Error while trying to access data from virtual provider - Technical Content

Hi,
  I am trying to install the new BI 2004s technical content.  I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error:
Error reading the data of InfoProvider 0TCT_VC11
There is still no data source assigned to VirtualProvider 0TCT_VC11
The virtual providers are of type "virtual provider based on DTP"  since standard technical content didnt have any DTPs for the VC cubes I tried to create some direct access DTPs based on datasources 0TCT_DS11 but there also getting error:
Source doesnt support direct access
I saw the type for datasource 0TCT_DS11 and its using SAP SAPI and not direct access and couldnt change the type actually the same datasource is also used by cube 0TCT_C11 so changing the type probably wouldnt have been a good idea.
I found the following notes 996735 and implemented its change...but no use...
we are on SP10 and content 7.03 SP2.  Can anybody please help??

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

Similar Messages

  • Error while trying to retrieve data from BW BEx query

    The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
    In BEx report there is a limitation but is it also a limitation in Webi report.
    Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
    A database error occured. The database error text is: The MDX query SELECT  { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

    Hi,
    That warning / error message will be coming from the MDX interface on the BW server.  It does not originate from BOBJ.
    This question would be better asked to support component BW-BEX-OT-MDX
    Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
    Regards,
    Henry

  • Error while trying to access dashboards from EPM

    Hi
    We integrated OBIEE 10.1.3.4 with EPM 11.2 and when we are trying to access dashboards from EPM we are facing the following error : "Invalid or could not find module configuration."
    Please , help us in solving the above issue.
    Thanks.

    Hi all,
    The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
    In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
    In that case, you have to:
    1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
    2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
    This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
    Best regards,
    Rudolf Hennecke
    SAP NetWeaver RIG BI

  • Error while trying to access repository from Application Explorer

    Hi All,
    I am trying to access the targets which I had previously created from AE. Everything was working fine. When I tried running iwae.sh script and open the target from AE it throws below error today.
    com.iwaysoftware.iwrepository.RepositoryException
    at com.iwaysoftware.iwrepository.xml.XMLRepository.end(XMLRepository.java:272)
    at com.iwaysoftware.iwrepository.xml.file.FileRepository.end(FileRepository.java:436)
    at com.iwaysoftware.iwrepository.xml.XMLQuery.executeQuery(XMLQuery.java:863)
    at com.iwaysoftware.af.container.IWAFRepositoryOP.getConfigs(IWAFRepositoryOP.java:167)
    at com.iwaysoftware.af.container.IWAFRepositoryStorage.listConfigurations(IWAFRepositoryStorage.java:215)
    at com.iwaysoftware.af.container.ChannelManager.listConfigurations(ChannelManager.java:100)
    at com.iwaysoftware.af.container.IWAFContainer.listChannelConfigurations(IWAFContainer.java:360)
    at com.iwaysoftware.af.container.AEManager.buildChannelList(AEManager.java:252)
    Not sure what has changed? Is this a corruption with the repository.xml file ? Is there any way to get around this error.
    Regards
    Subhankar

    Hi all,
    The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
    In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
    In that case, you have to:
    1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
    2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
    This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
    Best regards,
    Rudolf Hennecke
    SAP NetWeaver RIG BI

