Error while running TDS Certificate in background process
Hii,
When we are running TDS Certificate using Tx J1INCERT in back ground process.
we are getting following error message.
Date Time Message text
25.06.2010 13:15:15 Job started
25.06.2010 13:15:15 Step 001 started (program J_1IEWT_CERT, variant &0000000000011, user ID MPD
25.06.2010 13:25:43 No data selected for printing
25.06.2010 13:25:43 Job cancelled after system exception ERROR_MESSAGE.
kindly help me regarding this.
Regards,
Venkat.
HI Venkat,
do you also get the error if you run J1INCERT online or only when in background?
What is the number of the error message?
BR, Tomislav
Similar Messages
-
Error while running TDS in background
Hii,
When our FI consultant is running TDS Certificate using Tx J1INCERT in back ground process.
we are getting following error message.
Date Time Message text
25.06.2010 13:15:15 Job started
25.06.2010 13:15:15 Step 001 started (program J_1IEWT_CERT, variant &0000000000011, user ID MPD
25.06.2010 13:25:43 No data selected for printing
25.06.2010 13:25:43 Job cancelled after system exception ERROR_MESSAGE.
kindly help me regarding this.
Regards,
Venkat.I don't know what this is, but most likely not related to ABAP development. Please post in the correct functional forum.
Also analyse the message "No data selected for printing".
Thread locked.
Thomas -
Error while running a job in background
Hi,
I got the following error message while running the job in background.
"Step 001 started .
Control Framework: Fatal error - GUI cannot be reached.
ABAP/4 processor: RAISE_EXCEPTION
Job cancelled"
What is the reason for this error and how to correct it?ALV Grid control is based on the custom controls on the screen. When the program is scheduled in background, it tries to create GUI related front-end objects and hence the error u201CFatal Error u2013 GUI cannot be reachedu201D. This type of problem is common with all the programs that use the ALV grid control to display the output.
Solution:
Whenever we execute this type of programs in background, we should be passing a blank docking container instead of the custom container as parent to our grid control.
The docking container doesnu2019t need any of the custom controls on the screen; instead it attaches an area to any or all of the four edges of the screen (top, left, right or bottom). The behavior of the areas in the container is determined by the sequence in which they are initialized. Docking Containers are attached to the screen from the inside out. This means that when you create a second container, it is attached to the edge of the screen, and the container that was already there is pushed outwards.
Let us modify the standard program (by taking a copy of it) to enable it to execute it in background.
Following modifications have to be made:
· Define a docking container in the program
data: or_doc type ref to cl_gui_docking_container .
· At the time of creating a custom container, check if the program is being executed in background or foreground. If the program is scheduled in background, then create a docking container instead of custom container.
if cl_gui_alv_grid=>offline( ) is initial.
create object or_custom_container
exporting container_name = c_container.
create object or_grid
exporting i_parent = or_custom_container.
else .
create object or_grid
exporting i_parent = or_doc .
endif .
Now test executing the program in background. The report would be generated. -
Error while running a OA framework Page Process exited with exit code 1.
Hi all,
I downloaded the Patch 4573517 from Metalink for JDEV with OA extension release 11i.I followed all the instruction of the setup init and installed the Jdev,also mytutorial pages got compiled successfully,but when i trie dto run the page
Run > Run test_fwktutorial.jsp from the main menu.
it gives me error.The error is as follows
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\D drive\OA_2008\jdevbin\jdk\bin\javaw.exe -client -classpath C:\D drive\OA_2008\jdevbin\j2ee\home\oc4j.jar;C:\D drive\OA_2008\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\D drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Doracle.j2ee.dont.use.memory.archive=false -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config C:\D drive\OA_2008\jdevhome\jdev\system9.0.3.5.1437\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
java.lang.NoClassDefFoundError: drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14/jar;C:\D
Exception in thread "main"
Process exited with exit code 1.
I am not understanding why it is going in exception.One reason which i doubthere is the line
java.lang.NoClassDefFoundError: drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14/jar;C:\D
here in this line the last word is ojdbc14/jar,i think it should have been ojdbc14.jar.
Can any body please help me out on how to correct this problem.Thanks
ManishManish,
You should ask on the OA Framework Forum.
john -
Hi All,
I have a report which if i run in background is giving me dump.I am getting tsv_tnew_blocks_no_roll_memory error.I checked in debugging and am pasting the code
where it is failing
Fetching delivery history
SELECT ebeln ebelp zekkn vgabe
gjahr belnr buzei bwart
budat menge xblnr lfbnr
FROM ekbe
INTO TABLE t_ekbe
FOR ALL ENTRIES IN t_eket
WHERE ebeln = t_eket-ebeln
AND ebelp = t_eket-ebelp
AND bwart IN r_bwart.
In the internal table t_eket there are 2400000 records.
Also there are many other hufe internal tables in the run time in program.
I think this error is bacause of memory allocation or lack of it.
So any solutions are most welcome.
I have tried using free itab.
Am verifying it now.
Please suggest.
Thanks in advance,
Saket.Is there a way to filter more data in T_EKET.
2400000 in For all entries is too much for a select query.
