Error while upgrading EPBC Component

Hi all,
I upgraded SAP NetWeaver 7.01 SP4 to SAP NetWeaver 7.01 SP5.
All components upgraded but EPBC04_0-10005916.SCA failed to upgrade.
There was error during depoloyment. Due to low physical memory in the
hard drive where I have /usr/sap/trans/EPS/in, it was not possible to
carry out the upgradation in one-go.
I am pasting the error message.
I also gave an OSS Message 177504/2010.
Could anybody suggest me what to do now ?
Regards
Kaushik Banerjee
Error Message:
10/03/09 12:10:10 - ***********************************************************
10/03/09 12:10:11 - Start updating EAR file...
10/03/09 12:10:11 - start-up mode is lazy
10/03/09 12:10:12 - EAR file updated successfully for 704ms.
10/03/09 12:10:12 - Start updating...
10/03/09 12:10:13 - EAR file uploaded to server for 1390ms.
10/03/09 12:13:16 - ERROR: Not updated. Deploy Service returned ERROR:
java.rmi.RemoteException: Cannot deploy application sap.com/irj..
Reason: Exception during generation of components of application sap.com/irj in container servlet_jsp.; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/irj in container servlet_jsp.
at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:683)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)

Hi Kaushik
I see deleting the some files manually helped you to go
through the upgrade.
It was caused by long directories names.
The problem here is that the names of the folder/ files under this
folder are larger than the  MAX_PATH characters that can be used for
Windows NTFS. That's why the delete operation fails and as result the
upgarde can not be performed.
Please close this SDN thread as answered.
Kenny

Similar Messages

  • Error while updatig SAP Component Repository in SLD

    We are getting the following error while updatig SAP Component
    Repository in SLD:
    "The import history of the target namespace could not be determined".
    We are in the middle of updating SAP CR in SLD from version 2.0 to
    version 3.0.
    Before updating CR this morning, our 'model version' was 1.4.31 and
    CR Content Version (sld/active):No versioned CR imports detected was
    defined.
    I imported the Model version 1.5.20 using 'cimsap1418_0-10003379.zip'
    and while importing the delta 'CRDELTA1418_0-10003379.zip', we are
    getting the above mentioned error.
    Pls help us to resolve this problem as we took the shutdown time from
    business to update the CR in XPD server.
    Thanks
    Amar

    To upgrade from SAP MASTER DATA FOR SLD 2.0 to SAP CR CONTENT UP TO 2007 (technical version is 3.0), you are required to perform the following steps:
    1. Import the last delta from 2.0. This comprises model 1.5.20 (cimsap1418_...zip) and the content delta (CRDelta1418_...zip). Before you import the new model, check the parameter RejectUnsupportedCIMQualifiers and the existing model version.  Proceed according to Note 907897.
                  In 6.40 and 7. 0 Support Package 0 - Support Package 9, the import of the model (file cimsap....zip) takes 30-60 minutes. As of Release 7.0 Support Package 10, the import requires less than 1 minute.
    2. You can obtain the next update from SAP CR CONTENT UP TO 2007 (3.0).
    > as per note 669669

  • Error while Deleting Software Component

    Hi All,
    I am getting following error while deleting Software Component Version:
    Unable to Delete object DELETEDEMO_COMPONENET, 1.0 of delete.
    You cannot delete a sotware component version if it contains imported interfaces.
    Is there any shortcut isntead of deleting all objets manuually?
    Sri

    Hi Sri.
    It's very simple
    Solution:
    Double Click on Software Component, On Right Hand side >Go to Software Component Version->Delete the software component.If all the necessary Objects have been properly deleted, there will be no problem in Deleting the Software Componet version
    1) Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings.
    2) There should be no Imported SAP Objects in the Software Component. If any delete them and activate changes.
    3) Delete all namespaces in the editor using sign. Do not save the changes.
    4) Delete the two default data types that are created in the Interface Objects-->Data Types of the software component version (ExchangeFaultdata, ExchangeLogdata). Now save changes for the s/w component version and activate the changes. Ignore the warnings that pop-up.
    5) The radio button for u201CInterface import should be at u201CNot permittedu201D instead of u201CImport RFC and IDoc Interfaces from SAP Systems Permittedu201D.
    6) Now go to Software component version menu in the right hand pane. Click on delete and the software component vanishes from left hand pane 
    >> Is there any shortcut isntead of deleting all objets manuually?
    NO.. other way or any any shortcut for this
    Abid

