Error while saving Long Texts

Hello
We are using SRM7 Extended classic scenario.
We don't use shopping carts, rather create POs directly in SRM which will be transferred to ECC as per the standard.
Error:
I am getting an error "Error while saving Long Texts" during my PO creation. I get this message in a small pop-up screen. As soon as i click ok or close the pop up screen it kicks me out of the PO creation screen back into the main SRM screen.
When:
During the PO Creation
Any specific situation:
Yes, only for Material POs
This is happening when I am creating the PO with a Material code. I can create free text PO without any issues.
This is a standard message and the message number is 022.
Thaks for the help guys.

Hi,
To confirm can you check commeting "getOADBTransaction().commit();" gives any error message?
If yes then you can try the following option:
Have you checked whether the "/" is changed to "\" in the dbc file?
In the following two entries the slash has to be made as shown below:
APPS_JDBC_URL=jdbc\:oracle\:thin\:@(DESCRIPTION\=(ADDRESS_LIST\=(LOAD_BALANCE\=YES)(FAILOVER\=YES)(ADDRESS\=(PROTOCOL\=tcp)(HOST\=10.100.503.6)(PORT\=1521)))(CONNECT_DATA\=(SERVICE_NAME\=VIS)))
JDBC\:processEscapes=true
Thanks and Regards,
Lacman

Similar Messages

Issue while saving long text through MS Word Editor in SAP

Hi All,
I am facing some issue while saving text through Word editor in SAP(like Notes in Installation or Long Text in device location).
After entering the text, when I am pressing the Back button, it says text transferred successfully, but when I try to see the text again, its not in the proper format.
Every time I go to the word editor, some text is deleted.
Thanks in advance for your help.
Manoj Vatwani

Hi Manoj,
Can you share some screenshot for the formatting issue that you are facing.
Thanks,
Amlan

Error While uploading Long Text for Operations in IA05 Transaction.

Dear Team,
Good Day.
While we are trying to upload the Long Text through BDC for IA05 operations the text is updating in Database but it is not visible in the long Text field. Is it possible to upload the long text through BDC or any bapi's which can be used for the same. Any configuration needed for this please do the needful.
Regards,
Bhanu.

Hi Bhanu
correct me if im wrong, the long text is a multiline text, its an object for text, this cant be filled with BDC since this object can not be created in background mode, so i think the bdc skip the routines to fill this object, you can use the save_text function right after the transaction ends
Regards
MC

Error while uploading Long Text in IA05 through BDC.

Dear Team,
Good Day.
While we are trying to upload the Long Text through BDC for IA05 operations the text is updating in Database but it is not visible in the long Text field. Is it possible to upload the long text through BDC or any bapi's which can be used for the same. Any configuration needed for this please do the needful.
Regards,
Bhanu.

Bhanu,
I've modified the previous message with a correction that, I had used this for uploading Activity lines Longtexts.
One more thing: After I faced some problem, I used split text in the code. i.e., Splitting the longtext into several lines (72 char each). Show these code lines to your ABAPer, may be he might be able to draw some clues.
In the BDC lines alongwith other fields the gold line below
PERFORM FILL_BDC_DATA       USING ' ' ' ' ' ' 'BDC_OKCODE' '=MX07'.
PERFORM FILL_BDC_DATA       USING ' ' ' ' ' '   'BDC_CURSOR' 'QMICON-LTAKTION(07)'.
PERFORM FILL_BDC_DATA       USING ' ' ' ' ' '   'VIQMMA-MATXT(07)' FS_FIELD-MNTXT7.
PERFORM SPLIT_LONGTEXT USING COL_COUNT.
Code for Form SPLIT_LONGTEXT is attached herewith (MATXT1 to MATXT7 are longtext split into 7lines )
Best of luck
KJogeswaraRao

Error while saving text as attachment

Hi All,
When a layout is generated. I get the following error :
Error while saving text as attachment , Size of the attachment is maximun than the size allowed.
I guess the generated layout is automatically saved as attachment. Can any one suggest how to disable the option of automatic saving as attachment
Thanks ,
Kaushik

