Error while schedulingg update stat in db13

Dear Experts,
Please look into my issue we are facing an error while scheduling update statistics in db13 and I tried to open detailed log
It is given
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error: For More Information, See SYS
Please help me how to solve this my error
Regards

Hi,
Check the owner for BRBACKUP, BRARCHIVE, and BRCONNECT in kernel,
these files should be with SIDADM, if not change the owner to SIDADM and rerun the update stats.
and also Refer the note 446172
Regards,
Ram

Similar Messages

  • Error  while gather schema stats

    Hi,
    I am getting the error while gather schema stats
    -1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
    Unable to correctly update the history table - fnd_stats_hist.
    -1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
    -Sagar

    Ariz,
    The FND_STATS package provides procedures for gathering statistics for Oracle Applications database objects. It also provides procedures
    for storing the current statistics in a table (FND_STATTAB) and restoring them back. This package also facilitates the gathering of some statistics in parallel. This package calls the DBMS_STATS package.
    The FND_STATS package also has procedures to populate the FNDSTATS_HIST_* table to record the historical information of time taken for gathering the
    statistics for the different types of objects.
    Famy

  • Error while generating remuneration statement

    Hi
    I found an error, while generating remuneration statement. The error is "Start date 01.01.1800 is higher than end date 00.00.0000".
    Kindly help
    Shadeesh

    Hi shadeesh,
    Please check the payroll control record's start date and end date in PA03
    regards,
    Ayyaps

  • Error while activating update rule in Inventory

    I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
    Recieved an error while activating update rule  0RT_C17 2LIS_03_BF in Inventory module.
    When I checked the routine ,it shows the following error.
    Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
    I am not usre how to resolve this.
    Kindly reply asap.

    1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
    2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
    3. Then try to migrate you datasource and activate you update rules.
    it may help you
    Regards.
    Rambabu

  • DML Error logging for Update statement

    Hello,
    I am facing a problem with regard to DML Error logging with Update statement .
    oracle : 10.2
    I am executing following DML update:
    BEGIN
    UPDATE
    table_1  a
    SET a.Exp_DATE =a.EFF_DATE
    WHERE  a.col_a1 != (SELECT b.colb1
                         FROM table_2  b
                         WHERE  a.msisdn =b.msisdn )
    LOG ERRORS INTO table_1_ERR REJECT LIMIT UNLIMITED;                        
    END ;    I was expecting that "ORA-01427: single-row subquery returns more than one row" would be captured in LOG error table "table_1_err"
    but instead I got run time error and whole dml was rolled back.
    Please let me know whether this exception is not captured by DML error logging.
    Thanks,
    Abhishek

    *Oracle logs the following errors during DML operations:** Column values that are too large.
    * Constraint violations (NOT NULL, unique, referential, and check constraints).
    * Errors raised during trigger execution.
    * Errors resulting from type conversion between a column in a subquery and the corresponding column of the table.
    * Partition mapping errors.
    >
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/transform.htm#sthref777

  • Error while downloading updates on ZTE Open

    Hello, sorry guys for asking lot of questions. I have purchased ZTE Open from ebay store(UK) and i wanted to update my phone to FF OS(1.1) but when i click on Check Now button after sometime it says "Error While Downloading Updates"
    Any Solution?

    OTA 1.1 is still delayed to be pushed, hopefully soon. What you are seeing is a bug that ZTE are aware off & should be fixed with next round of updates. Ignore for now. It's not 1.1, or any update for that matter, just a false alarm.

