Error while sending SOAP Request to server through XML Spy
i have created a webservice to jdbc scenario application and when i tried to check my webservice with XML Spy by giving inputs to wsdl file as SOAP Request to server, its showing the error like this:
<b><u>Http error : could not POST File</u></b>
It would be good if u explain step by step procedure how to solve the issue.
Thanks & Regards.,
Pushparaju.B
This is the error showing after clicking OK button after it showed the error
Http error : could not POST File
<b><?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>DeliveryException</code>
<text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:PL_TIMEOUT:
at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:451)
at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:125)
at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope></b>
yes i have the role of XIAPPLUSER
scenario has created by me and i have the authorization to enter into XI
Similar Messages
-
HTTP error while sending SOAP request using wsdl file
We created SOAP request using the wsdl file ; while sending SOAP request from Altova XMLSpy, we are getting the below error.
HTTP error: could not post file
Can you please explain how to resolve this issue
Regards,
Sanghamitrathere is very little information to help you here.
Can you confirm if this is a SOAP sender scenario or SOAP receiver scenario?
Also do go to thru these links to help you out;
Troubleshooting
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> SOAP
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP <-> XI <-> RFC/BAPI
Walkthrough - SOAP XI RFC/BAPI -
Error 401 while sending SOAP Request to XI
hi friend ..
i am getting Error 401 while sending SOAP Request to XI..
can u suggest me where may be the error?
thanks..Hi,
Refer these threads:
Testing XI SOAP scenario via XMLSpy
Re: SOAP Sender ADAPTER 401 No Authorisation
Re: XI Web Service - Code: (401) Unauthorized.
Try soap client https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9b16d790-0201-0010-4e9b-baa5f42830d8
Regards
Suraj -
SOAP Receiver- Error While Sending Message: 500 Internal Server Error
Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
AbhishekHello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM -
Imp: Error while sending message: 500 Internal Server Error
Hi all
while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
<b>"Error while sending message: 500 Internal Server Error "</b>
It seems that integration server is not picking up the messages.
Can anyone help me on this?
thanks
AbhishekHi Abhishek,
Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
Please do refer the below blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Prasanthi. -
Authentication Error while Sending Email from SMTP server.
Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.
no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue. -
" Error while sending message: 500 Internal Server Error" RNIF Adapter
Hi,
I have configured B2B integration as Sender : RNIF adapter & Receiver: XI Adapter.
I am able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
Error while sending message: 500 Internal Server Errot.
Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
Thanks
LaxmanHope this helps..
-Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
Try taking the payload from sxmb_moni and enter it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message. check what is behaviour -
Getting following error when sending soap request to PI
Hi All,
I am trying to send the following soap request to XI
=======================================================================
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:gip="urn:pmintl.com/Gips02">
<soapenv:Header/>
<soapenv:Body>
<gip:MT_GIPSTOSMDLSYN_REQ>
<Source>
<xmlDocument><sender><name>GiPS</name><environment>Dev</environment><UserID>ymargub</UserID></sender><message GiPSChange="C69695" op="Release"><Col N="RELEASE_DATE">2009-01-22</Col><Col N="CHG_DESCRIPTION">Automatic Release</Col></message></xmlDocument>
</Source>
</gip:MT_GIPSTOSMDLSYN_REQ>
</soapenv:Body>
</soapenv:Envelope>
================================================================================
I am getting a error as shown below . In runtime workbench under communication channel it is also showing "null pointer exception". The details of message given below . Can anyone please analyse where it is going wrong. Everything from sender agreement to communication channel is in place.
=================================================================================
<!-- see the documentation
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Body>
- <SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
- <detail>
- <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>java.lang.NullPointerException at com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageOperator.getQualityOfServiceAsString(XMBMessageOperator.java:2048) at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:843) at sun.reflect.GeneratedMethodAccessor789_10002.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttributeHi,
Please cross check the URL that you are giving in Proposed URL option wihile you are generating the WSDL.
Type the URL that you are using as i mentioned in above in Intenet Explorer and press Enter. This should give Message servelet ok.
Then clear CPA Cache and test your scenario, it will work ( Provided you should fill SOAP Adatpter parameters correctly in ID).
Thanks
Subbu -
Error while posting SOAP request
Hi All,
I am working on one SOAP to RFC syncronous scenario,
when i am checking the scenario using XML spy i am getting following error,
Please help me
<?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: com.sap.aii.af.ra.ms.api.MessagingException: Could not parse XMBMessage due to invalid content type for SOAP: TEXT/HTML
at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:158)
at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:916)
at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
when monitoring communication channel it is showing status "request received , error occured"
Regards
Pradeep P NHi Pradeep,
I request u to just check in RWB, in component monitoring, the status of integration server and adapter engine.......if it is red, then ask your basis guys to remove that error................just check your comm channels, i think your comm channels are in error, if they are just edit them, save and activate them again..........i think then your this issue will be resolved.'
I think some port information has been edited recently.
