Error While Starting XL Reporter Addon on SAP Business One Server
Hi Everyone,
I have got the following error message while starting XL Reporter Addon on SAP Business One Server:-
1. "Unable to Connect SAP Business One, Connection string is not valid [66000-84]. The user is not licensed."
2. "Addon does not have a License"
while license is installed on this machine.
Hi,
Try these below steps:
In Business One from the main menu go to Administration -> License -> License Administration.
Select the user you wish to connect to the XL reporter.
Assign the user the SAP AddOn License.
JimM
Similar Messages
-
XL reporter issue in SAP Business one 2007 B patch 15
Hi expert
We are using SAP business one 2007 B patch level 15
on our server we have Microsoft office 2003 and on server XL reporter runing as normal,
but on one client we have Microsoft office 2007 and on this client we unable to run XL reporter.
I want to know what can be possible way to run XL reporter on client where we have Microsoft office 2007.
Regards
Arun K SinghHi Arun,
You may check this thread first:
Re: XL reporter addon error
Thanks,
Gordon -
How to connect crystal report 2013 using sap business one data source
hello Professionals .
when i try to use data source sap b1 in crystal report 2011 or 2013 i got no list in company database,
when i try to write it manual i got error "Connection failed".
I tried to connect OLE DB and ODBC all work fine with me.
i attached some snapshots .
Any Advice Please ?Hi Mohamed,
Please check below link.
SAP Crystal Reports 2011/2013 doesn't show Company Data Base
SAP Business One Data Source in Crystal
Crystal Reports - How To - Connecting to your SAP Database - YouTube
Migrating Crystal Reports of SAP Business One from SQL Server to SAP HANA
Hope this helps
Regards::::
Atul Chakraborty -
How to install sap business one server in Linux OS
Dear all,
Please give solution for this question.....Hi,
SAP B1 will not support linux OS. Please check below guide:
http://rels.co.il/wp-content/uploads/2013/02/System-and-Hardware-Requirements-Guide-for-SAP-Business-One-8-8-and-higher.…
Thanks & Regards,
Nagarajan -
Error while starting the report server
When starting report server in Oracle 10g Reports from command prompt with
rwserver server='server_name' It is flashing a error "'The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll"
do anyone have solution for this.Hello,
This kind of problems may occur when several Oracle products are installed.
Create a BAT file that will set the PATH variable before calling rwserver.exe
Example :
set ORACLE_HOME=d:\oracle\oas10g
set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\jdk\jre\bin\client;%ORACLE_HOME%\jlib;%ORACLE_HOME%\jre\1.4.1\bin;%ORACLE_HOME%\jdk\jre\bin\classic;%ORACLE_HOME%\jdk\jre\bin;%ORACLE_HOME%\jdk\bin;
rwserver server='server name'
Regards -
Error while importing external Crystal report in SAP Business One
Hi Experts,
while importing External crystal report in SAP Business one i was unable to import the report and it is not displaying any error message or success Message but after completion if i click on the report i am getting an Error as
No Matching Records Found 'Queries' (OUQR) (ODBC-2028) Message[131-183]Hi,
Please refer SAP note:
1532509 - Cannot import Crystal Report template into SAP Business One
Thanks & Regards,
Nagarajan -
Error while starting stand alone applicaitons in Web Center Content
Hi All,
I am getting this error while starting any standalone component in Oracle WebCenter Content Server :
WARNING: Jps platform factory creation failed. Reason: {0}.
java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-0
*0065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundExcep*
tion: oracle.security.jps.tomcat.JpsTomcatPlatformFactory.
