Error while transporting the TR to production
Dear experts,
I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)
Hi,
this looks like you forgot a transport request or have transported in the wrong order.
Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
Regards,
Klaus
Similar Messages
-
Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
MadhuHi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure -
Error While Transporting the DSOs
Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Can anyone please help me out with this problem.
Thanks,
Shalaka.Hai shalaka,
jus check some points in u r transportation.
check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow after,or in data flow before ,might be u have selected the in data flow before ,so the datasource error is happening here
check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
Suri.. -
RC 8 error while transporting the query from Dev to Qa - Element missing
Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
Start of subsequent processing ... 20110517070025
End of subsequent processing... 20110517070045
Kind regards,Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you. -
Errors while transporting the Business Content
hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
Start of the after-import method for object type R3TR IOBJ (Activation Mode)
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manickshi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07 -
Error while transporting the Custom Selection Screen to Production
Hi All ,
I have created a custom selection screen based on selecting the HR REPORT CATEGORY which gets selected under attributes section of an Executable Program.
Every selection screen got replicated till quality but at Production unable to see the same selection screen
Please provide any suggestion to resolve my probs...
Regards,
DheerajHi,
This happened to me once.
I have checked my transport logs and found that everything was successfully transported in order and without errors. But the selection screen was not coming in Productio system. So i have tried activaing and generating the program once which solved my problem.
Hope it helps you too.
Thanks,
Venkatesh. -
Reg: Error while transporting from Quality to Production
Hi ,
I am facing a problem while transporting ODS from quality to production.. The same works perfectly when i transport from Dev to quality.
The Error Displayed while transporting is
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when resetting DataStore Object to the active version
Kindly give me some suggestion ..
Thanks in advance
Regards
Gurugo to the source system RFC connection in SM59 and do a remote login - if you get the login page there then there is an issue with the RFC connection. also check if any other system is using the same RFC.. we had a situation where th R/3 connection was being used by 3 BI instances and everytime we reset the password , another system would lock the sme , ultimately we identified the systems and did a password reset in all the systems and then the issue got resolved.
but then we also faced the same issue you faced and it was related to login issues - check the remote login and that will tell you. -
Error while transporting the Vendor in MM-SUS
HI
We are implementing SRM server 5.5 and follow a MM-sus scenario.
We were able to transport the vendor to SUS via BD14.
but now we are reciveing an error -
An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
Can some throw light on this error.
Previously when we transffered the vendor to SUS an user
was getting created in su01 which is not getting created.
2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
regards,
Nimish ShethHi,
Did you see the note 807812?
BR,
Disha.
Pls reward points for helpful answers. -
Error while transporting the transfermactions
hi,
i am transporting transformations dev to qty. while transporting i am getting error msg:
1) No Rules exists.
Transformation : Rules 1 could not be imported.
Transformation : Rules 2 could not be imported.
Transformation : Rules 3 could not be imported.
No fields were supplied.Hi Shilpa Reddy
Just a quick spot it may be because of incorrect transport collection or multi modifications of transformation under a single transport .
Just replicate the data source in Target system RSA1>Source System>DS right click replicate .
and create a new transport in development system by reactivating the transformations and then release it in SE01 and then go to the Target system and go for STMS import it.
Small Note have you mapped all the info objects ,have imported the specified info objects into your target system if not then please do it and then import the transformation request.
Hope its clear a little..!
Thanks
(P159793)K M R
**Assigning points is the only way of saying thanks in SDN***
>
shilpa Reddy wrote:
> hi,
>
>
> i am transporting transformations dev to qty. while transporting i am getting error msg:
>
> 1) No Rules exists.
> Transformation : Rules 1 could not be imported.
> Transformation : Rules 2 could not be imported.
> Transformation : Rules 3 could not be imported.
>
>
> No fields were supplied.
Edited by: P159793 on Dec 30, 2008 4:55 PM -
Error while transporting the workflow object
Hi all,
Please be informed that while i transported the workflow changes to test system i encountered the sy-subrc 8 error as stated in below screen shots.Hi Ranjith
Seems that the transport error is showing that your ID has locked the Workflow (user REDDYRAN).
Can you do a syntax check of the workflow transported in this transport - in pftc and swdd? Do we get any error?
