Error while syncing with iTunes 8.0.1

I get an error at the end while syncing, during photo uploads. It cancels out saying iPhone can't be synced. I've quit, restarted, reinstalled and nothing helps. Anyone experiencing the same?

I seem to recall error 39 is something to do with photos
http://discussions.apple.com/thread.jspa?messageID=8014304&#8014304
I might suggest first make sure you have a backup of the content of the phone by ctrl+click it under devices in iTunes and select backup.
Also make sure all your data is backed up from address book, ical, keychains, and export your bookmarks from safari just to be on the safe side.
Try just disabling photo syncing or contact syncing and see if you can isolate the issue
If you are syncing with iPhoto you may need to rebuild your library (I would back up everything first) http://support.apple.com/kb/HT2638
If it's not iPhoto try trashing the iPod Cache that is in the pictures folder.
If it is not photos you might try "reset sync history" from the iSync preferences or hunt up "Swarm of Bees" on the support site.

Similar Messages

  • Iphone 5s Blue screen error while sync with iTunes?

    While try to sync iphone 5s with iTunes, immediately getting blue screen and phone restarted. Please help.

    Forgot to add that I replaced it my self. After I replaced the back I tested the phone out before screwing the last 2 screw next to the lighting port. The phone worked then. But that was before i plugged in the Touch ID cable.

  • BB Error while sync with outlook

    Hi-
    Appreciate if you guys can help me in finding a solution!
    I am getting the following error while syncing with OutLook " error record with specific id error (FF1E892B) not found"
    I am using BB Tourch 9800!
    Rgds.

    Found out that this is a known error with no established timeframe for a fix.

  • Outlook hangs up on Send/Received Progress while sync with iTunes.

    My Microsoft Office 2007 Outlook gets hung up on "Send/Receive" Progress (Status 75%) while syncing with iTunes.
    I am syncing my iPhone 3Gs with iOS 4.3.3 with my computer.
    What is causing this?
    Thank you.

    I ended up setting the iPhone back to factory settings and then setting it up as a new iPhone rather than trying to use things from my first generation iPhone in iTunes to set up the iPhone 4s.  That worked, but the language was Finnish (I think) and it took a while to find the settings by "guessing" what the menu buttons read.

