(Thread.java:466)
and with JDK
Microsoft (R) VM for Java, 5.0 Release 5.0.0.3165
==============================================
? help
c clear
f run finalizers
g garbage collect
m memory usage
q quit
t thread list
==============================================
com.ms.security.SecurityExceptionEx[oracle/forms/engine/Main.init
]: cannot access file E:\WINNT\Java\.hotjava
at com/ms/security/permissions/FileIOPermission.check
at com/ms/security/PolicyEngine.deepCheck
at com/ms/security/PolicyEngine.checkPermission
at com/ms/security/StandardSecurityManager.chk
at com/ms/security/StandardSecurityManager.checkRead
at java/io/File.exists
at java/io/File.mkdirs
at sun/applet/AppletViewer.<clinit>
at java/lang/ClassLoader.findSystemClass
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
Error getting package information: sun/applet
com.ms.packagemanager.PackageManagerException: Package not
ound
at com/ms/packagemanager/PackageManager.getPackage
at
com/ms/security/SecurityClassLoader.getSecurityInfoFromPackage
at
com/ms/security/SecurityClassLoader.findPackageManagerClass
at
com/ms/security/SecurityClassLoader.findPackageManagerClass
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
java.lang.ClassNotFoundException: sun.applet.AppletViewer
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
what could be the problem have any one encountered this kind of
problem.
pls help required.
mobeen
nullDear OTN Members / Oracle Development Team.
Have any one tried it. Help required form Oracle Devlopemnt
Team.
hi i am using oracle8 OAS 4.0.7, Developer 6.0 production
with NT 4.0 and service Pack 3
when i try to run the form through jinitinator or JDK provided
with the package i get the following error.
running with jinitator
Oracle JInitiator version 1.1.7.11
Using JRE version 1.1.7.11o
User home directory = E:\WINNT\Profiles\Administrator
Proxy Configuration: no proxy
java.io.FileNotFoundException: \forms60\f60all.jar
at java.io.FileInputStream.<init>(FileInputStream.java:56)
at sun.net.www.protocol.file.FileURLConnection.connect(Compiled
Code)
at
sun.net.www.protocol.file.FileURLConnection.getInputStream(FileUR
LConnection.java:162)
at
sun.net.www.protocol.http.HttpURLConnection.openConnectionCheckRe
directs(Compiled Code)
at
sun.applet.AppletCache.getInputStream(AppletCache.java:588)
at
sun.applet.AppletResourceLoader.loadJar(AppletResourceLoader.java
171)
at sun.applet.JinitAppletPanel.loadJarFiles(Compiled
Code)
at sun.plugin.AppletViewer.loadJarFiles(Compiled Code)
at
sun.applet.JinitAppletPanel.runLoader(JinitAppletPanel.java:500)
at sun.applet.JinitAppletPanel.run(Compiled Code)
at java.lang.Thread.run(Thread.java:466)
and with JDK
Microsoft (R) VM for Java, 5.0 Release 5.0.0.3165
==============================================
? help
c clear
f run finalizers
g garbage collect
m memory usage
q quit
t thread list
==============================================
com.ms.security.SecurityExceptionEx[oracle/forms/engine/Main.init
]: cannot access file E:\WINNT\Java\.hotjava
at com/ms/security/permissions/FileIOPermission.check
at com/ms/security/PolicyEngine.deepCheck
at com/ms/security/PolicyEngine.checkPermission
at com/ms/security/StandardSecurityManager.chk
at com/ms/security/StandardSecurityManager.checkRead
at java/io/File.exists
at java/io/File.mkdirs
at sun/applet/AppletViewer.<clinit>
at java/lang/ClassLoader.findSystemClass
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
Error getting package information: sun/applet
com.ms.packagemanager.PackageManagerException: Package not
ound
at com/ms/packagemanager/PackageManager.getPackage
at
com/ms/security/SecurityClassLoader.getSecurityInfoFromPackage
at
com/ms/security/SecurityClassLoader.findPackageManagerClass
at
com/ms/security/SecurityClassLoader.findPackageManagerClass
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
java.lang.ClassNotFoundException: sun.applet.AppletViewer
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
what could be the problem have any one encountered this kind of
problem.
