Error while using ADF map component
I am facing problem while using ADF map component to display geographical addresses on the map. Steps I have followed are as follows :
1. I have created a simple table with structure.
location_name varchar2(20),
longitude number(10),
latitude(10)
This table is having records for actual values.
2. I have created BC objects for accessing this table.
3. Then I have added this data control to the JSP page as a ADF map and point theme. Here I have specified map viewer URL as http://elocation.oracle.com/mapviewer/. I have binded values for longitude and latitude to the values from EO. I have specified point data value as location_name. No value is specified for category.
With this setup when I try to execute the page, it is throwing following error.
DVT-26007: Theme mapPointTheme1 cannot be displayed because data at row 0(rowId=0001000000055445535431) does not have value.
Can someone guide me on this please.....
Message was edited by:
user609092
Hi,
When we add point theme to the map, we specify the data control binding to this theme. This binding is done against the attribute names from the data control. I want to bind this theme input values to some variables. So that it can be changed at runtime. I think this can be done if we are able to use EL. So is it possible to achieve this? Could you please suggest me any other alternative way to achieve this.
Thanks,
Prashant
Similar Messages
-
ERROR WHILE USING XSLT MAPPING IN INTERFACE MAPPING
Hi,
We are using an xslt mapping in our scenario but while i load the XSLT mapping in the interface mapping i get a message :
Transformer configuration exception occurred when loading XSLT
sorce interface :outbound and asyncronous.
mapping : XSLT mapping (imported as a zip file)
target interface: abstract,asyncronous.
The xslt runs well in standalone and its well formed and there is no name space issue.
please help if any one has faced such a situation while using XSLT mapping.
regards,
Anirban.Hi Anirban
When you say it runs well <i>standalone</i> what exactly do you mean? Which XSLT processor are you using to run it? There are subtle difference between XSTL processors that can sometimes result in incompatibilities. For instance, I have seen XSLTs run correctly in XMLSpy but incorrectly (or at least slightly differently) in XI.
Regards,
Thorsten -
Error while adding ADF Business Component
Hi All,
I am using JDev 11.1.1.3 and trying to create a new Application.
Under the Model Project of this Application when I am trying to add Business component I am getting following error:
" *Wizard Open Error*
*Illegal name. It is either a reserved word or an object of a given name already exists within the project.*
*com.java.DemoApp.Model*
*Exception: oracle.jbo.dt.objects.JboException* "
Steps I followed:
New Application --> Fusion Web Application (ADF) --> Gave App name and hit Finish Button.
Model and View Controller Projects got created.
Now when I am trying to add ADF Business Component I am Getting above error.
Please HelpHi John ,
Please find details and steps below:
1. Open Jdev
2. Click New Application
3. Create Fusion Web Application (ADF)
wizard will come up
Details entered:
Application Name: DemoApp
Directory: D:\Jdev\mywork\DemoApp
Application Package Prefix com.java.Demo
4. Hit Next Button
Project 1Name come (Step 2 of 5)
Project Name Model (Default Project Name)
Directory D:\Jdev\mywork\DemoApp\Model (Automatically Populated)
No changes done
5. Hit Next Button
Project 1 Java Settings come (Step 3 of 5)
Below values automatically populated
Default package com.java.Demo.model
Java Source Path D:\Jdev\mywork\DemoApp\Model\src
Output Directory D:\Jdev\mywork\DemoApp\Model\classes
No changes done
6. Hit Next button
Project 1Name come (Step 4 of 5)
Project Name ViewController (Default Project Name)
Directory D:\Jdev\mywork\DemoApp\ViewController (Automatically Populated)
No changes done
7. Hit Next Button
Project 1 Java Settings come (Step 4 of 5)
Below values automatically populated
Default package com.java.Demo.view
Java Source Path D:\Jdev\mywork\DemoApp\ViewController\src
Output Directory D:\Jdev\mywork\DemoApp\ViewController\classes
No changes done
8. Click Finish Button
9. Select Model Project under Application Navigator
10. Right Click and select New --> ADF Business Component --> Application Module --> Ok
Error Thrown..
Please let me know if more details required
Thanks and Regards
Manav Ratra -
Error while using a table component in a widget
hi friends, i am trying the example from the enterprise widget development guide (https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc) to create a widget for the BAPI_EMPLOYEE_GETDATA using the RFC but the method showTableCMainTable does not get created in the view.js file.
will be greatful for any suggestionsresolved it my self....dfidnt click on the button to generate the code...thanks
-
Error while using DB Adapter in BPEL process
Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?did u deploy your dbadapter through console to the plan mentioned for deployment?
