Error while saving the objects in ID

Dear All,
When I am saving the objects in ID, I am facing with the following error:
[SAP_NWMss][SQLServer JDBC Driver][SQLServer]Could not allocate space for object 'XI_DIRDATACHANNEL' in database 'XD1' because the 'PRIMARY' filegroup is full
Please guide how to solve this error.
Warm regards,
n.jain

Hi Nishu,
ask your xi basis guys to see the disk space of your xi system.........i think the log files of your xi system have consumed too much space on your xi system.... ask your basis guys to make some space available in your xi system then your this problem will be resolved.......
Thanks,
Rajeev Gupta

Similar Messages

Error while saving for Objective setting

Hi,
While saving the Objective setting templates i am getting the error as "Table HRPAD605 is not part of the Customizing object PDST T "
Error documentation is as follows
Diagnosis
Entries in table HRPAD605 cannot be edited in connection with customizing object PDST T as table HRPAD605 does not belong to customizing object PDST T, according to the object definition.
System Response
The function terminates.
Procedure
Check whether the entered objects and keys are correct.Then check in the Implementation Guide whether the object was created correctly.
Correct the object definition or the entry for the Transport Organizer interface.
Thanks

Hello,
Most likely the is an inconsistency with the transport objects PDST and PDWS. Please run RHSOBJCH to correct this inconsistency.
Afterwards you should be able to transport the templates via the catalog or via RHMOVE30. Please make sure that the category ID in the target system is the same otherwise you won't be able to locate the template.
The report RHSOBJCH corrects the missing HR entries in the OBJS table.
This step you need to perform only once. For OSA you need to overtake
*5020 up to *5026, also PAD605,606 and 607 references.
When you have done this (as said, only need to do it once) you can transport the categories and templates via the phap_catalog_pa transaction (righ-mouse click on the to be transported object).
Hope this helps,
Regards and Groetjes,
Maurice

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while saving the excise invoice

Hi All,
I am getting the following error while saving the excise invoice.
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.
I have read all the posts with regards to the error before, however still after doing the required settings I am getting the error. Please let me know for the same.
Kind Regards
Atul Keshav

Dear All,
The issue stands resolved please find below the required settings which need to be done.
You need to maintain the following entries in J_1ITRNACC table
100 DLFC 01 CR PLAAED
100 DLFC 01 CR PLABED
100 DLFC 01 CR PLACESS
100 DLFC 01 CR PLASED
100 DLFC 01 CR PLAAT1
100 DLFC 01 CR RG23AAt1
100 DLFC 01 CR RG23AED
100 DLFC 01 CR RG23BED
100 DLFC 01 CR RG23SED
100 DLFC 01 DR MSUSP
Also the table J_1ITRNACC should include entries for GRPO, CAPE, DIEX, EWPO,
TR6C with subtransaction type 01.
We need to maintain GL Accounts accordingly in the table J_1IEXCACC.
If still the error persists then you need to apply the following notes.
1018071
978186
1032813
The SAP note 1032813 contains the correction for the program MJ1IINF01
you will have to apply this manually.
Kind Regards
Atul Keshav

PSC 2510 - Wireless setup - "Error while saving the settings to the device."

While trying to setup my PSC 2510 to be wireless I get an error message "Error while saving the settings to the device.". This comes after selecting connecting Through Network, selecting printer device, selecting WEP, entering key, and clicking next.
PSC 2510
Windows Vista
Using latest sfotware from HP to install
Thanks
Dennis
This question was solved.
View Solution.

ISSUE RESOLVED .. based on responce from PrintDoc to penn (refrence topic "C4385 Printer - Netgear DGN2000 - wireless setup".
PrintDoc responce helped me find my problem (to reset network settings on the printer to factory) even though diffrent printer.
Thanks

Error While saving the Production Order

Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004

Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar

Error : While Importing the Objects in Quality

Dear all,
I'm facing some error while transporting the Objects to quality server. The error's like
Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
Source system RD1100LS does not exist
Source system RD1100LS does not exist
Source system RD1100LS does not exist
Source system RD1110LS does not exist
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
Anyone suggest me how to solve this error..,
Thanx in Advance..
Regards,
Saran

Hi saran,
Check the source system connectivity of the Quality system. Also check whether you have transported the datasources related to those objects that you transported from DEV to QAS.
First you need to transport the Datasources created in R/3 and then replicate them in QAS/Prod and then transport the objects in BW from DEV to QAS/Prod.
Check all these things and if still the problem persists... Refer to the below threads which may help u...
Transport Problem - Reference to Transfer Structure not available
No Source system exist
Assign points if this helps u...
Regards,
KK.