  • IPhone is lost while syncing with iTunes

    Hi there,
    for the longest time my iPhone hasnt been very friendly when syncing with iTunes.
    It often disconnects, the iPhone plays that "I'm connected" sound out of nothing, then a few seconds later iTunes hangs and displays various error messages like "can't sync the device '', there is none" or so (in German of course, sorry for my bad translation).
    Here's what Console.app tells me:
    18.06.09 20:56:42 [0x0-0xe00e].com.apple.systemuiserver[226] DigiHub:sendChargingCommandToDevice RequestExtraPower(kUSBPowerDuringWake) returned 500
    18.06.09 20:56:42 [0x0-0xe00e].com.apple.systemuiserver[226] DigiHub:sendChargingCommandToDevice sending command with sleep: 0, wake 500
    18.06.09 20:56:42 [0x0-0xe00e].com.apple.systemuiserver[226] DigiHub:sendChargingCommandToDevice sending command with sleep: 0, wake 500
    18.06.09 20:57:55 com.apple.usbmuxd[404] MuxClearPipeStall Can't clear pipe stall 2. Error: 0xe00002ed
    18.06.09 20:57:55 com.apple.usbmuxd[404] MuxClearPipeStall device is gone
    18.06.09 20:57:55 com.apple.usbmuxd[404] MuxReceivedUSBData couldn't clear pipe stall (0xe00002cd), giving up on this interface
    18.06.09 20:57:56 [0x0-0xe00e].com.apple.systemuiserver[226] DigiHub:sendChargingCommandToDevice RequestExtraPower(kUSBPowerDuringWake) returned 500
    18.06.09 20:57:56 [0x0-0xe00e].com.apple.systemuiserver[226] DigiHub:sendChargingCommandToDevice sending command with sleep: 0, wake 500
    18.06.09 20:57:57 com.apple.usbmuxd[404] HandleUSBMuxConnect Client 0x10c0f0 (iTunes/com.apple.iTunes) requesting attach to 0x1:32498 failed, no such device
    18.06.09 20:57:57 com.apple.usbmuxd[404] HandleUSBMuxConnect Client 0x10c0f0 (iTunes/com.apple.iTunes) requesting attach to 0x1:32498 failed, no such device
    18.06.09 20:57:58 com.apple.usbmuxd[404] HandleUSBMuxConnect Client 0x10af80 (iTunes/com.apple.iTunes) requesting attach to 0x1:32498 failed, no such device
    18.06.09 20:57:58 com.apple.usbmuxd[404] HandleUSBMuxConnect Client 0x10c0f0 (iTunes/com.apple.iTunes) requesting attach to 0x1:32498 failed, no such device
    18.06.09 20:57:58 com.apple.usbmuxd[404] HandleUSBMuxConnect Client 0x10c0f0 (iTunes/com.apple.iTunes) requesting attach to 0x1:32498 failed, no such device
    18.06.09 20:58:13 com.apple.usbmuxd[404] MuxClearPipeStall Can't clear pipe stall 2. Error: 0xe00002ed
    18.06.09 20:57:57 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: receive_message: Could not receive size of message: 0 Unknown error: 0
    18.06.09 20:57:57 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: connect_toport: Could not connect to USB mux port 32498 for device 1: Device not configured
    18.06.09 20:57:58 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: connect_toport: Could not connect to USB mux port 32498 for device 1: Device not configured
    18.06.09 20:57:58 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: connect_toport: Could not connect to USB mux port 32498 for device 1: Device not configured
    18.06.09 20:57:59 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: send_message: Could not send message size: Bad file descriptor
    18.06.09 20:58:13 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: lockssl_handshake: SSL handshake controlled failure 0: SSLERRORSYSCALL (Early EOF reached)
    18.06.09 20:58:13 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: AMDeviceStartSession: Could not start session: kAMDInvalidPairRecordError
    18.06.09 20:58:13 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: sendmessage: Could not send message size 342: Broken pipe
    18.06.09 20:58:13 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[460] 460:2684798752|DeviceLinkListener.c:_setMobileDeviceValue| ERROR: Could not start session with device: InvalidPairRecord (92)
    18.06.09 20:58:13 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[460] 460:2684798752|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFDictionary 0x1fa150 [0xa05101a0]>{type = mutable, count = 2, capacity = 3, pairs = (
    1 : <CFString 0x130fb0 [0xa05101a0]>{contents = "DisableTethered"} = <CFBoolean 0xa05103f8 [0xa05101a0]>{value = false}
    2 : <CFString 0x1fa1e0 [0xa05101a0]>{contents = "SyncingOS"} = <CFString 0x133e8 [0xa05101a0]>{contents = "OSX"}
    )}) in lockdown for com.apple.Contacts (Contacts): -402653092
    18.06.09 20:58:17 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[460] 460:2684798752|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3c335fe6df52bd23e4723e99731ad5602fe67640. Assuming there are no disabled data classes.
    18.06.09 20:58:17 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[460] 460:2684798752|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3c335fe6df52bd23e4723e99731ad5602fe67640. Assuming there are no disabled data classes.
    18.06.09 20:58:21 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[460] 460:2684798752|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3c335fe6df52bd23e4723e99731ad5602fe67640. Assuming there are no disabled data classes.
    18.06.09 20:58:25 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[460] 460:2684798752|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3c335fe6df52bd23e4723e99731ad5602fe67640. Assuming there are no disabled data classes.
    18.06.09 20:58:25 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[460] 460:2684798752|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3c335fe6df52bd23e4723e99731ad5602fe67640. Assuming there are no disabled data classes.
    18.06.09 20:58:29 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[460] 460:2684798752|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3c335fe6df52bd23e4723e99731ad5602fe67640. Assuming there are no disabled data classes.
    18.06.09 20:58:29 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: disable_sigpipe: Could not disable SIGPIPE on socket
    18.06.09 20:58:29 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: disable_sigpipe: Could not disable SIGPIPE on socket
    18.06.09 20:58:29 com.apple.usbmuxd[404] HandleUSBMuxConnect Client 0x10ae00 (iTunes/com.apple.iTunes) requesting attach to 0x2:32498 failed, no such device
    18.06.09 20:58:29 com.apple.usbmuxd[404] HandleUSBMuxConnect Client 0x10ae00 (iTunes/com.apple.iTunes) requesting attach to 0x2:32498 failed, no such device
    18.06.09 20:58:29 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: connect_toport: Could not connect to USB mux port 32498 for device 2: Device not configured
    18.06.09 20:58:29 [0x0-0x25025].com.apple.iTunes[457] MobileDevice: receive_message: Could not receive size of message: 0 No such file or directory
    18.06.09 20:58:34 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/Resources/MDCrashReportTool[473] 473:2684798752|IPodCrashReportTool.m:_cancelCopySubmitCrashReports| ERROR: No crash report copier running for target 3c335fe6df52bd23e4723e99731ad5602fe67640
    18.06.09 20:58:34 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/Resources/MDCrashReportTool[473] 473:2684798752|IPodCrashReportTool.m:_cancelCopySubmitCrashReports| ERROR: No crash report copier running for target 3c335fe6df52bd23e4723e99731ad5602fe67640
    18.06.09 20:58:34 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/Resources/MDCrashReportTool[473] 473:2684798752|CrashReportCopierPrivate.m:-[CrashReportCopierPrivate device]| ERROR: Could not find a device with UID 3c335fe6df52bd23e4723e99731ad5602fe67640
    18.06.09 20:58:34 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/Resources/MDCrashReportTool[473] 473:2684798752|CrashReportCopierPrivate.m:-[CrashReportCopierPrivate device]| ERROR: Could not find a device with UID 3c335fe6df52bd23e4723e99731ad5602fe67640
    18.06.09 20:58:37 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/Resources/MDCrashReportTool[473] 473:2684798752|CrashReportCopierPrivate.m:-[CrashReportCopierPrivate device]| ERROR: Could not find a device with UID 3c335fe6df52bd23e4723e99731ad5602fe67640
    (note: the items after 20:58:17 are after I physically disconnected the iPhone)
    This has long been a problem for me (since I had it), I've been re-installing iTunes for several times - it only got better once when I had 8.1 fresh reinstalled, but that's history now since there's iOS 3.0 and iTunes 8.2.
    I've also checked this post: http://discussions.apple.com/thread.jspa?threadID=1988855&start=0&tstart=0
    The error messages are not quite the same, it also didn't fix my problem. Have removed all stuff from MobileDeviceService and MobileDevice.framework and so on rebooted afterwards, reinstalled iTunes 8.2 - nothing helps - it only keeps getting worse.
    What can I do to make my iPhone sync again!?
    Thanks in advance,
    mat.i.am