  • TNS-12518 error while trying to fetch data from SQL Server

    Hi everyone,
    I'm trying to establish connectivity from Oracle 10.2 server to a SQL Server 2005. These are the server details
    DOVER - This is where I installed Oracle Gateway for SQL Server. There's already an Oracle home in this server and I have used the existing listener for the incoming connections
    LUNDY - This is where my actual Oracle server resides
    HEBRIDES - This is where SQL Server 2005 instance resides, the database name is TRACKIT90
    I've set everything as explained in Oracle documentation http://download.oracle.com/docs/cd/B19306_01/gateways.102/b14270/ch2.htm#i1005694 but in the end I'm getting an TNS-12518: TNS:listener could not hand off client connection when I run a test query and this is what it says in the listener.log of DOVER
    01-MAR-2010 15:33:19 * (CONNECT_DATA=(SERVICE_NAME=tg4msql)(HS=OK)(CID=(PROGRAM=w:\oracle\product\10.2.0\db_1\bin\ORACLE.EXE)(HOST=LUNDY)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.58)(PORT=3887)) * establish * tg4msql * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
    32-bit Windows Error: 2: No such file or directory
    My initialization parameter under \\ORACLE_HOME\tg4msql\admin of gateway installation in DOVER is as below:
    HS_FDS_CONNECT_INFO=hebrides.TRACKIT90
    HS_FDS_TRACE_LEVEL=OFF
    HS_FDS_RECOVERY_ACCOUNT=RECOVER
    HS_FDS_RECOVERY_PWD=RECOVER
    The listener.ora of the active listener in DOVER has the following lines, by the way this listener does not reside on the same ORACLE_HOME as the gateway's ORACLE_HOME but it is the current active listener in the server. The listener has also been stopped and started:
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = dover)(PORT = 1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    SID_LIST_LISTENER =
    (SID_DESC =
    (SID_NAME = tg4msql)
    (ORACLE_HOME = E:\oracle\product\10.2.0\tg_1)
    (PROGRAM = tg4msql)
    The following entry has been added to the tnsnames.ora in LUNDY server where my actual Oracle database resides.
    TRACKIT_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = DOVER)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = tg4msql)
    (HS = OK)
    And finally a database link is created by using the below DDL statement:
    CREATE DATABASE LINK "DLINK" CONNECT TO "username" IDENTIFIED BY "password" USING 'TRACKIT_DATA';
    When I do a select statement on one of the tables of TRACKIT database by using the following query I got the TNS-12518 error with above details
    select * from announcement@dlink;
    I would appreciate any help and also please let me know if I missed out any details.
    Thanks.

    This is the output comes with the "lsnrctl service listener" command on DOVER server
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-MAR-2010 11:48:55
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "STD81" has 1 instance(s).
    Instance "STD81", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:5 refused:0
    LOCAL SERVER
    Service "STD81" has 1 instance(s).
    Instance "std81", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:4234 refused:0 state:ready
    LOCAL SERVER
    Service "STD81_XPT" has 1 instance(s).
    Instance "std81", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:4234 refused:0 state:ready
    LOCAL SERVER
    Service "tg4msql" has 1 instance(s).
    Instance "tg4msql", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:22
    LOCAL SERVER
    The command completed successfully

  • Error while trying to export data from Solution Manager 3.1

    Hello, when trying to export a project via SOLAR_MIGRATION in Solution Manager 3.1, I get the following error when trying to release the transport:
    COMMUNICATION_FAILURE for RFC call SCMS_CONT_EXPORT (destination SAPKPROTP): / RfcExecProg: SAP0451.
    Error in calling KPro transport server
    Has anyone experienced this or have an idea how to reslove it?  I opened a message through OSS and received this feedback:
    sapkprotp is not available for AS/400.
    In your case, sapkprotp must be started on the SAP Content Server.
    sapkprotp must then be started via a SAP Gateway connection.
    Please change the RFC destination of SAPKPROTP so that
    the program must be started on your SAP Gateway on the content server
    computer.
    We currently don't have a Content Server and I would like to be able to export this project without having to install a new application on a Windows server.  I would appreciate any insight you may have into this.  Thank you.
    ~TJ

    If you don't have one already create a gateway instance on your Content Server.
    Change or create the RFC destination :  SAPKPROTP   type = T
    Check the radio button to start on Expicit Host 
    Enter the program = c:\winnt\sapkprotp.exe
    Enter target  host - use the hostname of the server for your Content Server
    Enter the Gateway information
    Regards,
    Brian

  • Error while trying to copy template from another application

    Hi,
    I am getting this error while trying to copy template from another application:
    report error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    This report is located here:
    Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
    best regards,

    It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
    Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
    The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
    I would just as a matter of course reset the TC to factory and redo its setup.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
    Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
    No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

