Error while saving a Sales Order in the CRM Mobile Application

Hi,
I am facing issues while saving a Sales Order in the CRM Mobile Application. I am getting the error message "Value Field KvLangu is not valid (Error: 236 / 1102)".
I would be very grateful if somebody had faced this issue before and this way could help me with some information.
Best Regards,
Rogerio Prado.

Hi Rogerio,
You should put mobile sales related messages in the forum "CRM Mobile applications"
This error message is coming because the language table SMOT002 might be empty in your mobile client OR it does not have all the values which have been customized in the system.
You need to have subscription based on publication "customizing objects" assigned to your site.
Regards
Vivek

Similar Messages

  • RunTime Error while saving a Sales Order

    Hi All,
    When i am saving a Sales Order, the system is throwing a Runtime Error.
    The ABAP Code in the Runtime Error screen as follows.
              select * from (t681-kotab) appending table <cond_tab>
                     up to 1 rows
                     where kappl  = se_kappl
                     and   kschl  = se_kschl
                     and   datbi >= se_date
                     and   datab <= se_date
                     and   (coding_tab).
    Till these days, there was no such error while saving a Sales Order.
    How to resolve this issue?
    Regards
    Pavan

    Hi,
    The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
    select * from (t681-kotab) appending table <cond_tab>
    up to 1 rows
    where kappl = se_kappl
    and kschl = se_kschl
    and datbi >= se_date
    and datab <= se_date
    and (coding_tab).
    The reason could be is someone has screwed up the entries in T681 table. Check that out.
    Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
    Let me know if you are still stuck up.
    If you can send me the ST22 dump of the run time error, i might be able to help you more  on this.
    Hope this helps.
    Thanks,
    Balaji

  • Error while Saving Service Sales order.

    Hi..
    Please help me for resolving below error..
    While saving service sales order error is coming as-
    Invalid account assignment category...
    Detailed Error-
    "Assign components to a/c assignment category & Account Assigmnet Category not defined.
    In customisining a/c assgnment cate for ser & mainta order .In standard define the following values for the order category 30.A/c Asd type general F,
    A/c *** type Project Q,A/c assigment type Sales Order E,Sales Doc Project D".
    Awaiting for your inputs....
    Thanks
    Manoj Mahajan

    Hi Manoj,
    Account Key assigned to the pricing condition hasn't been configured completely.
    Please check the appropriate account key and speak to your FI team.
    Pl award me points if it is helpful.
    Let me know if you need more details.
    Thanks,
    Ramesh

  • Run time error while saving a sales order

    After CIn configuration when i raise the sales order i cannot save it. when i click on the save icon the following runtime error message x302 (v3) with the short dump.. pls guide..
    thanks...

    Hi sanjitdutta,
    Please get in touch with your ABAP team to know wat exactly is teh cause for the short dump. Please post the error description completely.
    Thanks
    Arun
    Edited by: arun subramani on May 16, 2011 7:06 AM

  • Giving error while creating a sales contact for the previous year (2008)

    Hi Friends,
    We are currently with SP12. When we try to create a sales contract for the previous year it is giving error like "Schedule line is for the item 100 cannot be after the order's latest delivery date".
    i tried debugging and found that that there is a rule created for this (in SP12). I commented the rule and tried to create a contract but, again got an error "Error while saving". This error I can't catch while debugging.
    I even didn't find where the schedule line date and header cancel dates are set so that I can change the dates manually.
    If any one has any idea, kindly help me.
    Best regards,
    Swarna Seeta

    Hi Wolfhard,
    Thanks for the reply.
    You are right and I have uncommented the line which assigns true to the return value and the contract got saved now.
    Thank you so much.
    I just want to know whether commeting this rule effects any of the functionalities of the sales contract.
    Best regards,
    Swarna Seeta

  • Error while posting a sales order created with reference from contract for

    Hi,
    I am posting a sales document( Type: WA)  created with reference from contract document(  type wk2) for delivery.  The item category in the sales order of the Item is WAN. On posting this document for delivery I am getting the error as "Item category WAN is not defined".  Please help me out how to resolve this issue.
    Thanks
    Jayant

