Error while testing sender SOAP scenario from XMLSpy-but can test from RWB

HI,
I developed one scenario with sender SOAP adapter and Receiver side ABAP proxy.
Now I want to test my scenario.
I tested my scenario  successfully from RWB-->Integration server Integration Engine. ( it posted successfully and I can see checked flag in SXMB_MONI)
But when I tried to test the scenario fro XML spy it is throwing HTTP error 500.
When I type my URL in internet explores it is giving “Message Servlet is in Status OK”.
I am not sure what is the difference between there two type of testing.
What does it mean by successful from RWB and fails from XMLSpy?
Why I am getting this error from XMLSpy?

Dear Ashok,
if RWB showing you successful then message in not in error.
XML Spy giving error HTTP 500 not it is just server error.This might be due to large payload.
here is the description of all error related with 500+
5xx Server Error
The server failed to fulfill an apparently valid request.
Response status codes beginning with the digit "5" indicate cases in which the server is aware that it has erred or is incapable of performing the request. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. User agents SHOULD display any included entity to the user. These response codes are applicable to any request method.
500 Internal Server Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
504 Gateway Timeout
505 HTTP Version Not Supported
506 Variant Also Negotiates (RFC 2295)
507 Insufficient Storage (WebDAV) (RFC 4918)
509 Bandwidth Limit Exceeded
This status code, while used by many servers, is not an official HTTP status code.
510 Not Extended (RFC 2774)
first ping your server
Tcode for this is SM49>ping
Then in additional parameter put the server IP and execute it will show you its reachability.
if it is not reachable then contact the server vendor,
Else if it is timeout problemthen
you run Tcode SXMB_ADM>intregration engine configuration
put category RUNTIME
then click specific configuration
Then change/increase HTTP timeout
**PS: Reward points if useful**
Regards,
Sumit Gupta

Similar Messages

  • Testing XI SOAP scenario via XMLSpy

    I've completed the following -
    1. Created the scenario SOAP => XI => RFC
    2. Using XI config, generated WSDL specifying the Message Interface which triggers the scenario in XI.
    http://<serverhost>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<ServiceName>:<Channel Name>
    3. Transported this WSDL to local directory
    4. Testing WebService by sending a SOAP message using XMLSpy. Option Soap=>Send request to Server.
    I don't see any pop-up to enter xiappluser and password .
    I get the following popup error message
    HTTP error: could not POST file
    '/XISOAPAdapter/MessageServlet?channel=:HTTP_LINK:testSoap&amp;version=3.0&amp;
    Sender.Service=HTTP_LINK&amp;Interface=urn%3Agoodyear.com%3AInfoLinkToSAP%5EInfoLink_XML_Req_Sync_Abs' on server 'xi0.goodyear.com' (404).
    Please let me know if there is anyway to resolve this error condition.
    Thank you.

    Hi Prasad, thank you.
      Niall Guerin wrote me a message in which he explained that some of my XI components are inconsistently patched. I will verify and correct that.
      Thanks again.
      Ivan
    <i>Hi Ivan,
    Thanks for the patch level information above. Your components are not
    up to date.
    As you can see the following XI AFW components are inconsistently
    patched:
    sap.com SAP-XIAFC 3.0 SP12
    sap.com SAP_XIAF 3.0 SP17
    ALL XI components MUST be on the same patch level. This means:
    XIAFC, XIAF, and XITOOLS must all be on SP17. The same goes for the
    ABAP stack. Basis must be on SP17 and so must your J2EE Engine. With
    XI, ALL patch levels must be consistent as a prerequisite. Please
    refer to attached note: 750511.
    In addition, it looks like you've got a PCK deployed on the XI host
    as well? A PCK cannot co-exist with an XI installation, so please
    ensure you did not do this and undeploy it if it was installed on top
    of the XI host.
    Please patch the XI Java components correctly and then reproduce the
    SOAP Adapter problem after sending a soap request to the adapter.
    For more information on the message status in your screenshot, refer
    to the weblink below. This is an enhancement with SPS17 for the Runtime
    Workbench:
    Communication Channel Monitor
    http://help.sap.com/saphelp_nw04/helpdata/en/44/2a1a8620323f0ee10000000a114a6b/content.htm
    Kind Regards,
    Niall Guerin</i>

  • How do I test Sender SOAP scenario?