-
Error while deleting a mapping
Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
at oracle.wh.util.Assert.owbAssert(Assert.java:51)
at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
SebastianThese type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM -
OSB: Cannot acquire data source error while using JCA DBAdapter in OSB
Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PMHi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
</default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
<connection-properties>
<properties>
<property>
<name>xADataSourceName</name>
<value>jdbc/SOADataSource</value>
</property>
<property>
<name>dataSourceName</name>
<value></value>
</property>
<property>
<name>platformClassName</name>
<value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
</property>
</properties>
</connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Run time error while using Class gcl_error
Hi All,
I am getting run time error while using class gcl_error
type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
WA_AVBBD-APOMOBILE
DA_SUBRC
DA_UPDKZ
DA_VVBBD_TABIX
0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson -
"Error while using XML iview" with XML iview template
Our portal platform: HP-UX, WAS 6.40 JAVA, EP 6.0 SP14
We created an XML iview using XML iview template and configured the XML source URL with RSS feeder addresses such as"https://forums.sdn.sap.com/rss/rssmessages.jsp?forumID=41". And then select RSS to XHTMLB as the XML transformation format and save. When I try to preview the iview, I always got error "Error while using XML iview, please contact your system administrator". Here is the log and among which I found an error "java.net.UnknownHostException: news.163.com". Does this indicate that the Portal server is not able to interpret the address of the URL host?
#1.5#000F20196FBC0063000000080000623300043FCBAE39EA79#1196043941051#com.sap.portal.httpConnectivity.transformationService#sap.com/irj#com.sap.portal.httpConnectivity.transformationService.transformerservice#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_19##0#0#Error##Plain###Error during transformation using pipe: transformer-com.sap.portal.transformationservice-RSS_TO_XHTMLB-1.0;transformer-com.sap.portal.transformationservice-XHTMLBSAXHandler-1.0#
#1.5#000F20196FBC00630000000A0000623300043FCBAE39EDB0#1196043941051#com.sap.portal.httpConnectivity.xmlIViewsRuntime#sap.com/irj#com.sap.portal.httpConnectivity.xmlIViewsRuntime#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/System/Server#Plain###transform - exception raised during transformation. Make sure that the input source is valid and that all used transformers exists.#
#1.5#000F20196FBC005B0000001E0000623300043FCBCC12043B#1196044441749#com.sap.portal.httpConnectivity.transformationService#sap.com/irj#com.sap.portal.httpConnectivity.transformationService.java.lang.Class#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_37##0#0#Error##Java###Error openning connection when getting input stream for URL:http://news.163.com/special/00011K6L/rss_newstop.xml
[EXCEPTION]
#1#java.net.UnknownHostException: news.163.com
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:153)
at java.net.Socket.connect(Socket.java:474)
at java.net.Socket.connect(Socket.java:424)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:522)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:499)
at com.sapportals.portal.ivs.http.HttpClient.connect(HttpClient.java:378)
at com.sapportals.portal.ivs.http.HttpClient.send(HttpClient.java:391)
at com.sapportals.portal.pb.contentservice.fetcher.DataFetcher.OpenConnection(DataFetcher.java:117)
at com.sap.portal.httpconnectivity.transformationservice.xmlsource.HTTPStreamSource.getInputStream(HTTPStreamSource.java:295)
at com.sap.portal.httpconnectivity.transformationservice.PipeTransformer.transform(PipeTransformer.java:131)
at com.sap.portal.httpconnectivity.transformationservice.EPBaseTransformer.transform(EPBaseTransformer.java:257)
at com.sap.portal.httpconnectivity.transformationservice.TransformerService.transform(TransformerService.java:284)
at com.sap.portal.httpconnectivity.xmltransformationiview.runtime.XMLTransformationIView.transform(XMLTransformationIView.java:222)
at com.sap.portal.httpconnectivity.xmltransformationiview.runtime.XMLTransformationIView.doContent(XMLTransformationIView.java:87)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
And then I tried to upload an XML file on the portal server through KM and created another XML iview. I got the same error message "Error while using XML iview....". But I found that the log contained different message:
#1.5#000F20196FBC0059000000090000623300043FCC25CCAC4B#1196045947167#com.sap.portal.httpConnectivity.transformationService#sap.com/irj#com.sap.portal.httpConnectivity.transformationService.transformerservice#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_34##0#0#Error##Plain###Error during transformation using pipe: transformer-com.sap.portal.transformationservice-RSS_TO_XHTMLB-1.0;transformer-com.sap.portal.transformationservice-XHTMLBSAXHandler-1.0#
