Error while updating the configuration files (MOB20003)

hi,
After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

Hi Somesh,
If i am not wrong, only a war file deployment is needed to make ipad work.
This happens with URL hitting directly on the Server.
If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
Regards,
Atul

Similar Messages

  • "An error occurred while updating the configuration"

    I recieved an Apple Airport Base Station in the mail today. I got it second hand, and I performed a hard-reset since I didn't have the password and stuff. I wanted to update it properly before I started using it.
    I have followed the guides in here point by point, but all I get when I am trying to connect with the AirPort Admin Utility is the error in the topic: "An error occurred while updating configuration".
    I've been surfing and googling for hours now, and can't seem to find the solution to this.
    The Base Station has a model no. M8440, and that's all I know about it. First I thought it was the Snow, then the Graphite and now I don't know. The reason I get confused is because I've read about all these different colored lights.
    Here's a description of my Base Station - in case someone recognized it, and can help me identify it:
    - It's one of those "UFO's"
    - It's all white, with a silver Apple-logo
    - It's got three ports: Modem, WAN and LAN
    - It's got three lights - ALL WHITE all the time.
    I've tried to download firmware - the last I tried was called AirPortFW4.0.9.img - but when I try to run it by clicking it I get the error "The destination folder "AirPort whatever firmware whatever" is on a locked volume.
    My computer is a 2,0 HGz MacBook Pro, and int the AirPort Admin Utility the Base Station is said to be V4.0 dev with IP 192.42.249.13 - so it seems to be hard-resat all right...
    Please folks...help me out!

    I've also encountered the same problem with an older dual ethernet airport.
    I first started having problems with the original one about 8 months ago, and after spending a ridiculous three hours on the phone with AppleCare they sent me out a refurbished replacement. That one worked fine for about 5 months, but then started dropping the signal again, before becoming "unfindable". I went through the same processes, (soft reset, then hard reset etc.) which sometimes solved the problem. I eventually I took it to an Apple Store and of course, it worked fine once I got there. Strange thing is, I took it home and it continued working without incident...for a month. When it happened again, I decided to forgo all the the diagnostic work and just take it back to the store. Sure enough, it fixed itself again, then broke again a few weeks later (now).
    Unfortunately, I just had knee surgery and can't get down there now, (which was getting ridiculous anyway), so I went through everything again for the first time on the MBP. I ended up getting the "An error occurred while updating the configuration" message, and after reading this thread started up the old TiBook. The reconfig worked on there, but it still isn't visible on either computer. In fact, it then becomes inaccesible even through LAN on the TiBook through either the AirPort Admin or the dropdown, though it did appear on the MBP via AirPort Admin. However, it says the software on the airport cannot be uploaded or changed due to out of date software on my computer, and suggests I go to apple.com/support to update my computer's software, which is already current. It does however say that I may be able to change the settings and so forth, which I was able to do. Unfortunately, it still does not show up anywhere else on either computer, no matter how much I tinker with the settings.
    Any ideas? I suppose I'll just stick with built-in ethernet till I am mobile again.
    MacBook Pro 15 Intel Duo Core 2.16GHz 2GB/100GB Serial ATA drive@7200rpm   Mac OS X (10.4.7)   '02 Titanium Powerbook G4 1GHz 1GB/60GB/Superdrive (currently awaiting a new hard drive)

  • Error while updating the content in workflow

    Hi,
    I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
    Content Server Request Failed
    Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
    at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
    at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.Service.doSubService(Service.java:3465)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
    at intradoc.server.Service.doCodeEx(Service.java:507)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
    at intradoc.server.Service.executeActions(Service.java:433)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
    at intradoc.server.Service.doRequest(Service.java:1707)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
    Please help to resolve.
    Thanks in advance
    Prasad

    I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
    Content Server Request Failed
    Unable to update the content item information for 'HO000128'.
    The content ID must be specified.
    Please help to resolve.
    Thanks in advance
    Prasad

  • Error while updating the plan in Enterprise link

    hi
    i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
    IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
         at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
         at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
         at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
         at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
         at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
         at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
         at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
         at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3A]
    Error during Message Receive operation.
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3B]
    Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
    Thanks in advance

    I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
    Content Server Request Failed
    Unable to update the content item information for 'HO000128'.
    The content ID must be specified.
    Please help to resolve.
    Thanks in advance
    Prasad

  • Error while loading the WSLD file

    Hi all
    I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
    Its an XI webservice, so i cannot view it from Webservice navigator.
    How could i find out that, the problem is with the Webservice or i am missing any thing
    Kindly help
    regards
    Deepu