pls help required.
mobeen
null -
Error while running JSP with custom tag
I am trying to run a jsp with a tag and I am getting the following error when I run the jsp:
"Unable to open taglibrary /WEB-INF/jsp/mytaglib.tld : Parse Error in the tag library descriptor: External parameter entity "%(DOCTYPE);" has characters after markup."
I have no idea what this is, can anyone help me here?
tx
-ABIts difficult to tell without looking at your TLD file i.e. mytaglib.tld
However, a guess is that you may be refering to an invalid or otherwise corrupted DTD from your TLD.
Check that out.
The official DTD for TLDs in JSP 1.1 is http://java.sun.com/j2ee/dtds/web-jsptaglibrary_1_1.dtd
and the official DTD for TLDs in JSP 1.2 is http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd -
ODI Error: While running interface to perform Essbase ouline extraction
Hi All,
I have requiremnet to extract all dimensions from Essbase outline and put them into Flat Files.
I created Essbase and Flatfile model and reversed successfully.
I created interfaces for each dimension for extracting its metadata to flat file.
All the interfaces ran successfully except for Entity dimension and Cube_Data.
When i ran interface to extract Entity dimension i got the following error in "4 - Loading - SS_0 - Extract Metadata" step
com.hyperion.odi.essbase.ODIEssbaseException: Extract operation failed : Cannot perform cube view operation. Essbase Error(1012703): Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
Please help me resolve this.
Thanks,
Srinivas
Edited by: SRINIVAS_N on Apr 28, 2010 12:15 AMHi,
This is a problem on the essbase side of things and not an ODI issue, it usually means you have a problem with a formula in the outline of your database.
Cheers
John
http://john-goodwin.blogspot.com/ -
ERROR while running workbook with macros
Hi all
I am running a workbook which has macros in it and thus some buttons for different functions.
Whenever i click on a particular button which should give a new selection window, it is giving me an error as follows:-
" Microsoft Office Excel has encountered a problem and needs to close. We are sorry for the inconvenience."
Please help me out to resolve this issue.
Any help would be grateful.
Thanks,
Vikrant MahajanHi Vikrant,
You can check any of the below options. Hope it helps :
- Check if you have not opened any other excel in the background .
- Check Excel security settings and Macros settings via Office Button -> Excel Options -> Trust Center ->
Trust Center Settings-> Macro Settings
- Also try installing updated version of the MSExcel 2007 BI ADD-ON Patch and enable tha Macros.
- Update GUI patch.
Regards,
Akanksha -
Execution error while running rule in ERPI.
Hi,
I am facing error while, running the rule from the ERPI (workspace) , when i am checking the session in ODI, i am getting the error
where as in ODI there is no such logical schema HFM_TGT. i am doing the integration of EBS rel12 with Planning using the ERPI, ODI and FDQM.
I had created the Logical & physical schema for Planning, EBS and running through the context ERPI in ODI.
*"com.sunopsis.core.SnpsInexistantObjectException: There is no connection for this logical schema/context pair:HFM_TGT / ERPI*
at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContext(SnpConnect.java)
at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect(SnpConnect.java)
at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst(SnpSession.java)
at com.sunopsis.dwg.dbobj.SnpSession.getConLst(SnpSession.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)".
help me out the above mention issue. .
mail id : [email protected]
Regards,
Sudhir sinha.
Edited by: user13032900 on Jun 15, 2010 10:06 PMHi,
I am using the classical metadata method. for creating the metadata rule file, i am adding the dimension using the FDM mapping.
As the mapping rule is running with extract id , but in ODI it is giving the error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
Help me on the issue as, my objective is to extract the data from the ERP (EBS 12) through ERPI and load the data in the planning app through FDM.