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.ee.JpsPlatformFactory.getPlatformFactory(JpsPlatf
ormFactory.java:185)
at oracle.security.jps.ee.JpsPlatformFactory.getPlatformFactory(JpsPlatf
ormFactory.java:146)
at oracle.security.jps.internal.audit.AuditServiceImpl.initAuditor(Audit
ServiceImpl.java:319)
at oracle.security.jps.internal.audit.AuditServiceImpl.getAuditor(AuditS
erviceImpl.java:238)
at oracle.security.jps.internal.audit.AuditServiceImpl.getAuditor(AuditS
erviceImpl.java:373)
at oracle.security.jps.util.AuthZAuditUtil$3.run(AuthZAuditUtil.java:183
at oracle.security.jps.util.AuthZAuditUtil$3.run(AuthZAuditUtil.java:181
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.AuthZAuditUtil.initAuditor(AuthZAuditUtil.ja
va:181)
at oracle.security.jps.util.AuthZAuditUtil.isEventLoggable(AuthZAuditUti
l.java:136)
at oracle.security.jps.util.AuthZAuditUtil.auditAuthZ(AuthZAuditUtil.jav
a:427)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:554)
at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(C
sfUtil.java:643)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.getCred
entialMap(SspCredentialStore.java:497)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idc.conversion.jps.CSFKeyLoaderAction.run(CSFKeyLoaderAction.java:56)
at java.security.AccessController.doPrivileged(Native Method)
at idc.conversion.jps.CSFKeyLoader.readKeys(CSFKeyLoader.java:166)
at intradoc.conversion.StandardKeyLoader.load(StandardKeyLoader.java:61)
at intradoc.conversion.SecurityObjects.loadKeys(SecurityObjects.java:528
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:133)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPas
swordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(Crypto
PasswordUtils.java:136)
at intradoc.server.IdcSystemLoader.managePasswords(IdcSystemLoader.java:
*3118)*
at intradoc.server.IdcSystemLoader.finishInit(IdcSystemLoader.java:396)
at intradoc.server.IdcSystemLoader.init(IdcSystemLoader.java:335)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:120)
at intradoc.apputilities.idcshell.InteractiveShellStartup.init(Interacti
veShellStartup.java:253)
at intradoc.apputilities.idcshell.InteractiveShellStartup.startup(Intera
ctiveShellStartup.java:52)
at IdcShell.main(IdcShell.java:27)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.loader.IdcClassLoader.invokeMain(IdcClassLoader.java:352)
at intradoc.loader.IdcClassLoader.startMain(IdcClassLoader.java:170)
at intradoc.loader.IdcClassLoader.main(IdcClassLoader.java:140)
Caused by: oracle.security.jps.JpsException: JPS-00065: Jps platform factory cre
ation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.tomc
at.JpsTomcatPlatformFactory.
at oracle.security.jps.ee.JpsPlatformFactory$2.run(JpsPlatformFactory.ja
va:193)
at oracle.security.jps.ee.JpsPlatformFactory$2.run(JpsPlatformFactory.ja
va:186)
*... 41 more*
Mar 7, 2013 2:55:58 PM oracle.security.jps.internal.audit.AuditServiceImpl initA
uditor
WARNING: Failed to get server log directory. Reason: oracle.security.jps.JpsExce
ption: JPS-00065: Jps platform factory creation failed. Reason: oracle.security.
jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.
lang.ClassNotFoundException: oracle.security.jps.tomcat.JpsTomcatPlatformFactory
intradoc.common.ServiceException:
at intradoc.server.IdcServerManager.init(IdcServerManager.java:230)
at intradoc.apputilities.idcshell.InteractiveShellStartup.init(Interacti
veShellStartup.java:253)
at intradoc.apputilities.idcshell.InteractiveShellStartup.startup(Intera
ctiveShellStartup.java:52)
at IdcShell.main(IdcShell.java:27)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.loader.IdcClassLoader.invokeMain(IdcClassLoader.java:352)
at intradoc.loader.IdcClassLoader.startMain(IdcClassLoader.java:170)
at intradoc.loader.IdcClassLoader.main(IdcClassLoader.java:140)
Caused by: intradoc.data.DataException: !apErrorWithTable,DocMetaDefinition
at intradoc.shared.MetaFieldData.initIndexes(MetaFieldData.java:171)
at intradoc.shared.MetaFieldData.init(MetaFieldData.java:84)
at intradoc.server.subject.MetaDataSubjectCallback.cacheMetaData(MetaDat
aSubjectCallback.java:42)
at intradoc.server.subject.MetaDataSubjectCallback.refresh(MetaDataSubje
ctCallback.java:35)
at intradoc.server.IdcSystemLoader.loadCachedTables(IdcSystemLoader.java
*:1255)*
at intradoc.server.IdcSystemLoader.loadCaches(IdcSystemLoader.java:1164)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:132)
*... 10 more*
Caused by: intradoc.data.DataException: !syColumnDoesNotExist,dDecimalScale
at intradoc.data.ResultSetUtils.getIndexMustExist(ResultSetUtils.java:44
*7)*
at intradoc.shared.MetaFieldData.initIndexes(MetaFieldData.java:167)
*... 16 more*
Error with table 'DocMetaDefinition'.