Make sure that ur ABAP and java stack are at same patch levels after the upgrade.
try this too
com.sap.aii.af.ra.ms.api.DeliveryException: Exception in method process
and this
com.sap.aii.af.ra.ms.api.DeliveryException: Exception in method process ?
Regards,
Vinod. -
SMICM error while sending mail using SMTP server
Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanksalso getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() -
Error while connecting oracle11g to sql server through transparent gateway
Hello
i'm facing this errors when i try to connect oracle 11g to sql server through transparent gateway:
http://www.freeimagehosting.net/newuploads/d4454.jpg
the directory for my db is : C:\oracle\product\11.1.0\db1
and for the gateway: C:\oracle\product\11.1.0\dg4msql
the configurations i used:
gateway :
tnsnames.ora:
dg4msql =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=Kinda-PC)(PORT=1522))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
listener.ora:
GATELIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Kinda-PC)(PORT = 1522))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = dg4msql)
(SID_NAME = dg4msql)
(ORACLE_HOME = C:\oracle\product\11.1.0\dg4msql)
and for the oracle database :
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = Kinda-PC)(PORT = 1521))
tnsnames.ora:
DB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Kinda-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = db1)
gateway =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=Kinda-PC)(PORT=1522))
(CONNECT_DATA=(SID=dg4msql)
(HS=OK)
thanks :)
Edited by: 903043 on Dec 18, 2011 6:18 AMDid you go through the various steps in the doc?
There is a gateway specific forum below;
Heterogeneous Connectivity
Cheers
David -
Error while sending SOAP message to PI
Hi Guyz,
I have a sync-asyn scneario SOAP to File via PI. When I test the scenario using test tool i.e SOAP UI , scenario runs fine. But when user is trying to send a message they are getting Error message as response . "No SOAP Envelope but 1 {}.
Any idea what is this error. I tried to test the scenario with the same XML message that they are using.
Regards,
Loveena.Hi Loveena,
What kind of application tries to connect with PI?
Have you tried to mark Use No SOAP Envelope (Point 4. https://help.sap.com/saphelp_nw73/helpdata/en/48/3555240bea31c3e10000000a42189d/frameset.htm)?, in this way you can check that the message at least comes to PI.
Regards. -
Error while sending a PO as idoc through message control
hi,
i am getting this error when i manually enter a output type in ME22N transaction. This output type is supposed to send a ALE Orders idoc to the ABC610 system.
Partner ABC610 does not exist for partner function LS
Message no. VN006
Diagnosis
Partner does not exist for the partner function selected for this
transaction.
Procedure
Check your input.
pls help. Points will be awarderd for helpful answers
~SureshHi Naveen,
Yes, Sorry forgot to mention in my previous post. The Partner profile with the same name exists in WE20 and also the outbound parameters are populated correctly to send the IDOC.
I also checked BD64 and the model is defined and distributed successfully.
any other inputs what else to check?
~Suresh
ANy inputs on this?
Edited by: Suresh Reddy on Jan 16, 2008 7:37 PM -
Transportation failed while sending a request from DEV - Quality
Hi sdns,,,
I got an error while sending a request from DEV -> Quality...Am new to transportation.. mayi know.. wat was this error and wat kind of action i need to take over here...
I got an error message like this,,
Start of the after-import method for object type R3TR ELEM (Activation Mode)
Element 0QWSUMHUOOK19OOUIFCLB4T8C was copied from 'modified' to 'active'
Error when activating element 45HKXU7KAG6V1I0L1W3LWEDZC
Element 3Z571P6G8RCDNR3NQAEI8S6YW is missing in version M
Start of the after-import method for object type R3TR ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20070417044624
Post-import methods of change/transport request I11K903499 completed
Start of subsequent processing ... 20070417044621
End of subsequent processing... 20070417044624
Answering getz really appreciated,
Thanks & Regards,
AluriHi,
This error will come when your are transporting any Query/ BW elements to Production system.
when there is element in the deve. class $TEM in your collected objects this error may come, so identify this elements and change this Dev.class to other package used in transportaion.
To change all the elements to common dev. class first collecting the elements using transport connection. secondly, using the Pencil button at the menu of trasnport change to required dev.class.
you can change individaul elements also.
Regards,
Vish. -
Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures.
Maybe you are looking for
-
I'm trying to use the Rank function in a report and I'm having issues getting it to work. I'm using the Shared Activities subject area and would like to rank activities by Contact. Since there are multiple activity association to the users (attendee
-
How do I get all of my songs into ONE list?
The subject line sums it up. I don't need or want my songs scattered into different categories all over the place. That might be fine for others, but I want only ONE list. How do I achieve this?
-
Can't get flash to work as 'installer' opens a script file.
I've downloaded the latest version of flash from the website but when i open the file there is a load of script and the installer doesn't start. Can anyone help me with this?
-
I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer. Any help is
-
Here and in other places, I have seen several complaints about lack of a correct battery level indicator. This seems to be the case with more than one phone model. Considering short battery life, it is a real problem that battery level cannot be chec