Automatic Picking giving error while saving the Delivery

Hi
We have done the configuration for doing automatic picking while saving the delivery.
Steps done are
1. TCode V/38
2. TCode OVLT where we have changed the Time value form 3 to 4 for Send Immediate
3. TCode VP01SHP where all shipping points are maintained.
we are getting the following error while saving the delivery.

Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error". Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
G. Lakshmipathi

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

ERROR while saving the runtime systems(read time out exception)

Hi e xperts
I am configuring NWDI and assigned asll the permissions and roles to the CMS user.I created Domain,in landscape configurater
created track and saved.
while saving the rumtime systems the error thrown is
com.sap.cms.util.exception.conf.CMSCCBSCommunicationException: CBS (URL http://dtlepdev:54400/tc.CBS.Appl/archiveapi2/) communication exception: Read timed out (Service call exception; nested exception is:
java.net.SocketTimeoutException: Read timed out)
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.removeBuildspace(CBSConfCommunicator.java:382)
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.deleteCreateBuildspace(CBSConfCommunicator.java:338)
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.editBuildspace(CBSConfCommunicator.java:277)
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.createBuildspace(CBSConfCommunicator.java:168)
at com.sap.cms.pcs.conf.core.services.SystemManagerObject.saveSystem(SystemManagerObject.java:261)
at com.sap.cms.pcs.conf.core.plugin.DefaultTrack.newTrack(DefaultTrack.java:292)
at com.sap.cms.pcs.conf.core.TrackManager.editTrack(TrackManager.java:208)
at com.sap.cms.pcs.conf.manager.CmsConfManager.editTrackConfiguration(CmsConfManager.java:1002)
at com.sap.cms.pcs.conf.manager.proxy.CmsConfProxyBean.editTrackConfiguration(CmsConfProxyBean.java:489)
at com.sap.cms.pcs.conf.manager.proxy.LocalCmsConfProxyLocalObjectImpl0_0.editTrackConfigurationand also ..
Unable to instantiate a Build Space administrator!
Build Space "DTL_ETRACK_C" [bsID: 27, version: 0] [in-queue: on (privileged), out-queue: "on", processing: off]
<null>
[EXCEPTION]
Buildspace DTL_ETRACK_C does not own the workspace ws/ETRACK/dtl.com_DEFAULTIME/cons/inactive/ . It is currently not owned by any other buildspace
at com.sap.tc.cbs.server.rt.bs._BuildSpaceValidator.checkWorkspace(_BuildSpaceValidator.java:120)
at com.sap.tc.cbs.server.rt.bs._BuildSpaceValidator.validateWSs(_BuildSpaceValidator.java:74)
at com.sap.tc.cbs.server.rt.bs.BSAdmin.validate(BSAdmin.java:192)
at com.sap.tc.cbs.server.rt.bs.BSAdmin.updateState(BSAdmin.java:260)
at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.determineChanges(BSAdminOrc.java:439)
at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.validateBuildSpaceData(BSAdminOrc.java:219)
at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.act(BSAdminOrc.java:341)
at com.sap.tc.cbs.server.rt.impl.CourteousTimer.run(CourteousTimer.java:139)
at java.lang.Thread.run(Thread.java:534
In cbs i checked the parametrs they are open and on..
please suggest me on this ASAP..since 2 days i have been struggling and searched in forums..no perfect solution
help me out
perfect soln is immediately awarded...
I
THanks
Mayu