    Hi
    Soap - IDOC.
    The authorizations on the WS to send data is not yet provided to me.
    thus, I m trying to send a sample data from Altova XML spy.
    For this purpose I have created a WSDL from ID (Tools -> create WS)
    in Receiver NS, receiver MI, I have given receiver side details only
    but in sender side NS and MI and Sender service, I have given the Sender service that I have created in ID and the XI's local NS and receiver MI
    For URL, I have selected on "Propose URL". Now will I be able to send data to the R3 server with this link?
    (R3 is production server in my network)
    now with that WSDL, I coudlnt validate in XML SPY.
    have I provided the correct details?
    Please suggest me is there any other way of testing Sender WS to IDOC?
    Thanks and Regards,
    Venkat.

    oops I guess I have confused u
    let me detail it again
    Scenario : SOAP - XI - IDOC
    The scenario is finished.
    I dont have authorizations on WS to logon n send the data
    Thus, I have created WSDL from ID (in XI)
    now I want to send data to XI which inturn will post the data to R3 and create a IDOC
    when I try to validate the WSDL created through XI using SPY, it couldnt validate and I couldnt send the request
    I want to send the data from outside XI and I want to generate a IDOC with the test data I have specified.
    how do I do it?
    Hope I made it clear this time
    Thanks,
    Nikhil.

  • Can't send texts to one person but can receive from them

    I am having problems sending text messages to a single number, which is also on Verizon, although I can receive texts from that number just fine. When I try to send to them, or respond to the ones I get from them, it shows up as sent on my phone like everything is fine. The other person never gets the message though.
    I have checked and they are not blocked. I can make and receive calls to this person and I can receive texts from them. It's just I can not send texts to them although my phone says they are sent.
    So far it's only this one phone number that is affected. I can text my other contacts just fine.
    I have tried taking out the battery. I tried calling *228 and my phone just says "Call not sent". I'm on a Galaxy Nexus.
    Any other ideas that I can try myself or am I down to having to go stop in a store and see what they can do about it?

    I tried adding a 1 before the area code but I have yet to get a response but I'm at work right now so I will call and check if the person got it when I go out for lunch. I will update on whether or not that worked.
    I doubt the person blocked me for multiple reasons. 1 - I live with them, we get along great and we normally text each other daily while at work. 2 - I have had someone on my account block a friend of mine before as a joke and when that person was blocked and tried to text me it told them it couldn't send. It didn't just say sent and never make it. And as I said, this person is also on Verizon so I assume it would work the same if they blocked someone.

  • HT5622 iPad 3 and my sound has stopped from speakers, but can get from headphones.  It's not the side switch and the volume is max in all areas.  Anyone got any ideas, what problem is and how to fix it thanks

    Hi,
    My iPad has just stopped working with sound from the speakers, it works fine with the headphones in.  The soft mute button is not made and the volume is at max.
    Any ideas what problem is and how to sort.  Thanks

    System sounds can be muted from the software switch in the task bar as well as from the side switch depending on how you have it set up. This my boilerplate resonse for sound issues.
    1. If you have no sound at all, even in the Music App, try rebooting the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

  • Cant print from my usb HP 1050 printer can print a test page but nothing from pages, desktop  can print from iPhoto's, reset printer. reinstalled printer, this is with the latest 10.9.3, can't prnt all via network to a brother 3045cn?

    Tried all the printer uninstalled and re enstalled,, i can print test page but nothing from Pages , Or any text  from desk top, can print from iphoto's.
    Can print via Network to a Brother HL-3045cn from Pages and all Text, the Hp Prniter was working till i upgraded to 10.9.3?

    Reset your printing system, as per > OS X Mavericks: Reset the printing system

  • I can't no longer access Itunes.  Keep getting error message 127.  I tried uninstalling Itunes, but can't.  So frustrated.  Please help.

    I can't no longer access Itunes.  Keep getting error message 127.  I tried uninstalling Itunes, but can't.  So frustrated.  Please help.

    First, if you've moved the iPhoto library to an external drive, make sure that drive is mounted by opening it in the Finder.
    The issue can be caused by sharing the photo library on a network (against Apple's advice) or by opening it in more than one local user account at the same time. You may be able to clear the error by logging out or restarting the computer. If not, do as follows.
    Quit iPhoto if it's running, locally or on any file-sharing client. Select the iPhoto Library in the Finder. Usually it's in the Pictures folder, but you may have moved it somewhere else. Right-click or control-click the library icon and select
              Show Package Contents
    from the popup menu. In the folder that opens, navigate to
    Database/apdb/lockfile.pid
    and move that file, if it exists, to the Trash. Close the Finder window.
    Credit for this observation to ASC member Elijahg.

