Error while running OBIA configuration configApps.bat
I am receiving error while running configapps.bat.
I have the following wnvironment installed:
64 Bit windows
Java 6 (JDK1.6.x)
Weblogic server 10.3.6 in software only mode
Ran OBIEE 11.1.1.7.0 RCU utility to create BIPLATFORM and MDS schemas.
configured OBIEE 11.1.1.7
Installed ODI 11.1.1.7 with All components and “Skip Repository Configuration”
Ran OBI Apps RCU to create schemas for:
ODI Master and Work Repositories (DEV_BIA_ODIREPO)
Oracle Business Applications Components (DEV_BIACOMP)
Oracle Business Analytics Datwarehouse (DEV_DW)
Update to MDS schema.
Installed BI Apps 11.1.1.7.1
Applied FMW Platform Patches
Updated BIACOMP Schema with ATGLite patch scripts
Everything was up and running until now, when i try to configure OBIA via running configApps.bat, it is getting stuck at ODI configuration.
Also the server seems to be going to idle/suspended state every now and after 5-6 mins of startup and i see this message repeated again and again in server log :
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Has anyone encountered this issue and any idea how to resolve this.
Appreciate any help in advance ...
The re-install has been successful. Didnt encounter any issues in any configuration.
However the waring still appears
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Also in the log i am getting the following errors as well in the Weblogic server log
BEA -101020 Servelet failed with exception Java.lang.illegalstateexception: Cannot forward a response that is already committed
Oracle.as.management.mbeans.opmn OPMN.queryProcessStatus failed with the following exception oracle.as.management.opmn.optic.OpticBadConnectionException: Failed to create secure socket for OPMN
All patches were applied successfully, including weblogic one's.
Has anyone got any idea how to resolve these issues.
Thanks in advance.
Similar Messages
-
Memory error while running DI configuration wizard
Hi
We have installed NW 7.0 with DI usage. After Installation, we are running DI configuration Wizard. During step (at 48% ) Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers its giving error:
Exception Class:java.lang.OutOfMemoryError
Following is the screen shot of error:
Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
Description
No specified detailed description
State
START_ACTION
Support Information
Type of Action
InvokeServiceDebug Events
InvokeService:Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
Library: sap.com/tclmconfig~content
SourcePath ./DIStandaloneProcess/DICommonProcess/DIUserConfigProcess/DIAssignRolesToAddtlGroups/DIInvokeAssignRoleToXDevGroup
Time 2009/02/03 at 23:38:01
WSDL /content/common/service/usermanagement/assignRoleToGroup.wsdl
InvokeService- Result: Failed
Exception Message:null
Exception Class:java.lang.OutOfMemoryError
Stacktrace
Messages at cancel time
Messages at exception time
WebDynpro
<WebDynpro> <loggedInUser>J2EE_ADMIN</loggedInUser> <initial>true</initial> </WebDynpro>
Can anybody help me solving this problem
Thanks in advanceRead,
http://help.sap.com/saphelp_nw70/helpdata/en/43/54cdc48d395f6ce10000000a1553f6/frameset.htm
That should fix your problem
regards
Juan -
Error while running test configuration
Hi,
I created a test script using SAPGUI and test configuration.In test configuration,i created 2 variants other than default one.Downloaded the variants and executed it. It was giving error "Error inn ecatt command SAPGUI","Cannot Find Screen Element in Replay Mode". When i run test script alone,its working fine.
Please tell me how to correct the problem.
Thanks,
Aparna.Hello Aparna,
As per the error description give by you , it means that when you execute the script recorded the eCATT control is unable to find the screen element in the screen recorded , possible reasons may be that the control may be in some other screen and trying to find the screen element of the other screen in the present screen.
Solution to this may be check the connection id and the session id of the SAPGUI where the script is failing.
Ideally all the connection id and session id of all the SAPGUI's recorded has to be same so that execution takes place in a single session.