  • Error while upgrading to 10.1.3.5

    I am getting error while upgrading to 10.1.3.5.
    getting error while configuring OWSM. here is the error log.
    *09/09/28 14:28:53 Notification ==>Application Deployer for coreman STARTS.*
    *09/09/28 14:28:53 Notification ==>Undeploy previous deployment*
    *09/09/28 14:28:58 Notification ==>Initialize /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear begins...*
    *09/09/28 14:28:58 Notification ==>Initialize /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear ends...*
    *09/09/28 14:28:58 Notification ==>Starting application : coreman*
    *09/09/28 14:28:58 Notification ==>Initializing ClassLoader(s)*
    *09/09/28 14:28:58 Notification ==>Initializing EJB container*
    *09/09/28 14:28:58 Notification ==>Loading connector(s)*
    *09/09/28 14:28:58 Notification ==>Starting up resource adapters*
    *09/09/28 14:28:58 Notification ==>Initializing EJB sessions*
    *09/09/28 14:28:58 Notification ==>Committing ClassLoader(s)*
    *09/09/28 14:28:58 Notification ==>Initialize coreman begins...*
    *09/09/28 14:28:58 Notification ==>Initialize coreman ends...*
    *09/09/28 14:28:58 Notification ==>Started application : coreman*
    *09/09/28 14:28:58 Notification ==>Binding web application(s) to site default-web-site begins...*
    *09/09/28 14:28:58 Notification ==>Binding web application(s) to site default-web-site ends...*
    *09/09/28 14:28:58 Notification ==>Deleting: /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear*
    *09/09/28 14:28:58 Notification ==>Deleting: /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman/coreman.war*
    *09/09/28 14:28:58 Notification ==>Begin adding application: coreman to container runtime for: oc4j-develop-12420-default*
    *09/09/28 14:28:58 Notification ==>Operation failed with error:*
    Unable to find/read file META-INF/ra.xml in /space/oracle11bpel/j2ee/oc4j_soa11wf/connectors/coreman/coreman archive (IO Error: error in opening zip file)
    Deploy error: Deploy error: Operation failed with error:
    Unable to find/read file META-INF/ra.xml in /space/oracle11bpel/j2ee/oc4j_soa11wf/connectors/coreman/coreman archive (IO Error: error in opening zip file)
    I checked the Connectors directory for coreman but its not available. I even checked with my previous successful installations for this directory, its not even there too.
    The only difference i found in the error logs and the successful logs is ..
    *09/09/28 14:28:58 Notification ==>Begin adding application: coreman to container runtime for: oc4j-develop-12420-default*
    I did not see this line in the success log.
    Here is my environment information.
    I have an OPMN clustered environment. The second node in the cluster was down while this upgradation.
    There are two groups -- default_group and abcbpel_group
    abcbpel_group contains the soa instance. while default_group contains home instance.

    Hi.
    I have the same problem too.
    Had You found the solution?

  • Error while deploying ADSSAP component

    Hi all,
    Iam getting the following error while deploying ADSSAP component in Java Stack
    Failed deployment of SDAs: development component 'PDFManipulation'/'com.adobe'/'Adobe Systems'/'710.20060914230653.122540'/'0' : aborted
    Please help me out in solving this error.