    Hi Jayant,
    I think its value contract releated error,
    You suppose to check material item category group through T.code-MM02 into sales2 tab and maintain VCIT,
    and do item category assignment through T.code- VOV4.
    plz.maintain like that,
    WK2 -          -VCIT-         -           - WAN(contract item category),
    wk2  -          -        -VCTR-          - WAN((contract item category),
    you should also maintain same against your standard Sales Document type and for Standard Item category into VOV4,
    WA(standard docu.type) -VCIT-                             -                -TAN(your standard docu.type item category),
    WA(standard docu.type) -         -VCTR(item usage)-              -TAN(your standard docu.type item category),

  • Interesting scenario- user facing error while deleting a sales order

    Hello All,
    I have one interesting scenario and want feedback from your side as soon as possible
    Scenario-
    One of my clients is facing a problem while deleting a sales order.
    the sales order he is trying to delete is the old order created in 2007.
    when i see the document flow the user has created the export order, then delivered it, invoiced and sent it to accounting, accounting document is also cleared. then he cancelled the invoice, reverse PGI and deleted the delivery. the status of the sales order system is showing is being processed. but please note in this case after reversing PGI and deleting a delivery the delivery document disappears from the document flow.
    document flow looks like this
    Order - 200004715                     Being processed
    invoice- 700005310                    completed
    accounting 700005311                 cleared
    Cancel Invoice 700005315            completed
    Accounting 700005316                 cleared
    Now, in 2008 user is trying to delete the sales order but he is unable to do the same. system is giving him message "unable to delete sales order because of subsequent document 70005310 (which is invoice number)"
    Can somebody please throw some light on this problem.
    Thanks in advance.

    Hi,
    As fas as I know, this is standard system behaviour. The reason - you have done PGI (which has created a material document as well as accounting doc) and invoiced & reversed (which again has created accounting documents & rversal documents). All these documents are referencing the sales order.
    If you delete sales order, sales order number gets deleted from VBAK /VBAP tables.
    Hence, in relational data base scenario (meanin SAP in this context), deletion of sales order after creation of subsequent documents is not feasible.
    Hope it clarifies the issue.
    Regards
    Murali

  • Error message while saving a sales order "Product 10069995 does not have sc

    hi Friends,
    i am creating an order , enter the material,quantity, batch , correct price everything etc etc. while saving the order it gives an error message "Product 10069995 does not have schedules assigned"

    Hi Suman
    Use transaction code OMJJ and check the "Allowed Transactions" for customizing movement types.
    Kalpesh

  • Error while creating standard sales order

    Hi
    While creating a standard sales order , I am getting a problem  in the incompleteness log asking for the internal sales order no. in the 'accounting' tab of my order. It is related to cost assignment and profitability segment no.I am not able to to find the order no. for dat.
    What settings should i make in spro so that this incompletion  does not comes again while saving the order ? Shud i make changes at the item category level or  the sales document type level or at the material master data ???

    Hi Gurulos,
                       Go to transaction "KO01" and create an Internal order by taking a reference order .If you know your controlling area just press "F4" at the Reference order tab and you will find the reference orders. Take one of them and create a new one and assign the same to your order. Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • Product allocation error while creating a sales order

    Hi Gurus,
    My client is using the availability check against  product allocation functionality in sales order.while I am creating the sales order and entering the material system is throwing the error message product allocation XXX is invalid,after pressing the enter button system has thrown another error "incorrect index structure for table XMVERF_POS/000010" and unable to save the order.
    I have checked the material master and the product allocation is assigned in basic data 1 view,I have also checked the IMG settings it has maintained and assigned to infostructure.Please let me know is there any config settings are missing related to product allocation.
    Regards,
    hari challa.

    Please check if storage location is populated for the material. Also may be this material is a non-stock material and not relevant for storage location check.. If you have any non-stock items in your order and if you are populating the storage location in the order automatically, then this happens. Please check your code and bypass the check for non stock items.
    Hope this helps
    Regards
    Sai

  • Run time error while creating a sales order by va01

    hi ,
         while  i am creating a sales order a runtime error occurs as i fill entry for sole to party and then material and quantity and as i press enter. the run time error is:
    error in current abap program "saplv61z"  had to be terminated because it has come across the statement that unfortunately can not be executed.
    kindly solve my problem.
    thanks.