  • LPX-00601: Invalid token in: err while trying to read data from xml

    Hey ,
    While trying to read data from xml i got err:
    LPX-00601: Invalid token in: 'path'
    the proc. i'm using to read data from the xml is:
    procedure read_xml_file_test (in_filename in varchar2)
    is
    my_dir  varchar2(20) := 'XML_DIR;
      cur_emp2 number:=0;
      l_bfile   BFILE;
      l_clob    CLOB;
      l_parser  dbms_xmlparser.Parser;
      l_doc     dbms_xmldom.DOMDocument;
      l_nl      dbms_xmldom.DOMNodeList;
      l_nl2    dbms_xmldom.DOMNodeList;
      l_n       dbms_xmldom.DOMNode; 
      l_n2     dbms_xmldom.DOMNode;
      l_temp    VARCHAR2(1000);
    v_errors        internet_clients.errors%type; 
    src_csid       NUMBER := NLS_CHARSET_ID('UTF8'); 
    dest_offset    INTEGER := 1;
    src_offset     INTEGER := 1;
    lang_context   INTEGER := dbms_lob.default_lang_ctx;
    warning        INTEGER;
    v_count       number := 0;   --total records
    v_count_s      number := 0;   -- sucsess record
    v_count_f      number := 0;   -- failed record
    v_flag varchar2(1);
    v_char2 varchar2(1);
    v_l1 VARCHAR2(255);
    v_l2 VARCHAR2(255);
    v_l3 VARCHAR2(255);
    v_l4 VARCHAR2(255);
    v_l6 VARCHAR2(255);
    BEGIN
      l_bfile := BFileName(my_dir, in_filename);
      dbms_lob.createtemporary(l_clob, cache=>FALSE);
      dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
      dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);                        
      dbms_lob.close(l_bfile);
      -- make sure implicit date conversions are performed correctly
      dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');   
      -- Create a parser.
      l_parser := dbms_xmlparser.newParser;
      -- Parse the document and create a new DOM document.
        dbms_xmlparser.parseClob(l_parser, l_clob);
        l_doc := dbms_xmlparser.getDocument(l_parser);
      -- Free resources associated with the CLOB and Parser now they are no longer needed.
      dbms_lob.freetemporary(l_clob);
      dbms_xmlparser.freeParser(l_parser);  
      -- Get a list of all the  nodes in the document using the XPATH syntax.
      l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
      -- Loop through the list and create a new record in a tble collection
      -- for each  record.
      FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
       l_n := dbms_xmldom.item(l_nl, cur_emp);
       cur_emp2:=0;
       loop
         v_count := v_count + 1;
         begin
        -- Use XPATH syntax to assign values to he elements of the collection.
        dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
        dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
        dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
        dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
        dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
            exception
      when others then 
      null;
      end;
    exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
      END LOOP;
      end loop;
      -- Free any resources associated with the document now it
      -- is no longer needed.
      dbms_xmldom.freeDocument(l_doc);
      --remove file to another directory   
          --COMMIT;  -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows"  clause.    
      /*EXCEPTION
      /*WHEN OTHERS THEN
       dbms_lob.freetemporary(l_clob);
        dbms_xmlparser.freeParser(l_parser);
       dbms_xmldom.freeDocument(l_doc);
        null;
        ROLLBACK; */
    END;While trying to execute this i got:
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
    ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
    ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
    ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
    ORA-06512: at line 1
    i guess i mised somthing at the line
    l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <soap:Body>
    - <GetFieldsNameResponse xmlns="http://tempuri.org/">
    - <GetFieldsNameResult>
    - <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
    - <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
    - <xs:complexType>
    - <xs:choice minOccurs="0" maxOccurs="unbounded">
    - <xs:element name="FRM_GANERIC_PROP">
    - <xs:complexType>
    - <xs:sequence>
      </xs:sequence>
      </xs:complexType>
      </xs:element>
      </xs:choice>
      </xs:complexType>
      </xs:element>
      </xs:schema>
    - <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
    - <DataSet_FRM_GANERIC_PROP xmlns="">
    - <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
      <L1>val1</L1>
      <L2>val2</L2>
      <L3>val3</L3>
      <L4>val4</L4>
      <L6>val6</L6>
      </FRM_GANERIC_PROP>
      </DataSet_FRM_GANERIC_PROP>
      </diffgr:diffgram>
      </GetFieldsNameResult>
      </GetFieldsNameResponse>
      </soap:Body>
      </soap:Envelope>I Guess it somthing that have to do with node definition ,
    but i have tried so many combinations and none ot those worked for me.
    i'm deeply stuck here.
    What do i miss here?
    THANKS yair
    Edited by: yair_k on 02:30 14/10/2010

