Error while transporting the Custom  Selection Screen to Production

Hi All ,
I have created a custom selection screen based on selecting the HR REPORT CATEGORY which gets selected under attributes section of an Executable Program.
Every selection  screen got replicated till quality  but  at Production unable to see the same selection screen
Please provide any suggestion to resolve my probs...
Regards,
Dheeraj

Hi,
This happened to me once.
I have checked my transport logs and found that everything was successfully transported in order and without errors. But the selection screen was not coming in Productio system. So i have tried activaing and generating the program once which solved my problem.
Hope it helps you too.
Thanks,
Venkatesh.

Similar Messages

  • Error while transporting the request from quality to production of BI

    Dear all,
    When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
               Execution of programs after import (XPRA)
               Transport request   : RBDK904992
               System              : RBP
               tp path             : tp
               Version and release: 372.04.04 700
               Post-import methods for change/transport request: RBDK904992
               Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
               Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
               Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
               Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
               The errors affect the following components:
                 BW-WHM (Warehouse Management)
               Post-import methods of change/transport request RBDK904992 completed
                   Start of subsequent processing ... 20080406140407
                   End of subsequent processing... 20080406140408
               Execute reports for change/transport request: RBDK904992
               Reports for change/transport request RBDK904992 have been executed
                   Start of................ 20080406140408
                   End of.................. 20080406140408
               Execution of programs after import (XPRA)
               End date and time : 20080406140408
               Ended with return code:  ===> 8 <===
    Thanks in advance.
    Regards,
    M.M

    Hi,
    First try to figure out the object type from the text obtained by following steps above.
    Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
    After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
    Hope it helps.
    Regards
    Mr Kapadia

  • Error while extracting the data in R/3 production system,

    Hi Team,
    We got the following error while extracting the data in R/3 production system,
    Error 7 When Sending an IDoc R3 3
    No Storage space available for extending the inter 44 R3 299
    No storage space available for extending the inter R3 299
    Error in Source System RSM 340
    Please guide us to fix the issue

    It´s very difficult to help you without knowing
    - what is going to be transferred
    - where you get this error
    - system configuration
    - actual memory usage
    - operating system
    - database and configuration etc. etc.etc. etc.
    I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
    Markus

  • Error While Transporting the DSOs

    Hi Experts,
    I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
    The creation of the export DataSource failed
    Reading the Metadata of APMD0009 ...
    Creating DataSource 8APMD0009 ...
    Password logon no longer possible - too many failed attempts
    Password logon no longer possible - too many failed attempts
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object APMD0009
    The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
    I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
    Can anyone please help me out with this problem.
    Thanks,
    Shalaka.

    Hai shalaka,
    jus check some points in u r transportation.
    check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow  after,or in data flow before ,might be u have selected the in data flow before ,so the datasource  error is happening here
    check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
    Suri..

  • Error while transporting the TR to production

    Dear experts,
    I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

    Hi,
    this looks like you forgot a transport request or have transported in the wrong order.
    Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
    Regards,
    Klaus

  • RC 8 error while transporting the query from Dev to Qa - Element missing

    Hi All,
    I have made a multiprovider by copying one existing one.
    I have copies one of the Bex queries using RSZC from the source to Target MP.
    While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR) 
    Has anyone seen similar types before. Any inputs will be highly appreciated.
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)     
    Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM                                             
    Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M                                           
    End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06                                                                               
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)         
    End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14                  
    Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L                                     
    RS_AFTER_IMPORT belongs to package RS                                                               
    The errors affect the following components:                                                         
       BW-WHM (Warehouse Management)                                                                    
    Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045              
    Post-import methods of change/transport request BDAK959603 completed                                
         Start of subsequent processing ... 20110517070025                                              
         End of subsequent processing... 20110517070045                                            
    Kind regards,

    Hi Jith,
    First of all try to consolidate all your objects in a single TR and then move to Q from D.
    In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
    Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
    1. Go to your transport Logs and then to the entries marked as Error.
    2. There you will find the Query Element Ids, copy them
    3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
    Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

  • Error while opening the custom forms-''function not available to this respo

    Error: Function not available to this responsibility , change responsibility or contact ur system administrator
    Hiiiii,
    While accessing the custom forms in release 12i we are facing the popup error and the form is not getting opened up: "Function Not available to this responsibility. Change Responsibilities or Contact your System Administrator"...
    I check the custom top path in $APPL_TOP/admin/adovars.env... its fine there..
    but the $Apache_top is not there...
    can u plz tell me the solution....
    Thanks
    Meenakshi Verma

    user609981 ,
    If ur referring to forms, u need to search in appropriate forum, as this forum is only for OAF queries, and if its realted to OAF page, check the the function of oa page is attached to the specific responsibilty .
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Application error while testing the custom application