The column 'dDecimalScale' does not exist in this table.
I am using 11.1.1.6 free version of webcenter content and using appropriate database with required tables created by RCU of appropriate version and also using required weblogic server.
Is there anything like , we are not allowed to use stand alone application in free version ? or problem is something else.
Thank you in advance.
Edited by: 957580 on Mar 7, 2013 2:01 AMHi Deepak,
Thanks for Reply.
But in /home/sapcs/conf/http.conf file its already maintained like this, sending you some part of httpd.conf file
Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the #<VirtualHost> # directive.
Change this to Listen on specific IP addresses as shown below to prevent Apache from glomming onto all bound IP #addresses.
Listen 1090
User/Group: The name (or #number) of the user/group to run httpd as.
It is usually good practice to create a dedicated user and group for
running httpd, as with most system services.
User sapcs
Group sapsys
</IfModule>
</IfModule>
even after restarting server i am getting same problem
[sapcs@hpsebdev1 bin]$ apachectl start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
I am using a non root user to start apachectl command
Regards
Gagan Sharma -
Getting error while starting the RAC instance through SRVCTL utility
Hi DBA's,
We are getting the below error while starting the Orcale 10g RAC instance on one of the node thru SRVCTL:
oracle:/home/oracle]>srvctl start instance -d SQLTSTM2 -i SQLTSTM21
PRKP-1001 : Error starting instance SQLTSTM21 on node r1racd
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.SQLTSTM2.SQLTSTM21.inst' has placement error.
:oracle:/home/oracle]>
srvctl status database -d SQLTSTM2
PRKO-2015 : Error in checking condition of instance on node: r1racd
Instance SQLTSTM22 is running on node r2racd
oracle:/opt/oracle/product/10.2.0/db]>
NOTE: but i am able to start the instance thru SQLPLUS.
After starting the instance thru SQLPLUS i checked the CRS_STAT -t . It shows the status offline... Please find the details below:
Name Type Target State Host
ora....21.inst application OFFLINE OFFLINE
ora....22.inst application ONLINE ONLINE r2racd
ora....VLM2.db application ONLINE ONLINE r2racd
ora....21.inst application ONLINE ONLINE r1racd
ora....22.inst application ONLINE ONLINE r2racd
ora....STM2.db application ONLINE ONLINE r2racd
ora....SM1.asm application ONLINE ONLINE r1racd
ora....CD.lsnr application ONLINE ONLINE r1racd
ora.r1racd.gsd application ONLINE ONLINE r1racd
ora.r1racd.ons application ONLINE ONLINE r1racd
ora.r1racd.vip application ONLINE ONLINE r1racd
ora....SM2.asm application ONLINE ONLINE r2racd
ora....CD.lsnr application ONLINE ONLINE r2racd
ora.r2racd.gsd application ONLINE ONLINE r2racd
ora.r2racd.ons application ONLINE ONLINE r2racd
ora.r2racd.vip application ONLINE ONLINE r2racd
Thanks in advance...
AnilUse the 'srvctl config database -d ' command to check if the instance has been configured in the Oracle Cluster Registry; make sure that the GSDs are running on each node in the cluster.
Also refere to Metalink note 295328.1 -
Crystal Reports Dynamic Parameters with SAP Business One
Okay, I've got this very strange issue with dynamic parameters in Crystal Reports connected to SAP Business One.