#1.5#000F20196FBC00590000000B0000623300043FCC25CCAEDC#1196045947168#com.sap.portal.httpConnectivity.xmlIViewsRuntime#sap.com/irj#com.sap.portal.httpConnectivity.xmlIViewsRuntime#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_34##0#0#Error#1#/System/Server#Plain###transform - exception raised during transformation. Make sure that the input source is valid and that all used transformers exists.#
#1.5#000F20196FBC005C000000180000623300043FCC5EB48FCF#1196046901893#com.sap.portal.httpConnectivity.xmlIViewsRuntime#sap.com/irj#com.sap.portal.httpConnectivity.xmlIViewsRuntime#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#/System/Server#Plain###transform - exception raised during transformation. Make sure that the input source is valid and that all used transformers exists.#
#1.5#000F20196FBC0066000000020000623300043FCC61683438#1196046947221#com.sap.portal.httpConnectivity.xmlIViewsRuntime#sap.com/irj#com.sap.portal.httpConnectivity.xmlIViewsRuntime#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#/System/Server#Plain###transform - exception raised during transformation. Make sure that the input source is valid and that all used transformers exists.#
#1.5#000F20196FBC00570000000D0000623300043FCC7B6DCFB3#1196047383789#com.sap.portal.httpConnectivity.transformationService#sap.com/irj#com.sap.portal.httpConnectivity.transformationService.java.lang.Class#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_30##0#0#Error##Java###Error openning connection when getting input stream for URL:http://bfepdev.bf.ctc.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/Links/rss.xml
[EXCEPTION]
#1#java.io.IOException: Server returned HTTP response code: 401 for URL: http://bfepdev.bf.ctc.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/Links/rss.xml
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at sun.net.www.protocol.http.HttpURLConnection$3.run(HttpURLConnection.java:840)
at java.security.AccessController.doPrivileged(Native Method)
at sun.net.www.protocol.http.HttpURLConnection.getChainedException(HttpURLConnection.java:834)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:601)
at com.sapportals.portal.ivs.http.HttpClient.getResponseInputStream(HttpClient.java:615)
at com.sapportals.portal.pb.contentservice.fetcher.DataFetcher.getInputStreamResponse(DataFetcher.java:182)
at com.sap.portal.httpconnectivity.transformationservice.xmlsource.HTTPStreamSource.getInputStream(HTTPStreamSource.java:296)
at com.sap.portal.httpconnectivity.transformationservice.PipeTransformer.transform(PipeTransformer.java:131)
at com.sap.portal.httpconnectivity.transformationservice.EPBaseTransformer.transform(EPBaseTransformer.java:257)
at com.sap.portal.httpconnectivity.transformationservice.TransformerService.transform(TransformerService.java:284)
at com.sap.portal.httpconnectivity.xmltransformationiview.runtime.XMLTransformationIView.transform(XMLTransformationIView.java:222)
at com.sap.portal.httpconnectivity.xmltransformationiview.runtime.XMLTransformationIView.doContent(XMLTransformationIView.java:87)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
Caused by: java.io.IOException: Server returned HTTP response code: 401 for URL: http://bfepdev.bf.ctc.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/Links/rss.xml
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:794)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:272)
at com.sapportals.portal.ivs.http.HttpClient.send(HttpClient.java:395)
at com.sapportals.portal.pb.contentservice.fetcher.DataFetcher.OpenConnection(DataFetcher.java:117)
at com.sap.portal.httpconnectivity.transformationservice.xmlsource.HTTPStreamSource.getInputStream(HTTPStreamSource.java:295)
... 37 more
#1.5#000F20196FBC00570000000E0000623300043FCC7B6DD77E#1196047383800#com.sap.portal.httpConnectivity.transformationService#sap.com/irj#com.sap.portal.httpConnectivity.transformationService.transformerservice#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_30##0#0#Error##Plain###Error during transformation using pipe: transformer-com.sap.portal.transformationservice-RSS_TO_XHTMLB-1.0;transformer-com.sap.portal.transformationservice-XHTMLBSAXHandler-1.0#
#1.5#000F20196FBC0057000000100000623300043FCC7B6DD9C8#1196047383801#com.sap.portal.httpConnectivity.xmlIViewsRuntime#sap.com/irj#com.sap.portal.httpConnectivity.xmlIViewsRuntime#Administrator#1176##bfepdev_EPD_5623650#Administrator#7a7283a09bc511dca79a000f20196fbc#SAPEngine_Application_Thread[impl:3]_30##0#0#Error#1#/System/Server#Plain###transform - exception raised during transformation. Make sure that the input source is valid and that all used transformers exists.#
Anyone has any idea on this? thanks.Hi Yepin Jin,
I am facing the same issue did you solved it?
