Error while transporting LOGO to production

Hi Experts,
i have uploaded a logo using se78 , its displaying in smartform, issue is that when i  am transporting this logo to production error code  4 comes up.
Varun Sharma

Hi,
Make sure you have included this logo in a transport request before transporting the changes to production system. The logo when created is not included in a transport request automatically and hence will recide in the system you have uploaded it in and will not move with your smartform changes.
Hope this helps.
Regards,
Vikas
Edited by: Vikas Shetty on Jun 1, 2009 8:41 AM

Similar Messages

  • Error while transporting Datasources in Production

    Dear All,
    I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
    Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
    DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
    Such errors have occured for most of the Datasources.
    Can anyone let me know
    1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
    2) The possible solution to correct the error.
    Request your kind help to overcome this problem.
    Regards
    Shalabh

    Dear All,
    Thanks for your kind reply.
    There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
    Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
    But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
    Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
    Let me know if I have not understood correctly.
    Many thanks again for your efforts.
    /Shalabh

  • Error while transporting TP in production server in workflow

    Dear All,
    I have done some workflows . It is working fine in development in quality but in production while TP transporting it is showing error like '  Temporary log /usr/sap/trans/tmp/TP number not found'. why this error is coming ?
    Please guide m . Its urgent.
    Regards ,
    Shital

    Shital,
    Do you transporting those requests into PRD as Developer?
    I think it is basis related issue, did you had any word with SAP basis person.
    Any ways could you send long text when it is giving this error.
    May be some sequencing issue in PRD?
    Cheers
    Jai

  • Error while transporting ADDRESS to production system

    Hi all,
    We are in the process of a new rollout and we have created new plants and company codes. the same have been transported to quality and pre-production systems without any issues. however when we transport the same to Production, we face an error
    The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
    The object
      R3TR TDAT ADDRESS_4.6*
    has not yet been imported into client 100 without error.
    the objects are getting transported with same address number as in development which in production points to a different address.
    as far as i know the system should generate a new address number and assign it to the object during transport.
    Any suggestion wud be great

    the log is
       Post-import methods for change/transport request: MEDK909182
          on the application server: ITMISAPGW2
       Post-import method AFTER_IMP_CUST_ADDRESS started for ADDRESS_4.6 T, date and time: 20090714144548
       Post-processing taking place in client 100
       The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
       The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
       The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
       Post-import method AFTER_IMP_CUST_ADDRESS completed for ADDRESS_4.6 T, date and time: 20090714144548
       Post-import methods of change/transport request MEDK909182 completed
            Start of subsequent processing ... 20090714144547
            End of subsequent processing... 20090714144548
       Execute reports for change/transport request: MEDK909182
          on the application server: ITMISAPGW2
       Reports for change/transport request MEDK909182 have been executed
            Start of................ 20090714144548
            End of.................. 20090714144548
       Execution of programs after import (XPRA)
       End date and time : 20090714144548
       Ended with return code:  ===> 8 <===
    regards,
    Tarun
    Edited by: Tarun Bahal on Jul 16, 2009 9:41 PM

  • Error while transporting the TR to production

    Dear experts,
    I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

    Hi,
    this looks like you forgot a transport request or have transported in the wrong order.
    Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
    Regards,
    Klaus

  • Error while transporting a Workbook

    Hi Pioneers
                  I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".     
        Could u let me out with a possible solution....Plz...
    BR
    Sekhar.D.R

    Hi,
    You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • Error while transporting custom datasource

    Hi All,
    Below is the scenario that was carried out in my project.
    1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
    2. Created a custom Datasource ZABC_TEST with the above table.
    3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
    4. Tried transporting the above. But trows error while transporting the data source.
    Error -- InfoSource ZABC_TEST is not available in source system BITST.
    Let me know what can be done to solve the above error. Please suggest if i have missed out something.
    Thanks in advance.
    Maddy

    HI,
    The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
    Transport first the DS in a request, then in another request transport the OHD.
    This should resolve the issue.
    hope this helps.
    thanks,
    rahul

  • Error While Transporting Transformation

    Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
    I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

