Error while trying to access repository from Application Explorer

Hi All,
I am trying to access the targets which I had previously created from AE. Everything was working fine. When I tried running iwae.sh script and open the target from AE it throws below error today.
com.iwaysoftware.iwrepository.RepositoryException
at com.iwaysoftware.iwrepository.xml.XMLRepository.end(XMLRepository.java:272)
at com.iwaysoftware.iwrepository.xml.file.FileRepository.end(FileRepository.java:436)
at com.iwaysoftware.iwrepository.xml.XMLQuery.executeQuery(XMLQuery.java:863)
at com.iwaysoftware.af.container.IWAFRepositoryOP.getConfigs(IWAFRepositoryOP.java:167)
at com.iwaysoftware.af.container.IWAFRepositoryStorage.listConfigurations(IWAFRepositoryStorage.java:215)
at com.iwaysoftware.af.container.ChannelManager.listConfigurations(ChannelManager.java:100)
at com.iwaysoftware.af.container.IWAFContainer.listChannelConfigurations(IWAFContainer.java:360)
at com.iwaysoftware.af.container.AEManager.buildChannelList(AEManager.java:252)
Not sure what has changed? Is this a corruption with the repository.xml file ? Is there any way to get around this error.
Regards
Subhankar

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

Similar Messages

  • Error while trying to access dashboards from EPM

    Hi
    We integrated OBIEE 10.1.3.4 with EPM 11.2 and when we are trying to access dashboards from EPM we are facing the following error : "Invalid or could not find module configuration."
    Please , help us in solving the above issue.
    Thanks.

    Hi all,
    The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
    In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
    In that case, you have to:
    1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
    2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
    This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
    Best regards,
    Rudolf Hennecke
    SAP NetWeaver RIG BI

  • Error while trying to access data from virtual provider - Technical Content

    Hi,
      I am trying to install the new BI 2004s technical content.  I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error:
    Error reading the data of InfoProvider 0TCT_VC11
    There is still no data source assigned to VirtualProvider 0TCT_VC11
    The virtual providers are of type "virtual provider based on DTP"  since standard technical content didnt have any DTPs for the VC cubes I tried to create some direct access DTPs based on datasources 0TCT_DS11 but there also getting error:
    Source doesnt support direct access
    I saw the type for datasource 0TCT_DS11 and its using SAP SAPI and not direct access and couldnt change the type actually the same datasource is also used by cube 0TCT_C11 so changing the type probably wouldnt have been a good idea.
    I found the following notes 996735 and implemented its change...but no use...
    we are on SP10 and content 7.03 SP2.  Can anybody please help??

    Hi all,
    The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
    In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
    In that case, you have to:
    1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
    2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
    This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
    Best regards,
    Rudolf Hennecke
    SAP NetWeaver RIG BI

  • Error while trying to copy template from another application

    Hi,
    I am getting this error while trying to copy template from another application:
    report error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    This report is located here:
    Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
    best regards,

    It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
    Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
    The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
    I would just as a matter of course reset the TC to factory and redo its setup.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
    Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
    No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

  • EDA Error while trying to access the personal details.

    Hi All,
    A new user(employee) is assigned with EDA responsibility to view/update his personal details and bank details.
    The user is able to view & update the bank details. But he is not able to open the personal details page. He is getting the following error while trying to access the personal detail link.
    HR_BASIC_DETAILS_WEB.GET_READ_ONLY_INFORAMTION: ORA-20002: 3123: Duplicate attribute 'DISPLAY_MARITAL_STATUS' could not be created for item 'HRSSA/28012061'.
    All users except the new user, dont have this issue.
    Oracle Application Version : 11.5.9
    Could someone help me on this.

    Hi Girish,
    Do you find out the solution to this issue? We having a similar issue with our Enterprise Portal using Apache and Siteminder Agent?

  • NetStorage encountered an error while trying to access this

    Strange problem with NetStorage. If I log in to NetStorage on Server A I get a listing of my drives from my login script and have no problems accessing any of them. If I log in to Server B I also get a listing of my drives and can access all of them except for the drives on Server A. When I try to access them I get the following error: "NetStorage encountered an error while trying to access this location." Anyone have any ideas on what could be causing the problem?
    Here's the particulars:
    Server A
    OES2 sp3 on SLES 10
    Internal Network
    Server B
    OES2 sp1 on SLES 10
    DMZ Network
    At first I thought this might be a firewall port issue so I had my network guy open ports 80, 443, and 51080 from server B to server A. Didn't fix the problem.
    I have been searching the forums for an answer but, have not found one that helps for this situation. Thanks in advance for your help.