    Hey , after got a lot of success with the xml reading part , i wonder if you
    can help me with a problem while trying to reading that xml from a web service.
    i use a procedure as followes:
    FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
      RETURN CHAR
    AS
      l_service          UTL_DBWS.service;
      l_call             UTL_DBWS.call;
      l_a_ns                     VARCHAR2(32767);
      l_wsdl_url         VARCHAR2(32767);
      l_namespace        VARCHAR2(32767);
      l_service_qname    UTL_DBWS.qname;
      l_port_qname       UTL_DBWS.qname;
      l_operation_qname  UTL_DBWS.qname;
      l_xmltype_in       SYS.XMLTYPE;
      l_xmltype_out      SYS.XMLTYPE;
      l_return           VARCHAR2(32767);
    BEGIN
      l_wsdl_url        := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
      l_namespace       := 'http://tempuri.org/';
      l_service_qname   := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
      l_port_qname      := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
      l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
      l_service := UTL_DBWS.create_service (
        wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
        service_name           => l_service_qname);
      l_call := UTL_DBWS.create_call (
        service_handle => l_service,
        port_name      => l_port_qname,
        operation_name => l_operation_qname);
      l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
        <GetFieldsName xmlns="' || l_namespace || '">
        <user>' || in_username || '</user>
        <password>'|| in_password || '</password>
        </GetFieldsName>');
      l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
                                       request     => l_xmltype_in);
      UTL_DBWS.release_call (call_handle => l_call);
      UTL_DBWS.release_service (service_handle => l_service);
      l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
       dbms_output.put_line(l_return);     
      RETURN l_return;
    END;but when i run it i got message:
    ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
    regarding the line:
    l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
    request => l_xmltype_in);
    So , i deeply stuck here!
    my web service description is:
      <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    - <wsdl:types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
    - <s:element name="GetFieldsName">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetFieldsNameResponse">
    - <s:complexType>
    - <s:sequence>
    - <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
    - <s:complexType>
    - <s:sequence>
      <s:element ref="s:schema" />
      <s:any />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetMSG_ByUser_Not_Readed">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetMSG_ByUser_Not_ReadedResponse">
    - <s:complexType>
    - <s:sequence>
    - <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
    - <s:complexType>
    - <s:sequence>
      <s:element ref="s:schema" />
      <s:any />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:schema>
      </wsdl:types>
    - <wsdl:message name="GetFieldsNameSoapIn">
      <wsdl:part name="parameters" element="tns:GetFieldsName" />
      </wsdl:message>
    - <wsdl:message name="GetFieldsNameSoapOut">
      <wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
      </wsdl:message>
    - <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
      <wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
      </wsdl:message>
    - <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
      <wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
      </wsdl:message>
    - <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
      <wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
      </wsdl:message>
    - <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
      <wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
      </wsdl:message>
    - <wsdl:portType name="ServiceGetpublisherTableSoap">
    - <wsdl:operation name="GetFieldsName">
      <wsdl:input message="tns:GetFieldsNameSoapIn" />
      <wsdl:output message="tns:GetFieldsNameSoapOut" />
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
      <wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
      <wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="GetFieldsName">
      <soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="GetFieldsName">
      <soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="ServiceGetpublisherTable">
    - <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
      <soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
      </wsdl:port>
    - <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
      <soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
    supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
    hope you can help me with this.
    regards
    yair