Hi,
if you want to keep the automatic saving as attachment you might check note 599680.
The saving is done normally in method TextGeneration in the underlying Business Object, e.g. BOSALESDOCGEN, BOACTIVITY or BOSERVICETRANSACTION. There you will find the according code lines in the end.
Regards,
Wolfhard

Error while saving RTOM based campagin when creating the rules

Hi Experts,
My requirement is to configure RTOM in the system. I have created RTOM based campaign and when I maintain conditions in u201CEligibility and Agent skills Rulesu201D assignment block, I am unable to save the campaign. It throws the following error despite maintaining all the required settings in spro.
u201C Error while saving the rule; Contact technical support
Error in rule; navigate to rule details screen to correct it
Data not saved; save log u201D
Looking forward for your responses.
Kindly guide me to a way out for resolving this issue.
Thanks in Advance,
Shruthi

Hi Shruthi,
I know this has been a long while since you posted the question, how did you resolve this error because I am getting the same error.
Many thanks,
Garikai.

Error while saving config in MSY

Hi,
I am working on taking MSA 5.0 SP7 go-live. I am working in MDW. I posted a SDN post long back regarding the custom partner functions in MSA and got it resolved (followed the note 521871). I am trying to do the same in the PROD system and i am facing errors:
-> When i goto Cross-Component Settings->Relationship Categoty-> click on NEW i am getting the errors:
1. 'MTBLLFW-The attribute destination of the business object
relation type is not valid'.
2. 'MTBLLFW-the attribute source of the business object relation
types is not valid'
But it is allowing me to add an entry. When i save my customer entry i am getting the error :
3. 'UI_CORE_SAVE_FAILED_STA-Errors while saving'.
I ran the consolidated prefill for 5.0 and SP07. I followed the same procedure as i did in DEV. In DEV i never got these errors. I was able to create them in the first attempt.
If anyone has any idea please let me know.
Thanks in advance,
Karuna.

Hi,
did you already check i.e. compare the customizing subscriptions for both DEV MDW and PROD MDW sites?
Also you should check & compare the download monitor for CDB load in the CRM system(s).
I assume sth is missing there (see also your other post).
Regards,
Wolfhard

WCM Error while saving Project

Hi,
I am getting following error while saving new created project in cProject.
Saving is not possible because the WFM Core data could not be adjusted
Message no. PRP086
Diagnosis
When checking the project role or project role staffing, differences to the related WFM Core data were found. The project cannot be saved because the data cannot be adjusted. Possible causes for this include:
The WFM Core is not installed locally. When working with the application, the WFM Core service is suddenly no longer available.
The WFM Core configuration has been changed in Customizing.
The WFM Core is only activated after projects have been created. During the automatic adjustment of data, it is determined that resources unknown in the WFM Core are assigned to existing project role staffing.
When working with the application, an existing resource already assigned in the WFM Core is deleted.
System Response
The project cannot be saved.
Procedure
Contact the system administrator if the required resource is not known in the WFM Core. The project can be saved as soon as the resource is created.
Let me know how to resolve this issue??
Thanks in advance,
Atul.

hi Atul,
Are you using WFD server for your resource planning in cProjects???
If yes, you have to do settings in customizing for the same in Workforce deployment server under Resource Management in cProjects.
If not, then do following settings to remove the error you are getting:
1) SPRO -> Collaboration Projects -> Resource management-> Business Partner-> Set Up Integration of HR,
Maintain following setting:
Group Sem. abbr Value abbr Description
HRALX HRAC X Activate HR Integration
2) SPRO -> Collaboration Projects -> Resource management Qualification Management-> Activate Qualification Search and Matchup Using WFM Core
In this, deactivate the use of WFD Core for the qualification match up and the search by deleting the X under Value abbr. in the activity Activate Qualification Match up and Search Using WFM Core.
Hope this will be helpful to you.
Regards,
Niraj Sikligar

I keep getting "Unknown Error while saving"