  • I am trying to download photoshop presets from online but can't seem to figure out how to open them in photoshop. They download sucessfuly and then goes to my download folder on my computer, from there I double click on the file and photoshop opens and th

    I am trying to download photoshop presets from online but can't seem to figure out how to open them in photoshop. They download sucessfuly and then goes to my download folder on my computer, from there I double click on the file and photoshop opens and then nothing happens, any ideas? I am using a PC

    This video is a great step by step tutorial.
    Photoshop: How to Download & Install New Brushes & other Presets - YouTube
    Gene

  • Hi, i've a iphone 5s and i wanted to know that I bought my iphone from india but it came from usa but i have an indian bill will it be covered in warranty, like if i go to the apple service centre?

    Hi, i've a iphone 5s and i wanted to know that I bought my iphone from india but it came from usa but i have an indian bill will it be covered in warranty, like if i go to the apple service centre?

    If it was originally sold in the U.S, then the warranty is only good in the U.S

  • Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

    Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

    In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

  • Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?

    Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?  I use HP wireless printer .

    Are you sure you have the right printer?
    In UNIX/OSX printers are virtual links to devices and even with the same name can be trying to reach a printer via another network address, so it thinks it is another printer.
    Peter

  • I just installed a new Lynksys router and now can not print from iPad but can from iPhone

    i just install a new Lynksys router now i can't print from iPad but can from iPhone.  with iPad can't find printer.  if i reinstall printer on the router it will print 1-3 times then can't find printer but i can print from iPhone

    What model, version Linksys router? Is the firmware up-to-date?
    What iOS levels are you running on iPad, iPhone?
    What make, model printer are you using? Is the firmware up-to-date?

  • Hello, trying to download the latest iTunes software version, a pop up comes with a "invalid signature" message. Try to do download only with the same results. I can buy and download from iTunes but can't  get the latest version?

    Hello, trying to download the latest iTunes software version, a pop up comes with a "invalid signature" message. Try to do download only with the same results. I can buy and download from iTunes but can't  get the latest version?

    Transfer Purchases  = iTunes > File > Transfer Purchases
    http://support.apple.com/kb/HT1848

  • Cant send SMS off iphone 4s but can send imessages and calls in and out still work.. help?

    cant send SMS off iphone 4s but can send imessages and calls in and out still work.. help?

    SMS is a carrier feature.  Contact your carrier

  • I have recently purchase a iphone4 from market but its lock from at

    I have recently purchase a iphone4 from market but its lock from at&t can I unlock the same because its useless for me and also my money also waste for the same
    i can got unlock code from apple if its
    Chargeable so I am ready to pay

    Only the carrier can unlock it.  AT&T will not unlock an iPhone.  You need to return your iPhone and buy an unlocked one.

Maybe you are looking for

  • Data Extraction issue from the data source 2LIS_08TRTLP

    Hi All,         We are facing one issue in time of extraction from data source 2LIS_08TRTLP(Shipment Delivery Item Data per Stage) in BW. For some out bound delivery no. Gross weight(BRGEW) is coming zero though there is value showing in the source s

  • Prompted to Open or Save a pdf File

    Does any one know how this Works: What is the security difference between having Acrobat opening a PDF from a webpage inside the browser and opening in the Acrobat program. I ask because when i have Acrobat opening PDF's inside the browser it does no

  • Why, when i try to log in to ebay, it asks to enable cookies and they are already enabled in the preferences menu in safari 5.1.2?

    running the latest version of safari. the cookies are enabled in the preferences and firefox works fine.

  • An RPC-style message

    please see this ... An RPC-style message has the XML payload wrapped inside an operation element in a SOAP body what does payload means here ? In English payload means +(1) the passengers and goods on a ship or an aircraft for which payment is receiv

  • Problem in redirect( JSF) onTomcat

    Hi All, I am trying to run a JSF application on Tomcat 5.0.25 , which is already working fine on Websphere. The application uses frames and I am redirecting to a JSF page from a Servlet : Code: response.sendRedirect(url); return; I am getting a java.