    Hi
    I checked the log and i am getting the following exceptions
    1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
         at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
    Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
    2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
    3. java.lang.NullPointerException
         at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
    Is this any authorization problem
    regards
    Deepu

  • RFC_ERROR_SYSTEM_FAILURE error while  updating the sick leave in MSS

    Hi Guru ,
    We are  getting  RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
    Please tell how to resolve this .
    Dump part :
    Runtime Errors         MESSAGE_TYPE_X
    Error analysis
        Short text of error message:
        System error
        Long text of error message:
        Technical information about the message:
        Message class....... "HRTIM00BUFMSG"
        Number.............. 001
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    Information on where terminated
        Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
         "INITIALIZE".
        The main program was "SAPMSSY1 ".
        In the source code you have the termination point in line 55
        of the (Include) program "LHRTIM00_TMWBUFFERCB5".

    When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
          1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
          2. Have an ABAP programmer review where the RFC is failing on the Backend System
          3. Set up an External Breakpoint in the backend RFC. Step to do this:
                   a. Get the Backend UserID of a test portal user that is having this issue.
                   b. Ensure that test user has "Debug Display" access in the Backend System
                   c. Log into the Backend system, go to SE 37 and display your RFC
                   d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
                   e. Set an external breakpoint any where you want in the RFC.
                   f. Run the Leave request as the test user.
                   g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
      Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
    Regards,
    Tom

  • Get Error while update the User defined row table through DSK Code

    Hi experts,
    I have got an error while updating the user row defined table.
    Error is - "Invalid row"
    I have created one master table "@CBF_FARM " and Child table "@CBF_FAR1"
    First i inserted 5 record in the child table so in my my child table there are 5 Line id (1,2,3,4,5 one for each row).
    after that i delete 2 rows (3rd & 4th row) from child table now in my child table there are 3 rows( Line id 1, 2, 5). Please See attachment.
    Now i am updating  the last record of child table through Code  (Line id is 5)  from other form, then i got error  invalid row.
    Following Code used for updating the user defined child table.
      SAPbobsCOM.GeneralService oGeneralService1 = null;
                                    SAPbobsCOM.GeneralData oGeneralData1 = null;
                                    SAPbobsCOM.GeneralDataParams oGeneralParams1 = null;
                                    SAPbobsCOM.CompanyService sCmp1 = null;
                                    SAPbobsCOM.GeneralData oChild1 = null;
                                    SAPbobsCOM.GeneralDataCollection oChildren1 = null;
                                    sCmp1 = clsAddOn.LDNA_Company.GetCompanyService();
                                    oGeneralService1 = sCmp1.GetGeneralService("CBF_FARM");
                                    // Get UDO record
                                    oGeneralParams1 = ((SAPbobsCOM.GeneralDataParams)(oGeneralService1.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)));
                                    oGeneralParams1.SetProperty("Code", oForm.Items.Item("edtFarmCd").Specific.Value);
                                    oGeneralData1 = oGeneralService1.GetByParams(oGeneralParams1);
                                    // Add lines on UDO Child Table
                                    oChildren1 = oGeneralData1.Child("CBF_FAR1");
                                    // Create data for rows in the child table
                                    SAPbouiCOM.Item oItem = oForm.Items.Item("cmbShed");
                                    oCombo = oItem.Specific;
                                    string ShedCode = oCombo.Selected.Value;
                                    ldna_Rec = clsAddOn.LDNA_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                                    string strQuery1 = "select LineId from [@CBF_FAR1] where U_ShedCd = " + ShedCode;
                                    ldna_Rec.DoQuery(strQuery1);
                                    oChild1 = oChildren1.Item(ldna_Rec.Fields.Item("LineId").Value - 1);
                                    oChild1.SetProperty("U_Status", "Ready For Schedule");
                                    //Update the UDO Record
                                    oGeneralService1.Update(oGeneralData1);
    Please Help me it is an urgent requirement,
    -Regards
    Vikas

    hi.
    Error is - "Invalid row"
    Now i am updating  the last record of child table through Code  (Line id is 5)  from other form, then i got error  invalid row.
    As per my knowledge
    What i understood is you have 5 lines and you are going to be update 5th line
    am i correct..
    while u are updating the line in child table
    you have to consider like this..
    line number         u have to update like
    1                                        0
    2                                        1
    3                                        2
    4                                        3
    5                                        4
    which means in child table treat
    line 1  as 0
    line 2 as  1
    line 5 as 4
    If you want to update the line 5 u have to mention 4 th line

  • SWF error- while generating the flash files.