    Originally Posted by mtracy
    Strange problem with NetStorage. If I log in to NetStorage on Server A I get a listing of my drives from my login script and have no problems accessing any of them. If I log in to Server B I also get a listing of my drives and can access all of them except for the drives on Server A. When I try to access them I get the following error: "NetStorage encountered an error while trying to access this location." Anyone have any ideas on what could be causing the problem?
    Here's the particulars:
    Server A
    OES2 sp3 on SLES 10
    Internal Network
    Server B
    OES2 sp1 on SLES 10
    DMZ Network
    At first I thought this might be a firewall port issue so I had my network guy open ports 80, 443, and 51080 from server B to server A. Didn't fix the problem.
    I have been searching the forums for an answer but, have not found one that helps for this situation. Thanks in advance for your help.
    So you have NetStorage installed on both Server A and B and if you log in to NetStorage on Server A you can access storage hosted by both Server A and B but if you log in to NetStorage on Server B you can only access storage on Server B?
    One obvious comment is that Server B is running an old and now unsupported version of OES2 - the only version of OES2 now supported is OES2 SP3 on SLES10 SP4. Theoretically that shouldn't make a difference but I know that whilst NetStorage may not have visibly changed much over OES versions it has received some bug fixes along the way.
    Your comment about firewalls leads me to ask whether that implies you're blocking all the other ports between the two servers? NetStorage uses the XTier framework which in turn uses NCP to access remote servers. NCP uses UDP port 524.
    HTH.

  • "error while trying to access the service"

    I am trying to convert a pdf file to an excel file.  I get a completely unhelpful message that says  "error while trying to access the service" .
    What does this mean and how do i fix it?

    Hi sd433m,
    Thank you for posting on the Adobe forums. If you are already subscribed to the service, kindly try the steps mentioned below.
    1) Open Adobe Reader  Edit>preferences
    2) Go to Adobe Online services>change the email address to the one you have subscribed the service with
    3) Go to identity> change the email address there as well
    4) Click OK
    5) Restart the Adobe Reader and try to access the service again.
    If you have not subscribed to the service please do that as, we do not offer trial for Create PDF.
    Thanks,
    Vikrantt Singh

  • I keep getting an error while trying to access the service

    I keep getting an error while trying to access the service

    Can you try to use ExportPDF directly on the website https://cloud.acrobat.com/exportpdf
    [topic moved to ExportPDF forum]

  • MSS error while trying to access Adobe forms

    Hi all
    We are using EP 7 sp14. Delpoyed ESS/MSS BP SP 14. while trying to access certain functionalities in MSS which make use if standerd Adobe interactive forme through portal its coming up with the following error.
    com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
    I had done few settings in Visual Admin in
    1. server >services>web services security>web services clients>sap.com>tcwdpdfobject>com.sap.tc.webdynpro.adsproxy.Adsproxy*configPort_Document.
    2. In default URL gave : http://portalserver:port/AdobeDocumentServices/Config
    3. Authentication:Basic Authentication : gave username:ADSUSERpwd which is set in the backend.
    4. In Deploy stopped and started the application.
    Also in Destinations -> Created a new HTTP and set the URL pointing to the backend.
    Is there any additional configuration to be set on the Portal side.
    Regards,
    Sasha.

    Got corrected with changing data-type for a property in the definition file.

