Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Similar Messages

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while loading data from PSA to DSO

Hi,
How to identify the erroneous records in DSO?
While loading the data from PSA to DSO through Process chains we are facing the error says:
"Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
There is no error records in PSA but it seems some invalid characters exists.
Could you please help us how to find the error records in DSO and how to correct it.

Hi,
These are errors BRAIN290 & RSDRO302.
The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
Please review Note 173241 and the document mentioned within.
This shows what characters are not allowed in BW characteristic values.
You should check if the character is allowed, and then you can solve the problem in one of the following ways:
1) add this character to the "permitted character" list in RSKC as described in the note.
2) correct the value in the source system.
3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
These are the usual ways to solve this issue.
Rgds,
Colum

Error while loading data from PSA to Infoobject through DTP(URGENT)

Hi-
I am running into an issue while loading the data from PSA to Infoobject.
It says
Data Package 1 : error during processing.
Updating Attributes for Infoobject
Error in substep
Process Terminated
Please let me know ur solution as this is very urgent....

Data Package 1 : error during processing.
This is the error when your flat file is opened at the time of scheduling. Pls close your flat file, will upload correctly.
Let me know if you have any further query.

Error while loading data from PSA to DSO using DTP

Hi,
I have a Unique aplha numeric identifier of type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
"An error occurred while executing a transformation rule:
The exact error message is
Overflow converting from ' '
The error was triggered at the following point in the program:
GP4JJHUI6HD7NYAK6MVCDY4A01V 425
System response
Processing the data record has been terminated"
Any idea how I can resolve this....
Thanks

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

Error while loading data from write optimized ODS to cube

Hi All,
I am loading data from a write optimized ODS to cube
I have done Generate Export Datasource
schedulled the info packge with 1 selection for full load
then it gave me following error in Transfer IDOCs & TRFC
Info IDOC 1: IDOC with errors added
Info IDOC 2: IDOC with errors added
Info IDOC 3: IDOC with errors added
Info IDOC 4: IDOC with errors added
Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
Processing below is green
shows update of 4 new records to Datapackage 1.
Please provide inputs for the resolution
Thanks & Regards,
Rashmi.

please let me know, What more details you need?
If I click F1 for error details i get following message
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
Thanks & Regards,
Rashmi.

Error while transferring Data from PSA to DSO

Hi all,
We had a requirement to load data into the DSO.We are extracting it from R3.
Problem is that while loading in PSA it is showing 1056 records ,But when we are trying to load it in DSO it is showing Transferred records as 1428 and added records as 1073.Please help ASAP!!!!!!!!

Hi,
the difference in records can be due to some changes happening in the transformation.
check your transformation from the DS to your DSO if it contains any start,end or update routines oe any other such thing.
Also check if there is one to one mapping from DS to DSO or if some fields in DS are not mapped to DSO.
Regards,
Dhanya

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Error While Deleting Data From ODS

Hi all,
We are getting short dump while deleting data from a perticular ODS.
Part of short dump is--
trigger Location of Runtime Error
   Program                                 SAPLRSAC
   Include                                 LRSACU75
   Row                                     535
   Module type                             (FUNCTION)
   Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
help is desperately required
Regards
Srini--

try to activate InfoSource and later delete data.
Check if all ODS related objects are consistent and active.
also pls attached the whole dump for more clarity if this does not work.

Error when i am loading data from PSA to ODS

hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
Jayavardhan

Hi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P

Error while updating data to infocube

Hi BW Gurus,
I am trying to update data from PSA to a non cumulative infocube. However I am getting the following two errors while doing so.
Here is the detail of the error in the details tab.
Record 11534 :Value 'ETFHU224681М2 ' (hex. '00450054004600480055003200320034003600380031041C00') of
Error 4 in the update.
I checked the PSA for the erroneous record and found that
FHU224681М2 is the value of the 0material field.

Hi..
Correcting the record from PSA is temporary solution depends on u r criticality....
Only Solution is to correct the record at source system level... Generally Material master data record is imp so just try to fix temporarily so that it vl not affect u r loads until it is corrected at Source System level..
Note: inform the problem to u r co-ordinator and try to correct it ASAP... and explain the temp solution(PSA correction)...
cheers..

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.

Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./

Error while updating data from PSA to ODS

Similar Messages

Maybe you are looking for