    Hello Experts,
    I've an Enterprise Apllication project named TEST (which is of standard source code of icss)
    The test.EAR file is deployed successfully.
    While testing the custom application link I'm getting the below error,
    like,
    https://host:50001/test/indexStandalone.jsp
    Kindly let me know how to resolve this.
    Any pointers will be appreciated.
    bold
      Application error occurred during request processing.
      Details:   Error [javax.servlet.ServletException: Initialization of Extended Configuration Management failed.
    Could not initialize XCM configuration in Database.
    Check if you have deployed the Software Component 'SAP JAVA DATA DICTIONARY 5.0'].
    Exception id: [001372F65D2500570000008900000F6C000462B4700DAC9F]
    bold
    Thanks & Regards,
    Senthil.

    Hi senthil,
                      I think it is application.xml file. for example it should be look like this after modification.
    <application>
        <display-name>home/(customAppName)</display-name>
        <description>EAR description</description>
         <module>
          <web>
            <web-uri>sap.comcrmicsswebicss_b2b.war</web-uri>
            <context-root>customAppName</context-root>
          </web>
        </module>
    </application>
    check this once.......
    Regards,
    Anil.

  • Errors while transporting the Business Content

    hi all,
    we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
    it says Method Execution - Action Cancelled.
    am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
       Start of the after-import method for object type R3TR IOBJ (Activation Mode)            
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available 
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
       Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available            
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
    Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L                
    The errors affect the following components:                                    
        BW-WHM (Warehouse Management)                                               
    Ended with return code:  ===> 12 <===              
    please revert bact at the earliest....
    Thanks
    Manicks

    hi Manicks,
    check if oss note 903291 helps
    Transporting DataSources
    Transport problem ...Urgent
    Transport Issue
    Number range object missing NRIV and cant activate IOBJ during import
    try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
    also try >> all combined tests >> master data >> check master data for characteristics.
    or run program RSDG_OBJNUMG_CREATE_INTERVAL
    have a try oss note 903291 ?
    Manual solution
    Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
    - RS_OBJNUMG: 0000001 - 9999000
    - RSDDAGCUBE: 100000 - 199999
    - RSSBRAUTH: 00000001 - 99999999
    BW 3.0B
    Import Support Package 30 for 3.0B
    BW 3.10 Content
    Import Support Package 24
    BW 3.50
    Import Support Package 16
    BW 7.0
    Import Support Package 07

  • Error while releasing the custom table

    Hi Everyone,
    Modified the User defined include files of a particular table for one of our requirements ( In the function group of the table maintenance generator ) and encountered an error while releasing the request to Quality server, the error disappeared after regenerating the table, this seem to be happening only when the user includes of a table maintenance is introduced/modified, why the release doesnt work when there is any change in the maintenance generator?,
    Rgds,

    Hi Sailatha,
    After modifying, you need to re-generate everything so that, the changes come in effect.
    Trying to release without re-generating will surely result in error.
    Regards,
    Raj

  • Error while transporting the workflow object

    Hi all,
    Please be informed that while i transported the workflow changes to test system i encountered the sy-subrc 8 error as stated in below screen shots.

    Hi Ranjith
    Seems that the transport error is showing that your ID has locked the Workflow (user REDDYRAN).
    Can you do a syntax check of the workflow transported in this transport - in pftc and swdd? Do we get any error?
    Also see if you can execute FM SWD_WFD_REPLICATE_FROM_9999 in Quality (in SM37)  - provide the IM_TASK = WSxxxxxxxx (your workflow number).
    regards,
    Modak

  • Error while transporting the Vendor in MM-SUS

    HI
    We are implementing SRM server 5.5 and follow a MM-sus scenario.
    We were able to transport the vendor to SUS via BD14.
    but now we are reciveing an error -
    An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
      </standard>
      </nr1:StandardMessageFault>
    Can some throw light on this error.
    Previously when we transffered the vendor to SUS an user
    was getting created in su01 which is not getting created.
    2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
    regards,
    Nimish Sheth

    Hi,
       Did you see the note 807812?
    BR,
    Disha.
    Pls reward points for helpful answers.

  • Error while transporting the transfermactions

    hi,
    i am transporting transformations dev to qty. while transporting i am getting error msg:
    1) No Rules exists.
    Transformation : Rules  1 could not be  imported.
    Transformation : Rules  2 could not be  imported.
    Transformation : Rules  3 could not be  imported.
    No fields were supplied.