    Post Author: [email protected]
    CA Forum: Xcelsius and Live Office
    Hi, in the old forum I came across the folowing topic: SWF error- while generating the flash files.
    As I have the same problem, I would like to know the solution / answer / meaning please. What do I have to change in order to let in function properly again.
    Thanks anyone.
    Femke
    (The post is from 3/6/2007)
    The following error is generated upon generating the flash files Any insight???SWF error- while generating the flash files.--ErrorSWF Function Overflow. The generated SWF will not function correctly because data dependencies go beyond SWF limits.--
    OK -

    Post Author: Andres
    CA Forum: Xcelsius and Live Office
    Hello.
    I'm having the same problem. It appeared after I made use of many cells (a table of 10x200 cells) with formulas inside them.
    Before that, while I was making my tests and only used a few cells and the .XLF file was 4Mb, I had no problem. Now that the .XLF file is 8Mb I see this error appearing (in Spanish):
    "Error
    Desbordamiento de la función SWF. El archivo SWF generado no funcionará correctamente ya que las dependencias de datos superan los límites de SWF."
    Any idea of how this could be resolved (appart from using less data)?
    Thanks in advance.

  • Encountered error while updating the payment document

    Hi Guys,
    I encountered an error while updating the payment document of one of our bank account. See below error message:
    Error: Unable to lock the record. Cause: The record is being modified by another user
    thanks,
    gracie

    Hi Vikas,
    Repeat the changes you are trying to make one step at a time and make sure you click on update in both the series screen and the document numbers screen every time.
    I've faced this issue and doing this helped.
    Regards,
    Hamsa

  • Getting Error while Updating the ESB Default System

    Hi,
    We applied patch 7272722 and have upgraded the SOA Suite 10.1.3.1 to SOA Suite 10.1.3.4 on Windows (32 Bit).
    After upgrading , we are getting below error message while updating the Default System properties in ESB Console.
    An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.console.exception.ConsoleTransactionException: File repository not initialized.May be ESB bootstrap failed Please review ESB prameters for their correctness. at oracle.tip.esb.console.XMLConsoleManagerImpl.commit(XMLConsoleManagerImpl.java:2317) at oracle.tip.esb.console.XMLConsoleManagerImpl.updateSystemInRepository(XMLConsoleManagerImpl.java:882) at oracle.tip.esb.console.XMLConsoleManagerImpl.updateSystemFromElement(XMLConsoleManagerImpl.java:578) at oracle.tip.esb.console.XMLConsoleManagerImpl.updateSystem(XMLConsoleManagerImpl.java:556) at oracle.tip.esb.configuration.servlet.command.UpdateSystemCommand.execute(UpdateSystemCommand.java:61) at oracle.tip.esb.configuration.servlet.CommandServlet.doJob(CommandServlet.java:109) at oracle.tip.esb.configuration.servlet.CommandServlet.doPost(CommandServlet.java:76) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595) ".
    We are also deploying new BPEL process but they are also not displayed on ESB Console.
    Please let us know how we can resolve the error.
    Thanks
    Udit

    Dear Laxmi Narayan,
    This error would occur, if you miss Business Area/Section Code at the time of Invoice.
    The following thread should answer your query:
    Extended W/H Tax
    Regards,
    Naveen.

  • Error while updating the records through a DB link

    Hi ,
    I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
    Not Found
    The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
    Not Found
    The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
    Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
    Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
    Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
    GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
    ALIAS Varchar2 720 - - - - - -
    ACTIVE Varchar2 3 - - - - - -
    REGION Varchar2 300 - - - - -
    1 - 4
    Thanks & Regards,
    Ramu

    Hi Sangu,
    See if the following notes help you:
    Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
    Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
    Thanks &
    Best Regards,

  • Error while deploying the par file

    while deploying  an application in NWDS we are getting the error as"operation failed,please make sure that the server is running or check the log."
    we have ensured that the server is running,but the deployment is getting failed.
    Please suggest tips to deploy the PAR file successfully.
    Thanks.

    Hi,
    We are using NWDS to create a small application to develop ( for ex jspdynpage)
    .while deploying the par file or exporting it to the server,we are getting the error as "please make sure that the server running.HTTPS protocol is not supported,please ensure that this server is not using HTTPS.
    the server is running and is shown in green.
    we have also  disabled the proxy settings.
    we have also tried by specifiing the IP of the server in the proxy settings.
    the above steps didnt work.please suggest the things to do to make this working.
    thanks,
    rajani.