Regards,
Mohaiyuddin -
Error while printing TDS certificates for Vendor
Hi,
In 'J1INCERT' transaction iam getting an error message "Please maintain entries in Layout customizing".
I have maintained entries for 'J_1IEWT_CERT' From. Is there somethig else i need to do?
Please advise.
Thanks in Advance,
Safihai,
Check whether you have entries in j_1iewt_cert_n.If not maintain the same and the issue will be resolved.
Raghav -
Error while running background deployment, program /SAPAPO/RMSDPDEP
Hi all,
For the second time in 3 months, I encounter this strange error while running a daily background deployment job, using program /SAPAPO/RMSDPDEP.
The job starts correctly and does a part of its job, but then interrupt with this message in the job log :
--> "no valid simulation guid" (class SAPAPO/OM_TS, n° 101)
--> "Unknown error" (class SAPAPO/OM, n° 100)
--> "Job cancelled after system exception ERROR_MESSAGE" (class 00, n° 564)
I just can't find any clue about what causes the problem...
Did anyone encounter that kind of difficulties before ? Any help would be usefull...
Thanks !
FabriceHi Siva,
In this range of time, I effectively run 13 parallel deployment jobs, as follow :
n° 1, 2, 3, 4 and 5 : same location (factory 1) and each treats a products selection
n° 6, 7, 8, 9 and 10 : same location (factory 2) and each treats a products selection
n° 11 : all products of factory 3
n° 12 : all products of factory 4
n° 13 : all products of factory 5
A product can only be produced in a single location, so there might not have access concurencies during parallel jobs. Do you think it could be some kind of a technical problem (not enough process available ?). Note that the problem can't come from CPU, we use CPU auto-allocation, and it works well.
What do you think ?
Thanks
Fabrice -
Error while running the process chain
Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amithi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM -
Error while running Process Chain
Hello all,
I am getting following error while running the process chain.
"Process Activate ODS Object Data, variant PROCESS PSA_TO_ODS_ZFIGL_O1 has status Canceled (instance )".
Due to this others are get affected..
Plz provide solution.
amitHello all,
I am getting following error while running the process chain.
"Process Construct Database Statistics, variant DB_STAT_0PY_C02 has status Canceled (instance) ".
Due to this others are get affected..
Plz provide solution.
amit -
RFC ERROR while running BI Process Chain
I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
ThanksThis looks like a BW problem. Do you get the same message when you submit it manually in SAP?
-
GETWA_NOT_ASSIGNED error while running abap prog in process chain
Hi.
I am getting a runtime error GETWA_NOT_ASSIGNED while running an ABAP program in process chain.
But when i execute pro in SE38 , it's not giving any error.
Please any one can suggets what will be error.Hi,
i also used to get error for a program executed through process chain but when it is executed in se38 it used to work... that is because my program try to access a application server folder and reads the file from there... the authorisation to this is not proper through process chain ..... once authorisation to the folder was given properly .. i am able to run...
Such things can happen in your case also... Try to analyse the dump in st22.... what happened ...
Regards
vamsi -
"Failed to load excel file" an Error Message while running TDS upgrade util
Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon -
Error while running a customize report in oracle ebs
Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein -
Error while running a test case in Jcaps 6 JDBC project
I encountered an error while running the testcase for a JDBC BC project in Jcaps 6.
BPCOR-6135:A fault was not handled in the process scope; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null. Sending errors for the pending requests in the process scope before terminating the process instance
Caused by: I18N: BPCOR-3023: Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/DBSample/Db}Db
Kindly suggest a solutionIt seems to be a very common error. Try checking your map assignments when the source (from) is empty (null). These mappings with null values may produce the error you are facing...
Good luck! -
Error while running custom BI report in R12.1.1
Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
PraveenHi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred.
Maybe you are looking for
-
How do I get my Mac air to recognise my HP c4580 printer?
I am trying to print an article (stored with Pages) using an HP photosmart printer C4580 but it says it is searching for the printer (which is connected by USB to the Mac Air) but cannot find it. Also I can't seem to find Bonjour (which I have always
-
Will pay paypal if you can help me.
I have a LiveBox 1.2 and a WRT160N. Here's how I'm set up. My PC and my WRT160N are connected through Ethernet Cable. My LiveBox 1.2 is connected to my WRT160N via Ethernet Cable (The blue one which came with it) If I connect like this I can't access
-
Connection Office365 Exchange - Outlook 2010/2013 (Desktop)
I have an Office365 account with Exchange function, connected with my personal domain. This works perfect for almost a year now, but since a few days, Outlook (desktop) can't connect to my ExchangeMail/Office365 anymore. Some details: I can reach my
-
"Spam vs. Junk" in Mavericks Mail
Up until upgrading to OS X Mavericks - in my Mail application, 2 separate folders "Junk" and "Spam" appeared, and different e-mails automatically fell into each -- my "Spam" folder disappeared upon upgrade to Mavericks...where'd it go? Do I now have
-
Hi, Does anyone know how to pass parameters to awrrpt.sql? I want to cron or use dbms_scheduler to generate this report. However when I issue the script with trailing parameters it ignores them. I am hoping it has something equivalent to a .par file