    Hi Shilpa Reddy
    Just a quick spot it may be because of incorrect transport collection or multi modifications of transformation under a single transport .
    Just replicate the data source in Target system RSA1>Source System>DS right click replicate .
    and create a new transport in development system by reactivating the transformations and then release it in SE01 and then go to the Target system and go for STMS import it.
    Small Note have you mapped all the info objects ,have imported the specified info objects into your target system if not then please do it and then import the transformation request.
    Hope its clear a little..!
    Thanks
    (P159793)K M R
    **Assigning points is the only way of saying thanks in SDN***
    >
    shilpa  Reddy wrote:
    > hi,
    >
    >
    > i am transporting transformations dev to qty. while transporting i am getting error msg:
    >
    > 1) No Rules exists.
    >  Transformation : Rules  1 could not be  imported.
    >  Transformation : Rules  2 could not be  imported.
    >  Transformation : Rules  3 could not be  imported.
    >
    >
    > No fields were supplied.
    Edited by: P159793 on Dec 30, 2008 4:55 PM

  • Error while Migrating the custom routines in Transformations

    Dear All,
    I am in the process of migrating BW 3.5 to BI 7.0.I migrated the Standard cubes and DSO's from BW3.5 to BI 7.0 flow successfully.
    But while migrating the transformations which are having the custom routines,I am facing the below errors.
    The data object "COMM_STRUCTURE" does not have a component called BIC/ZGROSSPRI".But the routine contains BIC/ZGROSSPRI.
    I tried to change the BW 3.5 terminology to BI 7.0 terminology.(Like COMM_STRUCTURE replaced by SOURCE_FIELDS).But unable to solve.There are nearly 20 custome routines written in all transformations.
    Can any one guide me who faced the same tyepe of problem?
    Thanks & Regards,
    Dinakar

    HI,
    We need to include Source and Target see the below article.
    http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    How to Correct Routines in Transformations
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20correct%20routines%20in%20transformations.pdf
    Thanks
    Reddy

  • Error While Submitting the Custom Report

    Hello,
    We have requirement on reports 6i to customise a standard report 'Sales Journal By Customer'. Requirement is we need to add a new fields in the layout.
    We have copied the standard program and parameters and defined a new custom program and also added the required additional parameters. But when we are trying to submit the custom program it is giving the following error:
    APP-FND-00806: The default value RTT is invalid for the Reporting Context segment. Your default value will be ignored. Please inform your system administrator that:
    Add the value RTT to the value set for segment Reporting Context, or choose another default value in the Key Flexfield Segments form or Descriptive Flexfield Segments form. Use the Edit Concurrent Program or Define Report Set form for Standard Report Submission report defaults.
    Value RTT for the flexfield segment Reporting Context does not exist in the value set FND_MO_REPORTING_ENTITY.
    Standard report call a query inside the rdf.
    written in parameter sql stmt.
    SELECT ENTITY_NAME, ENTITY_ID
    FROM FND_MO_REPORTING_ENTITIES_V
    WHERE REPORTING_LEVEL = $FLEX$.FND_MO_REPORTING_LEVEL
    AND ROWNUM = 1;
    now we are change this to
    SELECT ENTITY_NAME, ENTITY_ID FROM FND_MO_REPORTING_ENTITIES_V WHERE ENTITY_NAME = 'RTT';
    we are making hard code.
    we are making a request and attach that report to that request and run the request.
    We have done this customisation at our local instance but we are facing the same issue .We are unable to figure out the issue.
    Does any of you have any idea why we are getting this error.
    It would be great if you can help us regarding this issue.
    Thanks in Advance

    as this is an eBuiness-related error, you have more chance to get an answer in an eBusiness-related forum, maybe here OA Framework

Maybe you are looking for

  • How do I re-install my two Adobe products without having the original software installation CDs?

    I purchase Adobe Photoshop Elements 10 and Adobe Premiere Elements 10 in 2011 or 2012 (I can't remember the exact date).  I installed both products on my home desktop PC, then later on my work laptop.  The motherboard on my home PC crashed recently a

  • CS6 on MAC cannot be activated with our educational key

    One of the teachers is determined to work on a MAC. So the school decided to put one MAC device in the classroom where this teacher can work on. Students all work on PC's. We have an educational license for CS6 master collection. But now we cannot ge

  • Adobe Media Encoder Excessively Slow After New Update

    Recently (since the last update it seems like) Media Encoder has been excessively slow for me. For example - I loaded 4 videos in the the queue from Premiere that were about 5-10 minutes each. These videos were shot on DSLR and was a one shot the who

  • Migrating from PowerBook G4 to MacBook Pro

    How do I migrate my PowerBook G4 (powerPC) using OSX 10.5.8 files to newer MacBook Pro using OSX 10.8.4 with user and applications already installed? I'm replacing my G4 and inheriting hubby's older MacBook Pro (he has new machine) and want my files,

  • Relation Between Service Rendered date and Pricing

    Hi All,      I have a sale order for both sevice item and product.and it is order related billing.I have already billed the service line item.Now when i change the service rendered date in the sale order header,the net price for that service item bec