  • Cisco WAAS WAE-674 - Slow response in IE-7 PC's while trying to access the SAP application through cisco WEA

    Hi,
    From location A when we are trying to access the SAP application in location B  through WAE-674 via internet Explorer there is a slow response in IE-7 PC's compare to IE-8 PC's,But when we try without WAE-674 the response is normal.
    We also found that optimization in location A WAAS device as 70-90% but still users are facing slowness while opening the Webpage.
    Please suggest how to address the problem ASAP.
    Thanks & Regards,
    P.Ramkumar

    I would suggest that you open a case with the tac to look at this. Matthew

  • Error while trying to retrieve data from BW BEx query

    The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
    In BEx report there is a limitation but is it also a limitation in Webi report.
    Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
    A database error occured. The database error text is: The MDX query SELECT  { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

    Hi,
    That warning / error message will be coming from the MDX interface on the BW server.  It does not originate from BOBJ.
    This question would be better asked to support component BW-BEX-OT-MDX
    Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
    Regards,
    Henry

  • Error while trying to pick message from weblogic queue

    Hi,
    We are getting the following error while trying to connect to pick up a message from weblogic queue.
    We are suing oracle soa suite 10.1.3.1 and weblogic 8.1
    the bad part is that, this error is not documented anywhere and couldn't get much help on this.
    Would appreciate any suggestions / pointers on this.
    Let me know if any further information is required.
    invoke failed
    org.collaxa.thirdparty.apache.wsif.WSIFException: file:/E:/product/10.1.3.1/OracleAS_4/bpel/domains/default/tmp/.bpel_OTOCBPELProcess_1.0_78fcf080ec2bd7495aebfb5373e76116.tmp/readmsg.wsdl [ Consume_Message_ptt::Consume_Message(opaque) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
    Outbound interaction invoked with incorrect InteractionSpec.
    ; nested exception is:
    ORABPEL-12115
    ERRJMS_IX_WRONG_SPEC.
    Outbound interaction invoked with incorrect InteractionSpec.
    ---------------------------------------------------

    Hi!
    I am facing a similar issue, does someone have an idea ?
    <remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
    </part><part name="detail"><detail>null</detail>
    </part><part name="summary"><summary>file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_TestReceiveMessage_BPEL_1.0_e00fd88d454889b871183d0d92dc9f7d.tmp/plReceiveMessage.wsdl [ Consume_Message_ptt::Consume_Message(TestPushMessage_BPELProcessRequest) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
    Outbound interaction invoked with incorrect InteractionSpec.
    ; nested exception is:
         ORABPEL-12115
    ERRJMS_IX_WRONG_SPEC.
    Outbound interaction invoked with incorrect InteractionSpec.
    Please examine the log file to determine the problem.
    </summary>
    </part></remoteFault>
    Thanks,
    romain.

  • Error while trying to access a Repository Item thru ACC

    Hi,
    I was trying to access a Repository Item from ACC , I am getting this following error :
    Error reading list or array index from the database. This means the database table holding this property does not have sequential integers starting with 0 in its multi-column. This should only happen if the database table was modified directly (outside of Dynamo).
    java.lang.Exception
      at atg.adapter.gsa.ListTable.loadHelper(ListTable.java:190)
      at atg.adapter.gsa.ListTable.loadProperties(ListTable.java:97)
      at atg.adapter.gsa.GSAItemDescriptor.loadProperties(GSAItemDescriptor.java:5874)
      at atg.adapter.gsa.GSAItemDescriptor.loadProperty(GSAItemDescriptor.java:5986)
      at atg.adapter.gsa.GSAItem.getPersistentPropertyValue(GSAItem.java:1339)
      at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1232)
      at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1510)
      at atg.repository.RepositoryItemImpl.getPropertyValue(RepositoryItemImpl.java:151)
      at atg.repository.nucleus.RepositoryItemPropertyMapper.getPropertyValue(RepositoryItemPropertyMapper.java:151)
      at atg.beans.DynamicBeans.getPropertyValue(DynamicBeans.java:333)
      at atg.beans.DynamicBeanState.initializeFrom(DynamicBeanState.java:152)
      at atg.beans.DynamicBeanState.<init>(DynamicBeanState.java:122)
      at atg.ui.repository.model.RepositoryItemState.<init>(RepositoryItemState.java:428)
      at atg.ui.repository.model.RepositoryAgentImpl.createRepositoryItemState(RepositoryAgentImpl.java:2934)
      at atg.ui.repository.model.RepositoryAgentImpl.getRepositoryItem(RepositoryAgentImpl.java:3901)
      at atg.ui.repository.model.RepositoryAgentImpl.getRepositoryItem(RepositoryAgentImpl.java:1225)
      at atg.ui.repository.model.RepositoryAgentImpl.getCompressedRepositoryItem(RepositoryAgentImpl.java:1251)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at atg.security.proxy.UserSessionProxy$SessionSkeletonHandler.invoke(UserSessionProxy.java:273)
      at atg.rmi.context.ContextualSkeletonImpl.invoke(ContextualSkeletonImpl.java:127)
      at sun.reflect.GeneratedMethodAccessor401.invoke(Unknown Source)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:303)
      at sun.rmi.transport.Transport$1.run(Transport.java:159)
      at java.security.AccessController.doPrivileged(Native Method)
      at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
      at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
      at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
      at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
      at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:895)
      at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:918)
      at java.lang.Thread.run(Thread.java:662)