Hope it answers your question.
Thanks and Best regards,
Ajay -
Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm
Hi All,
I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
Failed to create the configuration database.
An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information: The given key was not present in the dictionary.
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
Any ideas why this is happening?Hello together,
I get the same error mentioned above while running the configuration wizard.
My Serverenvironment:
- MS Server 2008 R2 Enterprise
- Virtual Machine (Host Machine also R2 Enterprise)
- SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
- Prerequisites installed without error (and current versions)
Error information:
"Failed to create the configuration database"
"An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
The given key was not present in the dictionary"
The logfile has the following entry:
7/2009 10:52:48 9 ERR Task configdb has failed with an unknown exception
12/07/2009 10:52:48 9 ERR Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Any suggestions?
Thanks
Christoph -
Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
MadhuHi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure -
Error while running Remote Manager for OIM11gR2
Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions?Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions? -
Error while running ETL for Financials_Oracle R1213.
Hi All,
I have done all installation and configuration for OBIA 7.9.6.4. I am getting following error while running ETL for Financials_Oracle R1213.
===========================================================================================================
1)While starting DAC server, I am getting following error:
SEVERE: Incorrectly specified Post-Etl Script/Executable
================================================================================================================
2) After starting ETL Financials_Oracle R1213,
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1) pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable 2013-11-27 11:26:59.923 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has finished execution with Failed status.2013-11-27 11:26:28.855 Acquiring Resources 2013-11-27 11:26:28.857 Acquired Resources 2013-11-27 11:26:28.858 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL)MESSAGE:::Irrecoverable Errorpmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTableStatus Desc : FailedWorkFlowMessage : Error Message : Unknown reason for error code 36331ErrorCode : 36331EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1)
pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
2013-11-27 11:26:59.923 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has finished execution with Failed status.
====================================================================================================================
Could anyone please help me to resolve this error?
Regards,
NarottamDid you configured Informatica???
-
Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: javax.xml.bind.JAXBContext
Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
Loader: oc4j:10.1.3
Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28 at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil.. -
I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?
This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay. -
Error while running the financial report in the workspace.
Hi,
Im getting the below error while running the financial report in the workspace in HTML mode.
*"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
*"You are not authorized to use this functionality. Contact your administrator"*
Can someone let me know how to resolve this error.You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
http://workspaceServer:19000/hr/status.jsp
http://frWebAppServer:8200/hr/status.jsp
Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers. -
Error while running the autoconfig
Hi All,
Im getting below error while running the autoconfig on apps tier.could someone help me on below issue.
Application 11.5.10.2
DB :10.2.0.4.0
OS: HP UX
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 512
ERRORCODE = 512 ERRORCODE_END
Thanks
Edited by: user11977341 on Jun 8, 2011 3:06 AMDatabase & listner are up & running but when i run the autoconfig on form node im getting error
java.lang.Exception: Error while generating listener.ora.
at oracle.apps.ad.tools.configuration.NetServiceHandler.generate806Listener(NetServiceHandler.java:2503)
at oracle.apps.ad.tools.configuration.NetServiceHandler.processNode(NetServiceHandler.java:2272)
at oracle.apps.ad.tools.configuration.NetServiceHandler.main(NetServiceHandler.java:2978)
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 512
ERRORCODE = 512 ERRORCODE_END
.end std out.
Thanks -
Error while running BDB tcl testsuite commands
Hi,
I build berkeley db (4.7.25) libraries with tcl test suite is enabled in the solaris 9 machine using below configuration
../dist/configure --enable-dynamic ${BUILD_TAG} enable-tcl with-tcl=/export/tcl8.5/lib enable-test enable-java -prefix ${BUILD_DIR}
I used tcl 8.5, jdk1.6.0_18 and gcc-3.4.6 for building libraries.Libraries are build successfully.
When I run tcl command "run_std" in the tcl prompt, test is completed with below error logs in ALL.OUT file.
