Error while TO creation LT10 - Putaway quantity not zero

Hi All,
I am trying to create a Transfer order via LT10 (or via LQ02) where the available stock is available. The error log that I see says - "Putaway quantity not zero", Message no. L1605.
The stock Scenarion is like below:
Total stock                   15
Avail.stock                   15
Stock for put.                40
Pick quantity                  0
What I understand for any stock transfer to happen there should be Available Stock. Now I want to use this 15 qty for further processing by using transaction LT10 or may be LQ02. Why does standard SAP not allow this?
If I do the stock transfer via LT01 for above scenario it does allow us to use the available stock.
The error is coming from below code of program RLS10034
*........Quants mit einzulagernden Mengen nicht markierbar!............
  if itab-einme ne 0.
    itab-ikone = sym_locked.
    itab-msgid = 'L1'.
    itab-msgno = '605'.
    itab-msgty = 'E'.
  endif.
Pls advice why the check is there in place when it could have been avoided and how to remove this check?
Thanks,
Ravi Sabhachandani

yes you are right there is a check and with standard SAP that is not possible you need to look for alternate method.Never came across this type of scenario in past however my suggestion is to have a look on the below function module and user exit that might be helpful
L_TO_CREATE_POSTING_CHANGE
MWMTOAU3 for posting change notices
Even if you are able to mange this with some custom code I see a operation issue there
LQ02 is help to the change the stock from one stock type to another (or quant characteristic) as per your test data if I will transfer the 15 pc from unrestricted to Quality and later on the transfer order of 40 get's confirmed (which is having the unrested stock) in the same  bin (this depend on the configuration of mixing) how the worker will come to know which is quality reject or which is unrested by looking physically
Total stock                   15
Avail.stock                   15
Stock for put.                40
Pick quantity                  0

Similar Messages

  • LQ02 (RLLQ0200) Putaway quantity not zero

    Scenario:
    o Two KANBAN control cycles (WM Replenishment Strategy) for a material
    o u201CCombine posting changesu201D-set in the customizing (Stor. Location Control in Warehouse Mgmt)
    o Stock determination active / IM-311 mvtype used for WM-KANBAN-replenishement
    o Both KANBAN control cycles set to u201Cemptyu201D such that two transfer orders (dest stor. type 150 KANBAN) created
    o One of the transfer order is confirmed
    o Available material on stock is K consignment (special stock type)
    Problem
    It is not possible to execute the WM903/IM411K-posting via LQ02 if there are two transfer orders and only one of the transfer order is confirmed.
    Error message u201CPutaway quantity not zerou201D (status icon locked within LQ02)
    The system allows the WM903/IM411K-posting via LQ02 only after both transfer orders are confirmed.
    LQ01 is able to execute the posting change (related to the confirmed KANBAN TO) with IM-311-K mvtype. But I don`t want to have consignment stock in the IM-destination storage location therefore the WM903/IM411-K-posting needs to be done before the 311-IM-posting.
    Thank you in advance!

    yes you are right there is a check and with standard SAP that is not possible you need to look for alternate method.Never came across this type of scenario in past however my suggestion is to have a look on the below function module and user exit that might be helpful
    L_TO_CREATE_POSTING_CHANGE
    MWMTOAU3 for posting change notices
    Even if you are able to mange this with some custom code I see a operation issue there
    LQ02 is help to the change the stock from one stock type to another (or quant characteristic) as per your test data if I will transfer the 15 pc from unrestricted to Quality and later on the transfer order of 40 get's confirmed (which is having the unrested stock) in the same  bin (this depend on the configuration of mixing) how the worker will come to know which is quality reject or which is unrested by looking physically
    Total stock                   15
    Avail.stock                   15
    Stock for put.                40
    Pick quantity                  0

  • Error while delivery creation

    hi,
      i am getting an error while delivery creation for qty 2.The error is "Only 0 EA of material xxxx available".
    The schedule line cat in this case is cp and avalibility check is carried out and confirmed qty is given on some date ahead.
    User then runs the MRP and PR is created .
    Then the user creates a PO but not with ref to the PR created from above,instead the user creates a SO assigned PO and then creates GR which is SO assigned.
    Now when the user is trying to create delivery the erroe is "Only 0 EA of material xxxx available".
    Pl tell me why am i getting this error inspite of having the qty against the SO?
    Is it because a PR is generated from the MRP run for tht order and we have no GR agaist tht PR?Where do u i check this setting

    Hi,
    In SAP there is no stock available for that material. That is the reason it is showing that message..
    Please check MMBE t.code  stock overview for that material. I  think sales order scheduleline date is showing some other date.becuase today there is no stock so u will be not able to create any delvery. So please create delivery only on confirmed schdulines date....
    Other wise do stock posting and then do availability check then try to create delivery...
    Regards
    sankar
    Edited by: sankar sankar on Jul 1, 2008 1:10 PM

  • Facing error while invoice creation in AR.