Hi Mayu,
here apparently the CMS cannot communicate to CBS properly and then when CMS tries to talk to CBS using a webservice, it times out due to various reasons, see below.
Strange, I always had this error when the CMS was on a different release like CBS and this caused the communication problem.
Don't you have an entry in your cms log like this?
com.sap.cms.util.exception.CMSUnexpectedException
at com.sap.cms.pcs.conf.manager.CmsConfManager.newTrackConfiguration(CmsConfManager.java:666)
Caused by: java.lang.IncompatibleClassChangeError
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.openConnection(CBSConfCommunicator.java:84)
Please provide me the version of the DI_CMS, DI_CBS (and DI_DTR for the sake of completeness).
You can find this info on the ComponentInfo page.
On 640/700 this is http://<host>:<port>/sap/monitoring/ComponentInfo
as of 710 you find this on the "Components" tab of http://<host>:<port>/nwa/sysinfo
I also think that this is not due to the runtime systems. I guess you have the same problem if you try to create the track without runtime systems, right?
(The "Unable to instantiate a Build Space administrator!" is not necessarily an error, see the note:
#1175019 - Unable to instantiate a Build Space administrator!)
Thank you!
Best Regards,
Ervin

Error while saving the documents in Transactions MIRO,VA02, VA01, ects

Hi SAP Gurus,
i am geting an popup error while saving or after changing the documents in MIRO VA01, VA02 transactions..
The error is * " Condition Table Missing : Access JST1 60 ( Pricing Taxes ) " *
can u please help me out.
Regards
Kumar m

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Error while saving the FM8 XML file

Hello,
While saving the FM8 XML file, an error message appears (see attached screen shot).
Is there a solution to resolve this issue? Please suggest.

Hi,
This type of error is non-descript and could be caused by any number of things. It is impossible to troubleshoot from here based solely on that message. Let me ask a couple of questions, though:
- Are you using structured FrameMaker? If so, are you using a structured app that has worked successfully before? In other words, did this just suddenly start happening to an otherwise-stable process?
- Is there anything unusual about your layout; that is, anything other than a single text flow with graphics?
Russ

Error while saving the GTC

Hi All,
I am getting below error message, when I try to save GTC created.
"An error occurred while saving the information for generic technology connector S2TSI TRUSTED CONNECTOR. Check the application logs for more details. "
Even I am getting the same error when I try to modify the existing GTC connectors.
Can someone please let me know how to resolve this issue. I am not able to locate the log files where I need to check.
Thanks in advance.....
Regards
Arun

Hi Arun,
what type of GTC you are creating (Flat file / Database)?
Regards,
Sheik

Error While saving the project

Hai sapians,
I am using the solution manager for the first time.I am getting the error -Project save cancelled(Message no. SPROJECT345) While saving the project in the T-code-solar_project_admin. What could be the problem ?
Thanks
Sukumaran.E

Hi,
Except this I am not getting any long text. After pressing saving I am getting a POPUP asking for Enhancement (/KWCUST/) Release(620) After this I am Getting the error and there is no other text.
But in the General Data tab I am not able to give Project Description (It gives error message Authorization Check Error Message no. SOLAR409).
Thanks
Sukumaran.E

Error While saving the tabulator results recording(QE71)

Hi Experts ,
through the Tcode QE71 i'm recording the inspection points and the inspection results but while Saving the recorded results , the system is giving error as " No Orignal values " and also as "inspection Pt 99999 of the Characteristics .....is not avaialable".
What might be the possible reason for the same. But when i'm entering the results through the Tcode QE01 all the results are saved and closed.
Can anybody help me out of this.
B'regards
Krishna

Hi,
Can you call your web service using jQuery not in an app successfully?
As the error message suggests, it might be an error on the server side.
I suggest you do a simple test to check whether you can call the web service using jQuery.
Here are two links would provide more information about troubleshooting this error for your reference:
http://sadomovalex.blogspot.com/2013/08/return-json-from-asmx-when-call-it.html
http://www.codeproject.com/Tips/761116/Troubleshooting-an-Issue-With-Calling-an-asmx-Web
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

Error while saving the objects in ID

Similar Messages

Maybe you are looking for