Error while using comments

Hi,
When I try to create a comment I get the following error -
"The cell cannot be updated. Submission status must be modified to allow changes".
On the Input schedule I have data cells where I can enter the data and that gets saved to the Database without errors.
How do I go about changing the submission status ?
thx
ATW

hi,
Go to BPC Excel->eSubmit->Modify Work Status.
There you can change your workstatus to unlocked to set the input schedule available for editing.
Regards,
Anila
Edited by: Anila Mohan on Apr 24, 2009 9:00 AM

Similar Messages

"Submission status" error while posting comments using evcom

Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Runtime Error while using Dynamic Selection

Hi,
We are getting a runtime error while using a dynamic selection. One of the fields has got an apostrophe in the middle of the text and so the condition is returning an error SAPSQL_WHERE_PARANTHESES.
Let's say the value in the field is SCV's. So the WHERETAB is filled as 'SCV's' or `SCV's`. An exception is caught in this case as there is no closing apostrophe.
Let us know if anyone has come across a similar issue and any help is appreciated.
Regards,
Sarves

Hi Sarves,
as Rob said.
check also the [ORACLE FAQS|http://www.orafaq.com/faq/how_does_one_escape_special_characters_when_writing_sql_queries] or [SQL SERVER u2013 How to Escape Single Quotes|http://blog.sqlauthority.com/2008/02/17/sql-server-how-to-escape-single-quotes-fix-error-105-unclosed-quotation-mark-after-the-character-string/]
Honestly: Before posting here and getting a whole lot of more or less useless comments just use your favorite search engine.
Regards,
Clemens

ORA-00902: invalid datatype comile error while using CAST function

Hi everyone,
I'm getting ORA-00902: invalid datatype compilation error while using CAST function.
open ref_cursor_list for select empName from TABLE(CAST(part_t AS partnumberlist));
The partnumberlist and ref_cursor_list is declared in the Package spec as given below.
TYPE ref_cursor_list IS REF CURSOR;
TYPE partnumberlist IS TABLE OF emp.empName%TYPE;
The error points the partnumberlist as invalid datatype in TOAD because of this i'm unable to compile the package.
Any suggestion
Thanks and regards
Sathish Gopal