    Hai,
    Try this SAP Note 795991.....
    Regards,
    Yoganand.V

  • Fatal error while rendering UI component  since we are in BI 4.1 SP2 patch 4

    Hello,
    Since we are in BI 4.1 SP2 patch 4, we have one Analysis for Olap report  which have this message : Fatal error while rendering UI component.
    This report gets 7  folders  : 5 of them gets this error message and 2 of them works well
    It's the same problem with patch 6.
    Could you please help us to find a solution ?
    I don't know how to investigate.
    Regards,
    Nicolas

    Hey Nicolas
    We are experiencing a similar error. It appears when we try to create a conditional formatting rule on one of the reports.
    Were you able to find a solution to this?
    Regards
    Antonette

  • Error while upgrade 12.1.1 to 12.13

    Hi,
    I am getting blow error while upgrade 12.1.1 to 12.1.3 (patch 9239090) in linux 32 bit (OEL5),also i started patch from the beginning onwards but still i am getting same errror...
    Please some one help me to move forward ....
    Now i need to fix this issue then only i can move forward ....
    Assigned: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
    Completed: file MSCINTEG.sql on worker 8 for product msc username MSC.
    FAILED: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
    Deferred: file jlbrspedpreupg1.sql on worker 3 for product jl username JL. (Deferment number 2 for this job)
    Assigned: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
    FAILED: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
    Completed: file EGOSEFD2.sql on worker 2 for product ego username EGO.
    Completed: file RRSCRTYP.sql on worker 1 for product rrs username RRS.
    ATTENTION: All workers either have failed or are waiting:
    FAILED: file jlbrspedpreupg1.sql on worker 3.
    ATTENTION: Please fix the above failed worker(s) so the manager can continue.
    Thanks & Regd..
    Suresh

    Hi Hussein,
    I have apply one more time from the beginning onwards... now i am getting same error in worker 1, the worker1 log out put given blow...
    Time when worker started job: Mon Feb 28 2011 13:55:14
    Start time for file is: Mon Feb 28 2011 13:55:14
    sqlplus -s APPS/***** @/d01/VIS/apps/apps_st/appl/jl/12.0.0/patch/115/sql/jlbrspedpreupg1.sql &un_apps &pw_apps
    Connected.
    DECLARE
    ERROR at line 1:
    ORA-04063: package body "APPS.FND_LOG" has errors
    ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_LOG"
    ORA-06512: at line 402
    ORA-04063: package body "APPS.FND_LOG" has errors
    ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_LOG"
    Thanks
    Suresh

  • Error while Upgrading to 9.2.0.8

    Hi Experts,
    I'm trying to upgrade my current version of oracle "9.2.0.1" which is running on a Solaris box, to "9.2.0.8" not able to succeed.
    Can any body help me to solve my problem????
    Thnx & Regards
    Sunil

    Yingkuan,
    You need to apply Patchset 4547809 firstI'm not sure to follow you, the patchset 4547809 is
    Oracle 9.2.0.8 which Sunil wants to apply on his/her
    database, the thread's title is "Error while
    Upgrading to 9.2.0.8", isn't it ?
    If you goto 9.2.0.8 patchset download page, you will see all three patchset listed, there's a good chance Sunil mistakenly download the catch-up patchset instead of the full set. My purpose is to clarify the situation.
    At least he didn't mention Patchset Number.
    PS :
    Patchset 4547809 first, the 415M onePatchset 4547809 is 415M for 64-bits, which seems not
    be used here (the Banner doesn't contains "64bit
    Production"), it's 352Mb for 32-bits. But I maybe
    missed something else.
    Message was edited by:
    N. GasparottoHe didn't mention 64bit but that he didn't mention 32-bit either. Not many Solaris is still under 32bit per se.
    Again my purpose to have him post Patchset Number used, then we will have clear picture and rule out some assumption.