    Hi,
    You can check if the request is locked by another transport in BWQ by using the transaction SE03.
    First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
    You can check if this object was locked by a person using the transaction SM12.
    Regards,
    Shilpa

  • Error while transporting objects:Internal error during pvc call: Parameter

    Dear all,
    We are facing the following error while transporting the individual configuration objects from our PI development system.
    Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
    However, it works fine when the complete configuration scenario is transported.
    We tried to transport the objects with different user id's, even then the issue still exists.
    Any inputs to resolve this will be highly helpful.
    Thank you,
    Younus

    Hi Mohammed,
    Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
    Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
    regards
    Mickael
    Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

  • Error while transporting Openhub (BI7)

    Hi Gurus,
    I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
    "Unable to activate table /BIC/OHZxxxxxx ."
    When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
    Why this error is happening?
    Regards,
    Raghavendra.

    Hi Raghavendra,
    There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
    and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
    Please create one more transport request and validate the tr objects...
    Best Regards,
    maruthi

  • Error while transporting Infocube

    Hello all,
    i am getting following error while transporting infocube to testing system.
    Please see the bellow error message details.
    Error/warning in dict. activator, detailed log    > Detail
    Structure change at field level (convert table /BIC/DZMD_Y_MR2)
    Structure change at field level (convert table /BIC/FZMD_Y_MR)
    Table /BIC/DZMD_Y_MR2 could not be activated
    Table /BIC/FZMD_Y_MR could not be activated
    Return code..............: 8
    Following tables must be converted
    ZMD_Y_MR InfoCube could not be activated
    Thanks in advance.
    BR,
    YVReddy

    Dear Venkat,
    Looks like you have changed the fields on the infocube.Just wanted to make sure that did u delete the 'data' from the cube 'ZMD_Y_MR' in the testing system before u make the traansport?
    for any changes in the cube fields (except addition of new char) u may need to delete the cube data..
    regards,
    Srini

  • Error while transporting standard cube

    Hi
    We are facing errors while transporting a standard cube and all relevant objects.
    While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
    If we ignore and transport the same, transformations es are not being transported.
    How to resolve this., please provide inputs.
    regards
    Lavanya

    Hi Lavanya
    The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
    This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
    Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
    Cheers
    Umesh

  • Error while transporting 0MAT_PLANT

    Hi Experts
    I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
    it is giving the follwoing error with return code 8
    Characteristic 0MAT_PLANT: Master data has to be activated before conversion
    Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
    RS_AFTER_IMPORT belongs to package RS
    The errors affect the following components:
    BW-WHM (Warehouse Management)
    I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
    1.Is it because we have large no of records in Prod system ..??
    2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
    3.Is it related to any database error in adjusting P table in Prod...?
    Please let me know anybody faced this kind of problem.
    Regards
    Prasad

    Hi Prasad,
    Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
    1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
    The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
    2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
    Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
    Please decide accordingly as there is a trade off here!
    -VA
    Edited by: Vishwa  Anand on Sep 27, 2010 12:15 PM

  • Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

    Hi,
        I am getting following error while transporting export DataSource to quality system.
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    No rule exists
    Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
    Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
    Transformation does not exist (see long text)
        Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
    Regards,
    Pranav.
    Edited by: P D on Sep 20, 2010 9:02 AM

    Hi
      might be your data source not collected into transport request.
    If you are moving data source from once system to other system, this may missed.
    RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
    When ever we are moving objects from one system to other follow below are order to avoid failures
    1).New Infoobjects.
    2). Data source/Infosource
    3). Info Providers ( Cube/DSo)
    4). Update rules/Transformation
    5).Impacted objects and other
    Mahesh.

  • Error while Transporting Update Rules.

    hi xperts,
       I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
        Start of the after-import method for object type R3TR ROUT (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
    The errors affect the following components:
        BW-WHM (Warehouse Management)
    Is the  error,I didn't change any thing in the Cube or changes to Update rules.
    Can anybody Help me?.
       thanking you,
                                   with regards,
                                   Narendra.

    Hi,
    Are you still facuing the issue ?
    No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
    If you know the technical names of the routines you can check in the TADIR table.
    Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
    Hope it helps.
    Thanks,
    Soumya

Maybe you are looking for