Here is my code for
package Spec
CREATE OR REPLACE PACKAGE "HISTORICAL_COMMENTZ" AS
TYPE prior_part_data_record IS RECORD (
prior_part_row_id PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE,
prior_pgm_chng_s_id PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE
TYPE parts_list IS TABLE OF prior_part_data_record;
--TYPE parts_list IS TABLE OF NUMBER;
TYPE partnumberlist IS TABLE OF PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE;
TYPE partnumber_cursor IS REF CURSOR;
TYPE comment_record IS RECORD (
pgm_s_id                     PGM_PART_CMNT.PGM_S_ID%TYPE,
part_row_s_id                PGM_PART_CMNT.PART_ROW_S_ID%TYPE,
pgm_chng_s_id                PGM_PART_CMNT.PGM_CHNG_S_ID%TYPE,
cmnt_txt                     PGM_PART_CMNT.CMNT_TXT%TYPE,
cmnt_dt                     PGM_PART_CMNT.CMNT_DT%TYPE,
updt_rsrc_id                PGM_PART_CMNT.UPDT_RSRC_ID%TYPE
TYPE comment_list IS TABLE OF comment_record;
global_pgm_s_id INTEGER := 0;
global_part_row_s_id INTEGER := 0;
err_num NUMBER := 999999;
err_msg VARCHAR2 (250);
PROCEDURE getComments (
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist out partnumber_cursor);
END;
Package Body
CREATE OR REPLACE PACKAGE BODY HISTORICAL_COMMENTZ
AS
FUNCTION getPriorPart
(param_prior_pgm_chng_s_id IN PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE,
return_prior_part_data_record IN OUT prior_part_data_record
RETURN INTEGER
IS
retVal INTEGER;
prior_part_row_id INTEGER;
prior_pgm_chng_s_id INTEGER;
local_prior_part_data_record prior_part_data_record;
BEGIN
SELECT PR_PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_prior_part_data_record
--SELECT PR_PART_ROW_S_ID INTO retVal
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND CUR_PGM_CHNG_S_ID = param_prior_pgm_chng_s_id;
return_prior_part_data_record := local_prior_part_data_record;
retVal := 0;
RETURN retVal;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
END getPriorPart;
FUNCTION getComment (found_parts_list IN parts_list, comments OUT comment_list)
RETURN INTEGER
IS
CURSOR init_cursor
IS
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
FROM PGM_PART_CMNT WHERE 1 = 2;
retVal INTEGER;
indexNum PLS_INTEGER;
local_part_record prior_part_data_record;
local_comment_record comment_record;
local_part_row_s_id NUMBER;
i PLS_INTEGER;
BEGIN
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO comments;
i := 0;
indexNum := found_parts_list.FIRST;
WHILE indexNum IS NOT NULL
LOOP
local_part_record := found_parts_list(indexnum);
local_part_row_s_id := local_part_record.prior_part_row_id;
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
INTO local_comment_record FROM PGM_PART_CMNT
WHERE PGM_S_ID = global_pgm_s_id
AND PART_ROW_S_ID = local_part_row_s_id;
comments(i) := local_comment_record;
i := i + 1;
END LOOP;
RETURN retval;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
END getComment;
PROCEDURE getComments
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist OUT partnumber_cursor)
IS
comment_recordlist comment_record;
retPartnumberlist partnumberlist;
found_parts_list parts_list;
local_part_record prior_part_data_record;
is_more_parts BOOLEAN;
driver_chng_s_id NUMBER;
num_parts NUMBER;
retVal NUMBER;
comments comment_list;
returnPartnumberlist partnumberlist;
iloopCounter PLS_INTEGER;
inx1 PLS_INTEGER;
part_t partnumberlist :=partnumberlist(100,200,300);
CURSOR part_list_init_cursor
IS
SELECT PR_PART_ROW_S_ID,PR_PGM_CHNG_S_ID FROM PGM_RPLCMNT_PART WHERE 1 = 2;
CURSOR inIt_cursor
IS
SELECT 0 FROM DUAL WHERE 1 = 2;
BEGIN
DBMS_OUTPUT.ENABLE (5000000);
global_pgm_s_id := pgm_s_id;
global_part_row_s_id := part_row_s_id;
SELECT PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_part_record
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id AND
CUR_PGM_CHNG_S_ID IN (SELECT MAX(CUR_PGM_CHNG_S_ID) FROM PGM_RPLCMNT_PART WHERE
PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id
GROUP BY PART_ROW_S_ID);
OPEN part_list_init_cursor;
FETCH part_list_init_cursor
BULK COLLECT INTO found_parts_list;
-- Add the existing part to the found list
found_parts_list.EXTEND;
found_parts_list(1) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
num_parts := 1;
is_more_parts := TRUE;
WHILE (is_more_parts) LOOP
retVal := getPriorPart(driver_chng_s_id,local_part_record);
IF (retVal != -1) THEN
found_parts_list.EXTEND;
num_parts := num_parts + 1;
found_parts_list(num_parts) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
ELSE
is_more_parts := FALSE;
END IF;
END LOOP;
--num_parts := getComment(found_parts_list,comments);
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO returnPartnumberlist;
num_parts := found_parts_list.COUNT;
FOR iloopCounter IN 1 .. num_parts
LOOP
returnPartnumberlist.EXTEND;
returnPartnumberlist(iloopCounter) := found_parts_list(iloopCounter).prior_part_row_id;
END LOOP;
retPartnumberlist := returnPartnumberlist;
open
*          partnumber_cursorlist for select PR_PART_ROW_S_ID from TABLE(CAST(retPartnumberlist AS historical_commentz.partnumberlist));*
DBMS_OUTPUT.put_line('Done....!');
EXCEPTION
some code..............................
END getComments;
END HISTORICAL_COMMENTZ;
/

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Error while using UTL_FILE

I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALi

Hello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM

Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application. I got the following error:
System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
So why am I getting this error?
GKB

sounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Error while using DB Adapter in BPEL process

Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

did u deploy your dbadapter through console to the plan mentioned for deployment?