  • Error while upgrading the NW04 engine

    Hi All,
    I got following error while upgrading the NW04 engine. "error while reading sdmrepository.sdc file. return code 16."
    I tried from stand alone. same issue. It would be great if somebody gives solution quickly.
    Thanks
    Vincent

    Hi ,
    even if you start the mode in either standalone or integrated your SDM won't start completely and shows the above error.
    check for sdmrepository.sdc file under <Drive>:\usr\sap\<SAP_ID>\JC<Instance_ID>\SDM\program\config\
    sdc file might got corrupted or it's size would have got reduced. even if you run sdm in standalone or integrated,
    you will get the same error.
    Solution is to compare with the backup file that sapinst created everytime while upgarding the engine in the same folder and
    replace the latest with the current.then your problem is solved.
    hope that helps.reward points if it helps

  • ORA-01092 error while upgrading database from 9.2.0.6 to 10.2.0.1

    Hi ,
    Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
    I executed the catupgrd.sql successfully and recompiled invaild objects.
    After that i tried to startup the database,but am getting the error:
    sql>startup
    oracle instance started
    database mounted
    ORA-01092 : Oracle instance terminated. Disconnection forced
    I checked alert log file.
    I am getting the following errors
    Errors in file /u01/......./udump/VIS_ora/7179.trc
    ORA-00604: error occurred at recursive SQL level 1
    ORA-00607: internal error occurred while making change to a datablock
    ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
    Error 604 happened during database open . Shutting down database
    instance terminated by USER pid =7179
    ORA-01092 error Signaled during alter database open
    Is there any block corruption? could u please share the solution for these errors?

    Hi;
    You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
    Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
    Regard
    Helios