  • NetStorage encountered an error while trying to access this

    Strange problem with NetStorage. If I log in to NetStorage on Server A I get a listing of my drives from my login script and have no problems accessing any of them. If I log in to Server B I also get a listing of my drives and can access all of them except for the drives on Server A. When I try to access them I get the following error: "NetStorage encountered an error while trying to access this location." Anyone have any ideas on what could be causing the problem?
    Here's the particulars:
    Server A
    OES2 sp3 on SLES 10
    Internal Network
    Server B
    OES2 sp1 on SLES 10
    DMZ Network
    At first I thought this might be a firewall port issue so I had my network guy open ports 80, 443, and 51080 from server B to server A. Didn't fix the problem.
    I have been searching the forums for an answer but, have not found one that helps for this situation. Thanks in advance for your help.

    Originally Posted by mtracy
    Strange problem with NetStorage. If I log in to NetStorage on Server A I get a listing of my drives from my login script and have no problems accessing any of them. If I log in to Server B I also get a listing of my drives and can access all of them except for the drives on Server A. When I try to access them I get the following error: "NetStorage encountered an error while trying to access this location." Anyone have any ideas on what could be causing the problem?
    Here's the particulars:
    Server A
    OES2 sp3 on SLES 10
    Internal Network
    Server B
    OES2 sp1 on SLES 10
    DMZ Network
    At first I thought this might be a firewall port issue so I had my network guy open ports 80, 443, and 51080 from server B to server A. Didn't fix the problem.
    I have been searching the forums for an answer but, have not found one that helps for this situation. Thanks in advance for your help.
    So you have NetStorage installed on both Server A and B and if you log in to NetStorage on Server A you can access storage hosted by both Server A and B but if you log in to NetStorage on Server B you can only access storage on Server B?
    One obvious comment is that Server B is running an old and now unsupported version of OES2 - the only version of OES2 now supported is OES2 SP3 on SLES10 SP4. Theoretically that shouldn't make a difference but I know that whilst NetStorage may not have visibly changed much over OES versions it has received some bug fixes along the way.
    Your comment about firewalls leads me to ask whether that implies you're blocking all the other ports between the two servers? NetStorage uses the XTier framework which in turn uses NCP to access remote servers. NCP uses UDP port 524.
    HTH.

  • "error while trying to access the service"

    I am trying to convert a pdf file to an excel file.  I get a completely unhelpful message that says  "error while trying to access the service" .
    What does this mean and how do i fix it?

    Hi sd433m,
    Thank you for posting on the Adobe forums. If you are already subscribed to the service, kindly try the steps mentioned below.
    1) Open Adobe Reader  Edit>preferences
    2) Go to Adobe Online services>change the email address to the one you have subscribed the service with
    3) Go to identity> change the email address there as well
    4) Click OK
    5) Restart the Adobe Reader and try to access the service again.
    If you have not subscribed to the service please do that as, we do not offer trial for Create PDF.
    Thanks,
    Vikrantt Singh

  • EDA Error while trying to access the personal details.

    Hi All,
    A new user(employee) is assigned with EDA responsibility to view/update his personal details and bank details.
    The user is able to view & update the bank details. But he is not able to open the personal details page. He is getting the following error while trying to access the personal detail link.
    HR_BASIC_DETAILS_WEB.GET_READ_ONLY_INFORAMTION: ORA-20002: 3123: Duplicate attribute 'DISPLAY_MARITAL_STATUS' could not be created for item 'HRSSA/28012061'.
    All users except the new user, dont have this issue.
    Oracle Application Version : 11.5.9
    Could someone help me on this.

    Hi Girish,
    Do you find out the solution to this issue? We having a similar issue with our Enterprise Portal using Apache and Siteminder Agent?