In Oracle 10g Error while using COLLECT

I getting error while using collect in 10g
SQL> ed
Wrote file afiedt.buf
1 SELECT deptno
2 , COLLECT(ename) AS emps
3 FROM emp
4 GROUP BY
5* deptno
SQL> /
, COLLECT(ename) AS emps
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got -
Please give me the solution.

you are using old version of SQL*Plus. if you use later version it will give you correct result.
Edited by: unus on Mar 14, 2010 4:25 AM

Error while using XML Iview, please contact your system administrator.

Hello everybody,
I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
    Area           Version
    J2EE Engine    6.40 PatchLevel 98256.313
    Portal         6.0.14.0.0
, can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
Thanks in advance,
Regards,
Sarabjeet.

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Error while using exp utility

Hi,
I am getting the following oracle error while using exp,
can someone please suggest on this,
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIEBEL
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIEBEL
About to export SIEBEL's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIEBEL's tables via Conventional Path ...
. . exporting table EIM_ACCDTL_TNT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNTROUTE
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed
. . exporting table EIM_ACCNT_CUT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNT_DTL
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed

Satish is right, there exists bug for 11.1.0.6.
Look at metalink note 741984.1.
Bug number is 5872788 - there exists patch as well.

Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.

Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

"llegal character in path at index" Error While Using wsimport from ant.

Hi,
I am getting the following error, while using wsimport from ant build script. you have the details below. I dont have a clue on this error.
Error :
wsimport:
[echo] Generating the client stubs
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line 0 of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line ? of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Element "{http://endpoint.helloservice/}sayHello" not found.
Java WebService :
package helloservice.endpoint;
import javax.jws.WebMethod;
import javax.jws.WebService;
@WebService()
public class Hello {
private String message = new String("Hello, ");
@WebMethod()
public String sayHello(String name) {
return message + name + ".";
Ant Build.xml
<project name="${project.name}" basedir="." default="ear">
     <property file="WS_build.properties"/>
     <target name="init">
          
          <echo description="Setting the path for the project"/>
          <path id="classpath">
               <fileset dir="${lib.dir}" includes="*.jar"/>
               <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
          </path>
          
          <echo description="WSGEN Definition"/>
          <taskdef name="wsgen" classname="com.sun.tools.ws.ant.WsGen">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
          
          <echo description="WSImport Definition" />
          <taskdef name="wsimport" classname="com.sun.tools.ws.ant.WsImport">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
     </target>
     <target name="Compile" depends="init">
          <echo description="Compiling the project"/>
          <mkdir dir="${build.dir}"/>
          <mkdir dir="${build.dir}/classes"/>
          <javac destdir="${build.dir}/classes" srcdir="${java.base}">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </javac>
          <copy todir="${build.dir}/classes">
               <fileset dir="${java.base}" excludes="**/*.java"/>
          </copy>
     </target>
     <target name="wsgen" depends="Compile">
               <echo message="Generating the wsdl file[${project.name}Service.wsdl]" />
               <mkdir dir="${service.dir}"/>
               <mkdir dir="${service.dir}/server"/>
               <mkdir dir="${service.dir}/server/classes"/>
               <mkdir dir="${service.dir}/server/src"/>
               <mkdir dir="${service.dir}/server/wsdl"/>
               <wsgen sei="${sei.class}" destdir="${service.dir}/server/classes" genwsdl="true"
               sourcedestdir="${service.dir}/server/src" resourcedestdir="${service.dir}/server/wsdl">
                    <classpath>
                         <path refid="classpath" />
                         <pathelement location="${build.dir}/classes" />
                    </classpath>
               </wsgen>
     </target>
     <target name="copy" depends="wsgen">
               <echo message="Copying class and config files into ${web-inf.dir} folder" />
               <copy todir="${web-inf.dir}">
                    <fileset dir="${build.dir}"/>
                    <fileset dir="${service.dir}/server" includes="**/*.class"/>
                    <fileset dir="." includes="${lib.dir}/*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}/${lib.dir}">
                    <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}">
                    <fileset dir="${web-inf.dir}" includes="**/*.xml"/>
               </copy>
     </target>
     