==========================================================================
cat ALL.OUT | grep FAIL
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:14:53:06 (00:00:01) number of other locks on 5: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:14:53:06 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:14:53:06 (00:00:01) number of other locks on 5: expected 0, got 1: pid 28332: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:18:24:50 (00:00:00) number of other locks on 44: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:18:24:50 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:18:24:50 (00:00:00) number of other locks on 44: expected 0, got 1: pid 28378: expected 0, got 1
FAIL:03:09:45 (00:00:42) db_dump/db_load(./TESTDIR/primary007.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/primary007.db failed.
FAIL:03:09:45 (00:00:00) db_dump/db_load(./TESTDIR/secondary007.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/secondary007.0.db failed.
FAIL:03:09:45 (00:00:00) db_dump/db_load(./TESTDIR/secondary007.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/secondary007.1.db failed.
FAIL:03:10:31 (00:00:46) db_dump/db_load(./TESTDIR/primary008.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/primary008.db failed.
FAIL:03:10:31 (00:00:00) db_dump/db_load(./TESTDIR/secondary008.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/secondary008.0.db failed.
FAIL:03:10:31 (00:00:00) db_dump/db_load(./TESTDIR/secondary008.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/secondary008.1.db failed.
FAIL:03:12:06 (00:01:35) db_dump/db_load(./TESTDIR/primary001.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/primary001.db failed.
FAIL:03:12:06 (00:00:00) db_dump/db_load(./TESTDIR/secondary001.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/secondary001.0.db failed.
FAIL:03:12:06 (00:00:00) db_dump/db_load(./TESTDIR/secondary001.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/secondary001.1.db failed.
FAIL:03:12:34 (00:00:28) db_dump/db_load(./TESTDIR/primary002.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/primary002.db failed.
FAIL:03:12:34 (00:00:00) db_dump/db_load(./TESTDIR/secondary002.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/secondary002.0.db failed.
FAIL:03:12:34 (00:00:00) db_dump/db_load(./TESTDIR/secondary002.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/secondary002.1.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/primary006.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/primary006.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/secondary006.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/secondary006.1.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/secondary006.2.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/secondary006.2.db failed.
FAIL:03:13:10 (00:00:23) r: sindex: db open:too many open files
FAIL:06:38:47 (02:19:40) rep_process_message returned DB_NOTFOUND: No matching key/data pair found
====================================================================================
What could be the reason for the above errors while running the tcl testsuite ?
Is there any problem in berkeley db libraries that are build with above configuration?
Could you please clarify.
Thanks in advance.
Regards,
MadhuHi Sandra,
I have executed lock003 in the tclsh prompt and error occurred while executing this lock test.
========================================================
[exec] Lock003: Multi-process random lock test
[exec] Lock003.a: Create environment
[exec] Script watcher process 11571 launching lockscript.tcl process 11574.
[exec] Script watcher process 11570 launching lockscript.tcl process 11573.
[exec] Script watcher process 11572 launching lockscript.tcl process 11575.
[exec] Script watcher process 11576 launching lockscript.tcl process 11578.
[exec] Lock003.b: 5 independent processes now running
[exec] Script watcher process 11577 launching lockscript.tcl process 11597.
[exec] 06:35:39 (00:00:00) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:36:15 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:36:51 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:37:27 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:38:03 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:38:38 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:39:12 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:39:48 (00:00:36) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:40:22 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:40:57 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:41:32 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:42:07 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:42:41 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:48:46 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:49:20 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:49:55 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:50:29 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:51:04 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:51:39 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:52:13 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:52:48 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:53:23 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:53:58 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:54:32 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:55:07 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:55:41 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:56:16 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:56:51 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:57:25 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:58:00 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:58:34 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:59:09 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:59:46 (00:00:37) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:00:21 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:00:56 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:01:30 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:02:05 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:02:39 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:03:14 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] All processes have exited.