  • I keep getting an error while trying to access the service

    I keep getting an error while trying to access the service

    Can you try to use ExportPDF directly on the website https://cloud.acrobat.com/exportpdf
    [topic moved to ExportPDF forum]

  • Error while loading Reported Financial Data from Data Stream

    Hi Guys,
    I'm facing the following error while loading Reported Financial Data from Data Stream:
    Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
    The message appears in Target Data.  Item is not filled in almost 50% of the target data records and the error message appears.
    Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown.  When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data.  Item is not filled up, hence causing the error.
    For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign.  When it is posted as negative / Credit in the source data, it is not properly written to the target.
    Should I need to define any breakdown category for these items?  I think there's something wrong with the Item definitions OR I'm missing something....
    I would highly appreciate your quick assistance in this.
    Kind regards,
    Amir

    Found the answer with OSS Note: 642591..... 
    Thanks

  • Error while uploading HR master data from inQuality server

    Hi, Expert. While uploading of MAster data from Developement to Quality by BDC. When program starts for Tcode PA40, selecting Hiring Action, it is goining to the Action Screen. Here while taking the position from HR template, it gives error as Position is not in Table T428B. Payroll area on the date (Date of original hiring, of the person) it is taking DM as defalt in place of our created Area and terminating. When i am trying entering the data manually, it is giving same error for Position. I am not able to upload the data. Kindly help me by suggesting me the correct sequence and steps for uploading the data. Correct answer will be provided with STARSSSSSS **. Regds Punit.

    Have all your configurations been transported to Quality?
    Have you created the positions before initiating BDC for Hiring?
    Check Feature ABKRS in Quality. Is this same as in Development?
    Is your BDC running OK in Development?
    Regards,

  • MSS error while trying to access Adobe forms

    Hi all
    We are using EP 7 sp14. Delpoyed ESS/MSS BP SP 14. while trying to access certain functionalities in MSS which make use if standerd Adobe interactive forme through portal its coming up with the following error.
    com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
    I had done few settings in Visual Admin in
    1. server >services>web services security>web services clients>sap.com>tcwdpdfobject>com.sap.tc.webdynpro.adsproxy.Adsproxy*configPort_Document.
    2. In default URL gave : http://portalserver:port/AdobeDocumentServices/Config
    3. Authentication:Basic Authentication : gave username:ADSUSERpwd which is set in the backend.
    4. In Deploy stopped and started the application.
    Also in Destinations -> Created a new HTTP and set the URL pointing to the backend.
    Is there any additional configuration to be set on the Portal side.
    Regards,
    Sasha.

    Got corrected with changing data-type for a property in the definition file.

Maybe you are looking for

  • Creative Cloud Desktop konnte nicht installiert werden.

    Hallo, nachdem ich über die Google Suche, das "äußerst anwenderfreundliche" Supportsystem von Adobe immer nur auf den selben Workflow stoße, stelle ich hier mal meine Frage gesondert in der Hoffnung auf Hilfe. bei der Aktualisierung des CC-Desktops l

  • Emptying Trash Creates a Weird File

    Hi, For the past few days, every time I empty the trash a file gets created in the trash and here are the details when clicking on it: Name: ␀␀␀õ␀␀.␀␀ Type: Alias Size: 0 Ko Created: -- Modified: -- Now, the weirdest thing is that I can't delete it.

  • SAP Implementation in cement industry

    Hi, This is my second implementation in cement vertical.In earlier implementation I went with repetitive with QM.Please can you justify which will be the best suitable for cement ,REM or PP-PI.with reasons.  Regards, Manoj

  • Droid Eris won't activate?

    I just bought a Droid Eris off of ebay with a clean ESN. I was able to successfully activate it online, but then I call *228 and it activates. Then I try to make an actual call and it tells me my "mobile number is either not active or invalid." Why?

  • Embedding fonts in Flash 8?

    Hi, I have a Flash file and it uses Mac fonts, however, I work much better using Windows. I'd like to do my Flash development on a Windows machine, but I need to use the Mac fonts. Say buying these fonts for Windows is not an option...can I embed a f