    Got corrected with changing data-type for a property in the definition file.

  • Error while trying to access WebService using WSIF

    Hi All,
    I am a new developer to WebServices. I read up information on how to create the WSDL and stubs using JDev 10g (10.1.2) using the wsa.jar that ships with the download. After creating my WSDL and the necessary proxies, when I try to run my client application (which runs in the same covatiner, standalone OC4j), I get the below error :
    06/09/29 13:42:21 org.apache.wsif.WSIFException: [email protected] : Could not invoke 'getOrderList'; nested exception is:
    org.apache.wsif.WSIFException: Error while determining signature of method getOrderList : The meta information is not consistent.; nested exception is:
    org.apache.wsif.WSIFException: parameters
    06/09/29 13:42:21 at org.apache.wsif.providers.ejb.WSIFOperation_EJB.executeRequestResponseOperation(WSIFOperation_EJB.java:1259)
    06/09/29 13:42:21 at org.apache.wsif.base.WSIFClientProxy.invoke(WSIFClientProxy.java:339)
    06/09/29 13:42:21 at $Proxy3.getOrderList(Unknown Source)
    I am trying to expose a Stateless Session EJB as a WebService, which contains a method called getOrderList(). This method returns an array of a complex type (Java Bean).
    I am, however, able to succesfully access the WebService using the SOAP/HTTP protocol.
    My client code is as follows:
    WSIFServiceFactory factory = WSIFServiceFactory.newInstance();
    WSIFService service = factory.getService("<path to wsdl>", null, null, "http://sample.com/", "OrderService");
    orderService = (OrderService) service.getStub("WsifEjb", OrderService.class);
    Not sure what am I missing here. If any further information is required in order to resolve this, please let me know.
    Thanks,

    You are trying to get 2 databases connected... so, you need to insure that FDEV can find and connect to ABCD.
    So, from your FDEV database server, you can do 2 things (from command prompt):
    1* tnsping ABCD (this will validate that the entry exists in your tnsnames.ora on your FDEV server, and that a valid listener can be found on remote server)
    when above command succeeds:
    2* sqlplus apps/[email protected];
    when you have established the connection, then you are SURE that your can connect ABCD database from FDEV database server. It will also validate the username / password combination, create session privilige, account not locked, etc.....
    Please check the above, and post here the results.
    HTH,
    Thierry

  • Error while connecting to Access Database from Oracle

    Dear All,
    I'm trying to connect Oracle 9i to Access Database.
    but im getting the below error while executing query.
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    NCRO: Failed to make RSLV connection
    ORA-02063: preceding 2 lines from MYSQLi did the following thing through to connect the database.
    1) First i made odbc driver called ODBC1
    2) I create the following file on oracle server C:\oracle\ora9I\hs\admin\initodbc1.ora
    i edit the below thing in initodbc1.ora
    HS_FDS_CONNECT_INFO =ODBC1
    HS_FDS_TRACE_LEVEL = ON3) I made some changes in sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= NONE
    before it was *NTS*4) Below are the entries in tnsnames.ora i changed the port from 1521 to 1522 cos 1521 already exists.
    ODBC1.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = ODBC1)
    ODBC1.WORLD =
      (DESCRIPTION =
         (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.251) (PORT = 1522)
      (CONNECT_DATA =
          (SID = ODBC1)
      (HS=OK)
    )5) Listener file code
    ODBC1 =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = extproc)
        (SID_DESC =
          (GLOBAL_DBNAME = orcl)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = orcl)
         (SID_DESC =
          (PROGRAM = hsodbc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = ODBC1)
      )6) after that i created
    SQL> CREATE DATABASE LINK MYSQL CONNECT TO XTRACK IDENTIFIED BY XTRACK USING 'ODBC1.WORLD'
    Database link created.7) Listener Status
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 04-MAR-2012 21:26:16
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                04-MAR-2012 20:52:33
    Uptime                    0 days 0 hr. 33 min. 44 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "ODBC1" has 1 instance(s).
      Instance "ODBC1", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 2 instance(s).
      Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
      Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
      Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfullyi did exactly what documentation says and it will not through any error but atlast when i try to access the access database tables it give me the below error
    SELECT * FROM [email protected]
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    NCRO: Failed to make RSLV connection
    ORA-02063: preceding 2 lines from MYSQLi'm using Oracle9i Enterprise Edition Release 9.2.0.1.0 any help will appreciate.
    Regards
    Moazam
    Edited by: Moazam Shareef on Mar 4, 2012 10:25 AM