  • Error while upgrading NW04s SP 10 to SP 11

    Hi Experts,
    I am trying to upgrade server NW04s SP 10 to SA 11. while deploying some SCA's I am getting following error. I also tried forced deployment. But not working.
    Anyone has faced the same?? Please help.
    ==========================================================================
    Deployment started Tue Feb 20 13:50:45 GMT+05:30 2007
    ===========================================================================
    Starting Deployment of com.sap.pcd.dbschema
    Finished successfully: development component 'com.sap.pcd.dbschema'/'sap.com'/'SAP AG'/'7.0011.20070128005913.0000'/'6', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201073900''/'6'
    Deployment of com.sap.pcd.dbschema finished successfully (Duration 16218 ms)
    Starting Deployment of com.sapportals.prt.bridge
    Finished successfully: development component 'com.sapportals.prt.bridge'/'sap.com'/'SAP AG'/'7.0010.20061109164817.0000'/'7', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201073900''/'6'
    Deployment of com.sapportals.prt.bridge finished successfully (Duration 12219 ms)
    Starting Deployment of com.sapportals.prt.portalruntime
    Finished successfully: development component 'com.sapportals.prt.portalruntime'/'sap.com'/'SAP AG'/'7.0011.20070128005913.0000'/'6', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201073900''/'6'
    Deployment of com.sapportals.prt.portalruntime finished successfully (Duration 12234 ms)
    Starting Deployment of irj
    Aborted: development component 'irj'/'sap.com'/'SAP AG'/'7.0011.20070128005913.0000'/'6', grouped by :
    CPO data could not be get.
    com.sap.sdm.apiint.serverext.servertype.deployment.DeploymentActionException: Error: Caught the following error or exception: "com.sap.sdm.apiint.serverext.servertype.deployment.DeploymentActionException"
    Additional error message is:
    Caught exception from deploy service of SAP J2EE Engine. Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [***********] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    *********:55004 Reason: Cannot open connection on host: **.*.*.** and port: 55004]
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:455)
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
         at javax.naming.InitialContext.init(InitialContext.java:219)
         at javax.naming.InitialContext.<init>(InitialContext.java:195)
         at com.sap.engine.deploy.manager.DeployManagerImpl.checkCredentials(DeployManagerImpl.java:2983)
         at com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthMethodInvoker.invokeCheckCredentialsInternal(DeployManagerAuthMethodInvoker.java:51)
         at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:45)
         at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:32)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineOnlineDeployerImpl.checkLoginCredentials(EngineOnlineDeployerImpl.java:173)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.getOldDeploymentConfigInternal(EngineJ2EE620OnlineDeployerImpl.java:930)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.getOldDeploymentConfiguration(EngineJ2EE620OnlineDeployerImpl.java:118)
         at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.getOldDeploymentConfiguration(EngineJ2EE620OnlineProcessor.java:87)
         at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.createCpo(EngineJ2EE620OnlineProcessor.java:75)
         at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.getCpo(EngineJ2EE620OnlineProcessor.java:47)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performDeployment(EngineJ2EE620OnlineDeployerImpl.java:180)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
         at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
         at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
         at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
         at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
         at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
         at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
         at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
         at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
         at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
         at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11)
         at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264)
         at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108)
         at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.process(GuiAdminRoleCmdProcessor.java:72)
         at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
         at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
         at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)
         at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
         at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
         at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    **********:55004 Reason: Cannot open connection on host: **.*..* and port: 55004
         at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:53)
         at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:33)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:340)
         ... 36 more
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.checkLoginCredentials.DMEXC)
    Additional error message is:
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [********] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    ************:55004 Reason: Cannot open connection on host: **.*..* and port: 55004]
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:455)
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
         at javax.naming.InitialContext.init(InitialContext.java:219)
         at javax.naming.InitialContext.<init>(InitialContext.java:195)
         at com.sap.engine.deploy.manager.DeployManagerImpl.checkCredentials(DeployManagerImpl.java:2983)
         at com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthMethodInvoker.invokeCheckCredentialsInternal(DeployManagerAuthMethodInvoker.java:51)
         at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:45)
         at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:32)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineOnlineDeployerImpl.checkLoginCredentials(EngineOnlineDeployerImpl.java:173)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.getOldDeploymentConfigInternal(EngineJ2EE620OnlineDeployerImpl.java:930)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.getOldDeploymentConfiguration(EngineJ2EE620OnlineDeployerImpl.java:118)
         at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.getOldDeploymentConfiguration(EngineJ2EE620OnlineProcessor.java:87)
         at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.createCpo(EngineJ2EE620OnlineProcessor.java:75)
         at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.getCpo(EngineJ2EE620OnlineProcessor.java:47)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performDeployment(EngineJ2EE620OnlineDeployerImpl.java:180)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
         at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
         at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
         at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
         at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
         at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
         at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
         at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
         at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
         at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
         at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11)
         at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264)
         at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108)
         at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.process(GuiAdminRoleCmdProcessor.java:72)
         at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
         at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
         at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)
         at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
         at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
         at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    *********:55004 Reason: Cannot open connection on host: **.*..* and port: 55004
         at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:53)
         at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:33)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:340)
         ... 36 more
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).NO_CPO)
    Deployment of irj finished with Error (Duration 13344 ms)
    Starting Deployment of EPBC
    Aborted: software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201073900''/'6':
    Failed deployment of SDAs:
    development component 'irj'/'sap.com'/'SAP AG'/'7.0011.20070128005913.0000'/'6' : aborted
    Please, look at error logs above for more information!
    Deployment of EPBC finished with Error (Duration 11063 ms)

    Can you please check this error while deploying SAP EU. which is important patch.
    Starting Deployment of caf/eu/gp/ui/co
    Finished with warnings: development component 'caf/eu/gp/ui/co'/'sap.com'/'MAIN_APL70VAL_C'/'1078313'/'3', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.11.0.20070202075922''/'3':
    Caught exception during application startup from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Error occurred while starting application sap.com/caf/eu/gp/ui/co and wait. Reason: Clusterwide exception: server ID 502981150:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''sap.com/cafeugpuico'' for startup. Reason=Clusterwide exception: Failed to start application ''sap.com/cafeugpuico'': The referenced application ''sap.com/tcwd4vclauncher'' can''t be started. Check the causing exception for details. Hint: Is the referenced application deployed correctly on the server?
                at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1519)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
                at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4707)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4612)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4585)
                at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
                at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
                at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
                at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
                at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                at java.security.AccessController.doPrivileged(Native Method)
                at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment of caf/eu/gp/ui/co finished with Warning (Duration 7719 ms)
    Starting Deployment of caf/eu/gp/ui/dt/comp/cons
    Aborted: development component 'caf/eu/gp/ui/dt/comp/cons'/'sap.com'/'MAIN_APL70VAL_C'/'1078384'/'3', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.11.0.20070202075922''/'3':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/cafeugpuidtcompcons.. Reason: Clusterwide exception: Failed to deploy application sap.com/cafeugpuidtcompcons. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:             com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/cafeugpuidtcompcons. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment of caf/eu/gp/ui/dt/comp/cons finished with Error (Duration 6031 ms)
    Starting Deployment of SAP-EU
    Aborted: software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.11.0.20070202075922''/'3':
    Failed deployment of SDAs:
    development component 'caf/eu/gp/ui/dt/comp/cons'/'sap.com'/'MAIN_APL70VAL_C'/'1078384'/'3' : aborted
    Please, look at error logs above for more information!
    Deployment of SAP-EU finished with Error (Duration 4516 ms)