Let's start with the software versions:
- Crystal Reports 12.3.0.601
- SAP Business One 8.8 (8.80.231) SP: 00 PL: 13
- Windows XP SP3
(SBO Server on Windows 2003 and SQL 2005)
What I'm about to describe is something I've tried in several reports and for which I created a very, very simple test report to see if it was reproducible in a very simple situation.
- I connected to a Business One server through CR's SBO connection type. Logon is successful, tables are shown.
- I pick OCRD and plac CardCode and CardName in the details section on the report. Previewing the report shows data.
- I create a dynamic parameter on CardCode and in the Select Expert I select the CardCode field and define that that should be equal to the parameter.
- I preview the report again. Now it asks me in such a parameter screen for logon credentials. It shows the server and database it tries to connect to and in the username it shows the SQL Server username I used to connect to the SQL Server in the first place. However, the password for that user is not accepted. I also tried to login with the Windows administrator user and with the SBO manager user, but no success with any attempt.
I also tried to add a static parameter and add all database values to the list. Same screen, different result:
Crystal Reports 2008 wrote:
Logon Failed.
Error in File UNKNOWN.RPT:
Unable to connect: incorrect log on parameters. (rptcontrollers.dll)
(On a side note: the report is saved as report1.rpt)
Anyone else got similar issues and found a solution?Hi,
When you have fixed your crystal installation following the note posted earlier, please take a look at the [how to guide|http://service.sap.com/sapidb/011000358700000882232009E.pdf] and also at the [e-learning|http://service.sap.com/sapidb/011000358700001370262010E] about SAP Business One 8.8 and Crystal Reports.
There are so called "tokens" which you need to use instead of dynamic parameters.
Dynamic paramters don't work in SAP Business One 8.8, if they are not defined as a static paramter with token.
Best regards,
Darius -
Crystal Reports background processing for SAP Business One 8.8
Dear Partners,
I have an SDK program developed in SAP Business One SDK that works in 2007, it calls crystal reports externally and can be executed as a background task using the windows schedular or from the command prompt.
My problem is it does not work under SAP Business One SDK 2008 PL18 with SQL Server 2008, Visual Studio 2008.
I receive the following message after this line in my code,"oReport.PrintToPrinter(CopyNo, False, 0, 0)".
'CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters. ---> System.Runtime.InteropServices.COMException (0x8004100F): Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.ReportSource.EromReportSourceBase.
at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
at BGProductionRpt.ECR_Common.ECR_PrintReport(Int32 CopyNo) in C:\SDK Development\8.8\test\XX_Rpt\ECR_Common.vb:line 485'
My Question is what Crystal Reports libraries or other method should I be using ?
Crystal Reports 2008 for SAP Business One eg. 51038978.zip - downloaded from portal obviously dosn't contain the CrystalDecisions libraries.
Crystall Reports 2008 - cr2008_sp3_fullbuild, cr2008fp33.exe, cr2008fp33_mm, cr2008fp33_clickonce - also download from the portal, the cr2008_sp3_fullbuild does contain the crystal decisions libraries.
Finally other choices are crystal reports included with the visual studio 2008 and crystal reports full version direct from Business Objects.
I have tried different versions of crystal decision libraries- eg, 12.0110 or 12.02 but still no joy.
Also if I manage to get the report to fire what should the client be running eg, if they have the Crystal Reports 2008 for Business One do they also need to install the Crystal Reports Run time - cr2008fp33_clickonce.
Any help would be appreciated.
Thanks.Hi John
Since the SDK works in 2007 it will be using the OLD DB access method.
Change the Crystal report to use an OLE DB datasource rather than the SAP Business One data source.
Regards
Rob -
Wrong User name or Password while connecting from SAP Business One - PL26
I have restored my database on the server.I am using Patch Level PL26
I am getting an error while logging to Server
Wrong username and password....Message [131-93]
Is it because i have not imported the Temporary Liscence.But when i work on my laptop, it doesnt give me an error with the same username and Password.
I have checked SAP B1 Suite Service Manager also......it is "ON".
