Error while trying to sync audio and MIDI, sample rate 39100 recognised??

When I press record a message appears saying 'error while trying to syncronise audio and MIDI, sample rate 39100 recognised. Check conflict between garage band and external device. I'm using a Behringer UMC-202 interface. The inputs are selected as the device but no audio is present either.

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

Similar Messages

Error message trying to synchronise audio and midi sample rate 42463

I have a Rode Podcaster mic that is terrific. It has been working fine in GB. suddenly I am getting this when I try to record my podcast:
'Error message trying to synchronise audio and midi sample rate 42463 recognised. Check conflict between Garageband and external device'
Has anyone experienced this before? How do I resolve it? I'm still using my Version 6.0.5.
Apple, is this a way of forcing me to upgrade to V10?

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

"Error while trying to sync Audio and Midi"

"Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
Also, I have tried reseting the 828 to factory default and that does not help.
Jonathan Jenkins

Hi,
I solved my own problem by resetting the factory presets:
Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
Disconnect the firewire cable from the 828mkII
Press the Setup knob
Turn the Setup knob all the way to the right
Press the Select knob
Press the Value knob
Power off the interface and plug the firewire cable back in
Power the interface back on
The same steps can be followed to restore the Factory Default Settings on a Traveler.
-Robert

In Logic Pro 9.8.1 I get an "error while trying to sync Audio and MIDI"

I am using a MAC OS X 2.66 GHz Intel Core 2 Duo
and memory 4 GB 1067 MHz DDR3.
I am going thru an Apogee Ensemble
and 2 other external units, an MCU Pro Universal Control surface
and an Axiom 25.
The problem is this was working fine and now I cannot
get audio. The signals are there when I load a Logic project,
just no actual audio.

Craigius wrote:
I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
Have tried the resolutions recommended and I basically have all signals in projects with no audio.
Care to share?
Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

How can I fix an -"Error while trying to sync Audio and Midi problem?

I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
Have tried the resolutions recommended and I basically have all signals in projects with no audio.

Craigius wrote:
I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
Have tried the resolutions recommended and I basically have all signals in projects with no audio.
Care to share?
Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

Error Message "Error while trying to sync Audio and Midi"

I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
Jonathan Jenkins

Sounds like the MOTU828 needs a reset, the problems you describe can almost always be fixed by a reset.
-Unplug the firewire
-press the button "setup", turn full right until
"factory default"
- push select
- confirm with "value"
- plug back firewire
pancentyer-

GarageBand: Error while trying to synchronize Audio and MIDI.

This error recently started popping up for me while using garageband.
GarageBand: Error while trying to synchronize Audio and Midi
Sample rate xxxxxx recognized
Check conflict between garageband and external device
When I use garageband, my input and output are usually set to my scarlett 2i2 interface and I've never received the synchronizing error before today. I am not using any Midi.
I've checked the Audio Midi Setup tool to make sure that my format is at 44100.0Hz and have set the "sound" in system preferences to use my scarlett 2i2 interface for input and built-in system for output.
Can anyone help me out with why i'm receiving this error?

Good grief! I'm on a Mac OS X and was having this same problem. All these discussions about so much technical jargon just had me exhausted ... not only did I not understand what was being referred to, but I couldn't imagine how to do what was being said.
Here's what got me straight:
1. Go to System Preferences and click on Sound
2. Click on Input and select your USB mic (or whatever you're using)
3. Click on Output and select Internal Speakers
Done. No more problem with Garageband!

Re: ERROR while trying to synchronize Audio and MIDI

Hi Guys/Gals
A bit of a strange one. Yes, I have posted a similar question concerning my trusted 2.7ghz G5 PPC and my Digidesign 003R which it turned out that the Digi's FW ports were to blame.
New issue. I have just completed an install on a client's machine, here's it's specs etc:
Hardware:
iMac 2.8Ghz Duo Core Intel, 4Gb ram, 500Gb HD etc (the custom top end before last week's upgrade) arrived last week. Running Leopard 10.5.2 and has all the latest updates. (firmware/software)
Apogee Ensemble (with newest firmware update/upgrade)
Iomega ULTRAMAX HARD DRIVE 1TB USB 2.0/FIREWIRE® 400/800 (sorry, copied from their site)
M-Audio Axiom 49 USB Midi controller/keyboard
Software:
Logic Pro 8 (latest 8.0.1) All standard plugs/samples, no third parties at all, just 100% Apple install.
Reason 4 (latest 4.0.1)
I reformatted the built-in hd to two partitions of equal size, one for the OS and one for whatever. I formated the external terrabyte into two partitions also of equal size, non are journalized, all are GUI partitions. I copied the LP 8 demos to both the internal "spare" partition and to the primary "Audio1" partition of the external drive. The Iomega HD is connected via the 800FW port and the Apogee Ensemble is connected via the 400FW port (the iMac has one of each). If I play any of the demo songs from the internal partition, they play perfectly, if I play them off the external Iomega partitions (either) within 8 bars I get:
"Error while trying to synchronize Audio and MIDI
Sample Rate 45946 recognized.
Check conflict between Logic Pro and external device."
As I said, any demo played back from the internal drives absolutely perfectly..... Any ideas?
Cheers!!
Bobs

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

Pop up saying error while trying to sync audi and midi

HELP! is there anyone who is experiencing or has experienced an error pop up saying error while trying to sync audio and midi in your logic pro8? it's doing it on every song I pull up now. I've tried buffering, reloading, Help? all was fine the night before.
Sincere, The Silver Conductor

Check the clock source on your audio interface if you're using one. It should be set to internal. What's your setup?

