Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
Errors when activating update rule XXX
IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

Similar Messages

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while activating update rule in Inventory

I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.

1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu

ASSERTION FAILED error while migrating update rules

Hi all,
We are migrating the 3.x datasource for sd - lo cockpit.
Migration steps are as follows...
1. Make a copy of the infosouce. Activate it.
2. Migrate transfer rules. Activate it.
3. Migrate datasource.
4. Migrate Update rules for the respective info providers.
      But while migrating update rules ASSERTION_FAILED runtime error occurs.
       the assert condition was violated.
       CL_RSTRAN_TEMPLATE========CP or CL_RSTRAN_TEMPLATE======CM003
Please help i tried all the means to rectify but none succeds.
It is occuring for each datasource .
Thanks in advance.
aravind

Hello
Assertion statement is like a conditional break point in ABAP. When you are trying to migrate the update rules,it is failing with Assertion statement it means there is some error with your update rules. Either the mapping is wrong or the the target to which it is mapped is in inactive state. Please check these and retry your migration.
Regards,
Krishna Tangudu

DSO error while creating update rules

Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
Peddinti

Hi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar

Error in Transporting Update Rules

Hi,
I am transporting ODS, Info package and UPdate Rule from Dev to QA.
I request seems to be fine, but transport ended in error.
ODS, IP and UR got transported , but the UR is inactive.
and i dont havr the permission to activate that in QA system.
What could be the reason for inactive UR in QA.

I have done that also,
But it is giving error as :
Error when activating update rule 49U3N0VD2IJOOELH5APVBBIP1
Activation of the update rules for ZFY6_SDT ZIB_SHIPDAILY_TRAN
IC=ZFY6_SDT IS=ZIB_SHIPDAILY_TRAN error when checking the update rules
Start of the after-import method for object type R3TR UPDR (Delete Mode)
Update rules 49U3N0VD2IJOOELH5APVBBIP1 read in version M
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
    BW-WHM (Warehouse Management)
Please help me out, all the dependent objects are present in the QA
Dependent Objects:
Info Objects
ODS
Info Source
Transfer and comm str
Info pacakge

Error while transfering update rules

Hi all,
I am trying to transfer business content for 0SRCT_DS1(Contract Management) from D to Q in BW3.5.
Everything went through except for the update rules.
I checked and rechecked if all the infoobjects are active.
But still am getting the following error:
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules CB1GEUI48SB210JQAYD68E74J read in version M
Error when activating update rule CB1GEUI48SB210JQAYD68E74J
Activation of the update rules for 0SRCT_DS1 2LIS_02_SCL
IC=0SRCT_DS1 IS=2LIS_02_SCL error when checking the update rules
any suggestions?

Hi ,
Just check whether update rules has any routines or fomula, or constant.
If so collect that in a request and transport it.
Assign points if it is helpful.
Thanks
Shanba

'L_CHAVL_IN' Error while Activating Update Rules.

Hi All,
 when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
 i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
 Please give me a solution how to solve this.
Regards,
Ramana.

Check the following SAP Note (# 782858)
Symptom
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
Other terms
Syntax error; generation; l_chavl_in; update rules
Reason and Prerequisites
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
Solution
BW 3.0B
 Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
 Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
 Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.

Getting error while activatinb update rule 2LIS_02_SCL

Hello BW gurus,
I have activated and replicated datasources for PP and activated the 0PUR_C01 infocube now I am activating the update rule 2LIS_02_SCL but while activating the update rule iam getting error message
"Object UPDR CD2NYEJKIIFCCFA9FW1OQRONE could not be found"
which is nothing but the technical name of 2LIS_02_SCL. in GROUPING TAB I have selected " only necessary objects" option.
Any help on this is greatly appreciated can you please suggest me how I can troubleshoot this.
I will assign points to all appropriate answers.
Thank you,
Krish

Hi Krish
Don't worry about the error message.
RSA1-> Business content-> here select the update rules from 2LIS_02_SCL to cube 0PUR_C01 and with only necessary objects option-> Install update rules with applicable routines. Then refresh RSA1 and check for update rules. If still you don't get update rules, please let me know
Regards
Pradip

ABAP Runtime error while activating Update rules.