  • Error while upgrading the patch from RMS 13.1.1.1 to RMS 13.1.1.2

    Hi,
    While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
    We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
    So anybody could give suggestions on this.
    Appreciate your help
    Thanks,
    Suresh

    I'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
    Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
    The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
    Best regards,
    Erik

  • Sapinst stops with error while installing ess component for Java AS

    Dear experts,
    I really hope you can help me with this one,
    We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely,
    but then stopped with error while deploying components for the Java AS:
    ERROR 2009-03-30 13:01:27
    CJS-30156  SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS/CI/callSdmViaSapinst.log' for more information.
    ERROR 2009-03-30 13:01:28
    FCO-00011  The step enableUsageTypes with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|15|0|enableUsageTypes was executed with status ERROR .
    Any help would be really appreciated as I am stuck with this and dont seem to be able to find any information on this one.
    Thanks a lot for your help in advance.
    Here is the crucial part of callSdmViaSapinst.log:
    Mar 30, 2009 12:55:18... Info: Starting: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'788220'/'0' will be deployed.
    Mar 30, 2009 12:55:18... Info: SDA to be deployed: D:\usr\sap\DE1\DVEBMGS00\SDM\root\origin\sap.com\ess\bp_ess\MAIN_ERP05VAL_C\0\788220\sap.com_ess~bp_ess.sda
    Mar 30, 2009 12:55:18... Info: Software type of SDA: J2EE
    *Mar 30, 2009 12:55:18... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
    Mar 30, 2009 1:00:21 PM  Info: Begin of log messages of the target system:
    *09/03/30 12:55:19 -  ************************************************************
    09/03/30 12:58:07 -  Start updating EAR file...
    09/03/30 12:58:07 -  start-up mode is lazy
    09/03/30 12:58:08 -  EAR file updated successfully for 578ms.
    09/03/30 12:58:08 -  Start deploying ...
    09/03/30 12:58:42 -  EAR file uploaded to server for 30641ms.
    09/03/30 13:00:20 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/ess~bp_ess..
                         Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive D:\usr\sap\DE1\DVEBMGS00\j2ee\cluster\server0\.\temp\deploy\work\deploying\reader1238414327258\sap.comessbp_ess.epa
                   The following objects could not be locked: [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess**.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.mx/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.id/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.jp/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.es

    Thanks Désirée for your answer and apologies for the late update on this one.
    This issue is resolved now, the reason for the error was a lack of memory which probably triggered a timeout in sapinst. After upgrading the memory to 7GB and re-starting the ABAP+Java AS and resuming sapinst everything went through fine. However, this was hard to spot because the logs wouldn't tell you about the lack of memory but about everything else!
    regards,
    Manfred

  • Error while Upgrading 7.6 to 2007A - duplicate key in object 'dbo.NNM1'