Can you please give me an help on this issues, why is it giving this error
OR
Is there a problem in my SAP Business One Server installation
Steps i have followed to install the SAP Busines One Server
1 - PL26 - Packages - Server Tools - Setup
2 - SAPB1 - Packages - Server - Setup (Custom - Demo-India
3 - Client - setup
4 - PL26 - Packages - DIAPI - Setup
Not installed -
5 - Packages - Upgrader Common - Setup
Reason - I have been told that until and unless you import liscense, you cannot run Upgrader Common Setup.
Please if you can find out is this true ?
Is the problem coming because i have not run the Upgrader Common setup ?Hi Khimesra,
Could you please try the following:
1 - Firewall/antivirus disabled
2 - B1 uninstalled
3 - Net 1.1 installed
4 - B1 reinstalled
Please also refer to the following SAP notes:
546344 and 542690
Regards
Emanuel -
Add-Ins menu not visible in Crystal report for Sap Business One
Hi,
I have installed the Crystal Report Design for Sap Business One on my customer server.
But when I open the Crystal Report I can't see the Add-Ins menu to put the rpt directly on my Sap Business One.
I have installed it on many customer, but only with this I have this type of problem.
There is some restriction on Sap Version/Patches or Authorization Users or some check that I have to set on Sap or on Crystal Report?
Regards
MarcoHi All,
i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
OS: MS Windows 7 SP1
SAP Business One 8.82 pl7
Crystal report 2011
Crystal report integration package installed under B1_SHare/Client
But still the problem persist on the workstation.
Please help me solve this problem.
Thank you,
ana -
Reuse Sales Quotation in SAP Business One Addon
I m designing an addon for SAP Business One using VB .net 2005.
I have created a menu for that Addon.
Now i want to open the existing SALES QUOTATION from a sub menu of my new ADDON Menu.
Please tell me if it is possible or not ?
If it is possible then please tell me the whole procedure how can we do that ??
Please reply as soon as possibleHello itsatish,
open a quotation with the method:
ActivateMenuItem("2049");
Then automatic fill the documentNumber and create a click-event on the searchbutton
HTH Regards Teun -
RG23A in Crystal report for SAP Business One
Hi All Experts,
Can Anyone Provide me RG23A part I And RG23A Part II in Crystal report Format For SAP Business One Database
Regards ,
Gayatri ShuklaHi All,
i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
OS: MS Windows 7 SP1
SAP Business One 8.82 pl7
Crystal report 2011
Crystal report integration package installed under B1_SHare/Client
But still the problem persist on the workstation.
Please help me solve this problem.
Thank you,
ana -
Incorrect font when print a crystal report in SAP Business One
I design a report in Business Object basic edition 2008 and work without problems with the business object application. But if I use the crystal report integration in SAP Business One screens the report print the information with a wrong font, do not use the utility font used in the report configuration. I need help in this !!!!!
Hi Roberto,
I suggest you post your question to the Business One forum.
I can't move this one.
Thank you
Don
Maybe you are looking for
-
Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer. Please he
-
How do I use assistive touch to recover my ipod touch
So I want to recover my ipod because I forgot the password and I need to put it in recovery mode, but my home button broke. And it's a 5th gen, if that matters.
-
Creation of PM measuring documents after UD in calibration
Hi All, There is a function module QFOA_QM_CHAR_TO_PM_E_POINTS (Follow-Up Action: Transfer of QM Charac. Results to PM Measuring Points) in SAP QM quality inspection configuration to create PM measuring documents automatically after the Usage decisio
-
For consistency with previous released versions of iCal: I think the default should be last selected calendar. iCal 5.0 (1535) in Mac OS X 10.7 (Build 11A511) seems to avoid that default, iCal seems to make a guess - often a wrong guess - and so begi
-
Can I save an iTunes playlist and put it on another computer?
I have an old windows PC with a GREAT playlist of 300 songs. I would really like that whole list on my Macbook, but I don't want to have to sit here like an idiot and drag and drop 300 files into a new playlist. How can I transfer my windows playlist