    Facing error while invoice creation in AR as Please complete your tax accounting flexfield. We are creating invoice through API.
    Regards
    Sridhar

    Hi,
    Please go through the below Note ID.
    Autoinvoice Error On Tax Codes - Please Complete Your Tax Accounting Flexfield [ID 1469285.1]
    Regards,
    Raju.

  • Error while consolidating. The operation could not be completed.

    Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
    Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
    What gives?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • Error while generating PDF in portal but not in WAD

    Hi,
    When I execute the command to export to pdf, I have a screen to fill settings of my pdf, then I valid my choice and I have this message : "Error while generating PDF" in my portal.
    However, when I want to execute on Web Application Designer and click on my command "export to pdf", I have a same screen and I can open or save my document.
    Is someone have an idea : why it is possible to generate my pdf on WAD but not in my portal ??
    Any information is much appreciated !
    Thanks in advance
    V.K.

    Hi Pradnya,
    Thanks for your answer. However it is for an old version of SAP NetWeaver..
    I work with SAP BI 7.0 version.
    Regards,
    V.K.

  • Officejet 6700 error while searching for updates: 'Printer could not connect to server'

    I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
    The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
    Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
    Thanks for any help!

    What is the IP address of the printer?  What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date? 
    I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on.  After you have both pieces of equipment back on and functioning attempt to connect to web services again.
    If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of  a browser on a computer. 
    Once that computer displays that page click on the Network tab.
    Then look in the column to the left and find the Wireless section
    Click on IPv4
    Then on that page look at the 2nd section that is labeled DNS Address configuration
    Change the radio button to the manual option
    Then for the manual preferred fill it out and make sure it reads 8.8.8.8
    Secondary should be set to 8.8.4.4
    Then hit Apply
    Read the next screen carefully. That message with the "OK" button below it  is one that states to click that button to undo the changes you  just made.  Just navigate away from that page by clicking on another tab.
    Then reattempt to connect to web services.  
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Firefox crashes whenever i want to install any addon or download any file. Some times i am receiving error while downloading any file like "could not be saved, because you cannot change the contents of that folder"

    I am the user of latest firefox 3.6.6 browser. I am getting problems of frequent crashes whenever i tries to install any addon. The crashes also occures whenever i want to download any file.
    I am also receiving errors while downloading any file like:
    "C:\Users\****\AppData\Local\Temp\******.001.part could not be saved, because you cannot change the contents of that folder.
    Change the folder properties and try again, or try saving in a different location. I already changed it many many times but still the same problem."
    Adobe flash palyer is also giving problems of not responding. I am using updated version of it already. Java is also updated.
    I already uninstalled firefox compeletly and re installed it many many times but still the same problem. I also scanned my computer with avira and malware bytes' Anti malware and got no dection. Please ractify this problem ASAP lest my profession will suffer.
    == Crash ID(s) ==
    b7f518f2-8d86-41ca-8bab-aee632100709; 1d790e10-d8eb-4904-98c9-94bc62100708; f042d319-b9f8-42ed-a8cb-57c7d2100708

    Please help.
    It is getting worse
    Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
    Please help.

  • Error while running Validation Data for category  not found in application

    Dear Experts
    While running Validation and IC Matching I am getting Error i.e. "Data for category  not found in application CONSOLIDATION"
    May some one tell me the reason and resolution.
    Thanks
    Ritesh

    Hi RItesh,
    I suppose your problem was solved in the meanwhile.
    Anyway we had the same issue, when running Validations against ICMatching App.
    That was because Method VALIDATION of Class CL_UJP_VALIDATE tries to relevant data in order to perform calculations (line 127), but if no data is found, ends raising an exception (with a misleading text line 143).
      read_trans_data_sqe( exporting i_application = d_application
                                     it_dim_list = dt_app_dim_list
                                     it_sel = lt_sel
                           importing
                                     er_t_data = lr_data
      assign lr_data->* to <lt_finance>.
      create data lr_data like line of <lt_finance>.
      assign lr_data->* to <ls_finance>.
      lr_data1 = lr_data.
      if <lt_finance> is initial.
    NO DATA FOUND -> EXCEPTION
        raise exception type cx_ujp_process_exception
              exporting textid = cx_ujp_process_exception=>ex_no_data_found
                        d_application = d_application
                        d_value       = l_value.
      endif.
    Hope it helps
    GFV