    Plugged phone in this morning and Console shows the following messages:
    7/10/09 7:54:52 AM com.apple.usbmuxd[31] MuxClearPipeStall Can't clear pipe stall 2. Error: 0xe00002ed
    7/10/09 7:54:52 AM com.apple.usbmuxd[31] MuxTCPSendRST MuxInterfaceSend failed: 0xffffffff
    7/10/09 7:54:52 AM /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[290] 290:2692392736|DeviceLinkListener.c:_setMobileDeviceValue| ERROR: Could not start session with device: InvalidPairRecord (92)
    7/10/09 7:54:52 AM /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[290] 290:2692392736|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFDictionary 0x30eac0 [0xa03361a0]>{type = mutable, count = 2, capacity = 3, pairs = (
    1 : <CFString 0x30eaa0 [0xa03361a0]>{contents = "DisableTethered"} = <CFNumber 0x10f000 [0xa03361a0]>{value = +1, type = kCFNumberSInt32Type}
    2 : <CFString 0x126720 [0xa03361a0]>{contents = "SyncingOS"} = <CFString 0x133d8 [0xa03361a0]>{contents = "iPhone"}
    )}) in lockdown for com.apple.Bookmarks (Bookmarks): -402653092
    7/10/09 7:54:52 AM /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[290] 290:2692392736|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFDictionary 0x30eac0 [0xa03361a0]>{type = mutable, count = 2, capacity = 3, pairs = (
    1 : <CFString 0x30eaa0 [0xa03361a0]>{contents = "DisableTethered"} = <CFNumber 0x10f000 [0xa03361a0]>{value = +1, type = kCFNumberSInt32Type}
    2 : <CFString 0x126720 [0xa03361a0]>{contents = "SyncingOS"} = <CFString 0x133d8 [0xa03361a0]>{contents = "iPhone"}
    )}) in lockdown for com.apple.Bookmarks (Bookmarks): -402653092
    7/10/09 7:54:54 AM /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[290] 290:2692392736|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3411946e713a2b2e0ac342d8faa77da5d4c7da0a. Assuming there are no disabled data classes.
    7/10/09 7:54:54 AM /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[290] 290:2692392736|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3411946e713a2b2e0ac342d8faa77da5d4c7da0a. Assuming there are no disabled data classes.
    7/10/09 7:54:56 AM /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper[290] 290:2692392736|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarget| ERROR: Could not find a device with the target identifier 3411946e713a2b2e0ac342d8faa77da5d4c7da0a. Assuming there are no disabled data classes.
    7/10/09 7:54:52 AM [0x0-0x20020].com.apple.iTunes[284] MobileDevice: lockssl_handshake: SSL handshake controlled failure 0: SSLERRORSYSCALL (Early EOF reached)
    7/10/09 7:54:52 AM [0x0-0x20020].com.apple.iTunes[284] MobileDevice: send_message: Could not send message size: Broken pipe