    Hello,
    We are trying to upgrade our client from SBO 7.6 SP01 to SBO 2007 SP01 version (It is supported by sap to skip 2004 version)
    Upgrade ends with the following error:
    [Microsoft][SQL Server Native Client 10.0][SQL Server]The CREATE UNIQUE INDEX statement terminated because a duplicate key was found for the object name 'dbo.NNM1' and the index name 'NNM1_PRIMARY'. The duplicate key value is (0).
    I can see with profiler, that upgrader is trying to do the following query:
    ALTER TABLE [dbo].[NNM1]  ADD CONSTRAINT [NNM1_PRIMARY] PRIMARY KEY (Series)
    As I can see, in SBO 7.6 nnm1 table numbering was different than in the new versions (for example 2007A) u2013
    In 7.6 ver. Numbering in  u201Cseriesu201D column was starting from 0 within certain object, hereu2019s example:
    <Objectcode>     <series>         <seriesname>
    ___17     __________0___     sales_order_series1
    ___17          __________1___     sales_order_series2
    ___17          __________2          ___sales_order_series3
    ___15          __________0          ___delivery_series1
    ___15          __________1          ___selivery_series2
    In SAP 2007A version column series has unique values so for above example it should be:
    <Objectcode>     <series>         <seriesname>
    ___17          __________0___          sales_order_series1
    ___17          __________1___          sales_order_series2
    ___17          __________2___          sales_order_series3
    ___15          __________3___          delivery_series1
    ___15          __________4___          selivery_series2
    Anyone had that problem while upgrading from 7.6 to 2007A (or maybe from 7.6 to 2004?).

    Dear Daniel,
    Reported upgrade issue needs a further investigation therefore please log a support message with a component SBO-BC-UPG via the Service Market Place.
    Please also attach 'UpgradeLog' files to the message. You will find the log files in the same directory as your B1 client (b1loggerPidxxxx_xxxxxxxxxxxxxx.txt; B1UpgradePidxxxx_xxxxxxxxxxxxxx.txt)
    Regards,
    Ladislav Meszaros
    SAP Business One Forum Team

  • Error while opening a component in ACC

    I am getting error while trying to open component in ACC. I can the component is running, but when tried to open it (either thro Open component or by double clicking on it) am getting the following error.
    Any idea on the cause of this error?
    Server exception:
    java.lang.ClassNotFoundException: com.package.MyComponent
    at atg.nucleus.SimpleComponentState.readObject(SimpleComponentState.java:593)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
    at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:306)
    at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:155)
    at atg.rmi.context.ContextualSkeletonImpl_Stub.invoke(Unknown Source)
    at atg.rmi.context.ContextualStub.invokeSkeleton(ContextualStub.java:121)
    at atg.security.proxy.UserSessionProxy$SessionStubHandler.invoke(UserSessionProxy.java:180)
    at atg.rmi.context.ContextualStub.invoke(ContextualStub.java:95)
    at $Proxy2.getConfigInfo(Unknown Source)
    at atg.ui.component.model.ComponentClientImpl.getConfigInfo(ComponentClientImpl.java:352)
    at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:214)
    at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:198)
    at atg.ui.component.ComponentBrowser.editSelectedComponent(ComponentBrowser.java:748)
    at atg.ui.component.ComponentBrowser$EditAction.actionPerformed(ComponentBrowser.java:735)
    at atg.ui.common.DevTree$MousePopupAdapter.applyDefaultAction(DevTree.java:266)
    at atg.ui.common.DevTree$MousePopupAdapter.mouseClicked(DevTree.java:289)
    at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
    at java.awt.Component.processMouseEvent(Component.java:6266)
    at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
    at java.awt.Component.processEvent(Component.java:6028)
    at java.awt.Container.processEvent(Container.java:2041)
    at java.awt.Component.dispatchEventImpl(Component.java:4630)
    at java.awt.Container.dispatchEventImpl(Container.java:2099)
    at java.awt.Component.dispatchEvent(Component.java:4460)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
    at java.awt.Container.dispatchEventImpl(Container.java:2085)
    at java.awt.Window.dispatchEventImpl(Window.java:2478)
    at java.awt.Component.dispatchEvent(Component.java:4460)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Client exception:
    java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
    java.lang.ClassNotFoundException: com.package.MyComponent
    at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:178)
    at atg.rmi.context.ContextualSkeletonImpl_Stub.invoke(Unknown Source)
    at atg.rmi.context.ContextualStub.invokeSkeleton(ContextualStub.java:121)
    at atg.security.proxy.UserSessionProxy$SessionStubHandler.invoke(UserSessionProxy.java:180)
    at atg.rmi.context.ContextualStub.invoke(ContextualStub.java:95)
    at $Proxy2.getConfigInfo(Unknown Source)
    at atg.ui.component.model.ComponentClientImpl.getConfigInfo(ComponentClientImpl.java:352)
    at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:214)
    at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:198)
    at atg.ui.component.ComponentBrowser.editSelectedComponent(ComponentBrowser.java:748)
    at atg.ui.component.ComponentBrowser$EditAction.actionPerformed(ComponentBrowser.java:735)
    at atg.ui.common.DevTree$MousePopupAdapter.applyDefaultAction(DevTree.java:266)
    at atg.ui.common.DevTree$MousePopupAdapter.mouseClicked(DevTree.java:289)
    at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
    at java.awt.Component.processMouseEvent(Component.java:6266)
    at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
    at java.awt.Component.processEvent(Component.java:6028)
    at java.awt.Container.processEvent(Container.java:2041)
    at java.awt.Component.dispatchEventImpl(Component.java:4630)
    at java.awt.Container.dispatchEventImpl(Container.java:2099)
    at java.awt.Component.dispatchEvent(Component.java:4460)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
    at java.awt.Container.dispatchEventImpl(Container.java:2085)
    at java.awt.Window.dispatchEventImpl(Window.java:2478)
    at java.awt.Component.dispatchEvent(Component.java:4460)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Caused by: java.lang.ClassNotFoundException: com.package.MyComponent
    at atg.nucleus.SimpleComponentState.readObject(SimpleComponentState.java:593)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
    at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:306)
    at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:155)
    ... 33 more
    Edited by: Gopinath Ramasamy on Sep 3, 2012 1:32 PM