    Hi Agrawal
    As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
    close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
    Regards
    Srinath

  • Error while creating a Sales Order

    Hi ,
    I have created a material master for a material Y-350 in my system.I have defined it for the Plant 1100 (Berlin), Sales Org 1020 , Distribution channel 22.When i try to create a sales order for a customer in Dusseldorf,Germanyy , i get an error saying "Material Y-350 is not defined for sales org 1020,distr.chann 22,language DE".It means that a short text with the appropriate language exists(a short text must be available in the language of either the customer or the sales organization).I had it maintained in English.From where do i go and maintain it in German ?Kindly let me know.Thanks.

    Hi,
    First check what's the sales area assigned to your customer in Dusseldorf,Germany. It has to be Sales Org 1020 , Distribution channel 22.
    To check that go to XD02 & enter customer number there and press "Customer Sales Areas" button. There you can view all sales areas available for your customer. Check whether Sales Org 1020 , Distribution channel 22. exists there. If not, from XD01, you have to extend your customer for that sales area again.
    If that's there, then check the language in Material Master.
    What you have to do is, go to MM02, give the Material number and go in by selecting Basic Data view.
    Once go in, select "Additional Data" button option from the top.
    Under "Descriptions" tab, maintain language "DE", since customer is from Germany.
    Now try & see.
    Best regards,
    Anupa

  • Error while raising a sales order.

    I am doing intecompany billing and has assigned internal customer of original company code to the delivering plant. the stocks are also maintained correctly in the delivering plant and linked to the original plant. But when I am creating a new sales order the error showing is:"ship to party zaaa is not defined for sales area znnn zn zo". Please note Zaaa is the customer for Znnn/Zn/Zo
    Thanks
    Adi

    HI aditya
        You have to create the internal  customer to the sales.org. from which goods are going to be delievered ( delevering plant)
    2)You will be assigning this internal customer to the sales.org. for which the customer is placing an order.(By doing so intercompany billing document is possible.
          you try like this, you will not get the error.
         reward points if helpful.
         Regards
        Prasad.G

  • Error while creating a sales order BAPI_SALESORDER_CREATEFROMDAT2

    Hi All,
    I am using the BAPI BAPI_SALESORDER_CREATEFROMDAT2 to create a sales order.
    I am passing all the required fields and also the rejection code at the item level.
    Also I am using a variant configuration material and hence ai am filling the VC config tables.
    When I execute this BAPI it is giving me the error 'Item 000010's configuration can no longer be changed' although configuration is maintained for this material.
    When I try the same case with no rejection code and with VC configuration, the sales order is created.
    When I try the same case again with rejection code and NO VC configuration, the sales order is created.
    When I maintain both the rejection code and VC configuration I am getting the error.
    Does anyone have any idea what is causing this error or I am supposed to populate any flag in ORDER_ITEMS_INX to get this correctly.
    Any answers will be greatly apppreciated!
    Thanks
    Sandeep

    Sandeep,
    There are a few SAP Notes that you should investigate, some of which you may have already seen.  First, I'd suggest you look at [Note 481102|https://service.sap.com/sap/support/notes/481102] and its three related Notes: [774346|https://service.sap.com/sap/support/notes/774346], [550431|https://service.sap.com/sap/support/notes/550431], [366265|https://service.sap.com/sap/support/notes/366265].
    If these Notes do not help then check if [Note 1099414|https://service.sap.com/sap/support/notes/1099414] has been applied in your system.  If it has been applied, then [Note 1116144|https://service.sap.com/sap/support/notes/1116144] might solve your issue.  If neither of these two notes are applied, then it could be that they both need to be applied.  However, if both notes are already applied, then you may want to consider opening a customer message with SAP.  Since these two SAP Notes are relatively new, it makes me think that you might have discovered a related error that has not been reported to SAP yet.
    Best Regards,
    Jamie

  • Error while Creating a Sales Order for a Configurable Material

    Dear Members,
                            When I am creating a Sales Order for a Material. After Entering the Sold to Party and Material(Variant Configuration) I am getting an error in popup that Derivatiion Rule not defined for the Country IN. Please can you help me out regarding the settings for this.
    Thanks,
    Farhan.

    It seems your issue relates to some non assignment in COPA settings.  Hence,  check this help link and I hope this will be helpful to you
    [Source and Target Fields |http://help.sap.com/saphelp_erp2004/helpdata/en/59/65a2b8dd1711d2a6110060087a7a87/frameset.htm]
    thanks
    G. Lakshmipathi

Maybe you are looking for