  • Error while SO Invoice 'The Item Is Not Relevant For Billing'

    Hi Colleagues,
    I have created a Time and Material Project and when I am trying to Invoice the SO related to particular Project request getting below Error.
    Errro Description :-
    "The item is not relevant for billing"
    Schedule Line Number 0044
    Counter in Control Tables 00
    Message Identification VF
    System Message Number 044
    Output Type I
    Message Variable 01
    Message Variable 02
    Message Variable 03
    Message Variable 04
    Group Type F
    Background :-
    I created a Project
    Entered the time sheet
    Run CATS :- Transfer to Project system
    Display actual cost line items
    Run RRB and created billing request
    In the time of Invoicing SO getting error.
    I have checked all the configuration but unable to sort out the problem.
    Please suggest me if I missed something or need to change the configuration.
    Thanks in Advance
    Regards
    Manoj Bansal

    Hi Venu,
    Thanks for you reply..
    1. I have maintained Billing Relevance "C"
    2. Copy Control Setting is sound good.
    3. There is no billing block on SO.
    4. We have CndType line item :- EKO2 and Billing Type :- 02.
    Please let me know if any further setting is required.
    Regards
    Amitesh

  • Shopping cart Document does not exist error while PO creation

    Hi Friends,
      We are in SRM 5.0 Extended Classic and ECC6.0. I am experiening a issue while sourcing. After shopping cart is created and ends up in sourcing cockpit, I try to create PO, I get the error 'Shopping cart Document does not exist'. I verified Number ranges, org structure, and config settings but unable to find a solution.
    This is at a critical stage where I am not able to create PO and hence process is not complete. I am not able to proceed further and need advise on how or where to look for possible issues. I did look at the other SDN postings but was not pertaining to mine.
    Thanks
    Rao

    hI
    Did you get below error message  **** pit.
    Data not found
    Document does not exist
    i believe the error message will not stop you to do sourcing.
    select and assigned to work area and assign source of supply and create a Purchase order.
    i also faced this error long back.
    br
    Muhtu

  • Unknown File Format Error while Uploading file through SFP in Note Implemen

    Hello All,
    I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
    While doing the manual steps given in the attachment; I am getting following error.
    Error occurred when uploading file (unknown file format)
    Message no. FPUIFB068
    Manual step listed in the attachment is given below:
    Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
    a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
    b) Unzip the .zip file
    c) Execute transaction code 'SFP'.
    d) Enter 'Form' as 'HR_INTAXF162006'.
    e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
    f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
    file system.
    g) Save the form and activate the same.
    Please help/suggest.
    Thanks in advance.
    Arti Dobariya

    Hi,
    ADS has to be configured to perform those manual steps.
    Please check the note 1580196 GTS: Error occurred when uploading file
    (unknown file format).
    The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
    Since ADS was not configured in our system; we end up using  the option of running form 16 in SAP Script.
    Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
    Regards,
    Arti

  • Error during the creation of a delivery note

    Hi,
    While creating the delivery, an error is produced when i saw the log . It was as follows
    "An Item with no delivery quantity is not permitted. Item will be deleted"
    The material is unrestricted, not reserved for any other orders except my PO .
    any idea about this error?
    Thanks and regards

    Hi. The issue was solved. It was related with an incorrect value in the material master record (availability check field).
    Thanks and regards

  • Error while creating Notification: Partner Function is Not Allowed in Partner Determination Profile Q2

    During Notification Creation I get the error --Partner Function is Not Allowed in Partner Determination Profile Q2
    As I enter Purchase Document Number in the transaction QM01 and press Enter. I get the above error and donot go further.
    Can anyone help me here.

    Hello Prashant,
    You are missing some configuration for the partner function;
    Go- to
    SPRO>IMG>QM>Quality Notifications>Notification Creation>Partners>Define partner Determination Procedure>
    Again Select "Define Partner Determination Procedure".
    Select Quality management> Change Partner
    Now Select Q2.
    Compare settings with Partner Determination Procedure on any other client. Also check Partner functions on the same screen.
    Amol.

  • Error  while creating PO --   Unit of measure not defined for lanuage  ZH

    Hi all,
    i  have created the PR with EA as UOM. Then while creating PO, i am getting error like
    '  Unit of measure not defined for lanuage ZH' .
    Then  I execute CUNI
    Then menu is GOTO > Translation > units of measure
    enter source language and target language . After this i am getting the below message
    --->  Language not available on server
    Please suggest what i should do. Thanks.
    Thanks
    pabi

    HI Pabi,
    Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
    Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
    then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
    Br,
    Tushar

Maybe you are looking for