  • ASSERTION FAILED error while migrating update rules

    Hi all,
    We are migrating the 3.x datasource for sd - lo cockpit.
    Migration steps are as follows...
    1. Make a copy of the infosouce. Activate it.
    2. Migrate transfer rules. Activate it.
    3. Migrate datasource.
    4. Migrate Update rules for the respective info providers.
          But while migrating update rules  ASSERTION_FAILED runtime error occurs.
           the assert condition was violated.
           CL_RSTRAN_TEMPLATE========CP or CL_RSTRAN_TEMPLATE======CM003
    Please help i tried all the means to rectify but none succeds.
    It is occuring for each datasource .
    Thanks in advance.
    aravind

    Hello
    Assertion statement is like a conditional break point in ABAP. When you are trying to migrate the update rules,it is failing with Assertion statement it means there is some error with your update rules. Either the mapping is wrong or the the target to which it is mapped is in inactive state. Please check these and retry your migration.
    Regards,
    Krishna Tangudu

  • Error while Transporting Update Rules.

    hi xperts,
       I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
        Start of the after-import method for object type R3TR ROUT (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
    The errors affect the following components:
        BW-WHM (Warehouse Management)
    Is the  error,I didn't change any thing in the Cube or changes to Update rules.
    Can anybody Help me?.
       thanking you,
                                   with regards,
                                   Narendra.

    Hi,
    Are you still facuing the issue ?
    No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
    If you know the technical names of the routines you can check in the TADIR table.
    Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
    Hope it helps.
    Thanks,
    Soumya

  • Error while transporting update rule.

    Hi experts
    I am trying to transport one update rule to production..
    But it is ending with error code 8 n it is giving me following error :
          Errors when activating update rule XXX
          IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
    Kindly tell me what need to be done now.
    Regards
    Swati

    Hi  Swati,
    Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
    Whenever you transport anything into the quality or production, the list should be as followed in the given manner : 
    Seq No     Objects in Request
    1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
    2     Function Modules
    3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
    4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
    5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                    Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS) 
                    and Tables (TABL)
    6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
    7     Update Rules(UPDR, ROUT)
    8     Infopackages(ISIP)
    9     Queries(ELEM)
    10     Webtemplates(TMPL, BLTM, BPTM)
    Just transport all your things in the above sequence, and it will be done successfully.
    Also, remember  there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
    Hope it helps,
    Regards,
    Neha.

  • Error while uploading Bank Statement in FF.5

    Hello all
    I am getting the following error while uploading the Bank Statement file in FF.5-
    Termination in statement no. 00000 of acct  ; closing record 62F missing
    The file format is MT940.
    Can somebody throw some light on this message if any1 has encountered this.
    Thanks in advance
    Hrishikesh

    Hi,
    The error itself is telling u that the closing balance in the bank statement is missing. Check the MT940 format statement in that check whether field 62F is present or not. If that line is missing then system cant understand the format.
    regards
    srikanth.

  • Error while uploading Bank statement for BACS

    Hi All,
    We are facing a error while uploading a bank statement for BACs, the system is not autoposting (clearing the open items) for the BACs file. The bank statement is as below
    :20:20081015
    :25:200000/50414107
    :28:28290/01
    :60F:C081015GBP1176,45
    :61:0810151015DX448,97FDDRNONREF//
    :86:999/00DDRARVAL             1875180          
    :61:0810151015DX779,07FDDRNONREF//
    :86:999/00DDRBP OIL UK RECPS AC230679BI2898784  
    :61:0810151015DX24469,50FDDRNONREF//
    :86:999/00DDRSAPBACS0000341816               BACS
    :61:0810151015DX233018,83FDDRNONREF//
    :86:999/00DDRSAPBACS0000340411               BACS
    The last line items BACS file is not posting the document but we have manually auto cleared the document.
    Can any one let me know what has caused the error. And where to check out the setting of this.
    Thanks and Regards
    Sri

    solved myself

  • DSO error while creating update rules

    Hi All,
              i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
    ERROR:  infoobject 0recordmode is missing from the infosourse
    Can any one help, points are assured for the suggestions
    Thanks in advance
    Peddinti

    Hi,
      Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
    Regards
    Sankar

  • Table or view does not exists error while executing select statement

    Hi,
    I am new to Oracle. I am getting a error while executing the select statement if i give table name without double quotes.
    Ex: Select * from Customer;
    But working fine when the table name is enclosed within a double quotes.
    Ex: Select * from "Customer";
    Is there any way to execute the select statement without the double quotes?
    Actually I am using NHibernate objects for data access.
    Thanks,
    Sai