  • No Disk error when syncing with iTunes

    Whenever I sync my iPod Classic with iTunes, I get an error message saying "there is no disk in drive, please insert disk into drive E: (my dvd drive)". The sync succeeds, but I need to dismiss the message a few times. Has anyone seen this and know how to stop it?
    Screenshot of error message: http://img177.imageshack.us/img177/2650/ituneserrorjo5.jpg

    I have the same problem. Did you ever find a fix?

  • -1303 error when syncing with Itunes

    Hi, I am getting an -1303 unknown error whenever I try to sync my ipod mini with my PC with ITunes software. Sometimes it updates everything and then crashes or it doesn't update and just crashes.

    There are known issue with 64bit Win 7 and syncing...the best fix is to update the BIOS of the machine you're on and that helped most issues...highest issue reported was for people using a Gigabyte Motherboard and Win 7...
    That's why it works on 32bit Win 7...something in the MB that communicates with synced devices doesn't like iPhone and the BIOS update is needed to address this until Microsoft releases a cover all fix.

  • Multiple copies while syncing with itunes

    while syncing, five copies of 767 songs by one artist are on the ipod. Wondering how to eliminate this. tried clearing the ipod and reinstalling all music. didnt work. suggestions are welcome.

    I Think I found the fix. I had to set my IPod to Disk Mode and reboot my PC. It actually syncs now, but I am still having some issues with some songs flagged when the sync process is complete. They appear on the playlist but do not play. I searched for the songs thru windows explore and the files are not there. My guess is that ITunes just does not copy them for what ever reason and moves on to the next song in the list. The temporary fix I am using is that I tell it to only sync those songs that are checked. If a song is flagged I uncheck it from the list, sync the ipod and then re-check it and sync again. Though it is tedious I have made it copy the songs it did not copy over in the first try.

  • Sync Services error while Syncing with Mac & Entourage 2004

    Hello All,
    I got an error '.Mac Sync Error' screen while syncing from Entourage 2004, v11.3.3 for Mac. OS X 10.4.10. Some data did sync, but the entries that did not are apparently untraceable. It said, "You can't modify a record that doesn't exist."
    I tried wiping the old Addressbook on the Mac side to eliminate any corrupt
    data. The first sync with Entourage and subsequent sync gives the same
    error. Funny but my iPhone syncs great with Addressbook and doesn't give a
    similar error. It may be that this error is on iCal instead. How do I find the error from the number given?
    I checked the database in Entourage with Database Utility and no errors were
    found. I also backed up the database and compacted it just so I'd have a
    copy.
    The database does somehow get duplicate information to Addressbook with
    subsequent syncs which end up duplicating entries on both Addressbook and
    Entourage. iCal seems reliable but I don't know...
    Henry
    (Also posted in Newsgroup:microsoft.public.office.mac.entourage)