Regards,
Orlando Covault -
Deplyment error while using service reference
Hi All,
I'm facing similar error where I get the following error when i try to run the application.
Following error i get when i try to deploy
Failed to prepare application ''sap.com/asp_all_sites'' for startup. Reason= Clusterwide exception: Failed to start dependent service ''PORTAL:sap.com/com.sap.compatibility50.cache.cache'' of application ''sap.com/asp_all_sites''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
I have added this in Sharing references but yet it doesn't help me. I'm using ICacheService in my code.
This **URGENT** Deplyment error while using service reference i was following but could not arrive at any result
Please advise
Thanks
SrikantHi All
I'm getting following error whenever I deploy:
11-dec-2007 18:03:17 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[009]Deployment finished with warning
Settings
SDM host : aixlp203
SDM port : 52618
URL to deploy : file:/C:/DOCUME1/sdurgama/LOCALS1/Temp/temp24205sap.com~zsp_all_sites.ear
Result
=> deployed with warning : file:/C:/DOCUME1/sdurgama/LOCALS1/Temp/temp24205sap.com~zsp_all_sites.ear
Finished with warnings: development component 'zsp_all_sites'/'nl.essent'/'local'/'20071211180226'/'0':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application nl.essent/zsp_all_sites and wait. Reason: Clusterwide exception: server ID 263194450:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application sap.com/zsp_all_sites cannot be started. Reason: it has hard reference to resource com.sap.portal.compatibility50.cache with type application, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:580) at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:136) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4707) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4612) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4585) at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
The things I have done so far:
1. Deployed the custom library and refered in library references. Its the same name as it is Visual Admin
2. Added Cache API Jar file as external Jar file; added the Sharing reference and also all the steps mentioned in the following link:
Webdynpro DC and J2EE DC
3. The DC builds properly but fails at deployment
My question is there any way that I can manually start the service.
I find the application in Server >> Services >> Deploy is with invalid kind of symbol (neither blue checked symbol / red cross symbol). How do I restore the application
I using ICacheServices in my code using Sharing references
like (ICacheService)WDPortalUtils.getServiceReferences("com.sap.compatibility50.cache.cache"). is this right
Please let me know
Thanks in advance
Srikant -
Error while using P2V in Oracle VM 2.2 version
Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AMuser10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work. -
I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALiHello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM -
Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0
I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application. I got the following error:
System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
So why am I getting this error?
GKBsounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs? -
In Oracle 10g Error while using COLLECT
I getting error while using collect in 10g
SQL> ed
Wrote file afiedt.buf
1 SELECT deptno
2 , COLLECT(ename) AS emps
3 FROM emp
4 GROUP BY
5* deptno
SQL> /
, COLLECT(ename) AS emps
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got -
Please give me the solution.you are using old version of SQL*Plus. if you use later version it will give you correct result.
Edited by: unus on Mar 14, 2010 4:25 AM -
Error while using XML Iview, please contact your system administrator.
Hello everybody,
I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
Area Version
J2EE Engine 6.40 PatchLevel 98256.313
Portal 6.0.14.0.0
, can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
Thanks in advance,
Regards,
Sarabjeet.Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel
Maybe you are looking for
-
Setting up Down Payment Clearing Account & Down Payment Offset Acct
Hi I wonder if someone could perhaps guide me to a possible solution on the above querie. I am trying to post a Down Payment invoice within SAP Bus One 2007A but get the following error: GL Account code is missing (1) [message 131-46]. I have spoken
-
Layout problem with smartform..Little Urgent
Hi gurus, I have a window of size 1 cm.. In this i want to print a number which should be of the same size as the window(1 cm in height). But the maximum font i can give in the character format is 99 pt. and this is making the number to printed in le
-
Continous Cheque Printing !!!!
hello everybody, the problem i am facing is with the <b>continous cheque printing</b>, using the TCODE - f110 ,everything is working fine, but the problem is, out of the multiple cheque it prints only one cheque at a time. after triggering the print
-
HELP!!!!! I have fixed everything as far as my errors go. These are the last 2. ANYONE PLEASE HELP!!! Here are the errors and the code: InvestUnlimitedDH.java [68:1] No method found matching setData(int,int) myUse.setData (21, c); ^ InvestUnlimitedDH
-
Illustrator brush stroke - Character arm rig
I found some fantastic tutorials on how to animated cartoon characters going from Adobe Illustrator to Flash. Very useful. One tip that was tantalizingly mentioned by not spelled out was how you can create a character's whole arm as a brush stroke i