  • Error while uploading the PAR file of Production to UAT-

    Hi Experts,
    Could you please help me out in resolving the error which i'm facing while uploading the PAR file.
    1. I have downloaded the par file from the production, imported to my NWDS.
    2. Made changes to my  HeadiView.jsp
    3. I want to test my implementation in UAT.So i have uploaded the PAR to UAT system.
    4. Below is the error i'm getting from the Log trace.
    #1.#D27E2000F002008200000020000BD0FE0004436CD4EBF6C2#1200034614604#com.sap.porta
    l.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#BVISHALA#17971##adcapsap18.
    uk_QP0_16441150#BVISHALA#5d8f9460c01111dcafa2d27e2000f002#Thread[PRT-Async 2,5,P
    RT-Async]##0#0#Error##Java###06:56_11/01/08_16441150
    [EXCEPTION]
    #1#com.sapportals.portal.prt.component.PortalComponentException: Error in in
    it method
    Component : com.tw.navigation.Masthead.HeaderiView
            at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
    lComponentContext.java:251)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refr
    esh(PortalComponentContextItem.java:271)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getC
    ontext(PortalComponentContextItem.java:316)
            at com.sapportals.portal.prt.component.PortalComponentRequest.getCompone
    ntContext(PortalComponentRequest.java:387)
            at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.j
    ava:443)
            at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391
            at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.j
    ava:233)
            at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:6
    36)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
    nt(AbstractPortalComponent.java:388)
            at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:816
            at com.sapportals.portal.prt.component.CachablePortalComponent.handleEve
    nt(CachablePortalComponent.java:703)
            at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
    .java:252)
            at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
    ava:368)
            at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
    java:340)
            at com.sapportals.portal.navigation.PortalLauncher.doOnNodeReady(PortalL
    auncher.java:318)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
    nt(AbstractPortalComponent.java:388)
            at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
    .java:252)
            at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
    ava:368)
            at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
    java:340)
            at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(P
    ortalRequestManager.java:642)
            at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(
    ServletConnection.java:240)
            at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatc
    her.java:524)
            at java.security.AccessController.doPrivileged(AccessController.java:242
            at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.ja
    va:407)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.se
    rvice(InvokerServlet.java:156)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
    Impl.doWork(RequestDispatcherImpl.java:321)
            at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
    Impl.forward(RequestDispatcherImpl.java:377)
            at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServle
    t(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReq
    uest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
    t(RequestAnalizer.java:387)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
    t(RequestAnalizer.java:365)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebCo
    ntainer(RequestAnalizer.java:944)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(Requ
    estAnalizer.java:266)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:9
    5)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor
    .java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSes
    sionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRu
    nner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:3
    7)
            at java.security.AccessController.doPrivileged(AccessController.java:215
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.ja
    va:100)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:1
    70)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationExc
    eption: Could not instantiate implementation class com.btexx.pct.easyWCM.navigat
    ion.masthead.HeaderiView of Portal Component com.tw.navigation.Masthead.HeaderiV
    iew because: Could not find implementation class
            at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
    stanceInternal(PortalComponentItemFacade.java:242)
            at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getCo
    mponentInstance(PortalComponentItemFacade.java:160)
            at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponen
    tInstance(PortalComponentItem.java:732)
            at com.sapportals.portal.prt.component.PortalComponentContext.getCompone
    nt(PortalComponentContext.java:103)
            at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
    lComponentContext.java:242)
            ... 44 more
    Caused by: java.lang.ClassNotFoundException: com.btexx.pct.easyWCM.navigation.ma
    sthead.HeaderiView
            at java.lang.Class.forNameImpl(Native Method)
            at java.lang.Class.forName(Class.java:152)
            at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
    stanceInternal(PortalComponentItemFacade.java:228)
            ... 48 more
    Kindly help me to resolve this issue.
    Many Thanks,
    B.Vishali.