    The push descriptor indicates that your machine is trying to push—or, send—data to an Unfiled calendar that does not exist elsewhere. 'Elsewhere' could be in the truth database on that machine, at .Mac or on another synchronized machine.
    It's clearly not on your local machine in iCal anymore. If you reset the truth database by using the Reset Sync History… option in iCal, it should no longer be present on .Mac, if you subsequently synchronized. If you opted instead to Reset Sync Data and pushed records from .Mac to your machine, it is likely that it once again resides in your copy of iCal. If you opted to Reset Sync Data and pushed records from .Mac to your machine, it will not be present in iCal.
    The most reasonable explanation, given what you have described and the error dialog you printed, is that this Unfiled Calendar exists on another synchronized Macintosh. If that is the case, you must also delete it from the copy of iCal on that machine.
    If you don't have another synchronized machine in your pool, I can give you a terminal command that will completely obliterate your truth database and require that you start all over again, reregistering all of your clients—including Entourage—and starting all over.
    You should, by the way, disable Entourage synchronization to isolate it and temporarily simplify your synchronization pool, until you have resolved this issue. Do not simply delete the Entourage calendar from iCal, for that will result in the deletion of matching records in Entourage itself during the next synchronization event.

  • IPhone and iPad error when syncing with itunes

    iTunes cannot sync my iPhone 4 or iPad air, iPhone produces unknown error (-50), and iPad produces unknown error (-54), cannot sync. This problem started in the past seven days. Neither device is Jailbroken, so I know that's not a cause, any help?

    I was having this problem and there isn't a lot out there about it. But it seems to have gone away with iOS 7.1, which is nice.

  • Ipod ejects while syncing with ITunes

    Every time I plug in my IPod to my computer it says it's syncing and I can see it coping files over but after a while my open screen changes from "Do Not Disconnect" to the Regular IPod Main Menu screen and then eventually it goes into sleep mode and continues to charge or just let me know it's charged.
    Does anyone know what could be causing this?

    I Think I found the fix. I had to set my IPod to Disk Mode and reboot my PC. It actually syncs now, but I am still having some issues with some songs flagged when the sync process is complete. They appear on the playlist but do not play. I searched for the songs thru windows explore and the files are not there. My guess is that ITunes just does not copy them for what ever reason and moves on to the next song in the list. The temporary fix I am using is that I tell it to only sync those songs that are checked. If a song is flagged I uncheck it from the list, sync the ipod and then re-check it and sync again. Though it is tedious I have made it copy the songs it did not copy over in the first try.

  • Error when syncing with iTunes and Windows 7 64Bit(AMD)

    I keep getting this error:
    Attempting to copy to the disk " Your Name Here's IPhone" failed. The Device timed out...
    It works fine on my Netbook ( Wind 7 32 Bit)
    I am sure someone has this issue...
    I tried running in XP mode, Shut off my Pass lock, Uninstall and reinstall Drivers, Using USB2.0...
    Any thoughts on this ( and I do not want to hear Use your netbook) LOL
    Thanks
    mike

    There are known issue with 64bit Win 7 and syncing...the best fix is to update the BIOS of the machine you're on and that helped most issues...highest issue reported was for people using a Gigabyte Motherboard and Win 7...
    That's why it works on 32bit Win 7...something in the MB that communicates with synced devices doesn't like iPhone and the BIOS update is needed to address this until Microsoft releases a cover all fix.

  • SM: Error while sync with SCE [Quarantine mode]