    first of all thanks for your support Mr. Kgronau
    I did what u said but still its giving me below error.
    SQL> SELECT * FROM [email protected]
      2  ;
    SELECT * FROM [email protected]
    ERROR at line 1:
    ORA-12154: TNS:could not resolve service namei re-check the service, and restart the listener as you said below are the logs could you help me to solve this issue plz.
    TNSNAMES.ORA
    # TNSNAMES.ORA Network Configuration File: C:\oracle\ora9I\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = orcl)
    ODBC1 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = ODBC1)
    INST1_HTTP.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = SHARED)
          (SERVICE_NAME = MODOSE)
          (PRESENTATION = http://HRService)
    EXTPROC_CONNECTION_DATA.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
        (CONNECT_DATA =
          (SID = PLSExtProc)
          (PRESENTATION = RO)
      )LISTENER.ORA
    # LISTENER.ORA Network Configuration File: C:\oracle\ora9I\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
    ODBC1 =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    SID_LIST_ODBC1 =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = ODBC1)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = hsodbc)
        (SID_DESC =
          (GLOBAL_DBNAME = ODBC1)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = ODBC1)
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = extproc)
        (SID_DESC =
          (GLOBAL_DBNAME = orcl)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = orcl)
      )then i restart both listener entries (ie lsnrctl start ODBC1 and lsnrctl start ) and both are running fine without any error below are the status.
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:42:09
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                05-MAR-2012 18:32:15
    Uptime                    0 days 0 hr. 9 min. 56 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 2 instance(s).
      Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
      Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
      Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfullyLISTENER.ORA ODBC1 status
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:41:52
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1522)))
    STATUS of the LISTENER
    Alias                     ODBC1
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                05-MAR-2012 18:32:08
    Uptime                    0 days 0 hr. 9 min. 46 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\odbc1.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1522)))
    Services Summary...
    Service "ODBC1" has 1 instance(s).
      Instance "ODBC1", status UNKNOWN, has 2 handler(s) for this service...
    The command completed successfullyWhere hope i'm near to retrive the access data.
    Regards
    Moazam

Maybe you are looking for

  • Help to create a webgis raster-java

    Hi, I'm trying to create a web gis in java for my first time and I'v a lot of problems. Can anyone help me? I searched en example for raster viewer or webgis, in java, with rasters opensource, but nothing, I haven't find it. I search this programs fo

  • Restoring after archive and install

    after using 'archive and install', what is the proper procedure for restoring applications, plugins, etc? 1. manually copy? 2. migration assistant? 3. reinstall using disks/installers?

  • ARD 2.2 Admin Crashes When Scanning Local Network

    Out of the blue, my ARD Admin application began to crash when scanning the Local Network. I deleted the application's preferences file (com.apple.RemoteDesktop.plist) and retried with the same results. Installed ARD admin application on a different m

  • Can I use RAW files in Premiere Pro on Mac?

    Help Please on Mac and Im on Mac and Do Time Lapse , I use Lightroom to proceDo Time Lapse , I use Lightroom to process and Batch Process, Is there any way to use Raw files from Lightroom to Premier Pro to make my Time Lapse, I saw there was a Plug i

  • GDS Performance in a Cluster - Database or Shared File Folder

    Has anyone seen any significant performance differences between Windows ES4 clusters using the DB GDS and File Folder GDS?