    Hi,
    The problem might be caused by the version inconsistency of your J2EE and Portal Platform. 
    Please check the version of your J2EE and Portal.
    Best Regards,
    Assaf

  • Error while sourcing the environment file

    Hi,
    Apps 11.5.10.2
    O/S windows 2003 server
    While sourcing the environment file i am getting the following error
    E:\>oracle\prodappl\appsprod_tstoraf.cmd
    ECHO is off.
    ECHO is off.
    Wed 10/06/2010 06:45 AM
    ECHO is off.
    ECHO is off.
    This script requires the following files:
    ECHO is off.
    C:\MicrosoftVisualStudio\bin\vcvars32.bat
    ECHO is off.
    APPSORA.cmd exiting with status 1
    After this command i am running the following (i am including vc98 directory in the path)
    E:\>C:\MicrosoftVisualStudio\VC98\bin\vcvars32.bat
    Setting environment for using Microsoft Visual C++ tools.
    Actually vcvars32.bat file is under C:\MicrosoftVisualStudio\VC98\bin\vcvars32.bat directory structure
    but
    in appsora.cmd it is showing the C:\MicrosoftVisualStudio\bin\vcvars32.bat (VC98 Directory is not present in this path)
    In contextfile.xml i have not seen any path related to vcvars32.bat.
    In which file i have to change this directory structure of C:\MicrosoftVisualStudio\bin\vcvars32.bat to E:\>C:\MicrosoftVisualStudio\VC98\bin\vcvars32.bat
    please advice
    Regards,
    SRK

    Hi Srk;
    That SR was raised by my team only.
    I have gone through the doc id's given but my Visual Studio directory is more than 8 characters.So Could you please advice, instead of re-installing the visual studio? whether there is any file to change the path from If you already opened SR you have to confirm it wiht Oracle Support
    Also,If we have to re-install the Visual Studio .will be there any effect on the existing 11.5.10.2 application?I belive yes it could effect your system until your install process end.
    Please confirm all those wiht oracle support via your SR
    Regard
    Helios

  • WebInterface Server - Error while opening the PDF file

    Hello,
    We are using webinterface to display the MSDS genearated.
    Our customers use the link provided to them for displaying the msds.
    We imported a few MSDS ( CG36 ), which are in PDF format & displayed successfully on the webinterface server.
    However the newly generated MSDS ( Create Report ) from SAP EH&S system are not getting displayed on the webinterface server. We are getting following error message:
    Error reading resulitng document from filesystem. Class:
    COM.td.ehswww.results.EhsDocument.
    Method:getResolvedDocument().This error could have been caused by a misconfigured filter.ini.
    We checked and found that the filter.ini file is same on both quality & production system.
    We are able to generate & display the report successfully on quality webinterface server.
    Problem only appears on the production webinterface server.
    We also tried to search for the SAP notes on this issue.
    But we could not find out any relevant note for our issue.
    Any help in this regarding is highly appreciated.
    Thanks & Regards,
    Aarohi

    Hello Sebastian,
    Thank you very much for your help.
    We checked on both quality & production webinterface server.
    The Tomcat service is not executed with any specific user.
    The system is working fine on quality , we are getting errors only on the production.
    We also identified a strange behavior on the production web interface server.
    We are able to see files under following menu path:
    There are error files getting generated.
    I guess these error files are getting generated while converting the rtf file to pdf file.
    The resultant PDF file is not getting generated and hence system is giving the error on the webpage.
    Can you guide us as to why these error files are getting generated .? What can be the root cause of this issue.? and How to prevent this.?
    Again thanks a lot for your help.
    Best Regards,
    Aarohi

Maybe you are looking for

  • TAXINJ AND TAXINN QUERY

    Hi... What are the Std Excise condition types in SD. What is the access sequence for it. While maintaining the master record how the values of JMOD gets picked into JEX2 in TAXINJ? Where to maintain the condition types and which in TAXINN for SD and

  • Black and white photos do not preview in "organize"

    The preview of all grayscale images shows as a black window in the organize mode. They appear fine in edit mode. How do I get the preview to appear in the main library and the album? I saw a closely related topic but I am having a slightly different

  • Script for Required fields acting strange on extra spaces at end of Name/Description

    Found this script on this forum, which I added to my submit button. var emptyFields = []; for (var i=0; i<this.numFields; i++) {      var f= this.getField(this.getNthFieldName(i));      if (f.type!="button" && f.required ) {           if ((f.type=="t

  • ICloud Mail not syncing as "read" across all devices

    If I read an email on my Mac, it does not mark as read on my iPhone and i still see the new mail notification on the lock screen and there is a new mail mark on the mail app icon when i unlock the iPhone until I open up mail app and it checks manuall

  • Hyper-V NAT networking

    Hi everyone.. I'm educating myself within IT and I'm going to school at the moment. I've got the task of greating a virtual environment with a Windows Server 2012 and a client with a OS of my own choice (Win7 or 8). I'm using Hyper-V and wanna set up