Hi Gurus,
Actually we are in NW 2004's SP9.
While activating the update rules of cube "0PY_PPC01" it is going to ABAP runtime error. It is giving the key words like "MESSAGE_TYPE_X"
"%_T005K2" or "INSTANTIATE". And i apply NOTEs also i am unable to fix it.
Can any one give correct NOTE number that can fix it or any suggestions.
Thanks in advance.
Thanks
Raju.k

Hi Sven,
Now we are also in SP11, But the thing is all the other UR are working fine Except
this UR. Even there is no perticular NOTE number for this.
Thanks
Raju.k

Error while copying Update rules from One Cube to other

I am getting the following error message while I was trying to copy an existing update rule from an existing InfoCube to a New InfoCube. Has anyone experienced this before? Please let me know how to resolve this.
Formula 3ZKQ....... (Object version M) could not be read.
The new and original cubes are custom cubes.
Thanks!

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Activating SIS structure error while maintaining update rules

Hi Experts
please reply <removed by moderator>
i am trying to activate self defined SIS structure but at the time of creating maintain update rule in transaction MC24 i am getting error
please guide what i am missing
DDIC structure S990 for info structure S990 not active in Data Dictionary
Message no. M2464
Diagnosis
It is not possible to maintain the updating procedure since DDIC structure S990, which belongs to info structure S990, is not active.
The info structure has probably been saved but not generated.
Procedure
The info structure must be generated.
Regards
Abhi
Message was edited by: Manish Kumar

Hi ,
Just check whether update rules has any routines or fomula, or constant.
If so collect that in a request and transport it.
Assign points if it is helpful.
Thanks
Shanba

Error while Activating update rule in BW

Hi,
I am getting an ABAP dump while activating an update rule. The rule is from DSO to cube.
"MESSAGE_TYPE_X" " "
"%_T020N1" or "%_T020N1"
"INSTANTIATE"
I have added some new fields in a DSO. The rule is from DSO to cube. While activating it, I am getting this ABAP dump. There are few other rules from this DSO to other DSO which got activated but this one is causing dump.
Any ideas/suggestions on this would be really helpful.
Thanks,
Naveen

Hi
Check if your Cube , DSO and UR's are active. If not reactivate them. Ideally you could recreate the UR's and check the status by running the extraction.
I would also recommend to use elimination method to check if any particular field is creating an issue. While recreating the UR's , create them for a few fields - active - check extraction - this will also let you know if the issue is within any oif the rules.
Cheers
Umesh

Error while transporting Infocube and Update rules

Hi ,
My infocube is having warnings for 4 key figures as "InfoCube contains the key figure 0DSCT_PCT1 with the impermissible aggregation NOP" .But when I ma trying to transport I am getting eroors in transport but still The cube got migrated in active form.But the update rules are not getting transported.They show me an error Error when activating update rule 3CFLSNV4LN26C1URF15PR6XSA ". This is very urgent for me.
Can any one help me please.I promise to give reward points.
Thanks,
Jyothi.

Hi,
My key figures are in active form only.I transported the active keyfigures from development to quality.I am not supposed to make any changes directly in QA .My problem is in transporting update rules.It gives an error message 095 Error when activating update rule "3CFLSNV4LN26C1URF15PR6XSA"
461 IC="0FIAR_C03" IS="80FIAR_O03" error when checking the update rules
Errors occurred during post-handling "RS_AFTER_IMPORT" for "ROUT" "L"
The errors affect the following components:
"BW-WHM" ("Warehouse Management").

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error while transporting update rule.

Similar Messages

Maybe you are looking for