    [SCE 8000]
    System version: Version 3.6.5 Build 489).
    [SM]
    ./p3sm --version
    3.6.5 Build 300
    [Problem desc]
    I have 2 SCEs, not in cascade mode.
    SCE S132SCE8000T2  gone to quarantine mood and can't auto-recover.
    ./p3log -> log.txt says (attached):
    2011-06-01 13:24:00 | ERROR | SM    | SCE S132SCE8000T2 has been put in quarantine for the next 7680 seconds - Failed to perform logon operation
    I moved SCE back to normal operation using ./p3net --connect --ne-name=S132SCE8000T2 and quarantine reset.
    Now situation as follows:
    Synchronization Status: Not-done(100% failures) for S132SCE8000T2.
    I try to use ./p3subs --resync --ne-name  with no effect:
    >./p3sm --resync --ne-name=S132SCE8000T2
    Error - Failed to synchronize S132SCE8000T2
    S132SCE8000T2 is not active
    How can I resolve the problem and why the failure occured?
    >
    >
    >./p3net --show-all --detail
    ==============================================================================
    | Name             | Host             | Conn-    | Sync-    | Domain          |
    |                  |                  | Status   | Status   |                 |
    ===============================================================================
    | S132SCE8000T1    | 172.24.7.17      | up       | done     | subscribers     |
    | S132SCE8000T2    | 172.24.7.20      | up       | not-done | subscribers     |
    Command terminated successfully
    >./p3net --show --ne-name=S132SCE8000T2
    Network Element Information:
    ============================
    Name:        S132SCE8000T2
    Host:        172.24.7.20
    Ip:          172.24.7.20
    Port:        14374
    Status:      Connection ready
    Type:        SCE8000
    Domain:      subscribers
    Synchronization Status: Not-done(100% failures)
    Redundancy Status: Standalone
    Quarantine Status: ok
    Command terminated successfully
    >./p3net --show --ne-name=S132SCE8000T1
    Network Element Information:
    ============================
    Name:        S132SCE8000T1
    Host:        172.24.7.17
    Ip:          172.24.7.17
    Port:        14374
    Status:      Connection ready
    Type:        SCE8000
    Domain:      subscribers
    Synchronization Status: done
    Redundancy Status: Standalone
    Quarantine Status: ok
    Command terminated successfully

    Hello,
    For this one, I think you will need to open a service request with TAC.
    I would look at the umlog on the SCE and the SM, as well as the dbglog.txt from the SCE.
    These can be found in the support files:
    SCE#logger get support-file ftp://user:[email protected]/./support-file.zip
    ~pcube/sm/server/bin//p3sm --extract-support-file -o SM-Support.zip
    Also, run a tcpdump on the SM when trying to resync and look for anomalies in the connection.  Look also for the CPU usage on the SCE.
    Regards,
    Tom Debruyne

  • TS4062 itunes stops working while syncing with ipad

    Itunes progam closes while syncing with itunes.
    Please advise

    This is happening to me too.., updated to latest Itunes/McCloud etc directly beforehand.  Tried to sync ipad.., keeps saying ITunes has stopped working (I have W7 Ultimate too).
    I can see several slightly different ways of resolving this (most seem to involve completely uninstalling ITunes, Quicktime etc.) but a bit confused as to which one is the best way.  I don't expect to pay the money I have for an IPAD and then not be able to do the simplest thing with it (synch pc with Ipad) lol.., and have to spend hours trying to install and completely install different apps.
    Could someone please have mercy on me and let me know which way works?

  • My Ipod doesn't want to sync with itunes showing error (-48)

    My Ipod doesn't want to sync with itunes showing error (-48).. What can I do cause I can't add songs to the ipod....

    If you have not already, shut down your computer.  Do this to reset your iPod
    http://support.apple.com/kb/HT1320
    Start up your computer.  Run iTunes.  Connect iPod.  Try to sync again.

Maybe you are looking for

  • Can I use Final Cut Studio 2 on the latest macbook pro retina display?

    I'm planning on buying the 15" macbook pro retina display and was given Final cut studio 2 from a friend as he woudn`t use it. is it possible to install this program on the computer at all and successfully use it or can i upgrade to the newest versio

  • Sales order creation error

    Hello Everyone, I am getting this error while creating a sales order : Please analyse and let me know the solution: Material 302309 is not defined for sales org.5000,  distr.chan.06,  language  EN                                                      

  • I now have two laptops.  I cannot get #2 to get my music

    I have two laptops - #1 and #2.  #2 isn't that old.  I have been syncing to #1 which has worked out great.  I am trying to get my iTunes music and apps to #2 so I can do all my syncing from it instead but I can't get the music over.  I can only have

  • Qosmio G50-12F won't turn on

    I got a Qosmio G50-12f n : PQG55E-04C02YFR The problem is: when I plug on the dc power I got a white light on the dc plug picture and a orange light on the battery picture. When I want to power on the laptop, the white light turn off 1 second (maybe)

  • Why does photo shop 9 shutdown with "request runtime to terminate" message?

    How can I correct when my Photoshop 9 shutdowns with "request for Runtime to terminate in an unusual way" message?