[exec] FAIL: error message in .out file: ./TESTDIR/lock003.0.out:FAIL:06:38:00 (00:00:00) number of other locks on 52: expected 0, got 1
[exec] FAIL: error message in .out file: ./TESTDIR/lock003.0.out:FAIL:06:38:00 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:06:38:00 (00:00:00) number of other locks on 52: expected 0, got 1: pid 11573: expected 0, got 1
===================================================================
Is this problem occur if berkeley db jars having any issues ?Why because, when berkeleydb jars (build without tcl test flags in the same environment) are used in application under high load,application is hanged because of berkeley db native api.
Sorry,I could not change ulimit value in my system because of lack of permissions.
Can you please explain what could be the reason for the above error and how to rectify it.
Thanks
Madhu -
Error while running SSIS package from Integration service or via Job
Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K -
Getting error while running baseline_update.sh
Hi, getting the below error while running baseline_update script:
[10.22.13 16:57:17] INFO: Pushing authoring content to dgraph: AuthoringDgraph
[10.22.13 16:57:17] SEVERE: Service Unavailable (503):
Occurred while executing line 5 of valid BeanShell script:
2|
3| compId = invokingObject.getElementId();
4| log.info("Publishing Workbench 'authoring' configuration to MDEX '" + compId + "'");
5| IFCR.pushAuthoringContentToDgraphById(compId);
6|
7|
[10.22.13 16:57:17] WARNING: Caught an exception while executing post-startup script for server component 'AuthoringDgraph'.
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.utility.IFCRUtility$HttpStatusException
com.endeca.soleng.eac.toolkit.utility.IFCRUtility execute - Service Unavailable (503):
[10.22.13 16:57:17] INFO: [AuthoringMDEXHost] Starting shell utility 'rmdir_dgraph-input-old'.
[10.22.13 16:57:18] INFO: [LiveMDEXHostA] Starting shell utility 'cleanDir_local-dgraph-input'.
[10.22.13 16:57:18] SEVERE: Error communicating with EAC agent while starting utility 'cleanDir_local-dgraph-input'.
Occurred while executing line 7 of valid BeanShell script:
4| AuthoringDgraphCluster.copyIndexToDgraphServers();
5| AuthoringDgraphCluster.applyIndex();
6|
7| LiveDgraphCluster.cleanDirs();
8| LiveDgraphCluster.copyIndexToDgraphServers();
9| LiveDgraphCluster.applyIndex();
10|
[10.22.13 16:57:18] SEVERE: Error executing valid BeanShell script.
Occurred while executing line 29 of valid BeanShell script:
26| Dgidx.run();
27|
28| // distributed index, update Dgraphs
29| DistributeIndexAndApply.run();
30|
31| // Upload the generated dimension values to Workbench
32| WorkbenchManager.cleanDirs();
[10.22.13 16:57:18] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
com.endeca.soleng.eac.toolkit.utility.Utility start - Error communicating with EAC agent while starting utility 'cleanDir_local-dgraph-input'.
Caused by com.endeca.eac.client.EACFault
sun.reflect.NativeConstructorAccessorImpl newInstance0 - null
Please help??Hi TimK,
File is empty.Nothing is there.I am using windows8 .
Please help . -
Getting error while running Perl adcfgclone.pl appsTier
hi ,
i m getting error while running Perl adcfgclone.pl appsTier
error:ksh: Perl: not found
i check for per and ksh
which perl
/usr/bin/perl
which ksh
/usr/bin/ksh
(my os out put for perl ,my os is SunOS testserver 5.10 Generic_137137-09 sun4u sparc SUNW,Ultra-250)
perl -V
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/5.00503
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/site_perl/5.005
/appl2/applmgr2/prodappl/au/11.5.0/perl
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
which i need to set in path
PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin (like this )
export PATH
please help me outhi ,
here is the out put
# pwd
/appl2/applmgr2/prodora/iAS/Apache/perl
# perl -V
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=solaris, osvers=2.10, archname=sun4-solaris-64int
uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO',
optimize='-xO3 -xspace -xildoff',
cppflags=''
ccversion='Sun WorkShop', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE'
cccdlflags='-KPIC', lddlflags='-G'
Characteristics of this binary (from libperl):
Compile-time options: USE_64_BIT_INT USE_LARGE_FILES
Locally applied patches:
22667 The optree builder was looping when constructing the ops ...
22715 Upgrade to FileCache 1.04
22733 Missing copyright in the README.
22746 fix a coredump caused by rv2gv not fully converting a PV ...
22755 Fix 29149 - another UTF8 cache bug hit by substr.
22774 [perl #28938] split could leave an array without ...
22775 [perl #29127] scalar delete of empty slice returned garbage
22776 [perl #28986] perl -e "open m" crashes Perl
22777 add test for change #22776 ("open m" crashes Perl)
22778 add test for change #22746 ([perl #29102] Crash on assign ...
22781 [perl #29340] Bizarre copy of ARRAY make sure a pad op's ...
22796 [perl #29346] Double warning for int(undef) and abs(undef) ...
22818 BOM-marked and (BOMless) UTF-16 scripts not working
22823 [perl #29581] glob() misses a lot of matches
22827 Smoke [5.9.2] 22818 FAIL(F) MSWin32 WinXP/.Net SP1 (x86/1 cpu)
22830 [perl #29637] Thread creation time is hypersensitive
22831 improve hashing algorithm for ptr tables in perl_clone: ...
22839 [perl #29790] Optimization busted: '@a = "b", sort @a' ...
22850 [PATCH] 'perl -v' fails if local_patches contains code snippets
22852 TEST needs to ignore SCM files
22886 Pod::Find should ignore SCM files and dirs
22888 Remove redundant %SIG assignments from FileCache
23006 [perl #30509] use encoding and "eq" cause memory leak
23074 Segfault using HTML::Entities
23106 Numeric comparison operators mustn't compare addresses of ...
23320 [perl #30066] Memory leak in nested shared data structures ...
23321 [perl #31459] Bug in read()
27722 perlio.c breaks on Solaris/gcc when > 256 FDs are available
SPRINTF0 - fixes for sprintf formatting issues - CVE-2005-3962
6663288 Upgrade to CGI.pm 3.33
REGEXP0 - fix for UTF-8 recoding in regexps - CVE-2007-5116
Built under solaris
Compiled at Jul 31 2008 12:07:52
@INC:
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
Thanks &Regard
Maybe you are looking for
-
How do you import multiple iMovie projects into one iDVD project?
Hi. I'm 17, and am trying to create a DVD of when the family went on a cruise. For different places/days, I've created different iMovie projects. But, when I want to export to iDVD, it only lets me put one iMovie project into one iDVD project? I've t
-
File opening multiple times in a book
Hello. Something has gone crazy in indesign for me. Not sure if its the recent update. In osx if you open a book and double clikc one of the files, it opens, if you double click it again, it opens another copy, changes made in one reflect in the othe
-
ORA-01403: no data found ORA-06512: in SYSMAN.MGMT_CREDENTIAL
Hi all, I'm trying to configure grid agent 10.2.0.5 on Windows server 2008 (x64). One step is to configure host credentials in GRID enterprise manager. When I put those credentials (user and password) I recive the following error: ORA-01403: no data
-
I downloaded the new mavericks operating system on my macbook pro and I can't find out how much space I have left. Before the installation of mavericks, storage space left was displayed at the bottom of the Finder window.
-
Hello Friends, Could anybody explain me the procedure of AUC acquisition through Internal Order and settlement of this IO to AUC and AUC to main Asset? Let me know the step wise details start from creation of IO to settlement to main Asset Thanks to