I keep getting "Unknown Error while saving"
Using APE-11 on Windows 7- This error is a first for me, after many years of using Premiere. The product is a mix of photos (jpg and png), video clips (mpg-2 and mp4), and audio clips (all mp3). When I try to publish as Standard DVD- MPEG-2. I get the error. Error repeats saving as MP4. Error gives no location on the timeline where it is running into an obstacle to saving, so I do not know where to begin looking to remove repair or replace the item causing the 'unknown error'. The prel runs fine, start to finish, giving no indication that the save may run into a problem on final rendering.
I have tried many different options like rendering the entire timeline prior to saving, converting the clips to all be the same format, with no resolution to the problem.
I have worked many long hours for many weeks on this project, and I am not going to give it up, especially when the majority of the clips were created on APE in the first place, and the images are all Photoshop edited images
HELP PLEASE!!
DougN

Screenshot of error message for above issue
Also: Since first report, I have attempted render with all sound clips removed (easiest to to with hundreds of clips/photos), with no help. Same error appears.
I will continue removing aspects of the project until I get a completed save, or until I get an answer here!
After removing the sound and video clips, video saved ok, with blank spots where the missing video clips were. So I reopened the original prel file, and began checking them individually.
When I checked the clip properties, it correctly identified the path to the source video, but when I asked it to 'reveal in project', I got this error
So I assume this is where the SAVE error is happening, but as I am not an Adobe coder, I have no idea what it is telling me.
I did check to insure that the source video from which this clip originates, is in the project assets. I checked all the other clips as well, and any clip from this source video, generates the same error.
The source video runs fine on its own and is an mpeg-2 file.
Properties of the source video are:

Unknown Error while saving the query to My Portfolio

Hi,
We have a report published on the portal and users are accesing these reports completely through portal. After running the report user is trying to save the report to My Portfolio on the portal and it is giving an error as "Unknown Error". Anybody who faced this particular error, please give your suggestion.
Regards
Vijay

Hi Mike,
Please follow the following steps to resolve the issue:
a. Identify the list of users who are getting the unknown error while saving to My Portfolio
b. Provide a role called COM.SAP.IP.BI.Business_Explorer_Showcase
c. Once the role is provided to the users, they will get a new tab called Business Explorer in the portal and ask them to click on that tab and then click on My Portfolio button in the subsequent screens
d. Once the user clicks the My Portfolio tab this will create the KM folders in the backend for the users to save the report at the run time
e. Once this is done, ask the user to log off and log in again in to the portal
f. There after users will be able to save the queries to My Portfolio
g. Once this is resolved ask the security team to remove the COM.SAP.IP.BI.Business_Explorer_Showcase role (this role need not be given for a long time).Points.
Regards
Vijay