Also see if you can execute FM SWD_WFD_REPLICATE_FROM_9999 in Quality (in SM37) - provide the IM_TASK = WSxxxxxxxx (your workflow number).
regards,
Modak -
Error while adding the issue for production (item cost not found)
Hi all,
The scenario is,
when the user is trying to add the issue for production system is showing error item cost not
found.The item which is issued is Inventory + purchase item with manual issue method.The valuation
method for that item is FIFO.since the valuation method is FIFO,error related to item cost should
not occur.
Since the valuation method is FIFO.Item cost error should not occur.
The error related to item cost must not occur at the time of issue for production.
Regards-
Mona.Hi!
Please check these threads
Sales Delivery Document
Item Cost Error
No item cost was found -
Error while transporting the badi from dev to quality server
Dear Freinds
Iam getting the error " Method Execution 21.11.2007 11:55:03 (8) Ended with errors "
i expended the error (with return code as 8) and i found th below errors
Multiple active implementations for definition HRECM00_CALCBASE
Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
AFTER_IMP_SXCI belongs to package SECE --- what does this mean??
The errors affect the following components:
BC-DWB-CEX (Customer Enhancements)
What exactly this error iam not able to trace . Before releasing the object from the
development server i have see any error's are there the extended check hasnt given me any errors either.
The help for this error says that
"Procedure
Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
i have did what sap has said ............. i can see that in the quality server a custom badi
of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
any one have idea on this error pleae let me know.
regards
saymala r.hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika -
Getting the error while transporting the log file
Hi,
I have the primary and physical standby setup on my pc. i want to transport the log file by using the command on primary database
alter system archive current log;
alter system swicth archive logfile;
i am recieving error not able to find the log sequence 15 #.
Thanks
vj0011590OCI requires a native library.
Native libraries must be in the shared library path of the application (this is a feature of the OS not java.) -
Error while transporting the request from quality to production of BI
Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
Execution of programs after import (XPRA)
Transport request : RBDK904992
System : RBP
tp path : tp
Version and release: 372.04.04 700
Post-import methods for change/transport request: RBDK904992
Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request RBDK904992 completed
Start of subsequent processing ... 20080406140407
End of subsequent processing... 20080406140408
Execute reports for change/transport request: RBDK904992
Reports for change/transport request RBDK904992 have been executed
Start of................ 20080406140408
End of.................. 20080406140408
Execution of programs after import (XPRA)
End date and time : 20080406140408
Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.MHi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia -
Error while transporting the cube
Hi all,
While I was transporting my cube from Development box to Acceptance box, following error occured.
Execution of programs after import (XPRA)
Transport request : GCDK905220
System : NCA
tp path : /usr/sap/NCA/DVEBMGS01/exe/tp
Version and release: 372.04.10 700
Post-import methods for change/transport request: GCDK905220
on the application server: bdhp4684
Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20080802045222
Program terminated (job: RDDEXECL, no.: 04522200)
See job log
Execution of programs after import (XPRA)
End date and time : 20080802045237
Ended with return code: ===> 12 <===
Actually transport failed but the cube was present in the Acceptance box in inactive state
Please help me for the same.
With thanks and regards
Mukul SinghalHi Mukul,
This is an RC=12 issue.Contact the basis team or raise ticket basis team stating that your specified transport request is got terminated.Basis team will resolve the issue and then you can Import the transport into your acceptance system.
I hope it will help you.
Regards
Suresh B.G.
Maybe you are looking for
-
Setting a password at the web gallery level
Hi, I would like to host multiple password-protected albums in my web gallery but don't want to require my viewers to enter a password for each album they visit. Is there some way I can set password protection at the web gallery level and make all al
-
IPhoto was open, but "unexpectedly quit". When I opened it again a couple days later, my most recent photo uploads (for the past month or so) were missing, with dated Events folders saying "no photos". This had happened another time about a year ago
-
How do I reenter the set up mode in os 6 install?
I got all the way through the os 6 install process, and began the set up process on the iphone itself. It prompted me to select a wifi network, which I did, but it kept timing out. I figured out that it wasn't connecting because with this particula
-
How to modify the size of the editable drop down
I have used the editable drop down list which works perfectly. The only problem i find is that it has a static width, unlike a regular select/option list that adjust according to the lengh of the data that is in it. Is there any way i can adjust the
-
Value comparison for specific time
Hi Everyone, I have a vi to see if a number falls in a range for a specified duration .The input is at 51.2kHz.I want the vi to do the following ; Say if the input/value is continously in range for a specified duration ( say 5 seconds) it turns on an