    Actually I am using NHibernate objects for data access.And probably that's the problem:
    SQL> select * from mytab;
             A
             1
    SQL> select * from mYtAb;
             A
             1
    SQL> select * from MYTAB;
             A
             1
    SQL>  select * from MYTAb;
             A
             1Oracle statements are case insensitive and doesn't require double quotes unless the object names are reserved words.
    As wrote by others if table is created using double quotes it's name bacomes case-sensitive... and this could be the problem...
    Max
    [My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/02/05/gestione-degli-errori-in-sql-con-log-errors/]
    Edited by: Massimo Ruocchio on Feb 5, 2010 7:08 PM
    Added last comment..

  • Error while replacing IF statements with DECODE function in procedure

    Hi All,
    I have created a procedure which has nested IF statements. Now I want to replace the IF statements with DECODE functions to improve performance.
    Procedure:
    IF (var_int_sev = '0')
    THEN
    var_sev := '2';
    ELSE
    SELECT sev
    INTO var_int_sev
    FROM errorconfig
    WHERE errorcode = var_errorcode;
    var_sev := var_int_sev;
    END IF;
    I converted the above IF statement into DECODE function as mentioned below:
    var_Sev := DECODE(var_int_sev,0,2,SELECT severity FROM errorconfig WHERE errorcode=var_ErrorCode)
    But it throws below error at the select statement used inside DECODE.
    Error(58,51): PLS-00103: Encountered the symbol "SELECT" when expecting one of the following: ( - + case mod new not null others <an identifier> <a double-quoted delimited-identifier> <a bind variable> avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date <a string literal with character set specification> <a number> <a single-quoted SQL string> pipe <an alternatively-quoted string literal with character set specification> <an alternativ
    Can someone help me in converting the IF to DECODE in the above case. Also how can we use a select statement inside decode.

    instead of trying to rewrite all your code and hoping that the performance will be better, it's a better option to investigate and find out which part of your application is slow
    read this:
    When your query takes too long ...

  • 'L_CHAVL_IN' Error while Activating Update Rules.

    Hi All,
          when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
       i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
        Please give me a solution how to solve this.
    Regards,
    Ramana.

    Check the following SAP Note (# 782858)
    <b>Symptom</b>
    When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
    <b>Other terms</b>
    Syntax error; generation; l_chavl_in; update rules
    <b>Reason and Prerequisites</b>
    This is a program error. The error only occurs under the following circumstances:
    You generate an optimized update rule;
    An alpha conversion is required.
    <b>Solution</b>
    BW 3.0B
               Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
    BW 3.10 Content
               Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
    BW 3.50
               Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
    Assign pts if helpful.<b></b>

Maybe you are looking for

  • Disk Utility - Error message...how do I fix this???

    My powerbook has been running a little sluggish, so I decided to run Disk Utility and the following message appears: First Aid failed. The underlying task reported failure on exit. Can anyone let me know how to solve this???

  • How to display Process name in UWL

    Hi All,    I have integrated the GP and UWL and now I want to display process name in the UWL tasl list(instead of action name). Thanks Raja

  • Why is the file size so small?

    Why is a certain file of about 40 MB that I created, possibly with InDesign CS2, reduced to about 6 MB when I open and rename it using "save as" in InDesign CS4? The 40 MB and 6 MB versions both look identical on the screen and when printed. This jus

  • How much does an iphone 4 16GB Unlocked cost at the apple store

    I would like to know how much is an iphone 4 16gb unlocked at the apple store, i have been looking for the price but i can't find it.

  • Google/Bing Zoom Level

    I have successfully configured Google/Bing map tile layer with our own map tile layers. I want to add more zoom levels than in Google/Bing map, this is because some of our map tile layers in our applications cannot visible properly in last "*zoom In*