Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Similar Messages

Error while transporting webservice datasources

Hi all,
I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
But while transporting i am getting the folllowing error,
3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Error Screen output without connection to user .
Error when activating DataSource ZANS_MASTER BI7001
Please through some light is there any predefined settings i need to do in QA system?.
Thanks in advance,
V.Sen

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error while transporting Generic Datasource in R/3

Hi All,
I have created a generic datasource(R/3) on a view. As it was in $TMP, I have assigned the datasource, ZABCD, and the view, ZVIEW to a devlopment package and also to a transport request. I released the Transport request and when I tried to import it into Q, it throwed me an error with below messages:
Extract structure ZOX**** is not active
The extract structure ZOX**** of the DataSource ZABCD is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
The errors affect the following components:
BC-BW (SAP Business Information Warehouse Extractors)
The extract structure ZOX**** is the structure used by the datsource. I forgot to assign that to the earlier TR and I think the error is because the structure is missing in the TR. Am I correct?
How should I deal with it now? DO I need to create a new TR with this structure alone as the earlier TR is already released?
Thanks,
RPK.

As you comment it is possible error was not include the structure in earlier TR.
You can create, in se09 or se10, an empty TR. In these transactions you have a buttoun with a box drawed. Set focus on your new empty TR and push button.
Add object from TR transported with error and the missed structure.

Error while Transporting Custom Infostructure

Hi All,
I had created a Custom Infostructure S503 and then move it to quality system.
Later on i had replace one key figure field and regenerate the info structure and also change update rule for new field.
Due to this changes all the earlier records from underlying table S503 gets deleted.
Also there are some records in quality System.
My problem is, when i am transporting the udated infor structure to quality system, its fail to do so
its shows me following error.
Post-import method MCS_METHOD_INFO_GENER started for MCIN L, date and time: 20090604083743
Date: 04.06.09, time: 08:37:43, generated by: DDIC, client 000
Table generator started
Table S503 has been saved
Message from the Data Dictionary:
Activation was interrupted
An error occured during generation of information structure S503.
There are no entries in the log
Errors occurred during post-handling MCS_METHOD_INFO_GENER for MCIN L
MCS_METHOD_INFO_GENER belongs to package MCS
The errors affect the following components:
LO-LIS-DC (Data Collection)
Post-import method MCS_METHOD_INFO_GENER completed for MCIN L, date and time: 20090604083743
Please advice how to resolve this error.
Thanks and Regards
Sunil

Solution : SAP Note 115538 - Changing of self-defined info structures MC22

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

Error while transporting Transformation: Syntax error in Start Routine

Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
Ram

Hi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package).

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Error while running custom BI report in R12.1.1

Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
Praveen

Hi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred.

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Error while transporting the TR to production

Dear experts,
I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

Hi,
this looks like you forgot a transport request or have transported in the wrong order.
Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
Regards,
Klaus

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Error while transporting Openhub (BI7)

Hi Gurus,
I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
"Unable to activate table /BIC/OHZxxxxxx ."
When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
Why this error is happening?
Regards,
Raghavendra.

Hi Raghavendra,
There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
Please create one more transport request and validate the tr objects...
Best Regards,
maruthi

Error while transporting Infocube

Hello all,
i am getting following error while transporting infocube to testing system.
Please see the bellow error message details.
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZMD_Y_MR2)
Structure change at field level (convert table /BIC/FZMD_Y_MR)
Table /BIC/DZMD_Y_MR2 could not be activated
Table /BIC/FZMD_Y_MR could not be activated
Return code..............: 8
Following tables must be converted
ZMD_Y_MR InfoCube could not be activated
Thanks in advance.
BR,
YVReddy

Dear Venkat,
Looks like you have changed the fields on the infocube.Just wanted to make sure that did u delete the 'data' from the cube 'ZMD_Y_MR' in the testing system before u make the traansport?
for any changes in the cube fields (except addition of new char) u may need to delete the cube data..
regards,
Srini

Error while transporting standard cube

Hi
We are facing errors while transporting a standard cube and all relevant objects.
While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
If we ignore and transport the same, transformations es are not being transported.
How to resolve this., please provide inputs.
regards
Lavanya

Hi Lavanya
The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
Cheers
Umesh

Error while transporting 0MAT_PLANT

Hi Experts
I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
it is giving the follwoing error with return code 8
Characteristic 0MAT_PLANT: Master data has to be activated before conversion
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
1.Is it because we have large no of records in Prod system ..??
2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
3.Is it related to any database error in adjusting P table in Prod...?
Please let me know anybody faced this kind of problem.
Regards
Prasad

Hi Prasad,
Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
Please decide accordingly as there is a trade off here!
-VA
Edited by: Vishwa Anand on Sep 27, 2010 12:15 PM

Error while transporting custom datasource

Similar Messages

Maybe you are looking for