Regards, -
I am getting below error while running adcfgclone on APPS tier
ERROR : Unable to set CLASSPATH
/corp_ex1/DRPM/drpmcomn/clone/bin/../jlib/classes111.zip: is missing
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_29475.err file for errors
i copied classes111.zip from IAS_HOME to COMMON_TOP . Now I am getting below error
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_30763.err file for errorsPlease post the details of the application release, database version and OS.
ERROR: context creation not completed successfully
This is a generic error, please check the log files for details about the error.
Thanks,
Hussein -
Error while running ejbc - Deployment time
Whilst trying to deploy my WSE through J2EE deploy tool i get the follwoing error:
Deployment failed on target Server localhost:4848 : Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
I am not using ejb as far as I'm aware. I have succesfully buit my WSE using asant with no compilation errors.
Here is copy of the code
package rcews;
import java.rmi.RemoteException;
import java.util.Vector;
import java.sql.*;
import javax.sql.DataSource;
//import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.xml.rpc.server.ServletEndpointContext;
import javax.xml.rpc.server.ServiceLifecycle;
import javax.xml.rpc.ServiceException;
public class RceWSImplementation implements RceWSInterface, ServiceLifecycle {
private DataSource ds;
ServletEndpointContext endPtCntxt;
public void init(Object context) throws ServiceException {
try {
endPtCntxt = (ServletEndpointContext) context;
InitialContext ic = new InitialContext();
// Specify the logical name of the database
// Obtain the DataSource object associated with the logical name
ds = (DataSource) ic.lookup("java:comp/env/jdbc/rcedstar");
ic.close();
} catch(NamingException ne) {
ne.printStackTrace();
throw new ServiceException("\nCannot initialise JNDI ENC\n", ne);
public String [] getSignals() throws RemoteException {
Statement sqlStmnt;
ResultSet rs;
String countQuery = "SELECT COUNT(DISTINCT signal_ref) FROM tblSignals";
String query = "SELECT DISTINCT signal_ref FROM tblSignals ORDER BY signal_ref";
String[] signals = null;
int count = 0;
try {
// Establish connection with the database and return a Connection object
Connection con = ds.getConnection();
System.out.println("Connection made Successfully");
// Create and execute SQL statement
sqlStmnt = con.createStatement();
rs = sqlStmnt.executeQuery(countQuery);
if(rs.next()) {
int size = rs.getInt(0);
signals = new String[size];
rs = sqlStmnt.executeQuery(query);
// Move through ResultSet and pull singal reference information
while(rs.next()) {
signals[count] = rs.getString("signal_ref");
count++;
con.close();
} catch (Exception e) {
e.printStackTrace();
return signals;
public Vector getLampDurations(String[] signal_refs, String[] lamps, int hours) throws RemoteException {
// Varaible Declarations
Vector details = null;
String signals, lamp_colours;
PreparedStatement psqlStmt;
ResultSet rs;
String query = "SELECT signal_ref, light, SUM(duration), SUM(on_count) FROM tblsignals, tblsignal_events " +
"WHERE tblSignals.id = tblSignal_Events.id AND tblSignals.signal_ref IN (?) AND tblSignals.light IN (?) " +
"GROUP BY signal_ref, light" +
"HAVING SUM(duration) > ?";
StringBuffer sbSignals = new StringBuffer(50);
StringBuffer sbLamps = new StringBuffer(31);
// Build Strings for use in Prepared SQL statements
for(int i=0;i<signal_refs.length-1;i++) {
sbSignals.append("'" + signal_refs[i] + "'");
sbLamps.append("'" + lamps[i] + "'");
if (i <= signal_refs.length - 2) {
sbSignals.append(",");
sbLamps.append(",");
signals = new String(sbSignals);
lamp_colours = new String(sbLamps);
try {
// Establish connection with the database and return a Connection object
Connection con = ds.getConnection();
System.out.println("Connection made Successfully");
// Apply strings to statement
psqlStmt = con.prepareStatement(query);
psqlStmt.setString(1, signals);
psqlStmt.setString(2, lamp_colours);
psqlStmt.setInt(3, hours);