    If you have everything else in place then you may also try to check RMI specific java system property "java.rmi.server.codebase". Try adding the JAR containing your classes into the server's RMI codebase system property as "-Djava.rmi.server.codebase=http://myapp/classes.jar" in the java options of your server startup script. But you should first check what is the existing codebase value and then can specify additional JARs if you feel they should be made available for download to client. Refer http://docs.oracle.com/javase/1.5.0/docs/guide/rmi/codebase.html
    You also mentioned about accessing component through REST call. Can you elaborate a little more on the whole environment and scenario that how/where exactly you are using ACC to view that component?

Maybe you are looking for

  • Report Parameters limited CR11 on server

    On our report server, we have a list of parameters in a few reports that is fairly long.  The entire list doesnu2019t show up.  On our local machines I have found this fix for crystal. http://www.tek-tips.com/faqs.cfm?fid=811 However, I do not see th

  • How do I restore my old Firefox desktop. It was setup the way I like it and now its gone. is there a way to find the old URL so I can restore my page? I

    Some f___ing program change my FireFox home page which was set-up just the way I work and the way I like. I once wrote down the URL so if this happened again I could just type it in and then drag the URL over to the little house and it would restore

  • Oc4j deployment problem

    i have a bc4j-web-application. i have deployed the jsp-application to the oc4j, running on my windows system. but after opening the jsp page, i got following error: oracle.jbo.JboException: JBO-33001: Cannot find the configuration file mypackage \com

  • Help on JSTL sql:query / tag

    Hi..... Currently i am trying to query a date from MSSQL using <sql> tag. I had tested in MSSQL on this SQL statement which is:- SELECT * FROM hr_leave WHERE startDate LIKE 'Apr 20 2006%' It can query my MSSQL datetime. Then , I apply this query insi

  • Iweb hyperlink opacity frustration!

    Hi there, I'm using iWeb to put together a website for my assessment and I'm currently having problems with my text hyperlinks. I've made its 'normal' setting 0% opaque with a black rollover. This works fine in the program but once I publish it to my