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

Error while saving FYV : Gaps in financial year variant periods

Hello Experts,
We are getting an error while saving a new FYV as:
Gaps in financial year variant periods XY
Message no. FGV556
Diagnosis
The period specification has gaps. The periods must be sequentially numbered without any gaps.
System Response
Only a correctly defined period assignment can be saved.
Procedure
Define the periods with consecutive numbers.
Details: The new FYV has 52/53 weeks as posting periods depending on calendar year.
For example, we are trying to define Fisc 2009 as follows. (Fiscal year 2009 = Nov 01 2008 to Oct 31 2009).
Month-Day-Period-Yearshift
11     ---     7     ---     1     ---     +1
11     ---     14     ---     2     ---     +1
11     ---     21     ---     3     ---     +1
11     ---     28     ---     4     ---     +1
12     ---     5     ---     5     ---     +1
12     ---     12     ---     6     ---     +1
12     ---     19     ---     7     ---     +1
12     ---     26     ---     8     ---     +1
12     ---     31     ---     9     ---     +1
1     ---     3     ---     9     ---     0
1     ---     10     ---     10     ---     0
1     ---     17     ---     11     ---     0
1     ---     24     ---     12     ---     0
1     ---     31     ---     13     ---     0
2     ---     7     ---     14     ---     0
2     ---     14     ---     15     ---     0
2     ---     21     ---     16     ---     0
2     ---     28     ---     17     ---     0
3     ---     7     ---     18     ---     0
3     ---     14     ---     19     ---     0
3     ---     21     ---     20     ---     0
3     ---     28     ---     21     ---     0
4     ---     4     ---     22     ---     0
4     ---     11     ---     23     ---     0
4     ---     18     ---     24     ---     0
4     ---     25     ---     25     ---     0
4     ---     2     ---     26     ---     0
5     ---     9     ---     27     ---     0
5     ---     16     ---     28     ---     0
5     ---     23     ---     29     ---     0
5     ---     30     ---     30     ---     0
6     ---     6     ---     31     ---     0
6     ---     13     ---     32     ---     0
6     ---     20     ---     33     ---     0
6     ---     27     ---     34     ---     0
7     ---     4     ---     35     ---     0
7     ---     11     ---     36     ---     0
7     ---     18     ---     37     ---     0
7     ---     25     ---     38     ---     0
8     ---     1     ---     39     ---     0
8     ---     8     ---     40     ---     0
8     ---     15     ---     41     ---     0
8     ---     22     ---     42     ---     0
8     ---     29     ---     43     ---     0
9     ---     5     ---     44     ---     0
9     ---     12     ---     45     ---     0
9     ---     19     ---     46     ---     0
9     ---     26     ---     47     ---     0
10     ---     3     ---     48     ---     0
10     ---     10     ---     49     ---     0
10     ---     17     ---     50     ---     0
10     ---     24     ---     51     ---     0
10     ---     31     ---     52     ---     0
The above entries cover all the dates in calendar year 2009, that is, Jan 2009 to Oct 2009 is covered by periods 10 to 52 and Nov 01 2009 to Dec 31 2009 is covered by period 1 to 9 of the following fiscal year 2010.
Inspite of making sure that all the days of 2009 are covered by periods 1 to 52. We are still unable to save the FYV.
Please help!
Susan

Hello, I am getting this error while saving the FSV. My FSV is based on Weeks. Below is what I am inputting for this. Other details are Calender Year - 2017, No. of posting periods - 53, checked year dependent. Also, I have FSV for previous years also where weeks are 52 but configured as 53. So, hope that this is not creating this issue. Solicit your early response.
Month
Day
Period
Year Shift
1
7
1
0
1
14
2
0
1
21
3
0
1
28
4
0
2
4
5
0
2
11
6
0
2
18
7
0
2
25
8
0
3
4
9
0
3
11
10
0
3
18
11
0
3
25
12
0
4
1
13
0
4
8
14
0
4
15
15
0
4
22
16
0
4
29
17
0
5
6
18
0
5
13
19
0
5
20
20
0
5
27
21
0
6
3
22
0
6
10
23
0
6
17
24
0
6
24
25
0
7
1
26
0
7
8
27
0
7
15
28
0
7
22
29
0
7
29
30
0
8
5
31
0
8
12
32
0
8
19
33
0
8
26
34
0
9
2
35
0
9
9
36
0
9
16
37
0
9
23
38
0
9
30
39
0
10
7
40
0
10
14
41
0
10
21
42
0
10
28
43
0
11
4
44
0
11
11
45
0
11
18
46
0
11
25
47
0
12
2
48
0
12
9
49
0
12
16
50
0
12
23
51
0
12
30
52
0
12
31
1
+1
Thanks
Deepankar

Error while saving project in cProjects

Hello,
I am getting following error while saving a project in cProjects-
Access via 'NULL' object reference not possible.
Details of the error are given below-
Can somebody please help me resolve this error?
Thanks and regards,
Milind Dumbre
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
      caught in    procedure "FINALIZE_OBJECT_BEFORE_SAVE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "LR_CALC").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.

Hi Milind,
You may check the settings by navigating to the following path
IMG --> Collaboration Projects --> Connection to external systems --> Accounting Integration
--> Define Object Links for Accounting Integration.
Check if the RFC destination has been correctly maintained. You may check the correctness of the RFC settings via SM59.
Let me know if this helps.
Regards,
Vivek Pandey

Error while saving Long Texts

Similar Messages

Maybe you are looking for