// Obtain data from DB
details = new Vector(4);
String[] results = new String[4];
rs = psqlStmt.executeQuery();
while(rs.next()) {
// Copy contents of the ResultSet into a String Array for each record
int i = 0;
results[i] = rs.getString(1); //Signal Reference
results[i++] = rs.getString(2); //Lamp (i.e colour)
double seconds = rs.getDouble(3); //Duration
seconds = seconds / (60*60); //Convert Seconds to Hours - would be nice to convert to Hours:mins:secs
results[i++] = String.valueOf(seconds);
results[i++] = String.valueOf(rs.getInt(4)); //Number of Times lamp has been switched on
// Append the string Array to a Vector
details.addElement(results);
if (psqlStmt != null) { psqlStmt.close(); }
if (con != null) { con.close(); }
} catch (Exception e) {
e.printStackTrace();
return details;
public void destroy() {
ds = null;
}Have since found this from the server log but I have no idea about how to solve this!
[#|2004-03-10T15:08:04.574+0000|INFO|j2ee-appserver1.4|javax.enterprise.system.tools.deployment|_ThreadID=13;|DPL5109: EJBC - START of EJBC for [RCE-WebService]|#]
Remote message: Processing beans ....
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RceWSInterface_Tie.java:32: '(' or '[' expected
super(new rcews.RCE-WebService_SerializerRegistry().getRegistry());
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RceWSInterface_Tie.java:32: ')' expected
super(new rcews.RCE-WebService_SerializerRegistry().getRegistry());
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:18: '{' expected
public class RCE-WebService_SerializerRegistry implements SerializerConstants {
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:33: <identifier> expected
registerSerializer(mapping,rcews.RceWSInterface_getLampDurations_RequestStruct.class, type, serializer);
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:33: '{' expected
registerSerializer(mapping,rcews.RceWSInterface_getLampDurations_RequestStruct.class, type, serializer);
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:65: illegal start of type
return registry;
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:65: <identifier> expected
return registry;
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:68: 'class' or 'interface' expected
private static void registerSerializer(TypeMapping mapping, Class javaType, QName xmlType,
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:74: 'class' or 'interface' expected
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:75: 'class' or 'interface' expected
^
10 errors -
Error while running SSIS package from Integration service or via Job
Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K
Maybe you are looking for
-
Can you give advise on my New Computer?
My company is upgrading our edit systems: This is basically what we are getting. This is pretty much the limit. Would you recommend any minor changes? Edit Software: Adobe CS6 Master Collection Two 3.06GHz 6-Core Intel Xeon (12 cores) 32GB (8x4GB)
-
IPhone will not retain photo's & Phone freezing
Since updating to 3.1, my iPhone has decided that it can't transfer 20Mb of Photos when I have 180Mb of free space left. Using Restore will make it so I can have my pictures on my phone again, but next time I sync my phone, I lose them again. I have
-
JDev 10.1.2 Bug Fix Release?
There were rumors that a bug fix release for JDev 10.1.2 is due by 2004 year end. Is this still a valid rumor?
-
Mistake in Forte WebEnterprise Designer
Hi : I have a "odd error" in my aplications, this error is ERRATIC. The error is the following : qqdb_ResourceException caught while executing EXECUTE tag named SUBMISSIONHandler.ProcessAction Original message: Execute failed for dynamic SQL statemen
-
[FIXED]Problems installing python-numeric, pycairo and pygtk
I'm getting these errors when installing these dependencides for gimp: [root@Darkstar ~]# pacman -Sf python-numeric Targets: python-numeric-24.2-1 Total Package Size: 0.6 MB Proceed with upgrade? [Y/n] checking package integrity... done. loading pack