Error while trying to synchronize Audio and MIDI-HELP PLZ!!!

Hi there, i have just started gettin the message wheneva i try and play audio/audio instr:
'Error while thrying to synchronize Audio and MIDI-Sample Rate 41222 recognized. Check conflict between Logic Pro and external device'
I get lots of high frequency bleeps n squeals thru the speakers. I am runing Motu 828mk2 and have only started gettin the problem reently its been fine before. The Motu has not problem playing audio in iTunes etc but as soon i open Logic it goes funny.

Hi there, i have just started gettin the message
wheneva i try and play audio/audio instr:
'Error while thrying to synchronize Audio and
MIDI-Sample Rate 41222 recognized. Check conflict
between Logic Pro and external device'
I get lots of high frequency bleeps n squeals thru
the speakers. I am runing Motu 828mk2 and have only
started gettin the problem reently its been fine
before. The Motu has not problem playing audio in
iTunes etc but as soon i open Logic it goes
funny.
Sounds like you need the infamous MOTU "Reset".
(the bleeps & squeals is a give away)
Follow these steps to restore the 828mkII to Factory Default Settings.
-Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable back
in
-Power the interface back on
Pancenter-

"Error While Trying To Synchronise Audio And Midi"...non-tempo event found

"Error While Trying To Synchronise Audio And Midi"...non-tempo event found
now when I shutdown Logic And relaunch the Project, the notes hang and "WHAT THE FRIIGIN"
(this was a bug way back when Logic7 was first released)
this is bad!
SvK

Thanks Steven.
big help. In our session we keep getting this problem where the song counter stops, the music keeps playing and we get an error message saying:
Non Tempo-Event found in Sync Reference
We looked in the tempo list and somehow there was a tempo event of 0.00 tempo in there.
We deleted it, got the same error message, but the prob seems to be fixed.
Apple, please fix this!
Thanks
Felix

"error while trying to synchronize Audio and MIDI"

Hello All,
Just got Logic 8... installed (as upgrade from 7)
I keep (consistantly) getting this:
"error while trying to synchronize Audio and MIDI" when in play or record mode... has anyone any ideas regarding a 'fix' or maybe even to point out stupidity on my part re settings; I'm open to comments here and would obviously love to get this fixed/sorted out.
System is basically: G5 Dual 1.8/OS 10.4.10/MOTU 828 Mk2
Thanks in advance.

Hi,
I first did what the manual was telling me but that made no difference as the sync would drop within 5 to 15 bars... very frustrating.
Since my original posting I have spoken with MOTU regarding this Audio/MIDI sync problem. There is evidently a simple reset that needs to be done (that is if like me you are using a MOTU 828 Mk2 interface), you have to toggle through both digital input and output settings in the Audio Control Panel. The problem then goes away.
I hope that is helpful. I think that this probably is relevant to all MOTU interfaces, or is at least worth trying if you are having this problem... maybe other manufacturers too... ?
Cheers, Kick

Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device.

Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device."
(Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
There's also a sound of static.
The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
Tony

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

Error while trying to synchronize Audio and MIDI. plz help i cant hear anything

plz help me i cant hear nothing and its says: Error while trying to synchronize Audio and MIDI.
Sample Rate 38536 recognized.
Check conflict between Logic Pro X and external device. ???????? PLZ HELP

It means you are overtaxing the CPU, likely with just one (3rd party-)software instrument plugin. Ignore the word "external", in this context it often means "3rd party plugin".
So what synth is it? Since you're Dutch, it's probably one of the trancy dancy synths, such as Albino, Diva, Sylenth or Massive... I could be wrong though...
The best way to avoid this message is to Freeze the track with the guilty synner - however, a frozen track cannot be edited, so if that is a problem, you will have to make the synth itself run lighter, which can be achieved by turning of internal effects that are ON the synth itself, especially reverb.
http://help.apple.com/logicpro/mac/10/#lgcpf1cbfd51

Error while trying to synchronise audio and midi

Hi
Logic worked all day and suddenly start giving this message:
error while trying to synchronise audio and midi.
Nothing was changed and we also have no sound.
We don't have any midi device, its just the G5 and Logic installed.
Any idea how to solve this issue.
Jeanne

Howdo
Someone else has been having this problem and I've tried to help 'cos it used to happen to me too. Try adjusting your I/O buffer level in your Logic Audio Driver preferences - raise it a bit higher and the problem should go away. Problem is you get more latency. (I'm assuming it's set lower than 512, but not knowing your audio hardware... and your not using internal audio are you???)

Error while trying to sync audio and MIDI, sample rate 39100 recognised??

Similar Messages

Maybe you are looking for