     <target name="war" depends="copy">
          <echo message="Creating the war file [${project.name}.war]" />
          <mkdir dir="${dist.dir}"/>
          <mkdir dir="${dist.dir}/server"/>
          <war destfile="${dist.dir}/server/${project.name}.war" webxml="${web-inf.dir}/web.xml" basedir="${web.dir}"/>
     </target>
     <target name="wsimport" depends="war">
          <echo message="Generating the client stubs" />
          <mkdir dir="${service.dir}"/>
          <mkdir dir="${service.dir}/client"/>
          <mkdir dir="${service.dir}/client/classes"/>
          <mkdir dir="${service.dir}/client/src"/>
          <wsimport wsdl="${basedir}/${service.dir}/server/wsdl/${project.name}.wsdl"
               destdir="${service.dir}/client/classes"
               package="${wsimport.package}"
               sourcedestdir="${service.dir}/client/src">
          </wsimport>
     </target>
     <target name="clientjar" depends="wsimport">
<echo message="Creating the client jar file [${project.name}Client.jar] " />
<copy todir="${service.dir}/client/classes">
<fileset dir="${service.dir}/client/src"/>
</copy>
<mkdir dir="${dist.dir}/client"/>
               <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
               </tstamp>
<jar destfile="${dist.dir}/client/${project.name}Client.jar"
basedir="${service.dir}/client/classes">
               <manifest>
               <attribute name="Built-By" value="${user.name}"/>
               <attribute name="Built-Date" value="${TODAY}"/>
               <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
<mkdir dir="${dist.dir}/client"/>
     </target>
     
     <target name="enginejar" depends="clientjar">
     <echo message="Creating the engine jar file for local call [${project.name}.jar] " />
          
          <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
          </tstamp>
     <jar destfile="${dist.dir}/server/${project.name}.jar"
     basedir="${build.dir}/classes">
               <manifest>
                    <attribute name="Built-By" value="${user.name}"/>
                    <attribute name="Built-Date" value="${TODAY}"/>
                    <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
          </target>
          
          <target name="ear" depends="enginejar" >
               <echo message="Creating the ear file [${project.name}.ear]" />
               <ear destfile="${dist.dir}/server/${project.name}.ear" appxml="META-INF/application.xml">
               <fileset dir="${dist.dir}/server" includes="${project.name}.war"/>
          </ear>
               <antcall target="clean"></antcall>
          </target>
          
          <target name="clean">
               <echo message="Cleaning up folders " />
               <delete dir="${build.dir}"/>
               <delete dir="${service.dir}"/>
               <delete dir="${web-inf.dir}/classes"/>
               <delete dir="${web-inf.dir}/lib"/>
               <echo message="${project.name}.ear, ${project.name}.war, ${project.name}.jar and ${project.name}Client.jar is available in project's ${dist.dir} folder"/>
          </target>
</project>
Generated wsdl(HelloService.wsdl) :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<definitions targetNamespace="http://endpoint.helloservice/" name="HelloService" xmlns:tns="http://endpoint.helloservice/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<xsd:schema>
<xsd:import namespace="http://endpoint.helloservice/" schemaLocation="HelloService_schema1.xsd"/>
</xsd:schema>
</types>
<message name="sayHello">
<part name="parameters" element="tns:sayHello"/>
</message>
<message name="sayHelloResponse">
<part name="parameters" element="tns:sayHelloResponse"/>
</message>
<portType name="Hello">
<operation name="sayHello">
<input message="tns:sayHello"/>
<output message="tns:sayHelloResponse"/>
</operation>
</portType>
<binding name="HelloPortBinding" type="tns:Hello">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="sayHello">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="HelloService">
<port name="HelloPort" binding="tns:HelloPortBinding">
<soap:address location="REPLACE_WITH_ACTUAL_URL"/>
</port>
</service>
</definitions>
Generated : HelloService_schema1.xsd
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xs:schema version="1.0" targetNamespace="http://endpoint.helloservice/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="sayHello" type="ns1:sayHello" xmlns:ns1="http://endpoint.helloservice/"/>
<xs:complexType name="sayHello">
<xs:sequence>
<xs:element name="arg0" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:element name="sayHelloResponse" type="ns2:sayHelloResponse" xmlns:ns2="http://endpoint.helloservice/"/>
<xs:complexType name="sayHelloResponse">
<xs:sequence>
<xs:element name="return" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
If u need any other information let me know.

This has been resolved by uploading relevant jar file

Error while using comments

Similar Messages

Maybe you are looking for